Re: [PATCH v2 2/4] mmc: sdhci_am654: Reset command and data lines on failed tuning

["Mendez, Judith" <jm@ti.com>]

Hi Diogo,

On 8/3/2026 8:47 AM, Diogo Ivo (Schneider Electric) wrote:
> The CMD/DATA reset after tuning should be performed regardless of
> whether tuning succeeded or failed, since tuning data may remain in
> the buffer in either case. Move the error return after the reset so
> that the controller is always cleaned up.
> 
> Fixes: de31f6ab68a3 ("mmc: sdhci_am654: Reset Command and Data line after tuning")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Diogo Ivo (Schneider Electric) <diogo.ivo@bootlin.com>

Reviewed-by: Judith Mendez <jm@ti.com>

> ---
> Changes in v2:
>   - No changes
> ---
>   drivers/mmc/host/sdhci_am654.c | 4 +---
>   1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index 35c3efd92112..0db587e702ac 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -442,15 +442,13 @@ static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
>   	struct sdhci_host *host = mmc_priv(mmc);
>   	int err = sdhci_execute_tuning(mmc, opcode);
>   
> -	if (err)
> -		return err;
>   	/*
>   	 * Tuning data remains in the buffer after tuning.
>   	 * Do a command and data reset to get rid of it
>   	 */
>   	sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
>   
> -	return 0;
> +	return err;
>   }
>   
>   static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)
>