From: <stefanc@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <thomas.petazzoni@bootlin.com>, <davem@davemloft.net>,
<nadavh@marvell.com>, <ymarkman@marvell.com>,
<linux-kernel@vger.kernel.org>, <stefanc@marvell.com>,
<kuba@kernel.org>, <linux@armlinux.org.uk>, <mw@semihalf.com>,
<andrew@lunn.ch>, <rmk+kernel@armlinux.org.uk>,
<atenart@kernel.org>
Subject: [PATCH RFC net-next 03/19] net: mvpp2: add CM3 SRAM memory map
Date: Sun, 10 Jan 2021 17:30:07 +0200 [thread overview]
Message-ID: <1610292623-15564-4-git-send-email-stefanc@marvell.com> (raw)
In-Reply-To: <1610292623-15564-1-git-send-email-stefanc@marvell.com>
From: Stefan Chulski <stefanc@marvell.com>
This patch adds CM3 memory map and CM3 read/write callbacks.
No functionality changes.
Change-Id: Ibae3f5e6695f3454f799568308d349addc730f01
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 7 +++
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 66 +++++++++++++++++++-
2 files changed, 70 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 6bd7e40..aec9179 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -748,6 +748,9 @@
#define MVPP2_TX_FIFO_THRESHOLD(kb) \
((kb) * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
+/* MSS Flow control */
+#define MSS_SRAM_SIZE 0x800
+
/* RX buffer constants */
#define MVPP2_SKB_SHINFO_SIZE \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
@@ -925,6 +928,7 @@ struct mvpp2 {
/* Shared registers' base addresses */
void __iomem *lms_base;
void __iomem *iface_base;
+ void __iomem *cm3_base;
/* On PPv2.2, each "software thread" can access the base
* register through a separate address space, each 64 KB apart
@@ -996,6 +1000,9 @@ struct mvpp2 {
/* page_pool allocator */
struct page_pool *page_pool[MVPP2_PORT_MAX_RXQ];
+
+ /* CM3 SRAM pool */
+ struct gen_pool *sram_pool;
};
struct mvpp2_pcpu_stats {
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 3982956..5267746 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -25,6 +25,7 @@
#include <linux/of_net.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/genalloc.h>
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/phy/phy.h>
@@ -91,6 +92,18 @@ static inline u32 mvpp2_cpu_to_thread(struct mvpp2 *priv, int cpu)
return cpu % priv->nthreads;
}
+static inline
+void mvpp2_cm3_write(struct mvpp2 *priv, u32 offset, u32 data)
+{
+ writel(data, priv->cm3_base + offset);
+}
+
+static inline
+u32 mvpp2_cm3_read(struct mvpp2 *priv, u32 offset)
+{
+ return readl(priv->cm3_base + offset);
+}
+
static struct page_pool *
mvpp2_create_page_pool(struct device *dev, int num, int len,
enum dma_data_direction dma_dir)
@@ -6848,6 +6861,35 @@ static int mvpp2_init(struct platform_device *pdev, struct mvpp2 *priv)
return 0;
}
+static int mvpp2_get_sram(struct platform_device *pdev,
+ struct mvpp2 *priv)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ struct resource *res;
+
+ if (has_acpi_companion(&pdev->dev)) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (!res) {
+ dev_warn(&pdev->dev, "ACPI is too old, TX FC disabled\n");
+ return 0;
+ }
+ priv->cm3_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->cm3_base))
+ return PTR_ERR(priv->cm3_base);
+ } else {
+ priv->sram_pool = of_gen_pool_get(dn, "cm3-mem", 0);
+ if (!priv->sram_pool) {
+ dev_warn(&pdev->dev, "DT is too old, TX FC disabled\n");
+ return 0;
+ }
+ priv->cm3_base = (void __iomem *)gen_pool_alloc(priv->sram_pool,
+ MSS_SRAM_SIZE);
+ if (!priv->cm3_base)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
static int mvpp2_probe(struct platform_device *pdev)
{
const struct acpi_device_id *acpi_id;
@@ -6904,6 +6946,11 @@ static int mvpp2_probe(struct platform_device *pdev)
priv->iface_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->iface_base))
return PTR_ERR(priv->iface_base);
+
+ /* Map CM3 SRAM */
+ err = mvpp2_get_sram(pdev, priv);
+ if (err)
+ dev_warn(&pdev->dev, "Fail to alloc CM3 SRAM\n");
}
if (priv->hw_version == MVPP22 && dev_of_node(&pdev->dev)) {
@@ -6949,11 +6996,13 @@ static int mvpp2_probe(struct platform_device *pdev)
if (dev_of_node(&pdev->dev)) {
priv->pp_clk = devm_clk_get(&pdev->dev, "pp_clk");
- if (IS_ERR(priv->pp_clk))
- return PTR_ERR(priv->pp_clk);
+ if (IS_ERR(priv->pp_clk)) {
+ err = PTR_ERR(priv->pp_clk);
+ goto err_cm3;
+ }
err = clk_prepare_enable(priv->pp_clk);
if (err < 0)
- return err;
+ goto err_cm3;
priv->gop_clk = devm_clk_get(&pdev->dev, "gop_clk");
if (IS_ERR(priv->gop_clk)) {
@@ -7089,6 +7138,11 @@ static int mvpp2_probe(struct platform_device *pdev)
clk_disable_unprepare(priv->gop_clk);
err_pp_clk:
clk_disable_unprepare(priv->pp_clk);
+err_cm3:
+ if (!has_acpi_companion(&pdev->dev) && priv->cm3_base)
+ gen_pool_free(priv->sram_pool, (unsigned long)priv->cm3_base,
+ MSS_SRAM_SIZE);
+
return err;
}
@@ -7129,6 +7183,12 @@ static int mvpp2_remove(struct platform_device *pdev)
aggr_txq->descs_dma);
}
+ if (!has_acpi_companion(&pdev->dev) && priv->cm3_base) {
+ gen_pool_free(priv->sram_pool, (unsigned long)priv->cm3_base,
+ MSS_SRAM_SIZE);
+ gen_pool_destroy(priv->sram_pool);
+ }
+
if (is_acpi_node(port_fwnode))
return 0;
--
1.9.1
next prev parent reply other threads:[~2021-01-10 15:34 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-10 15:30 [PATCH RFC net-next 00/19] net: mvpp2: Add TX Flow Control support stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 01/19] doc: marvell: add cm3-mem device tree bindings description stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 02/19] dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree stefanc
2021-01-10 15:30 ` stefanc [this message]
2021-01-10 17:04 ` [PATCH RFC net-next 03/19] net: mvpp2: add CM3 SRAM memory map Andrew Lunn
2021-01-10 17:10 ` [EXT] " Stefan Chulski
2021-01-10 17:43 ` Andrew Lunn
2021-01-10 17:49 ` Stefan Chulski
2021-01-10 17:55 ` Russell King - ARM Linux admin
2021-01-10 17:57 ` [EXT] " Stefan Chulski
2021-01-10 18:03 ` Andrew Lunn
2021-01-10 18:09 ` Stefan Chulski
2021-01-10 18:27 ` Russell King - ARM Linux admin
2021-01-10 15:30 ` [PATCH RFC net-next 04/19] net: mvpp2: add PPv23 version definition stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 05/19] net: mvpp2: always compare hw-version vs MVPP21 stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 06/19] net: mvpp2: increase BM pool size to 2048 buffers stefanc
2021-01-10 17:13 ` Andrew Lunn
2021-01-10 17:23 ` [EXT] " Stefan Chulski
2021-01-10 15:30 ` [PATCH RFC net-next 07/19] net: mvpp2: increase RXQ size to 1024 descriptors stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 08/19] net: mvpp2: add FCA periodic timer configurations stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 09/19] net: mvpp2: add FCA RXQ non occupied descriptor threshold stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 10/19] net: mvpp2: add spinlock for FW FCA configuration path stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 11/19] net: mvpp2: add flow control RXQ and BM pool config callbacks stefanc
2021-01-10 18:06 ` Russell King - ARM Linux admin
2021-01-10 18:24 ` [EXT] " Stefan Chulski
2021-01-10 18:31 ` Russell King - ARM Linux admin
2021-01-10 18:38 ` Stefan Chulski
2021-01-10 15:30 ` [PATCH RFC net-next 12/19] net: mvpp2: enable global flow control stefanc
2021-01-10 18:09 ` Russell King - ARM Linux admin
2021-01-10 15:30 ` [PATCH RFC net-next 13/19] net: mvpp2: add RXQ flow control configurations stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 14/19] net: mvpp2: add ethtool flow control configuration support stefanc
2021-01-10 17:33 ` Andrew Lunn
2021-01-10 17:53 ` [EXT] " Stefan Chulski
2021-01-10 18:15 ` Russell King - ARM Linux admin
2021-01-10 18:27 ` [EXT] " Stefan Chulski
2021-01-10 18:33 ` Russell King - ARM Linux admin
2021-01-10 15:30 ` [PATCH RFC net-next 15/19] net: mvpp2: add BM protection underrun feature support stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 16/19] net: mvpp2: add PPv23 RX FIFO flow control stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 17/19] net: mvpp2: set 802.3x GoP Flow Control mode stefanc
2021-01-10 15:30 ` [PATCH RFC net-next 18/19] net: mvpp2: add ring size validation before enabling FC stefanc
2021-01-10 17:37 ` Andrew Lunn
2021-01-10 15:30 ` [PATCH RFC net-next 19/19] net: mvpp2: add TX FC firmware check stefanc
2021-01-10 18:17 ` [PATCH RFC net-next 00/19] net: mvpp2: Add TX Flow Control support Russell King - ARM Linux admin
2021-01-10 18:55 ` [EXT] " Stefan Chulski
2021-01-10 19:01 ` Russell King - ARM Linux admin
2021-01-10 19:08 ` Andrew Lunn
2021-01-10 19:11 ` Stefan Chulski
2021-01-10 19:20 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1610292623-15564-4-git-send-email-stefanc@marvell.com \
--to=stefanc@marvell.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox