From: John covici <covici@ccs.covici.com>
To: linux-kernel@vger.kernel.org
Subject: e1000 not working using 2.6.11
Date: Thu, 9 Jun 2005 16:06:34 -0400 [thread overview]
Message-ID: <17064.41290.461755.920152@ccs.covici.com> (raw)
Hi. I am not getting good results on a box I have which uses an Intel
Pro gigabit Ethernet driver for its network connection. What happens
is that I get messages like watchdog xmit timeout and lots of errors
out of ifconfig. Here is the listpci entry for that card. It works
under the other OS, so I imagine the hardware is OK.
0000:01:0b.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 3013
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
Memory at e7000000 (64-bit, non-prefetchable) [size=128K]
Memory at e7020000 (64-bit, non-prefetchable) [size=64K]
I/O ports at b400 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Any assistance would be appreciated.
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
covici@ccs.covici.com
next reply other threads:[~2005-06-09 20:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-09 20:06 John covici [this message]
2005-06-11 19:37 ` e1000 not working using 2.6.11 Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17064.41290.461755.920152@ccs.covici.com \
--to=covici@ccs.covici.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox