public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* e1000 not working using 2.6.11
@ 2005-06-09 20:06 John covici
  2005-06-11 19:37 ` Adrian Bunk
  0 siblings, 1 reply; 2+ messages in thread
From: John covici @ 2005-06-09 20:06 UTC (permalink / raw)
  To: linux-kernel

Hi.  I am not getting good results on a box I have which uses an Intel
Pro gigabit Ethernet driver for its network connection.  What happens
is that I get messages like watchdog xmit timeout and lots of errors
out of ifconfig.  Here is the listpci entry for that card.  It works
under the other OS, so I imagine the hardware is OK.

0000:01:0b.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
        Subsystem: Intel Corp.: Unknown device 3013
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
        Memory at e7000000 (64-bit, non-prefetchable) [size=128K]
        Memory at e7020000 (64-bit, non-prefetchable) [size=64K]
        I/O ports at b400 [size=64]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device.
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-


Any assistance would be appreciated.
 

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@ccs.covici.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-06-11 19:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-09 20:06 e1000 not working using 2.6.11 John covici
2005-06-11 19:37 ` Adrian Bunk

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox