* [PATCH net-next v3] ipv4: ip_gre: Fix set but not used warning in ipgre_err() if IPv4-only
@ 2025-02-04 21:36 Geert Uytterhoeven
2025-02-06 3:00 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2025-02-04 21:36 UTC (permalink / raw)
To: David S . Miller, David Ahern, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Simon Horman, Kuniyuki Iwashima
Cc: netdev, linux-kernel, Geert Uytterhoeven, kernel test robot
if CONFIG_NET_IPGRE is enabled, but CONFIG_IPV6 is disabled:
net/ipv4/ip_gre.c: In function ‘ipgre_err’:
net/ipv4/ip_gre.c:144:22: error: variable ‘data_len’ set but not used [-Werror=unused-but-set-variable]
144 | unsigned int data_len = 0;
| ^~~~~~~~
Fix this by moving all data_len processing inside the IPV6-only section
that uses its result.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501121007.2GofXmh5-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Simon Horman <horms@kernel.org>
---
v3:
- Add Reviewed-by,
v2:
- Do not use the ternary operator,
- Target net-next.
---
net/ipv4/ip_gre.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index ed1b6b44faf8049e..c9f11a046c263005 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -141,7 +141,6 @@ static int ipgre_err(struct sk_buff *skb, u32 info,
const struct iphdr *iph;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
- unsigned int data_len = 0;
struct ip_tunnel *t;
if (tpi->proto == htons(ETH_P_TEB))
@@ -182,7 +181,6 @@ static int ipgre_err(struct sk_buff *skb, u32 info,
case ICMP_TIME_EXCEEDED:
if (code != ICMP_EXC_TTL)
return 0;
- data_len = icmp_hdr(skb)->un.reserved[1] * 4; /* RFC 4884 4.1 */
break;
case ICMP_REDIRECT:
@@ -190,10 +188,16 @@ static int ipgre_err(struct sk_buff *skb, u32 info,
}
#if IS_ENABLED(CONFIG_IPV6)
- if (tpi->proto == htons(ETH_P_IPV6) &&
- !ip6_err_gen_icmpv6_unreach(skb, iph->ihl * 4 + tpi->hdr_len,
- type, data_len))
- return 0;
+ if (tpi->proto == htons(ETH_P_IPV6)) {
+ unsigned int data_len = 0;
+
+ if (type == ICMP_TIME_EXCEEDED)
+ data_len = icmp_hdr(skb)->un.reserved[1] * 4; /* RFC 4884 4.1 */
+
+ if (!ip6_err_gen_icmpv6_unreach(skb, iph->ihl * 4 + tpi->hdr_len,
+ type, data_len))
+ return 0;
+ }
#endif
if (t->parms.iph.daddr == 0 ||
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net-next v3] ipv4: ip_gre: Fix set but not used warning in ipgre_err() if IPv4-only
2025-02-04 21:36 [PATCH net-next v3] ipv4: ip_gre: Fix set but not used warning in ipgre_err() if IPv4-only Geert Uytterhoeven
@ 2025-02-06 3:00 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2025-02-06 3:00 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: davem, dsahern, edumazet, kuba, pabeni, horms, kuniyu, netdev,
linux-kernel, lkp
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Tue, 4 Feb 2025 22:36:54 +0100 you wrote:
> if CONFIG_NET_IPGRE is enabled, but CONFIG_IPV6 is disabled:
>
> net/ipv4/ip_gre.c: In function ‘ipgre_err’:
> net/ipv4/ip_gre.c:144:22: error: variable ‘data_len’ set but not used [-Werror=unused-but-set-variable]
> 144 | unsigned int data_len = 0;
> | ^~~~~~~~
>
> [...]
Here is the summary with links:
- [net-next,v3] ipv4: ip_gre: Fix set but not used warning in ipgre_err() if IPv4-only
https://git.kernel.org/netdev/net-next/c/50f37fc2a39c
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-02-06 3:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-02-04 21:36 [PATCH net-next v3] ipv4: ip_gre: Fix set but not used warning in ipgre_err() if IPv4-only Geert Uytterhoeven
2025-02-06 3:00 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox