[PATCH net v3] ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()

[PATCH net v3] ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()

[Andrea Mayer]

ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.

When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.

Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:

 BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
 Read of size 4 at addr 00000000000006b4 by task ping6/394

 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
 Call Trace:
  <IRQ>
  kasan_report+0xc6/0x100
  ipv6_rpl_srh_rcv+0xb3/0x1070
  ip6_protocol_deliver_rcu+0x759/0x9a0
  ip6_input_finish+0xa8/0x1b0
  ip6_input+0xe1/0x490
  ipv6_rcv+0x33d/0x460
  __netif_receive_skb_one_core+0xd6/0x130
  process_backlog+0x2cc/0xa00
  __napi_poll.constprop.0+0x56/0x270
  net_rx_action+0x327/0x730
  handle_softirqs+0x11e/0x630
  do_softirq+0xb3/0xf0
  </IRQ>

Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.

Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths.

Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Xiang Mei <xmei5@asu.edu>
---
v3:
  - move the idev NULL check into ipv6_rthdr_rcv() and use the same drop
    reason on the seg6 and RPL paths (David Ahern)
  - pass idev to ipv6_srh_rcv() and ipv6_rpl_srh_rcv(), and check it for
    NULL in ipv6_rthdr_rcv() only for the seg6 and RPL types
  - add Xiang Mei's Tested-by tag
v2: https://lore.kernel.org/netdev/20260518140630.24280-1-andrea.mayer@uniroma2.it/
  - use SKB_DROP_REASON_IPV6DISABLED as drop reason (Eric Dumazet)
v1: https://lore.kernel.org/netdev/20260428224816.11223-1-andrea.mayer@uniroma2.it/
---
 net/ipv6/exthdrs.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 9c677eb1d1a6..51941ad656a3 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -368,23 +368,16 @@ static void seg6_update_csum(struct sk_buff *skb)
 			   (__be32 *)addr);
 }
 
-static int ipv6_srh_rcv(struct sk_buff *skb)
+static int ipv6_srh_rcv(struct sk_buff *skb, struct inet6_dev *idev)
 {
 	struct inet6_skb_parm *opt = IP6CB(skb);
 	struct net *net = dev_net(skb->dev);
 	struct ipv6_sr_hdr *hdr;
-	struct inet6_dev *idev;
 	struct in6_addr *addr;
 	int accept_seg6;
 
 	hdr = (struct ipv6_sr_hdr *)skb_transport_header(skb);
 
-	idev = __in6_dev_get(skb->dev);
-	if (!idev) {
-		kfree_skb(skb);
-		return -1;
-	}
-
 	accept_seg6 = min(READ_ONCE(net->ipv6.devconf_all->seg6_enabled),
 			  READ_ONCE(idev->cnf.seg6_enabled));
 
@@ -485,12 +478,11 @@ static int ipv6_srh_rcv(struct sk_buff *skb)
 	return -1;
 }
 
-static int ipv6_rpl_srh_rcv(struct sk_buff *skb)
+static int ipv6_rpl_srh_rcv(struct sk_buff *skb, struct inet6_dev *idev)
 {
 	struct ipv6_rpl_sr_hdr *hdr, *ohdr, *chdr;
 	struct inet6_skb_parm *opt = IP6CB(skb);
 	struct net *net = dev_net(skb->dev);
-	struct inet6_dev *idev;
 	struct ipv6hdr *oldhdr;
 	unsigned int chdr_len;
 	unsigned char *buf;
@@ -499,8 +491,6 @@ static int ipv6_rpl_srh_rcv(struct sk_buff *skb)
 	u64 n = 0;
 	u32 r;
 
-	idev = __in6_dev_get(skb->dev);
-
 	accept_rpl_seg = min(READ_ONCE(net->ipv6.devconf_all->rpl_seg_enabled),
 			     READ_ONCE(idev->cnf.rpl_seg_enabled));
 	if (!accept_rpl_seg) {
@@ -689,10 +679,14 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 	switch (hdr->type) {
 	case IPV6_SRCRT_TYPE_4:
 		/* segment routing */
-		return ipv6_srh_rcv(skb);
+		if (!idev)
+			goto disabled;
+		return ipv6_srh_rcv(skb, idev);
 	case IPV6_SRCRT_TYPE_3:
 		/* rpl segment routing */
-		return ipv6_rpl_srh_rcv(skb);
+		if (!idev)
+			goto disabled;
+		return ipv6_rpl_srh_rcv(skb, idev);
 	default:
 		break;
 	}
@@ -837,6 +831,10 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 			  (&hdr->type) - skb_network_header(skb));
 	return -1;
+
+disabled:
+	kfree_skb_reason(skb, SKB_DROP_REASON_IPV6DISABLED);
+	return -1;
 }
 
 static const struct inet6_protocol rthdr_protocol = {
-- 
2.43.0

Re: [PATCH net v3] ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()

[Simon Horman]

On Mon, Aug 17, 2026 at 03:26:44PM +0200, Andrea Mayer wrote:
> ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
> check when reading idev->cnf.rpl_seg_enabled.
> 
> When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
> dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
> check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
> dev->ip6_ptr already NULL.
> 
> Reproduced by flooding the receiving interface with ping6 traffic while
> flapping its MTU between 1500 and 1200:
> 
>  BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
>  Read of size 4 at addr 00000000000006b4 by task ping6/394
> 
>  CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
>  Call Trace:
>   <IRQ>
>   kasan_report+0xc6/0x100
>   ipv6_rpl_srh_rcv+0xb3/0x1070
>   ip6_protocol_deliver_rcu+0x759/0x9a0
>   ip6_input_finish+0xa8/0x1b0
>   ip6_input+0xe1/0x490
>   ipv6_rcv+0x33d/0x460
>   __netif_receive_skb_one_core+0xd6/0x130
>   process_backlog+0x2cc/0xa00
>   __napi_poll.constprop.0+0x56/0x270
>   net_rx_action+0x327/0x730
>   handle_softirqs+0x11e/0x630
>   do_softirq+0xb3/0xf0
>   </IRQ>
> 
> Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
> ipv6_rthdr_rcv(), which already has an idev lookup.
> 
> Fix the NULL dereference on the RPL path by checking idev in
> ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
> an argument and no longer call __in6_dev_get(), so the packet is now
> dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths.
> 
> Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
> Cc: stable@vger.kernel.org
> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
> Tested-by: Xiang Mei <xmei5@asu.edu>
> ---
> v3:
>   - move the idev NULL check into ipv6_rthdr_rcv() and use the same drop
>     reason on the seg6 and RPL paths (David Ahern)
>   - pass idev to ipv6_srh_rcv() and ipv6_rpl_srh_rcv(), and check it for
>     NULL in ipv6_rthdr_rcv() only for the seg6 and RPL types
>   - add Xiang Mei's Tested-by tag
> v2: https://lore.kernel.org/netdev/20260518140630.24280-1-andrea.mayer@uniroma2.it/
>   - use SKB_DROP_REASON_IPV6DISABLED as drop reason (Eric Dumazet)
> v1: https://lore.kernel.org/netdev/20260428224816.11223-1-andrea.mayer@uniroma2.it/

Reviewed-by: Simon Horman <horms@kernel.org>

Re: [PATCH net v3] ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Mon, 17 Aug 2026 15:26:44 +0200 you wrote:
> ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
> check when reading idev->cnf.rpl_seg_enabled.
> 
> When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
> dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
> check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
> dev->ip6_ptr already NULL.
> 
> [...]

Here is the summary with links:
  - [net,v3] ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
    https://git.kernel.org/netdev/net/c/f826df95332c

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html