* 2.4.19pre10aa4
@ 2002-06-20 17:00 Andrea Arcangeli
2002-06-21 7:31 ` 2.4.19pre10aa4 & Intel EtherExpress driver "e100" Andrey Nekrasov
0 siblings, 1 reply; 5+ messages in thread
From: Andrea Arcangeli @ 2002-06-20 17:00 UTC (permalink / raw)
To: linux-kernel
This fixes a mistake from my part in task_rq_lock and integrates the
latest version of e100 e1000 per jam's suggestion, it works again on
alpha (was a tux compile trouble).
URL:
http://www.us.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.19pre10aa4.gz
http://www.us.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.19pre10aa4/
Only in 2.4.19pre10aa4: 00_e100-2.0.30-k1.gz
Only in 2.4.19pre10aa4: 00_e1000-4.2.17-k1.gz
Only in 2.4.19pre10aa3: 07_e100-1.8.38.gz
Only in 2.4.19pre10aa3: 08_e100-includes-1
Only in 2.4.19pre10aa3: 09_e100-compilehack-1
e100 and e1000 from 2.4.19pre10jam2.
Only in 2.4.19pre10aa3: 20_o1-sched-updates-A4-1
Only in 2.4.19pre10aa4: 20_o1-sched-updates-A4-2
Cleanup alpha and fix lock_rq_task.
Only in 2.4.19pre10aa4: 61_tux-alpha-compile-1
Fix compile problem with tux on alpha.
Andrea
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.4.19pre10aa4 & Intel EtherExpress driver "e100".
2002-06-20 17:00 2.4.19pre10aa4 Andrea Arcangeli
@ 2002-06-21 7:31 ` Andrey Nekrasov
2002-07-05 10:08 ` Andrea Arcangeli
0 siblings, 1 reply; 5+ messages in thread
From: Andrey Nekrasov @ 2002-06-21 7:31 UTC (permalink / raw)
To: Andrea Arcangeli, lkml
Hello.
1. My hardware:
M/B Intel STL2:
- ServerWorks ServerSet III LE chipset).
- Integrated on-board Intel EtherExpress PRO100+ 10/100mbit PCI controller
(Intel 82559)
2. Problem:
2.4.19pre10aa3 - load kernel & driver ok, work.
...
Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.8.38 Copyright (c) 2002 Intel Corporation
eth0: Intel(R) 8255x-based Ethernet Adapter
Mem:0xfb101000 IRQ:18 Speed:100 Mbps Dx:Full
Hardware receive checksums enabled cpu cycle saver enabled
...
2.4.19pre10aa4 :
....
Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 2.0.30-k1
Copyright (c) 2002 Intel Corporation
hw init failed
Failed to initialize e100, instance #0
....
Whay?
> This fixes a mistake from my part in task_rq_lock and integrates the
> latest version of e100 e1000 per jam's suggestion, it works again on
> alpha (was a tux compile trouble).
>
> URL:
>
> http://www.us.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.19pre10aa4.gz
> http://www.us.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.19pre10aa4/
>
> Only in 2.4.19pre10aa4: 00_e100-2.0.30-k1.gz
> Only in 2.4.19pre10aa4: 00_e1000-4.2.17-k1.gz
> Only in 2.4.19pre10aa3: 07_e100-1.8.38.gz
> Only in 2.4.19pre10aa3: 08_e100-includes-1
> Only in 2.4.19pre10aa3: 09_e100-compilehack-1
>
> e100 and e1000 from 2.4.19pre10jam2.
>
> Only in 2.4.19pre10aa3: 20_o1-sched-updates-A4-1
> Only in 2.4.19pre10aa4: 20_o1-sched-updates-A4-2
>
> Cleanup alpha and fix lock_rq_task.
>
> Only in 2.4.19pre10aa4: 61_tux-alpha-compile-1
>
> Fix compile problem with tux on alpha.
>
> Andrea
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
bye.
Andrey Nekrasov, SpyLOG.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: 2.4.19pre10aa4 & Intel EtherExpress driver "e100".
2002-06-21 7:31 ` 2.4.19pre10aa4 & Intel EtherExpress driver "e100" Andrey Nekrasov
@ 2002-07-05 10:08 ` Andrea Arcangeli
2002-07-05 14:07 ` Zwane Mwaikambo
0 siblings, 1 reply; 5+ messages in thread
From: Andrea Arcangeli @ 2002-07-05 10:08 UTC (permalink / raw)
To: Andrey Nekrasov; +Cc: linux-kernel
On Fri, Jun 21, 2002 at 11:31:40AM +0400, Andrey Nekrasov wrote:
> Hello.
>
> 1. My hardware:
>
> M/B Intel STL2:
> - ServerWorks ServerSet III LE chipset).
> - Integrated on-board Intel EtherExpress PRO100+ 10/100mbit PCI controller
> (Intel 82559)
>
>
> 2. Problem:
>
> 2.4.19pre10aa3 - load kernel & driver ok, work.
> ...
> Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.8.38 Copyright (c) 2002 Intel Corporation
> eth0: Intel(R) 8255x-based Ethernet Adapter
> Mem:0xfb101000 IRQ:18 Speed:100 Mbps Dx:Full
> Hardware receive checksums enabled cpu cycle saver enabled
> ...
>
>
> 2.4.19pre10aa4 :
> ....
> Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 2.0.30-k1
> Copyright (c) 2002 Intel Corporation
>
> hw init failed
> Failed to initialize e100, instance #0
> ....
>
>
> Whay?
because I upgreaded the driver to 2.0.30 from jam2. Due your report I
backed out 2.0.30 from rc1aa1 and I returned to 1.8.38.
Can you confirm rc1aa1 works again? in next -aa I'll upgrade again to
the 2.0.30-k release using another patch to see if it still malfunction
for you.
Andrea
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.4.19pre10aa4 & Intel EtherExpress driver "e100".
2002-07-05 10:08 ` Andrea Arcangeli
@ 2002-07-05 14:07 ` Zwane Mwaikambo
2002-07-05 15:26 ` Andrey Nekrasov
0 siblings, 1 reply; 5+ messages in thread
From: Zwane Mwaikambo @ 2002-07-05 14:07 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrey Nekrasov, linux-kernel
Hi Andrea, Audrey,
On Fri, 5 Jul 2002, Andrea Arcangeli wrote:
> On Fri, Jun 21, 2002 at 11:31:40AM +0400, Andrey Nekrasov wrote:
> > Hello.
> >
> > 1. My hardware:
> >
> > M/B Intel STL2:
> > - ServerWorks ServerSet III LE chipset).
> > - Integrated on-board Intel EtherExpress PRO100+ 10/100mbit PCI controller
> > (Intel 82559)
Do we have the same hardware?
OEM ID: INTEL Product ID: STL2 APIC at: 0xFEE00000
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a)
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
01:04.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
01:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
01:0b.0 RAID bus controller: IBM Netfinity ServeRAID controller
Linux version 2.4.19-rc1-aa1-zm1 (zwane@lserver.waterford.sz) (gcc version
2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #6 SMP Mon Jul 1 14:07:40 SAST
2002
> Can you confirm rc1aa1 works again? in next -aa I'll upgrade again to
> the 2.0.30-k release using another patch to see if it still malfunction
> for you.
I've got that machine on a couple of days uptime serving 4G+ a day via
that network card. All good so far.
Cheers,
Zwane Mwaikambo
--
http://function.linuxpower.ca
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.4.19pre10aa4 & Intel EtherExpress driver "e100".
2002-07-05 14:07 ` Zwane Mwaikambo
@ 2002-07-05 15:26 ` Andrey Nekrasov
0 siblings, 0 replies; 5+ messages in thread
From: Andrey Nekrasov @ 2002-07-05 15:26 UTC (permalink / raw)
To: Zwane Mwaikambo; +Cc: Andrea Arcangeli, linux-kernel
Hello Zwane Mwaikambo,
> > > M/B Intel STL2:
> > > - ServerWorks ServerSet III LE chipset).
> > > - Integrated on-board Intel EtherExpress PRO100+ 10/100mbit PCI controller
> > > (Intel 82559)
>
> Do we have the same hardware?
Yes.
> OEM ID: INTEL Product ID: STL2 APIC at: 0xFEE00000
>
> 00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
> 00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
> 00:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a)
> 00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
> 00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
> 00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
> 01:04.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
> 01:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
> 01:0b.0 RAID bus controller: IBM Netfinity ServeRAID controller
>
> Linux version 2.4.19-rc1-aa1-zm1 (zwane@lserver.waterford.sz) (gcc version
> 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #6 SMP Mon Jul 1 14:07:40 SAST
> 2002
Linux 2.4.19-rc1aa1 - work OK.
> > Can you confirm rc1aa1 works again? in next -aa I'll upgrade again to
> > the 2.0.30-k release using another patch to see if it still malfunction
> > for you.
>
> I've got that machine on a couple of days uptime serving 4G+ a day via
> that network card. All good so far.
>
> Cheers,
> Zwane Mwaikambo
> --
> http://function.linuxpower.ca
>
>
--
bye.
Andrey Nekrasov, SpyLOG.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-07-05 15:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-20 17:00 2.4.19pre10aa4 Andrea Arcangeli
2002-06-21 7:31 ` 2.4.19pre10aa4 & Intel EtherExpress driver "e100" Andrey Nekrasov
2002-07-05 10:08 ` Andrea Arcangeli
2002-07-05 14:07 ` Zwane Mwaikambo
2002-07-05 15:26 ` Andrey Nekrasov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox