Cdrom broken in bk current?

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Cdrom broken in bk current?
@ 2002-11-03  8:05 Leopold Gouverneur
  2002-11-03  9:43 ` Jens Axboe
  0 siblings, 1 reply; 5+ messages in thread
From: Leopold Gouverneur @ 2002-11-03  8:05 UTC (permalink / raw)
  To: linux-kernel

I see the following during booting:
...
end_request: I/O error, dev hdc, sector 0
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdd, sector 0
end_request: I/O error, dev hdd, sector 0
hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA
...

If I mount /dev/hd[cd], the system freezes completly.

This was not present in 2.5.42 IRC
ny help?

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Cdrom broken in bk current?
  2002-11-03  8:05 Cdrom broken in bk current? Leopold Gouverneur
@ 2002-11-03  9:43 ` Jens Axboe
  2002-11-04 23:38   ` Leopold Gouverneur
  0 siblings, 1 reply; 5+ messages in thread
From: Jens Axboe @ 2002-11-03  9:43 UTC (permalink / raw)
  To: Leopold Gouverneur; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]

On Sun, Nov 03 2002, Leopold Gouverneur wrote:
> I see the following during booting:
> ...
> end_request: I/O error, dev hdc, sector 0
> hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.12
> end_request: I/O error, dev hdc, sector 0
> end_request: I/O error, dev hdd, sector 0
> end_request: I/O error, dev hdd, sector 0
> hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA
> ...
> 
> If I mount /dev/hd[cd], the system freezes completly.
> 
> This was not present in 2.5.42 IRC
> ny help?

Try with this patch.

-- 
Jens Axboe


[-- Attachment #2: idecd-cdb-size-2 --]
[-- Type: text/plain, Size: 1094 bytes --]

===== drivers/ide/ide-cd.c 1.27 vs edited =====
--- 1.27/drivers/ide/ide-cd.c	Fri Oct 18 20:02:55 2002
+++ edited/drivers/ide/ide-cd.c	Sun Nov  3 10:33:17 2002
@@ -310,6 +310,7 @@
 #include <linux/completion.h>
 
 #include <scsi/scsi.h>	/* For SCSI -> ATAPI command conversion */
+#include "../scsi/scsi.h"
 
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -877,10 +878,10 @@
 					  ide_handler_t *handler)
 {
 	unsigned char *cmd_buf	= rq->cmd;
-	int cmd_len		= sizeof(rq->cmd);
 	unsigned int timeout	= rq->timeout;
 	struct cdrom_info *info = drive->driver_data;
 	ide_startstop_t startstop;
+	unsigned int cmd_len;
 
 	if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
 		/* Here we should have been called after receiving an interrupt
@@ -902,6 +903,11 @@
 
 	/* Arm the interrupt handler. */
 	ide_set_handler(drive, handler, timeout, cdrom_timer_expiry);
+
+	/* cdb length, pad upto the 12th byte if necessary */
+	cmd_len = COMMAND_SIZE(rq->cmd[0]);
+	if (cmd_len < 12)
+		cmd_len = 12;
 
 	/* Send the command to the device. */
 	HWIF(drive)->atapi_output_bytes(drive, cmd_buf, cmd_len);

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Cdrom broken in bk current?
  2002-11-03  9:43 ` Jens Axboe
@ 2002-11-04 23:38   ` Leopold Gouverneur
  2002-11-05  7:04     ` Jens Axboe
  0 siblings, 1 reply; 5+ messages in thread
From: Leopold Gouverneur @ 2002-11-04 23:38 UTC (permalink / raw)
  To: Jens Axboe; +Cc: linux-kernel

On Sun, Nov 03, 2002 at 10:43:06AM +0100, Jens Axboe wrote:
> On Sun, Nov 03 2002, Leopold Gouverneur wrote:
> > I see the following during booting:
> > ...
> > end_request: I/O error, dev hdc, sector 0
> > hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
> > Uniform CD-ROM driver Revision: 3.12
> > end_request: I/O error, dev hdc, sector 0
> > end_request: I/O error, dev hdd, sector 0
> > end_request: I/O error, dev hdd, sector 0
> > hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA
> > ...
> > 
> > If I mount /dev/hd[cd], the system freezes completly.
> > 
> > This was not present in 2.5.42 IRC
> > ny help?
> 
> Try with this patch.
> 
> -- 
> Jens Axboe
> 

> ===== drivers/ide/ide-cd.c 1.27 vs edited =====
> --- 1.27/drivers/ide/ide-cd.c	Fri Oct 18 20:02:55 2002
> +++ edited/drivers/ide/ide-cd.c	Sun Nov  3 10:33:17 2002
> @@ -310,6 +310,7 @@
>  #include <linux/completion.h>
>  
>  #include <scsi/scsi.h>	/* For SCSI -> ATAPI command conversion */
> +#include "../scsi/scsi.h"
>  
>  #include <asm/irq.h>
>  #include <asm/io.h>
> @@ -877,10 +878,10 @@
>  					  ide_handler_t *handler)
>  {
>  	unsigned char *cmd_buf	= rq->cmd;
> -	int cmd_len		= sizeof(rq->cmd);
>  	unsigned int timeout	= rq->timeout;
>  	struct cdrom_info *info = drive->driver_data;
>  	ide_startstop_t startstop;
> +	unsigned int cmd_len;
>  
>  	if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
>  		/* Here we should have been called after receiving an interrupt
> @@ -902,6 +903,11 @@
>  
>  	/* Arm the interrupt handler. */
>  	ide_set_handler(drive, handler, timeout, cdrom_timer_expiry);
> +
> +	/* cdb length, pad upto the 12th byte if necessary */
> +	cmd_len = COMMAND_SIZE(rq->cmd[0]);
> +	if (cmd_len < 12)
> +		cmd_len = 12;
>  
>  	/* Send the command to the device. */
>  	HWIF(drive)->atapi_output_bytes(drive, cmd_buf, cmd_len);

I tried your patch without success. The problem is still there in 2.5.46


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: Cdrom broken in bk current?
  2002-11-04 23:38   ` Leopold Gouverneur
@ 2002-11-05  7:04     ` Jens Axboe
       [not found]       ` <20021105161720.GA4968@gouv>
  0 siblings, 1 reply; 5+ messages in thread
From: Jens Axboe @ 2002-11-05  7:04 UTC (permalink / raw)
  To: Leopold Gouverneur; +Cc: linux-kernel

On Tue, Nov 05 2002, Leopold Gouverneur wrote:
> On Sun, Nov 03, 2002 at 10:43:06AM +0100, Jens Axboe wrote:
> > On Sun, Nov 03 2002, Leopold Gouverneur wrote:
> > > I see the following during booting:
> > > ...
> > > end_request: I/O error, dev hdc, sector 0
> > > hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
> > > Uniform CD-ROM driver Revision: 3.12
> > > end_request: I/O error, dev hdc, sector 0
> > > end_request: I/O error, dev hdd, sector 0
> > > end_request: I/O error, dev hdd, sector 0
> > > hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA
> > > ...
> > > 
> > > If I mount /dev/hd[cd], the system freezes completly.
> > > 
> > > This was not present in 2.5.42 IRC
> > > ny help?
> > 
> > Try with this patch.
> > 
> > -- 
> > Jens Axboe
> > 
> 
> > ===== drivers/ide/ide-cd.c 1.27 vs edited =====
> > --- 1.27/drivers/ide/ide-cd.c	Fri Oct 18 20:02:55 2002
> > +++ edited/drivers/ide/ide-cd.c	Sun Nov  3 10:33:17 2002
> > @@ -310,6 +310,7 @@
> >  #include <linux/completion.h>
> >  
> >  #include <scsi/scsi.h>	/* For SCSI -> ATAPI command conversion */
> > +#include "../scsi/scsi.h"
> >  
> >  #include <asm/irq.h>
> >  #include <asm/io.h>
> > @@ -877,10 +878,10 @@
> >  					  ide_handler_t *handler)
> >  {
> >  	unsigned char *cmd_buf	= rq->cmd;
> > -	int cmd_len		= sizeof(rq->cmd);
> >  	unsigned int timeout	= rq->timeout;
> >  	struct cdrom_info *info = drive->driver_data;
> >  	ide_startstop_t startstop;
> > +	unsigned int cmd_len;
> >  
> >  	if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
> >  		/* Here we should have been called after receiving an interrupt
> > @@ -902,6 +903,11 @@
> >  
> >  	/* Arm the interrupt handler. */
> >  	ide_set_handler(drive, handler, timeout, cdrom_timer_expiry);
> > +
> > +	/* cdb length, pad upto the 12th byte if necessary */
> > +	cmd_len = COMMAND_SIZE(rq->cmd[0]);
> > +	if (cmd_len < 12)
> > +		cmd_len = 12;
> >  
> >  	/* Send the command to the device. */
> >  	HWIF(drive)->atapi_output_bytes(drive, cmd_buf, cmd_len);
> 
> I tried your patch without success. The problem is still there in 2.5.46

Please verify that 2.5.42 works correctly, and send me the boot log of
such a boot.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 5+ messages in thread

[parent not found: <20021105161720.GA4968@gouv>]

[parent not found: <20021105174540.GA3515@suse.de>]

* Kernel Bug at drivers/ide/ide-cd.c: 860!
       [not found]         ` <20021105174540.GA3515@suse.de>
@ 2002-11-09 15:21           ` Leopold Gouverneur
  0 siblings, 0 replies; 5+ messages in thread
From: Leopold Gouverneur @ 2002-11-09 15:21 UTC (permalink / raw)
  To: Jens Axboe; +Cc: linux-kernel

On Tue, Nov 05, 2002 at 06:45:40PM +0100, Jens Axboe wrote:
> On Tue, Nov 05 2002, Leopold Gouverneur wrote:
> > I tried 2.5.43 with mixed results. In dmesg i see:
> 
> 2.5.42 is the one you should test, like I said in the mail.
> 
> > But I am still able to mount /dev/hdc and /dev/hdd
> > Hope it helps. Thanx for caring!
> 
> So 2.5.43 sort-of works?
> 
> -- 
> Jens Axboe
Sorry to bother you again but I am still unables to mount cdroms in Bk
current.  I was able to get some messages on the console( copied by
hand):

hdd: cdrom_decode_status: status=0xd0 {Busy}
hdd: cdrom_decode_status: error=0xd0LastFailedSense 0x0d
hdd: DMA disabled

-----------------[cut here]-------------------
Kernel BUG at drivers/ide/ide-cd.c:860!
invalid operand: 0000
ip_state ipt_Log ip_tables ip_conntrack_ftp ip_conntrack
CPU: 1
EIP: 0060:[<c01f0f74>]  Not tainted
EFLAGS: 00010282
eax: c01e4210 ebx: c033cfc0 ecx:00008000 edx: c033ec94
esi: c1398600 edi: c01f1770 ebp: 00000040 esp: c12bfe28
ds: oo6 es: 0068 ss: 0068
Process swapper( pid:0 threadinfo=c12bc000 task=c1290660 )
Stack: 00000000 00000376 00000000 00000080 0000001e c137eaa0 c137eaa0
       c033efc0 c1398600 c01f1af0 c033efc0 00008000 c01f1770 c033efc0
       c137eaa0 c1398600 c01f2925 c033efc0 00000040 00888898 c033efc0
       00000040 c137eaa0 00000000
Call Trace:[<c01f1af0>][<c01f1770>][<c01f2925>][<c01e926b>][<c01e947f>]
[<c01e97b3>][<c01e9670>][<c0128ef8>][c0124ac7>][<c01247e5>][c0107070>]

Passing it through ksymoops, I get:

ksymoops 2.4.6 on i686 2.5.46.  Options used
     -v /usr/src/linus-2.5/vmlinux (specified)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.5.46/ (default)
     -m /usr/src/linus-2.5/System.map (specified)

Kernel BUG at drivers/ide/ide-cd.c:860!
invalid operand: 0000
CPU: 1
EIP: 0060:[<c01f0f74>]  Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: c01e4210 ebx: c033cfc0 ecx:00008000 edx: c033ec94
esi: c1398600 edi: c01f1770 ebp: 00000040 esp: c12bfe28
ds: oo6 es: 0068 ss: 0068
Stack: 00000000 00000376 00000000 00000080 0000001e c137eaa0 c137eaa0
c033efc0 c1398600 c01f1af0 c033efc0 00008000 c01f1770 c033efc0 c137eaa0
c1398600 c01f2925 c033efc0 00000040 00888898 c033efc0 00000040 c137eaa0 
00000000
Call Trace:[<c01f1af0>][<c01f1770>][<c01f2925>][<c01e926b>][<c01e947f>]
[<c01e97b3>][<c01e9670>][<c0128ef8>][c0124ac7>][<c01247e5>][c0107070>]
Warning (Oops_read): Code line not seen, dumping what data is available


>>EIP; c01f0f74 <cdrom_start_packet_command+134/200>   <=====

>>eax; c01e4210 <atapi_reset_pollfunc+0/120>
>>ebx; c033cfc0 <dkstat+1280/1400>
>>edx; c033ec94 <ide_hwifs+7d4/4e48>
>>esi; c1398600 <_end+104d3e4/104dde44>
>>edi; c01f1770 <cdrom_start_read_continuation+0/c0>
>>esp; c12bfe28 <_end+f74c0c/104dde44>

Trace; c01f1af0 <cdrom_start_read+b0/c0>
Trace; c01f1770 <cdrom_start_read_continuation+0/c0>
Trace; c01f2925 <ide_do_rw_cdrom+75/1b0>
Trace; c01e926b <start_request+fb/1c0>
Trace; c01e947f <ide_do_request+ff/220>
Trace; c01e97b3 <ide_timer_expiry+143/260>
Trace; c01e9670 <ide_timer_expiry+0/260>
Trace; c0128ef8 <__run_timers+88/172>


1 warning issued.  Results may not be reliable.

With 21.5.42 i mounted hdc and hdd many times without problem
except that one time i got this on the console but the disk was mounted


>Nov  9 14:45:52 gouv kernel: hdd: DMA interrupt recovery
>Nov  9 14:45:52 gouv kernel: hdd: lost interrupt
>Nov  9 14:45:52 gouv kernel: hdd: cdrom_decode_status:
		      status=0xd0 { Busy }
>Nov  9 14:45:52 gouv kernel: hdd: cdrom_decode_status:
                      error=0xd0LastFailedSense 0x0d 
>Nov  9 14:45:52 gouv kernel: hdd: DMA disabled
>Nov  9 14:45:52 gouv kernel: hdd: ATAPI reset complete

Here is the boot messages for 2.5.42


Linux version 2.5.42 (root@gouv) (gcc version 3.2.1 20021103 
(Debian prerelease)) #4 SMP Sat Nov 9 14:35:35 CET 2002
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
found SMP MP-table at 000f5ae0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 65536
  DMA zone: 4096 pages
  Normal zone: 61440 pages
  HighMem zone: 0 pages
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 6:6 APIC version 17
Processor #1 6:6 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Building zonelist for node : 0
Kernel command line: root=/dev/hde6
Initializing CPU#0
Detected 434.326 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 856.06 BogoMIPS
Memory: 256184k/262144k available (1455k kernel code, 5572k reserved,
295k data, 284k init, 0k highmem)
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Celeron (Mendocino) stepping 05
per-CPU timeslice cutoff: 365.86 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 868.35 BogoMIPS
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU1: Intel Celeron (Mendocino) stepping 05
Total of 2 processors activated (1724.41 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22,
 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 001 01  0    0    0   0   0    1    1    69
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    71
 0d 001 01  0    0    0   0   0    1    1    79
 0e 001 01  0    0    0   0   0    1    1    81
 0f 001 01  0    0    0   0   0    1    1    89
 10 001 01  1    1    0   1   0    1    1    91
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   1   0    1    1    99
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 434.0266 MHz.
..... host bus clock speed is 66.0810 MHz.
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
CPUS done 4294967295
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
PCI: Using configuration type 1
adding '' to cpu class interfaces
adding '' to cpu class interfaces
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I11,P0) -> 18
PCI->APIC IRQ transform: (B0,I17,P0) -> 19
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B0,I19,P1) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Starting kswapd
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
aio_setup: sizeof(struct page) = 40
Capability LSM initialized
Limiting direct PCI/PCI transfers.
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(98)
parport0: assign_addrs: aa5500ff(98)
parport0: Printer, Brother HL-1440 series
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xd0000000
block request queues:
 128 requests per read queue
 128 requests per write queue
 8 requests per batch
 enter congestion at 31
 exit congestion at 33
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xd0816000, 00:50:bf:61:ac:dc, IRQ 19
eth0:  Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST34321A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-R/RW DRIVE SW-224B, ATAPI CD/DVD-ROM drive
hdd: FX140S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller at PCI slot 00:13.0
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xc000-0xc007, BIOS settings: hdg:pio, hdh:pio
hde: IBM-DTLA-307030, ATA DISK drive
ide2 at 0xac00-0xac07,0xb002 on irq 18
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=523/255/63, UDMA(33)
 hda: hda1 hda2
hde: host protected area => 1
hde: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(44)
 hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 >
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA
register interface 'mouse' with class 'input
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 16Kbytes
TCP: Hash tables configured (established 8192 bind 10922)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 284k freed
Adding 124984k swap on /dev/hde2.  Priority:-1 extents:1
ip_conntrack version 2.1 (2048 buckets, 16384 max) - 156 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
MTRR: setting reg 1
MTRR: setting reg 1
MTRR: setting reg 1
MTRR: setting reg 1
MTRR: setting reg 1
MTRR: setting reg 1

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2002-11-09 15:10 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-03  8:05 Cdrom broken in bk current? Leopold Gouverneur
2002-11-03  9:43 ` Jens Axboe
2002-11-04 23:38   ` Leopold Gouverneur
2002-11-05  7:04     ` Jens Axboe
     [not found]       ` <20021105161720.GA4968@gouv>
     [not found]         ` <20021105174540.GA3515@suse.de>
2002-11-09 15:21           ` Kernel Bug at drivers/ide/ide-cd.c: 860! Leopold Gouverneur

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox