* [PATCH] Add printk KERN_* prefixes in 3c505.c
@ 2003-03-16 16:34 Daniele Venzano
0 siblings, 0 replies; only message in thread
From: Daniele Venzano @ 2003-03-16 16:34 UTC (permalink / raw)
To: Philip.Blundell; +Cc: Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 195 bytes --]
This patch adds KERN_* prefixes to almost all printk of 3c505.c
in the 2.5.64 kernel tree.
--
----------------------------------------
Daniele Venzano
Web: http://digilander.iol.it/webvenza/
[-- Attachment #2: 3c505_c_printk.diff --]
[-- Type: text/plain, Size: 21117 bytes --]
diff -urN -X /home/venza/kernel/dontdiff linux-2.5.64/drivers/net/3c505.c linux-2.5.64-work/drivers/net/3c505.c
--- linux-2.5.64/drivers/net/3c505.c 2003-03-14 17:35:22.000000000 +0100
+++ linux-2.5.64-work/drivers/net/3c505.c 2003-03-16 17:19:50.000000000 +0100
@@ -313,7 +313,7 @@
outb_control(orig_hcr, dev);
if (!start_receive(dev, &adapter->tx_pcb))
- printk("%s: start receive command failed \n", dev->name);
+ printk(KERN_ERR "%s: start receive command failed \n", dev->name);
}
/* Check to make sure that a DMA transfer hasn't timed out. This should
@@ -325,7 +325,7 @@
elp_device *adapter = dev->priv;
if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
unsigned long flags, f;
- printk("%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
+ printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
spin_lock_irqsave(&adapter->lock, flags);
adapter->dmaing = 0;
adapter->busy = 0;
@@ -350,7 +350,7 @@
if (inb_status(base_addr) & HCRE)
return FALSE;
}
- printk("3c505: send_pcb_slow timed out\n");
+ printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
return TRUE;
}
@@ -362,7 +362,7 @@
if (inb_status(base_addr) & HCRE)
return FALSE;
}
- printk("3c505: send_pcb_fast timed out\n");
+ printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
return TRUE;
}
@@ -415,7 +415,7 @@
/* Avoid contention */
if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
if (elp_debug >= 3) {
- printk("%s: send_pcb entered while threaded\n", dev->name);
+ printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
}
return FALSE;
}
@@ -461,7 +461,7 @@
}
if (elp_debug >= 1)
- printk("%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
+ printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
sti_abort:
spin_unlock_irqrestore(&adapter->lock, flags);
@@ -510,7 +510,7 @@
while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
if (time_after_eq(jiffies, timeout)) {
TIMEOUT_MSG(__LINE__);
- printk("%s: status %02x\n", dev->name, stat);
+ printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
return FALSE;
}
pcb->length = inb_command(dev->base_addr);
@@ -541,7 +541,7 @@
/* safety check total length vs data length */
if (total_length != (pcb->length + 2)) {
if (elp_debug >= 2)
- printk("%s: mangled PCB received\n", dev->name);
+ printk(KERN_NOTICE "%s: mangled PCB received\n", dev->name);
set_hsf(dev, HSF_PCB_NAK);
return FALSE;
}
@@ -550,7 +550,7 @@
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
set_hsf(dev, HSF_PCB_NAK);
- printk("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
+ printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
pcb->command = 0;
return TRUE;
} else {
@@ -575,7 +575,7 @@
elp_device *adapter = dev->priv;
if (elp_debug >= 3)
- printk("%s: restarting receiver\n", dev->name);
+ printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
tx_pcb->command = CMD_RECEIVE_PACKET;
tx_pcb->length = sizeof(struct Rcv_pkt);
tx_pcb->data.rcv_pkt.buf_seg
@@ -609,7 +609,7 @@
skb = dev_alloc_skb(rlen + 2);
if (!skb) {
- printk("%s: memory squeeze, dropping packet\n", dev->name);
+ printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
target = adapter->dma_buffer;
adapter->current_dma.target = NULL;
return;
@@ -626,7 +626,7 @@
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
- printk("%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
+ printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
skb->dev = dev;
adapter->current_dma.direction = 0;
@@ -646,14 +646,14 @@
release_dma_lock(flags);
if (elp_debug >= 3) {
- printk("%s: rx DMA transfer started\n", dev->name);
+ printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
}
if (adapter->rx_active)
adapter->rx_active--;
if (!adapter->busy)
- printk("%s: receive_packet called, busy not set.\n", dev->name);
+ printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
}
/******************************************************
@@ -682,10 +682,10 @@
*/
if (inb_status(dev->base_addr) & DONE) {
if (!adapter->dmaing) {
- printk("%s: phantom DMA completed\n", dev->name);
+ printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
}
if (elp_debug >= 3) {
- printk("%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
+ printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
}
outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
@@ -709,7 +709,7 @@
int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
if (elp_debug >= 2)
- printk("%s: receiving backlogged packet (%d)\n", dev->name, t);
+ printk(KERN_INFO "%s: receiving backlogged packet (%d)\n", dev->name, t);
receive_packet(dev, t);
} else {
adapter->busy = 0;
@@ -743,18 +743,18 @@
printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
} else {
if (elp_debug >= 3) {
- printk("%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
+ printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
}
if (adapter->irx_pcb.command == 0xff) {
if (elp_debug >= 2)
- printk("%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
+ printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
} else {
receive_packet(dev, dlen);
}
if (elp_debug >= 3)
- printk("%s: packet received\n", dev->name);
+ printk(KERN_DEBUG "%s: packet received\n", dev->name);
}
break;
@@ -764,7 +764,7 @@
case CMD_CONFIGURE_82586_RESPONSE:
adapter->got[CMD_CONFIGURE_82586] = 1;
if (elp_debug >= 3)
- printk("%s: interrupt - configure response received\n", dev->name);
+ printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
break;
/*
@@ -773,7 +773,7 @@
case CMD_CONFIGURE_ADAPTER_RESPONSE:
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
if (elp_debug >= 3)
- printk("%s: Adapter memory configuration %s.\n", dev->name,
+ printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -783,7 +783,7 @@
case CMD_LOAD_MULTICAST_RESPONSE:
adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
if (elp_debug >= 3)
- printk("%s: Multicast address list loading %s.\n", dev->name,
+ printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -793,7 +793,7 @@
case CMD_SET_ADDRESS_RESPONSE:
adapter->got[CMD_SET_STATION_ADDRESS] = 1;
if (elp_debug >= 3)
- printk("%s: Ethernet address setting %s.\n", dev->name,
+ printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
@@ -810,7 +810,7 @@
adapter->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
adapter->got[CMD_NETWORK_STATISTICS] = 1;
if (elp_debug >= 3)
- printk("%s: interrupt - statistics response received\n", dev->name);
+ printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
break;
/*
@@ -818,7 +818,7 @@
*/
case CMD_TRANSMIT_PACKET_COMPLETE:
if (elp_debug >= 3)
- printk("%s: interrupt - packet sent\n", dev->name);
+ printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
if (!netif_running(dev))
break;
switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
@@ -842,7 +842,7 @@
break;
}
} else {
- printk("%s: failed to read PCB on interrupt\n", dev->name);
+ printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
adapter_reset(dev);
}
}
@@ -872,13 +872,13 @@
adapter = dev->priv;
if (elp_debug >= 3)
- printk("%s: request to open device\n", dev->name);
+ printk(KERN_DEBUG "%s: request to open device\n", dev->name);
/*
* make sure we actually found the device
*/
if (adapter == NULL) {
- printk("%s: Opening a non-existent physical device\n", dev->name);
+ printk(KERN_WARNING "%s: Opening a non-existent physical device\n", dev->name);
return -EAGAIN;
}
/*
@@ -945,7 +945,7 @@
adapter->tx_pcb.length = sizeof(struct Memconf);
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk("%s: couldn't send memory configuration command\n", dev->name);
+ printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
else {
int timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
@@ -958,13 +958,13 @@
* configure adapter to receive broadcast messages and wait for response
*/
if (elp_debug >= 3)
- printk("%s: sending 82586 configure command\n", dev->name);
+ printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk("%s: couldn't send 82586 configure command\n", dev->name);
+ printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
else {
int timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
@@ -980,7 +980,7 @@
*/
prime_rx(dev);
if (elp_debug >= 3)
- printk("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
+ printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
/*
* device is now officially open!
@@ -1010,7 +1010,7 @@
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (elp_debug >= 2)
- printk("%s: transmit blocked\n", dev->name);
+ printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
return FALSE;
}
@@ -1032,7 +1032,7 @@
}
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
- printk("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
+ printk(KERN_ERR "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
adapter->current_dma.direction = 1;
adapter->current_dma.start_time = jiffies;
@@ -1058,7 +1058,7 @@
release_dma_lock(flags);
if (elp_debug >= 3)
- printk("%s: DMA transfer started\n", dev->name);
+ printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
return TRUE;
}
@@ -1075,7 +1075,7 @@
stat = inb_status(dev->base_addr);
printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
if (elp_debug >= 1)
- printk("%s: status %#02x\n", dev->name, stat);
+ printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
dev->trans_start = jiffies;
adapter->stats.tx_dropped++;
netif_wake_queue(dev);
@@ -1097,7 +1097,7 @@
check_3c505_dma(dev);
if (elp_debug >= 3)
- printk("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
+ printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
netif_stop_queue(dev);
@@ -1106,13 +1106,13 @@
*/
if (!send_packet(dev, skb)) {
if (elp_debug >= 2) {
- printk("%s: failed to transmit packet\n", dev->name);
+ printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
}
spin_unlock_irqrestore(&adapter->lock, flags);
return 1;
}
if (elp_debug >= 3)
- printk("%s: packet of length %d sent\n", dev->name, (int) skb->len);
+ printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
/*
* start the transmit timeout
@@ -1136,7 +1136,7 @@
elp_device *adapter = (elp_device *) dev->priv;
if (elp_debug >= 3)
- printk("%s: request for stats\n", dev->name);
+ printk(KERN_DEBUG "%s: request for stats\n", dev->name);
/* If the device is closed, just return the latest stats we have,
- we cannot ask from the adapter without interrupts */
@@ -1148,7 +1148,7 @@
adapter->tx_pcb.length = 0;
adapter->got[CMD_NETWORK_STATISTICS] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk("%s: couldn't send get statistics command\n", dev->name);
+ printk(KERN_DEBUG "%s: couldn't send get statistics command\n", dev->name);
else {
int timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
@@ -1256,7 +1256,7 @@
adapter = dev->priv;
if (elp_debug >= 3)
- printk("%s: request to close device\n", dev->name);
+ printk(KERN_DEBUG "%s: request to close device\n", dev->name);
netif_stop_queue(dev);
@@ -1300,7 +1300,7 @@
unsigned long flags;
if (elp_debug >= 3)
- printk("%s: request to set multicast list\n", dev->name);
+ printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
spin_lock_irqsave(&adapter->lock, flags);
@@ -1315,7 +1315,7 @@
}
adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
- printk("%s: couldn't send set_multicast command\n", dev->name);
+ printk(KERN_WARNING "%s: couldn't send set_multicast command\n", dev->name);
else {
int timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
@@ -1334,14 +1334,14 @@
* and wait for response
*/
if (elp_debug >= 3)
- printk("%s: sending 82586 configure command\n", dev->name);
+ printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
{
spin_unlock_irqrestore(&adapter->lock, flags);
- printk("%s: couldn't send 82586 configure command\n", dev->name);
+ printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
}
else {
int timeout = jiffies + TIMEOUT;
@@ -1408,11 +1408,11 @@
orig_HSR = inb_status(addr);
if (elp_debug > 0)
- printk(search_msg, name, addr);
+ printk(KERN_DEBUG search_msg, name, addr);
if (orig_HSR == 0xff) {
if (elp_debug > 0)
- printk(notfound_msg, 1);
+ printk(KERN_DEBUG notfound_msg, 1);
goto out;
}
/* Enable interrupts - we need timers! */
@@ -1421,7 +1421,7 @@
/* Wait for a while; the adapter may still be booting up */
if (elp_debug > 0)
- printk(stilllooking_msg);
+ printk(KERN_INFO stilllooking_msg);
if (orig_HSR & DIR) {
/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
@@ -1431,7 +1431,7 @@
restore_flags(flags);
if (inb_status(addr) & DIR) {
if (elp_debug > 0)
- printk(notfound_msg, 2);
+ printk(KERN_INFO notfound_msg, 2);
goto out;
}
} else {
@@ -1442,7 +1442,7 @@
restore_flags(flags);
if (!(inb_status(addr) & DIR)) {
if (elp_debug > 0)
- printk(notfound_msg, 3);
+ printk(KERN_INFO notfound_msg, 3);
goto out;
}
}
@@ -1450,7 +1450,7 @@
* It certainly looks like a 3c505.
*/
if (elp_debug > 0)
- printk(found_msg);
+ printk(KERN_INFO found_msg);
return 0;
out:
@@ -1481,7 +1481,7 @@
/* could not find an adapter */
if (elp_debug > 0)
- printk(couldnot_msg, dev->name);
+ printk(KERN_INFO couldnot_msg, dev->name);
return 0; /* Because of this, the layer above will return -ENODEV */
}
@@ -1529,7 +1529,7 @@
*/
adapter = (elp_device *) (dev->priv = kmalloc(sizeof(elp_device), GFP_KERNEL));
if (adapter == NULL) {
- printk("%s: out of memory\n", dev->name);
+ printk(KERN_ERR "%s: out of memory\n", dev->name);
return -ENODEV;
}
@@ -1554,7 +1554,7 @@
/* Nope, it's ignoring the command register. This means that
* either it's still booting up, or it's died.
*/
- printk("%s: command register wouldn't drain, ", dev->name);
+ printk(KERN_WARNING "%s: command register wouldn't drain, ", dev->name);
if ((inb_status(dev->base_addr) & 7) == 3) {
/* If the adapter status is 3, it *could* still be booting.
* Give it the benefit of the doubt for 10 seconds.
@@ -1563,7 +1563,7 @@
timeout = jiffies + 10*HZ;
while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
if (inb_status(dev->base_addr) & 7) {
- printk("%s: 3c505 failed to start\n", dev->name);
+ printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
} else {
okay = 1; /* It started */
}
@@ -1584,18 +1584,18 @@
adapter->tx_pcb.length = 0;
cookie = probe_irq_on();
if (!send_pcb(dev, &adapter->tx_pcb)) {
- printk("%s: could not send first PCB\n", dev->name);
+ printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if (!receive_pcb(dev, &adapter->rx_pcb)) {
- printk("%s: could not read first PCB\n", dev->name);
+ printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
(adapter->rx_pcb.length != 6)) {
- printk("%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
+ printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
probe_irq_off(cookie);
continue;
}
@@ -1608,29 +1608,29 @@
outb_control(adapter->hcr_val | FLSH | ATTN, dev);
outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
}
- printk("%s: failed to initialise 3c505\n", dev->name);
+ printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
release_region(dev->base_addr, ELP_IO_EXTENT);
return -ENODEV;
- okay:
+okay:
if (dev->irq) { /* Is there a preset IRQ? */
int rpt = probe_irq_off(cookie);
if (dev->irq != rpt) {
- printk("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
+ printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
}
/* if dev->irq == probe_irq_off(cookie), all is well */
} else /* No preset IRQ; just use what we can detect */
dev->irq = probe_irq_off(cookie);
switch (dev->irq) { /* Legal, sane? */
case 0:
- printk("%s: IRQ probe failed: check 3c505 jumpers.\n",
+ printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
dev->name);
return -ENODEV;
case 1:
case 6:
case 8:
case 13:
- printk("%s: Impossible IRQ %d reported by probe_irq_off().\n",
+ printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
dev->name, dev->irq);
return -ENODEV;
}
@@ -1660,7 +1660,7 @@
/*
* print remainder of startup message
*/
- printk("%s: 3c505 at %#lx, irq %d, dma %d, ",
+ printk("KERN_INFO %s: 3c505 at %#lx, irq %d, dma %d, ",
dev->name, dev->base_addr, dev->irq, dev->dma);
printk("addr %02x:%02x:%02x:%02x:%02x:%02x, ",
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
@@ -1676,7 +1676,7 @@
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
(adapter->rx_pcb.length != 10)) {
- printk("not responding to second PCB\n");
+ printk(KERN_WARNING "not responding to second PCB\n");
}
printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
@@ -1695,10 +1695,10 @@
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
(adapter->rx_pcb.length != 2)) {
- printk("%s: could not configure adapter memory\n", dev->name);
+ printk(KERN_WARNING "%s: could not configure adapter memory\n", dev->name);
}
if (adapter->rx_pcb.data.configure) {
- printk("%s: adapter configuration failed\n", dev->name);
+ printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
}
/*
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-03-16 16:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-16 16:34 [PATCH] Add printk KERN_* prefixes in 3c505.c Daniele Venzano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox