Re: 2.5 on a hp omnibook 6000

Re: 2.5 on a hp omnibook 6000

[Paolo Ciarrocchi]

andreashappe@gmx .net
>> I have a laptop, it is a HP omnibook 6000.
>mine is a hp omnibook 6100.
Ok. I think you have a bigger monitor and 
more cpu Hz.

>> http://bugzilla.kernel.org/show_bug.cgi?id=149
>that could be related to bug #18.
I don't know.
Do you have the same problem with your 6100 ?

>> http://bugzilla.kernel.org/show_bug.cgi?id=395
>works for me with compiled in maestro3 driver, could it rather be a
>distribution related problem?
Yes it could be.
But when I boot the machine I see strange lines:

Advanced Linux Sound Architecture Driver Version 0.9.0rc7 (Sat Feb 15 15:01:21 
2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
no UART detected at 0xffff
Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378


> may I add some other bug reports for my laptop (hp omnibook 6100):
>computer doesn't boot with enabled acpi:
>http://bugzilla.kernel.org/show_bug.cgi?id=293
The same here, but I didn't tried with 2.5.66.

>and:
>computer doesn't shutdown with enabled apic (I thing I've heard that the
>same behaviour is shown on hp omnibook 6000).

Dunno, but I can try tomorrow.

Andreas thanks for the info,
if you want to reply please cc me, I'm not subscribed to 
the list.

Ciao,
        Paolo

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

Re: 2.5 on a hp omnibook 6000

[Andreas Happe]

In article <20030331142558.1358.qmail@linuxmail.org>, Paolo Ciarrocchi wrote:
> andreashappe@gmx .net
>>> I have a laptop, it is a HP omnibook 6000.
>>mine is a hp omnibook 6100.
> Ok. I think you have a bigger monitor and 
> more cpu Hz.

monitor should be the same, graphic card is different (radeon mob. compared
to your ati rage mob.) and I should have a newer chipset.

>>> http://bugzilla.kernel.org/show_bug.cgi?id=149
>>that could be related to bug #18.
> I don't know.
> Do you have the same problem with your 6100 ?

yes, but IMO that is a driver/hardware feature and bug #18 is about
missing synaptics features/options in the actual driver. I've glanced
through the posted spec, but havn't found any helping information (OTH
I'm not a skilled driver programmer).

andreas
-- 
The truly paranoid administrator may wish to place
motion detectors in the air ducts.
  -- Practical UNIX & Internet Security, 2nd Edition

2.5 on a hp omnibook 6000

[Paolo Ciarrocchi]

Hi all,
I have been playing with 2.5 kernel since 2.5.3[0123] has been released.
I have a laptop, it is a HP omnibook 6000.

So far, I have reported the following bugs that are still open:
http://bugzilla.kernel.org/show_bug.cgi?id=149
http://bugzilla.kernel.org/show_bug.cgi?id=395
^^^^ This one is really nasty, no sound no mp3, no oggs, no tests
about interactivity.

I still have to fill another bug in bugzilla,
I described it here: 
http://marc.theaimsgroup.com/?t=104854641000005&r=1&w=2&n=1

Is anyone using the same hardware ?

I can test patches, if needed.

Regards and ciao,
                Paolo


-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze

Re: 2.5 on a hp omnibook 6000

[Andreas Happe]

In article <20030331090646.1152.qmail@linuxmail.org>, Paolo Ciarrocchi wrote:
> I have a laptop, it is a HP omnibook 6000.

mine is a hp omnibook 6100.

> http://bugzilla.kernel.org/show_bug.cgi?id=149

that could be related to bug #18.

> http://bugzilla.kernel.org/show_bug.cgi?id=395

works for me with compiled in maestro3 driver, could it rather be a
distribution related problem?

may I add some other bug reports for my laptop (hp omnibook 6100):

computer doesn't boot with enabled acpi:
http://bugzilla.kernel.org/show_bug.cgi?id=293

and:
computer doesn't shutdown with enabled apic (I thing I've heard that the
same behaviour is shown on hp omnibook 6000).

andreas