* Can't eject jaz disk on 2.6
@ 2004-03-27 12:59 Wakko Warner
2004-03-27 22:42 ` Matthew Dharm
0 siblings, 1 reply; 4+ messages in thread
From: Wakko Warner @ 2004-03-27 12:59 UTC (permalink / raw)
To: linux-kernel
I've used 2.6.0 to 2.6.4 on a computer with a jaz drive.
Using eject 2.0.13, I'm unable to eject the disk. I have tested on 2.4.24
and it does eject.
--
Lab tests show that use of micro$oft causes cancer in lab animals
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't eject jaz disk on 2.6
2004-03-27 12:59 Can't eject jaz disk on 2.6 Wakko Warner
@ 2004-03-27 22:42 ` Matthew Dharm
2004-03-27 23:00 ` Wakko Warner
0 siblings, 1 reply; 4+ messages in thread
From: Matthew Dharm @ 2004-03-27 22:42 UTC (permalink / raw)
To: Wakko Warner; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 821 bytes --]
On Sat, Mar 27, 2004 at 07:59:18AM -0500, Wakko Warner wrote:
> I've used 2.6.0 to 2.6.4 on a computer with a jaz drive.
> Using eject 2.0.13, I'm unable to eject the disk. I have tested on 2.4.24
> and it does eject.
Over on the usb-storage list, we've just become aware of a similar problem.
Are you using SCSI or IDE?
We've actually recorded the SCSI layer sending us a PREVENT_MEDIUM_REMOVAL,
then a START_STOP (to actually eject), and then an ALLOW_MEDIUM_REMOVAL.
So, nothing gets ejected. This is under 2.6.
Matt
--
Matthew Dharm Home: mdharm-usb@one-eyed-alien.net
Maintainer, Linux USB Mass Storage Driver
S: Another stupid question?
G: There's no such thing as a stupid question, only stupid people.
-- Stef and Greg
User Friendly, 7/15/1998
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't eject jaz disk on 2.6
2004-03-27 23:00 ` Wakko Warner
@ 2004-03-27 22:52 ` Matthew Dharm
0 siblings, 0 replies; 4+ messages in thread
From: Matthew Dharm @ 2004-03-27 22:52 UTC (permalink / raw)
To: Wakko Warner; +Cc: linux-kernel, Linux SCSI list, USB Storage List
[-- Attachment #1: Type: text/plain, Size: 1589 bytes --]
On Sat, Mar 27, 2004 at 06:00:18PM -0500, Wakko Warner wrote:
> > > I've used 2.6.0 to 2.6.4 on a computer with a jaz drive.
> > > Using eject 2.0.13, I'm unable to eject the disk. I have tested on 2.4.24
> > > and it does eject.
> >
> > Over on the usb-storage list, we've just become aware of a similar problem.
>
> What was it with?
The device in question there was an Iomega USB Zip 100 drive.
> > Are you using SCSI or IDE?
>
> SCSI. I thought all JAZ disks were scsi?
I wasn't sure. USB is emulated through the SCSI layer, tho. I would
recommend we take this discussion to the linux-scsi mailing list.
> > We've actually recorded the SCSI layer sending us a PREVENT_MEDIUM_REMOVAL,
> > then a START_STOP (to actually eject), and then an ALLOW_MEDIUM_REMOVAL.
> > So, nothing gets ejected. This is under 2.6.
>
> I have noticed that when I attempt to eject, it spins the disk backup,
> spins down and that's it.
The user of the Zip 100 actually sent us logs showing this behavior. We
assume it's coming from the SCSI system, as usb-storage doesn't contain
anything remotely resembling this....
Repeated uses of the 'eject' command generated the same sequence in his
test scenario, but his Zip 100 actually ejected the media on the second
try. I think that's a device-dependent behavior, tho.
Matt
--
Matthew Dharm Home: mdharm-usb@one-eyed-alien.net
Maintainer, Linux USB Mass Storage Driver
I say, what are all those naked people doing?
-- Big client to Stef
User Friendly, 12/14/1997
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't eject jaz disk on 2.6
2004-03-27 22:42 ` Matthew Dharm
@ 2004-03-27 23:00 ` Wakko Warner
2004-03-27 22:52 ` Matthew Dharm
0 siblings, 1 reply; 4+ messages in thread
From: Wakko Warner @ 2004-03-27 23:00 UTC (permalink / raw)
To: Matthew Dharm; +Cc: linux-kernel
> > I've used 2.6.0 to 2.6.4 on a computer with a jaz drive.
> > Using eject 2.0.13, I'm unable to eject the disk. I have tested on 2.4.24
> > and it does eject.
>
> Over on the usb-storage list, we've just become aware of a similar problem.
What was it with?
> Are you using SCSI or IDE?
SCSI. I thought all JAZ disks were scsi?
> We've actually recorded the SCSI layer sending us a PREVENT_MEDIUM_REMOVAL,
> then a START_STOP (to actually eject), and then an ALLOW_MEDIUM_REMOVAL.
> So, nothing gets ejected. This is under 2.6.
I have noticed that when I attempt to eject, it spins the disk backup,
spins down and that's it.
--
Lab tests show that use of micro$oft causes cancer in lab animals
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-03-27 22:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-27 12:59 Can't eject jaz disk on 2.6 Wakko Warner
2004-03-27 22:42 ` Matthew Dharm
2004-03-27 23:00 ` Wakko Warner
2004-03-27 22:52 ` Matthew Dharm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox