From: Tom Rini <trini@kernel.crashing.org>
To: Kumar Gala <kumar.gala@freescale.com>
Cc: akpm@osdl.org, Christoph Hellwig <hch@infradead.org>,
Pantelis Antoniou <panto@intracom.gr>,
Ingo Molnar <mingo@elte.hu>,
Linuxppc-Embedded <linuxppc-embedded@lists.linuxppc.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>,
"Gala Kumar K.-galak" <kumar.gala@motorola.com>,
David Woodhouse <dwmw2@infradead.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [PATCH] Fix early request_irq
Date: Mon, 1 Nov 2004 12:59:11 -0700 [thread overview]
Message-ID: <20041101195911.GL24459@smtp.west.cox.net> (raw)
In-Reply-To: <Pine.GSO.4.44.0411011140100.17740-100000@sysperf.somerset.sps.mot.com>
On Mon, Nov 01, 2004 at 11:41:44AM -0600, Kumar Gala wrote:
> Andrew,
>
> Please apply this patch from Tom Rini. I've tested it for PowerPC MPC85xx
> parts and it works.
>
> Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
I've attached a slightly different version, which applies against
current -bk (Linus applied a patch from Ben that fixed pmac booting
which made my patch not apply), which is the only change.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
--- 1.37/arch/ppc/platforms/chrp_setup.c 2004-10-29 01:13:38 -07:00
+++ edited/arch/ppc/platforms/chrp_setup.c 2004-11-01 12:56:45 -07:00
@@ -371,19 +371,14 @@
}
}
-static int __init
-chrp_request_cascade(void)
-{
- if (_machine != _MACH_chrp)
- return 0;
-
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- return 0;
-}
-arch_initcall(chrp_request_cascade);
-
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+static struct irqaction xmon_irqaction = {
+ .handler = xmon_irq,
+ .mask = CPU_MASK_NONE,
+ .name = "XMON break",
+};
+#endif
+
void __init chrp_init_IRQ(void)
{
struct device_node *np;
@@ -413,6 +408,9 @@
OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
openpic_init(NUM_8259_INTERRUPTS);
+ /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ i8259_irq);
for (i = 0; i < NUM_8259_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
@@ -426,7 +424,7 @@
&& strcmp(kbd->parent->type, "adb") == 0)
break;
if (kbd)
- request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break", 0);
+ setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
#endif
}
--- 1.27/arch/ppc/platforms/lopec.c 2004-10-27 15:05:16 -07:00
+++ edited/arch/ppc/platforms/lopec.c 2004-11-01 12:55:54 -07:00
@@ -258,17 +258,6 @@
}
#endif /* BLK_DEV_IDE */
-static int __init
-lopec_request_cascade(void)
-{
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- &i8259_irq);
-
- return 0;
-}
-arch_initcall(lopec_request_cascade);
-
static void __init
lopec_init_IRQ(void)
{
@@ -281,6 +270,10 @@
OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
mpc10x_set_openpic();
+
+ /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ &i8259_irq);
/* Map i8259 interrupts */
for(i = 0; i < NUM_8259_INTERRUPTS; i++)
--- 1.19/arch/ppc/platforms/mcpn765.c 2004-10-27 15:05:16 -07:00
+++ edited/arch/ppc/platforms/mcpn765.c 2004-11-01 12:55:54 -07:00
@@ -363,15 +363,6 @@
return;
}
-static int __init
-mcpn765_request_cascade(void)
-{
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- return 0;
-}
-arch_initcall(mcpn765_request_cascade);
-
/*
* Interrupt setup and service.
* Have MPIC on HAWK and cascaded 8259s on VIA 82586 cascaded to MPIC.
@@ -385,6 +376,8 @@
ppc_md.progress("init_irq: enter", 0);
openpic_init(NUM_8259_INTERRUPTS);
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ i8259_irq);
for(i=0; i < NUM_8259_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
--- 1.11/arch/ppc/platforms/mvme5100.c 2004-10-27 15:05:16 -07:00
+++ edited/arch/ppc/platforms/mvme5100.c 2004-11-01 12:55:54 -07:00
@@ -204,17 +204,6 @@
return;
}
-static int __init
-mvme5100_request_cascade(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- &i8259_irq);
-#endif
- return 0;
-}
-arch_initcall(mvme5100_request_cascade);
-
/*
* Interrupt setup and service.
* Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
@@ -232,12 +221,14 @@
openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
#ifdef CONFIG_MVME5100_IPMC761_PRESENT
openpic_init(NUM_8259_INTERRUPTS);
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ &i8259_irq);
/* Map i8259 interrupts. */
for (i = 0; i < NUM_8259_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
- i8259_init((long)NULL);
+ i8259_init(0);
#else
openpic_init(0);
#endif
--- 1.20/arch/ppc/platforms/pmac_smp.c 2004-09-07 23:32:57 -07:00
+++ edited/arch/ppc/platforms/pmac_smp.c 2004-11-01 12:55:54 -07:00
@@ -405,6 +405,13 @@
smp_tb_synchronized = 1;
}
+static struct irqaction psurge_irqaction = {
+ .handler = psurge_primary_intr,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "primary IPI",
+};
+
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
@@ -421,7 +428,7 @@
/* reset the entry point so if we get another intr we won't
* try to startup again */
out_be32(psurge_start, 0x100);
- if (request_irq(30, psurge_primary_intr, SA_INTERRUPT, "primary IPI", NULL))
+ if (setup_irq(30, &psurge_irqaction))
printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
--- 1.23/arch/ppc/platforms/pplus.c 2004-10-27 15:05:16 -07:00
+++ edited/arch/ppc/platforms/pplus.c 2004-11-01 12:55:54 -07:00
@@ -654,16 +654,6 @@
return irq;
}
-static int __init
-pplus_request_cascade(void)
-{
- if (OpenPIC_Addr != NULL)
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- return 0;
-}
-arch_initcall(pplus_request_cascade);
-
static void __init pplus_init_IRQ(void)
{
int i;
@@ -678,6 +668,8 @@
openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
openpic_init(NUM_8259_INTERRUPTS);
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ i8259_irq);
ppc_md.get_irq = openpic_get_irq;
}
--- 1.59/arch/ppc/platforms/prep_setup.c 2004-10-29 01:13:38 -07:00
+++ edited/arch/ppc/platforms/prep_setup.c 2004-11-01 12:56:21 -07:00
@@ -958,20 +958,6 @@
}
}
-static int __init
-prep_request_cascade(void)
-{
- if (_machine != _MACH_prep)
- return 0;
-
- if (OpenPIC_Addr != NULL)
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- return 0;
-}
-arch_initcall(prep_request_cascade);
-
static void __init
prep_init_IRQ(void)
{
@@ -980,6 +966,9 @@
if (OpenPIC_Addr != NULL) {
openpic_init(NUM_8259_INTERRUPTS);
+ /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ i8259_irq);
}
for ( i = 0 ; i < NUM_8259_INTERRUPTS ; i++ )
irq_desc[i].handler = &i8259_pic;
--- 1.21/arch/ppc/platforms/sandpoint.c 2004-10-27 15:55:36 -07:00
+++ edited/arch/ppc/platforms/sandpoint.c 2004-11-01 12:56:00 -07:00
@@ -383,15 +383,6 @@
arch_initcall(sandpoint_request_io);
-static int __init
-sandpoint_request_cascade(void)
-{
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- return 0;
-}
-arch_initcall(sandpoint_request_cascade);
-
/*
* Interrupt setup and service. Interrrupts on the Sandpoint come
* from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
@@ -407,6 +398,8 @@
OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
mpc10x_set_openpic();
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ i8259_irq);
/*
* openpic_init() has set up irq_desc[16-31] to be openpic
--- 1.9/arch/ppc/platforms/sbc82xx.c 2004-10-18 22:26:40 -07:00
+++ edited/arch/ppc/platforms/sbc82xx.c 2004-11-01 12:56:00 -07:00
@@ -146,6 +146,13 @@
return IRQ_HANDLED;
}
+static struct irqaction sbc82xx_i8259_irqaction = {
+ .handler = sbc82xx_i8259_demux,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "i8259 demux",
+};
+
void __init sbc82xx_init_IRQ(void)
{
volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
@@ -186,8 +193,7 @@
sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
/* Request cascade IRQ */
- if (request_irq(SIU_INT_IRQ6, sbc82xx_i8259_demux, SA_INTERRUPT,
- "i8259 demux", 0)) {
+ if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
printk("Installation of i8259 IRQ demultiplexer failed.\n");
}
}
--- 1.2/arch/ppc/platforms/85xx/mpc8560_ads.c 2004-10-18 22:26:40 -07:00
+++ edited/arch/ppc/platforms/85xx/mpc8560_ads.c 2004-11-01 12:56:00 -07:00
@@ -150,6 +150,13 @@
return IRQ_HANDLED;
}
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+
static void __init
mpc8560_ads_init_IRQ(void)
{
@@ -173,7 +180,7 @@
immap->im_intctl.ic_scprrh = 0x05309770;
immap->im_intctl.ic_scprrl = 0x05309770;
- request_irq(MPC85xx_IRQ_CPM, cpm2_cascade, SA_INTERRUPT, "cpm2_cascade", NULL);
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
return;
}
--- 1.4/arch/ppc/platforms/85xx/mpc85xx_cds_common.c 2004-10-18 22:26:40 -07:00
+++ edited/arch/ppc/platforms/85xx/mpc85xx_cds_common.c 2004-11-01 12:56:00 -07:00
@@ -193,6 +193,13 @@
while((irq = cpm2_get_irq(regs)) >= 0)
__do_IRQ(irq, regs);
}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
#endif /* CONFIG_CPM2 */
void __init
@@ -235,7 +242,7 @@
immap->im_intctl.ic_scprrh = 0x05309770;
immap->im_intctl.ic_scprrl = 0x05309770;
- request_irq(MPC85xx_IRQ_CPM, cpm2_cascade, SA_INTERRUPT, "cpm2_cascade", NULL);
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
#endif
return;
--- 1.15/arch/ppc/syslib/i8259.c 2004-10-29 01:13:38 -07:00
+++ edited/arch/ppc/syslib/i8259.c 2004-11-01 12:57:36 -07:00
@@ -13,7 +13,6 @@
static spinlock_t i8259_lock = SPIN_LOCK_UNLOCKED;
int i8259_pic_irq_offset;
-static int i8259_present;
/*
* Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -152,20 +151,13 @@
"8259 edge control", 0x4d0, 0x4d1, IORESOURCE_BUSY
};
-static int __init
-i8259_hook_cascade(void)
-{
- if (!i8259_present)
- return 0;
-
- /* reserve our resources */
- request_irq( i8259_pic_irq_offset + 2, no_action, SA_INTERRUPT,
- "82c59 secondary cascade", NULL );
- return 0;
-}
-
-arch_initcall(i8259_hook_cascade);
-
+static struct irqaction i8259_irqaction = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "82c59 secondary cascade",
+};
+
/*
* i8259_init()
* intack_addr - PCI interrupt acknowledge (real) address which will return
@@ -199,12 +191,12 @@
spin_unlock_irqrestore(&i8259_lock, flags);
+ /* reserve our resources */
+ setup_irq( i8259_pic_irq_offset + 2, &i8259_irqaction);
request_resource(&ioport_resource, &pic1_iores);
request_resource(&ioport_resource, &pic2_iores);
request_resource(&ioport_resource, &pic_edgectrl_iores);
if (intack_addr != 0)
pci_intack = ioremap(intack_addr, 1);
-
- i8259_present = 1;
}
--- 1.39/arch/ppc/syslib/open_pic.c 2004-09-22 13:28:16 -07:00
+++ edited/arch/ppc/syslib/open_pic.c 2004-11-01 12:56:00 -07:00
@@ -681,13 +681,21 @@
/*
* Hookup a cascade to the OpenPIC.
*/
+
+static struct irqaction openpic_cascade_irqaction = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+};
+
void __init
openpic_hookup_cascade(u_int irq, char *name,
int (*cascade_fn)(struct pt_regs *))
{
openpic_cascade_irq = irq;
openpic_cascade_fn = cascade_fn;
- if (request_irq(irq, no_action, SA_INTERRUPT, name, NULL))
+
+ if (setup_irq(irq, &openpic_cascade_irqaction))
printk("Unable to get OpenPIC IRQ %d for cascade\n",
irq - open_pic_irq_offset);
}
--
Tom Rini
http://gate.crashing.org/~trini/
next prev parent reply other threads:[~2004-11-01 22:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-29 14:05 [PATCH] Fix early request_irq Pantelis Antoniou
2004-10-29 14:16 ` Ingo Molnar
2004-10-29 14:20 ` Pantelis Antoniou
2004-10-29 14:21 ` Christoph Hellwig
2004-10-29 16:11 ` Tom Rini
2004-11-01 17:41 ` Kumar Gala
2004-11-01 19:59 ` Tom Rini [this message]
2004-11-02 7:51 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041101195911.GL24459@smtp.west.cox.net \
--to=trini@kernel.crashing.org \
--cc=akpm@osdl.org \
--cc=benh@kernel.crashing.org \
--cc=dwmw2@infradead.org \
--cc=hch@infradead.org \
--cc=kumar.gala@freescale.com \
--cc=kumar.gala@motorola.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=mingo@elte.hu \
--cc=panto@intracom.gr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox