From: Jesse Barnes <jbarnes@engr.sgi.com>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] fix ROM enable/disable in r128 and radeon fb drivers
Date: Tue, 14 Dec 2004 12:56:20 -0800 [thread overview]
Message-ID: <200412141256.21143.jbarnes@engr.sgi.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 435 bytes --]
My mail to the maintainer bounced, but these should be safe for everybody.
Both the r128 and radeon fb drivers do bad things with the PCI BAR
corresponding to their option ROM. They incorrectly use the host address
instead of the BAR address to enable the ROM, and then incorrectly lose the
original value on unmap. This patch fixes both problems. Tested on Altix.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Thanks,
Jesse
[-- Attachment #2: aty-rom-enable-fixes.patch --]
[-- Type: text/plain, Size: 2230 bytes --]
===== drivers/video/aty/aty128fb.c 1.52 vs edited =====
--- 1.52/drivers/video/aty/aty128fb.c 2004-11-12 11:40:39 -08:00
+++ edited/drivers/video/aty/aty128fb.c 2004-12-13 15:13:55 -08:00
@@ -791,6 +791,7 @@
static void __init aty128_unmap_ROM(struct pci_dev *dev, void __iomem * rom)
{
struct resource *r = &dev->resource[PCI_ROM_RESOURCE];
+ u32 val;
iounmap(rom);
@@ -801,8 +802,9 @@
r->end -= r->start;
r->start = 0;
}
- /* This will disable and set address to unassigned */
- pci_write_config_dword(dev, dev->rom_base_reg, 0);
+ /* This will disable it again */
+ pci_read_config_dword(dev, dev->rom_base_reg, &val);
+ pci_write_config_dword(dev, dev->rom_base_reg, val & ~PCI_ROM_ADDRESS_ENABLE);
}
@@ -830,8 +832,10 @@
/* enable if needed */
if (!(r->flags & PCI_ROM_ADDRESS_ENABLE)) {
+ u32 val;
+ pci_read_config_dword(dev, dev->rom_base_reg, &val);
pci_write_config_dword(dev, dev->rom_base_reg,
- r->start | PCI_ROM_ADDRESS_ENABLE);
+ val | PCI_ROM_ADDRESS_ENABLE);
r->flags |= PCI_ROM_ADDRESS_ENABLE;
}
===== drivers/video/aty/radeon_base.c 1.35 vs edited =====
--- 1.35/drivers/video/aty/radeon_base.c 2004-11-11 00:39:04 -08:00
+++ edited/drivers/video/aty/radeon_base.c 2004-12-13 15:11:56 -08:00
@@ -265,6 +265,7 @@
{
// leave it disabled and unassigned
struct resource *r = &dev->resource[PCI_ROM_RESOURCE];
+ u32 val;
if (!rinfo->bios_seg)
return;
@@ -277,8 +278,9 @@
r->end -= r->start;
r->start = 0;
}
- /* This will disable and set address to unassigned */
- pci_write_config_dword(dev, dev->rom_base_reg, 0);
+ /* This will disable it again */
+ pci_read_config_dword(dev, dev->rom_base_reg, &val);
+ pci_write_config_dword(dev, dev->rom_base_reg, val & ~PCI_ROM_ADDRESS_ENABLE);
}
static int __devinit radeon_map_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev)
@@ -310,8 +312,10 @@
/* enable if needed */
if (!(r->flags & PCI_ROM_ADDRESS_ENABLE)) {
+ u32 val;
+ pci_read_config_dword(dev, dev->rom_base_reg, &val);
pci_write_config_dword(dev, dev->rom_base_reg,
- r->start | PCI_ROM_ADDRESS_ENABLE);
+ val | PCI_ROM_ADDRESS_ENABLE);
r->flags |= PCI_ROM_ADDRESS_ENABLE;
}
next reply other threads:[~2004-12-14 20:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-14 20:56 Jesse Barnes [this message]
2004-12-14 21:45 ` [PATCH] fix ROM enable/disable in r128 and radeon fb drivers Jon Smirl
2004-12-14 22:20 ` Jesse Barnes
2004-12-23 18:15 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200412141256.21143.jbarnes@engr.sgi.com \
--to=jbarnes@engr.sgi.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox