2.6.14-mm1 libata pata

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* 2.6.14-mm1 libata pata_via
@ 2005-11-07 17:32 Chris Boot
  2005-11-08  3:15 ` Alan Cox
  2005-11-08 12:13 ` Sander
  0 siblings, 2 replies; 12+ messages in thread
From: Chris Boot @ 2005-11-07 17:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: Alan Cox

[-- Attachment #1: Type: text/plain, Size: 4397 bytes --]

Hi all,

Since I've only got a DVD drive on good ol' PATA, I thought I'd try  
Alan's latest VIA PATA driver for libata, to see where I got. Well,  
the machine simply doesn't boot, preferring to get stuck after  
detecting the drive. I've tried with and without  
libata.atapi_enabled=1 and get the same result in both cases. Here's  
my log with some SysRq output that might be useful:

[4294671.089000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ  
11, using IRQ 20
[4294671.125000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294671.159000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] - 
 > GSI 20 (level, low) -> IRQ 177
[4294671.196000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
[4294671.230000] sata_via 0000:00:0f.0: routed to hard irq line 1
[4294671.264000] ata3: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma  
0xC800 irq 177
[4294671.300000] ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma  
0xC808 irq 177
[4294671.687000] ata3: dev 0 ATA-7, max UDMA/133, 488397168 sectors:  
LBA48
[4294671.722000] ata3: dev 0 configured for UDMA/133
[4294671.754000] scsi2 : sata_via
[4294672.136000] ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors:  
LBA48
[4294672.172000] ata4: dev 0 configured for UDMA/133
[4294672.203000] scsi3 : sata_via
[4294672.232000]   Vendor: ATA       Model: ST3250823AS       Rev: 3.03
[4294672.267000]   Type:   Direct-Access                      ANSI  
SCSI revision: 05
[4294672.302000]   Vendor: ATA       Model: ST3250823AS       Rev: 3.03
[4294672.338000]   Type:   Direct-Access                      ANSI  
SCSI revision: 05
[4294672.373000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] - 
 > GSI 20 (level, low) -> IRQ 177
[4294672.411000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[4294672.446000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma  
0xD000 irq 14
[4294672.785000] ata5: dev 0 ATAPI, max UDMA/33
[4295878.655000] SysRq : Show State
[4295878.655000]
[4295878.655000]                                                sibling
[4295878.655000]   task             PC      pid father child younger  
older
[4295878.655000] swapper       D C0374BC0     0     1      0      
2               (L-TLB)
[4295878.655000] c1921d30 0000007b 0000007b c0374bc0 c0117d2d  
00000060 00000286 00000036
[4295878.655000]        c1921d40 00325aa0 6fbe5080 00000000 78be6440  
000f41fb c18fea50 c18feb78
[4295878.655000]        c1921dc8 c1921d64 c1920000 c1921d84 c03285af  
00000000 c18fea50 c0114460
[4295878.655000] Call Trace:
[4295878.655000]  [<c0117d2d>] release_console_sem+0x1d/0xa0
[4295878.655000]  [<c03285af>] wait_for_completion+0x7f/0xd0
[4295878.655000]  [<c0114460>] default_wake_function+0x0/0x10
[4295878.655000]  [<c0215e09>] __delay+0x9/0x10
[4295878.655000]  [<c0114460>] default_wake_function+0x0/0x10
[4295878.655000]  [<c0298ecf>] ata_dev_identify+0xbf/0x560
[4295878.655000]  [<c0299463>] ata_bus_probe+0x33/0xc0
[4295878.655000]  [<c029d07a>] ata_device_add+0x1ca/0x200
[4295878.655000]  [<c029d7ae>] ata_pci_init_one+0x39e/0x3b0
[4295878.655000]  [<c02d2549>] pci_read+0x29/0x30
[4295878.655000]  [<c02a14d3>] via_init_one+0x123/0x290
[4295878.655000]  [<c021beea>] pci_call_probe+0xa/0x10
[4295878.655000]  [<c021bf3e>] __pci_device_probe+0x4e/0x60
[4295878.655000]  [<c021bf76>] pci_device_probe+0x26/0x60
[4295878.655000]  [<c027bed3>] driver_probe_device+0x33/0xc0
[4295878.655000]  [<c027c03a>] __driver_attach+0x5a/0x60
[4295878.655000]  [<c027b59a>] bus_for_each_dev+0x3a/0x60
[4295878.655000]  [<c027c056>] driver_attach+0x16/0x20
[4295878.655000]  [<c027bfe0>] __driver_attach+0x0/0x60
[4295878.655000]  [<c027ba4b>] bus_add_driver+0x7b/0xd0
[4295878.655000]  [<c027c44f>] driver_register+0x2f/0x40
[4295878.655000]  [<c021c1d5>] __pci_register_driver+0x65/0xa0
[4295878.655000]  [<c0117a27>] printk+0x17/0x20
[4295878.655000]  [<c03ca883>] do_initcalls+0x53/0xb0
[4295878.655000]  [<c03e5445>] netfilter_init+0x65/0x90
[4295878.655000]  [<c0100280>] init+0x0/0x170
[4295878.655000]  [<c0100280>] init+0x0/0x170
[4295878.655000]  [<c01002ba>] init+0x3a/0x170
[4295878.655000]  [<c0100f35>] kernel_thread_helper+0x5/0x10

I've got CONFIG_IDE=n and CONFIG_SCSI_PATA_VIA=y. ata1 and ata2 are  
two other Seagate HDDs on a sata_sil controller. I can provide a full  
dmesg and other details should they be required!

HTH,
Chris

-- 
Chris Boot
bootc@bootc.net
http://www.bootc.net/



[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 2359 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-07 17:32 2.6.14-mm1 libata pata_via Chris Boot
@ 2005-11-08  3:15 ` Alan Cox
  2005-11-08  8:42   ` Chris Boot
  2005-11-08 12:13 ` Sander
  1 sibling, 1 reply; 12+ messages in thread
From: Alan Cox @ 2005-11-08  3:15 UTC (permalink / raw)
  To: Chris Boot; +Cc: linux-kernel

On Llu, 2005-11-07 at 17:32 +0000, Chris Boot wrote:
> Hi all,
> 
> Since I've only got a DVD drive on good ol' PATA, I thought I'd try  
> Alan's latest VIA PATA driver for libata, to see where I got. Well,  
> the machine simply doesn't boot, preferring to get stuck after  
> detecting the drive. I've tried with and without  
> libata.atapi_enabled=1 and get the same result in both cases. Here's  
> my log with some SysRq output that might be useful:

Thanks for giving it a try. Can you also give me an lspci -v for
reference

> [4294672.373000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] - 
>  > GSI 20 (level, low) -> IRQ 177
> [4294672.411000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1

Thats suspicious in itself. I take it the VIA drivers/ide driver works
fine and reports IRQ 1 however ?

> [4294672.446000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma  
> 0xD000 irq 14


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08  3:15 ` Alan Cox
@ 2005-11-08  8:42   ` Chris Boot
  2005-11-09 12:53     ` Chris Boot
  0 siblings, 1 reply; 12+ messages in thread
From: Chris Boot @ 2005-11-08  8:42 UTC (permalink / raw)
  To: Alan Cox; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4404 bytes --]


On 8 Nov 2005, at 3:15, Alan Cox wrote:

> On Llu, 2005-11-07 at 17:32 +0000, Chris Boot wrote:
>> Hi all,
>>
>> Since I've only got a DVD drive on good ol' PATA, I thought I'd try
>> Alan's latest VIA PATA driver for libata, to see where I got. Well,
>> the machine simply doesn't boot, preferring to get stuck after
>> detecting the drive. I've tried with and without
>> libata.atapi_enabled=1 and get the same result in both cases. Here's
>> my log with some SysRq output that might be useful:
>
> Thanks for giving it a try. Can you also give me an lspci -v for
> reference

Relevant parts of lspci:

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600  
AGP] Host Bridge
         Subsystem: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]  
Host Bridge
         Flags: bus master, 66Mhz, medium devsel, latency 8
         Memory at e0000000 (32-bit, prefetchable) [size=64M]
         Capabilities: [80] AGP version 3.5
         Capabilities: [c0] Power Management version 2

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge  
(prog-if 00 [Normal decode])
         Flags: bus master, 66Mhz, medium devsel, latency 0
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
         Memory behind bridge: e4000000-e6ffffff
         Prefetchable memory behind bridge: d0000000-dfffffff
         Capabilities: [80] Power Management version 2

[...]

0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420  
SATA RAID Controller (rev 80)
         Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID  
Controller
         Flags: bus master, medium devsel, latency 32, IRQ 169
         I/O ports at b800 [size=8]
         I/O ports at bc00 [size=4]
         I/O ports at c000 [size=8]
         I/O ports at c400 [size=4]
         I/O ports at c800 [size=16]
         I/O ports at cc00 [size=256]
         Capabilities: [c0] Power Management version 2

0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/ 
VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a  
[Master SecP PriP])
         Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/ 
VT8233/A/C/VT8235 PIPC Bus Master IDE
         Flags: bus master, medium devsel, latency 32, IRQ 169
         I/O ports at d000 [size=16]
         Capabilities: [c0] Power Management version 2

[...]

>> [4294672.373000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -
>>> GSI 20 (level, low) -> IRQ 177
>> [4294672.411000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
>
> Thats suspicious in itself. I take it the VIA drivers/ide driver works
> fine and reports IRQ 1 however ?

[4294669.230000] Uniform Multi-Platform E-IDE driver Revision:  
7.00alpha2
[4294669.263000] ide: Assuming 33MHz system bus speed for PIO modes;  
override with idebus=xx
[4294669.298000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294669.331000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ  
11, using IRQ 20
[4294669.366000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294669.399000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] - 
 > GSI 20 (level, low) -> IRQ 169
[4294669.436000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[4294669.469000] VP_IDE: chipset revision 6
[4294669.500000] VP_IDE: not 100% native mode: will probe irqs later
[4294669.534000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller  
on pci0000:00:0f.1
[4294669.570000]     ide0: BM-DMA at 0xd000-0xd007, BIOS settings:  
hda:DMA, hdb:pio
[4294669.606000]     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings:  
hdc:pio, hdd:pio
[4294669.642000] Probing IDE interface ide0...
[4294669.688000] input: AT Translated Set 2 keyboard as /class/input/ 
input0
[4294669.725000] atkbd.c: Spurious ACK on isa0060/serio0. Some  
program, like XFree86, might be trying access hardware directly.
[4294669.944000] input: AT Translated Set 2 keyboard as /class/input/ 
input1
[4294670.490000] hda: PHILIPS PBDV1640P, ATAPI CD/DVD-ROM drive
[4294671.137000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.171000] Probing IDE interface ide1...
[4294671.690000] Probing IDE interface ide1...
[4294672.210000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB  
Cache, UDMA(33)
[4294672.247000] Uniform CD-ROM driver Revision: 3.20

>> [4294672.446000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma
>> 0xD000 irq 14
>

HTH,
Chris

-- 
Chris Boot
bootc@bootc.net
http://www.bootc.net/



[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 2359 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08  8:42   ` Chris Boot
@ 2005-11-09 12:53     ` Chris Boot
  0 siblings, 0 replies; 12+ messages in thread
From: Chris Boot @ 2005-11-09 12:53 UTC (permalink / raw)
  To: Alan Cox; +Cc: linux-kernel

Chris Boot wrote:
> 
> On 8 Nov 2005, at 3:15, Alan Cox wrote:
> 
>> On Llu, 2005-11-07 at 17:32 +0000, Chris Boot wrote:
>>
>>> Hi all,
>>>
>>> Since I've only got a DVD drive on good ol' PATA, I thought I'd try
>>> Alan's latest VIA PATA driver for libata, to see where I got. Well,
>>> the machine simply doesn't boot, preferring to get stuck after
>>> detecting the drive. I've tried with and without
>>> libata.atapi_enabled=1 and get the same result in both cases. Here's
>>> my log with some SysRq output that might be useful:
>>
>>
>> Thanks for giving it a try. Can you also give me an lspci -v for
>> reference
> 
> 
[snip]

I got a little further with your -ide1 patch: it boots! However, it 
doesn't detect the drive at all:

[4294671.912000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> 
GSI 20 (level, low) -> IRQ 177
[4294671.949000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[4294671.982000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 
0xD000 irq 14
[4294672.017000] ata5: port disabled. ignoring.
[4294672.048000] scsi4 : pata_via
[4294672.078000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 
0xD008 irq 15
[4294672.113000] ata6: port disabled. ignoring.
[4294672.145000] scsi5 : pata_via

I suppose it might be a bit much asking that an ATAPI drive work on a 
PATA bus with lilbata, but hey... ;-)

Do you think I should try the generic driver?

Cheers,
Chris

-- 
Chris Boot
bootc@bootc.net
http://www.bootc.net/


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-07 17:32 2.6.14-mm1 libata pata_via Chris Boot
  2005-11-08  3:15 ` Alan Cox
@ 2005-11-08 12:13 ` Sander
  2005-11-08 13:06   ` Alan Cox
  1 sibling, 1 reply; 12+ messages in thread
From: Sander @ 2005-11-08 12:13 UTC (permalink / raw)
  To: Alan Cox; +Cc: linux-kernel

Hi Alan,

On a Via Epia MII 10k running 2.6.14-mm1 I can't seem to fdisk or dd
/dev/sde or /dev/sdf. I can mount /dev/sde1, which is a small partition
for /boot, and 'ls /boot' lists the kernels.

I forgot to write down the errors fdisk and dd generate. I did create
the nodes in /dev/ with MAKEDEV.

The two pata disks are master and slave. I might try them on separate
channels later (especially if you want me to :-)

/dev/sd[a-d] are sata disks.

dmesg and lspci -v:


	[cut]
[42949375.120000] libata version 1.12 loaded.
[42949375.120000] sata_promise 0000:00:14.0: version 1.02
[42949375.120000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
[42949375.140000] ata1: SATA max UDMA/133 cmd 0xF8804200 ctl 0xF8804238 bmdma 0x0 irq 12
[42949375.140000] ata2: SATA max UDMA/133 cmd 0xF8804280 ctl 0xF88042B8 bmdma 0x0 irq 12
[42949375.140000] ata3: SATA max UDMA/133 cmd 0xF8804300 ctl 0xF8804338 bmdma 0x0 irq 12
[42949375.140000] ata4: SATA max UDMA/133 cmd 0xF8804380 ctl 0xF88043B8 bmdma 0x0 irq 12
[42949375.220000] input: AT Translated Set 2 keyboard as /class/input/input0
[42949375.530000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
[42949375.530000] ata1: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[42949375.530000] ata1: dev 0 configured for UDMA/133
[42949375.530000] scsi0 : sata_promise
[42949375.920000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
[42949375.920000] ata2: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[42949375.920000] ata2: dev 0 configured for UDMA/133
[42949375.920000] scsi1 : sata_promise
[42949376.310000] ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
[42949376.310000] ata3: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[42949376.310000] ata3: dev 0 configured for UDMA/133
[42949376.310000] scsi2 : sata_promise
[42949376.700000] ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
[42949376.700000] ata4: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[42949376.700000] ata4: dev 0 configured for UDMA/133
[42949376.700000] scsi3 : sata_promise
[42949376.700000]   Vendor: ATA       Model: Maxtor 6B300S0    Rev: BANC
[42949376.700000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.700000]   Vendor: ATA       Model: Maxtor 6B300S0    Rev: BANC
[42949376.700000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.700000]   Vendor: ATA       Model: Maxtor 6B300S0    Rev: BANC
[42949376.700000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.700000]   Vendor: ATA       Model: Maxtor 6B300S0    Rev: BANC
[42949376.700000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.700000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[42949376.700000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 5
[42949376.700000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14
[42949376.860000] ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:047f
[42949376.860000] ata5: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[42949376.860000] ata5: dev 1 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:047f
[42949376.860000] ata5: dev 1 ATA-7, max UDMA/133, 490234752 sectors: LBA48
[42949376.860000] ata5: dev 0 configured for UDMA/100
[42949376.860000] ata5: dev 1 configured for UDMA/100
[42949376.860000] scsi4 : pata_via
[42949376.860000]   Vendor: ATA       Model: Maxtor 6Y200P0    Rev: YAR4
[42949376.860000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.860000]   Vendor: ATA       Model: Maxtor 7Y250P0    Rev: YAR4
[42949376.860000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949376.860000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15
[42949377.030000] ATA: abnormal status 0xFF on port 0x177
[42949377.030000] ata6: disabling port
[42949377.030000] scsi5 : pata_via
[42949377.030000] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.030000] SCSI device sda: drive cache: write back
[42949377.030000] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.030000] SCSI device sda: drive cache: write back
[42949377.030000]  sda: sda1 sda2
[42949377.050000] sd 0:0:0:0: Attached scsi disk sda
[42949377.050000] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.050000] SCSI device sdb: drive cache: write back
[42949377.050000] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.050000] SCSI device sdb: drive cache: write back
[42949377.050000]  sdb: sdb1 sdb2
[42949377.070000] sd 1:0:0:0: Attached scsi disk sdb
[42949377.070000] SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.070000] SCSI device sdc: drive cache: write back
[42949377.070000] SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.070000] SCSI device sdc: drive cache: write back
[42949377.070000]  sdc: sdc1 sdc2
[42949377.090000] sd 2:0:0:0: Attached scsi disk sdc
[42949377.090000] SCSI device sdd: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.090000] SCSI device sdd: drive cache: write back
[42949377.090000] SCSI device sdd: 586114704 512-byte hdwr sectors (300091 MB)
[42949377.090000] SCSI device sdd: drive cache: write back
[42949377.090000]  sdd: sdd1 sdd2
[42949377.110000] sd 3:0:0:0: Attached scsi disk sdd
[42949377.110000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
[42949377.110000] SCSI device sde: drive cache: write back
[42949377.110000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
[42949377.110000] SCSI device sde: drive cache: write back
[42949377.110000]  sde: sde1 sde2
[42949377.130000] sd 4:0:0:0: Attached scsi disk sde
[42949377.130000] SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB)
[42949377.130000] SCSI device sdf: drive cache: write back
[42949377.130000] SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB)
[42949377.130000] SCSI device sdf: drive cache: write back
[42949377.130000]  sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.210000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.280000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.280000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.280000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.280000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.360000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.360000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.360000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.360000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.430000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.430000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.430000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.430000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.510000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.510000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.510000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.510000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.510000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949377.510000] sdf: Current: sense key: Aborted Command
[42949377.510000]     Additional sense: Scsi parity error
[42949377.510000] Info fld=0x0
[42949377.510000] end_request: I/O error, dev sdf, sector 0
[42949377.510000] Buffer I/O error on device sdf, logical block 0
[42949377.580000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.580000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.580000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.580000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.660000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.660000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.660000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.660000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.730000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.730000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.730000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.730000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.810000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.810000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.810000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.810000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.880000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949377.880000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949377.880000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949377.880000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949377.880000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949377.880000] sdf: Current: sense key: Aborted Command
[42949377.880000]     Additional sense: Scsi parity error
[42949377.880000] Info fld=0x0
[42949377.880000] end_request: I/O error, dev sdf, sector 0
[42949377.880000] Buffer I/O error on device sdf, logical block 0
[42949377.880000]  unable to read partition table
[42949377.880000] sd 4:0:1:0: Attached scsi disk sdf
[42949377.880000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[42949377.880000] Yenta: CardBus bridge found at 0000:00:0a.0 [1106:aa01]
[42949378.020000] Yenta: ISA IRQ mask 0x0c08, PCI irq 5
[42949378.020000] Socket status: 30000006
[42949378.280000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
[42949378.280000] Yenta: CardBus bridge found at 0000:00:0a.1 [1106:aa01]
[42949378.420000] Yenta: ISA IRQ mask 0x0c08, PCI irq 12
[42949378.420000] Socket status: 30000006
[42949378.680000] DLM (built Nov  8 2005 11:23:33) installed
[42949378.680000] md: linear personality registered as nr 1
[42949378.680000] md: raid0 personality registered as nr 2
[42949378.680000] md: raid1 personality registered as nr 3
[42949378.680000] md: raid10 personality registered as nr 9
[42949378.680000] md: raid5 personality registered as nr 4
[42949378.680000] raid5: automatically using best checksumming function: pIII_sse
[42949378.730000]    pIII_sse  :  2684.000 MB/sec
[42949378.730000] raid5: using function: pIII_sse (2684.000 MB/sec)
[42949378.900000] raid6: int32x1    166 MB/s
[42949379.070000] raid6: int32x2    200 MB/s
[42949379.240000] raid6: int32x4    182 MB/s
[42949379.410000] raid6: int32x8    135 MB/s
[42949379.580000] raid6: mmxx1      418 MB/s
[42949379.750000] raid6: mmxx2      588 MB/s
[42949379.920000] raid6: sse1x1     362 MB/s
[42949380.090000] raid6: sse1x2     555 MB/s
[42949380.090000] raid6: using algorithm sse1x2 (555 MB/s)
[42949380.090000] md: raid6 personality registered as nr 8
[42949380.090000] md: multipath personality registered as nr 7
[42949380.090000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[42949380.090000] md: bitmap version 4.39
[42949380.090000] NET: Registered protocol family 2
[42949380.190000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[42949380.190000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[42949380.190000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[42949380.190000] TCP: Hash tables configured (established 131072 bind 65536)
[42949380.190000] TCP reno registered
[42949380.190000] TCP bic registered
[42949380.190000] Initializing IPsec netlink socket
[42949380.190000] NET: Registered protocol family 1
[42949380.190000] NET: Registered protocol family 10
[42949380.190000] Disabled Privacy Extensions on device c03d6100(lo)
[42949380.190000] IPv6 over IPv4 tunneling driver
[42949380.190000] NET: Registered protocol family 17
[42949380.250000] SCTP: Hash tables configured (established 65536 bind 65536)
[42949380.250000] Using IPI Shortcut mode
[42949380.250000] ACPI wakeup devices: 
[42949380.250000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1 
[42949380.250000] ACPI: (supports S0 S1 S3 S4 S5)
[42949380.250000] md: Autodetecting RAID arrays.
[42949380.340000] md: autorun ...
[42949380.340000] md: considering sdd1 ...
[42949380.340000] md:  adding sdd1 ...
[42949380.340000] md:  adding sdc1 ...
[42949380.340000] md:  adding sdb1 ...
[42949380.340000] md:  adding sda1 ...
[42949380.340000] md: created md0
[42949380.340000] md: bind<sda1>
[42949380.340000] md: bind<sdb1>
[42949380.340000] md: bind<sdc1>
[42949380.340000] md: bind<sdd1>
[42949380.340000] md: running: <sdd1><sdc1><sdb1><sda1>
[42949380.340000] raid1: raid set md0 active with 4 out of 4 mirrors
[42949380.340000] md: ... autorun DONE.
[42949380.350000] VFS: Mounted root (ext2 filesystem) readonly.
[42949380.350000] Freeing unused kernel memory: 168k freed
[42949381.600000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[42949384.390000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[42949452.690000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[42949452.860000] spurious 8259A interrupt: IRQ7.
[42949463.620000] eth0: no IPv6 routers present
[42949589.450000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949589.450000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949589.450000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949589.450000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949589.520000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949589.520000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949589.520000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949589.520000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949589.590000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949589.590000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949589.590000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949589.590000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949589.650000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949589.650000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949589.650000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949589.650000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949589.700000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949589.700000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949589.700000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949589.700000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949589.700000] sd 4:0:0:0: SCSI error: return code = 0x8000002
[42949589.700000] sde: Current: sense key: Aborted Command
[42949589.700000]     Additional sense: Scsi parity error
[42949589.700000] Info fld=0x0
[42949589.700000] end_request: I/O error, dev sde, sector 0
[42949589.700000] Buffer I/O error on device sde, logical block 0
[42949593.730000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949593.730000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949593.730000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949593.730000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949593.810000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949593.810000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949593.810000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949593.810000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949593.880000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949593.880000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949593.880000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949593.880000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949593.960000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949593.960000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949593.960000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949593.960000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.030000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.030000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.030000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.030000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.030000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949594.030000] sdf: Current: sense key: Aborted Command
[42949594.030000]     Additional sense: Scsi parity error
[42949594.030000] Info fld=0x0
[42949594.030000] end_request: I/O error, dev sdf, sector 0
[42949594.030000] Buffer I/O error on device sdf, logical block 0
[42949594.110000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.110000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.110000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.110000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.180000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.180000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.180000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.180000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.260000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.260000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.260000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.260000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.330000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.330000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.330000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.330000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.410000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.410000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.410000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.410000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.410000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949594.410000] sdf: Current: sense key: Aborted Command
[42949594.410000]     Additional sense: Scsi parity error
[42949594.410000] Info fld=0x8
[42949594.410000] end_request: I/O error, dev sdf, sector 8
[42949594.410000] Buffer I/O error on device sdf, logical block 1
[42949594.480000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.480000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.480000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.480000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.560000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.560000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.560000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.560000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.630000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.630000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.630000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.630000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.710000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.710000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.710000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.710000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.780000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.780000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.780000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.780000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.780000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949594.780000] sdf: Current: sense key: Aborted Command
[42949594.780000]     Additional sense: Scsi parity error
[42949594.780000] Info fld=0x10
[42949594.780000] end_request: I/O error, dev sdf, sector 16
[42949594.780000] Buffer I/O error on device sdf, logical block 2
[42949594.860000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.860000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.860000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.860000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949594.930000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949594.930000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949594.930000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949594.930000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949595.010000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949595.010000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949595.010000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949595.010000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949595.080000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949595.080000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949595.080000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949595.080000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949595.160000] ata5: command error, drv_stat 0x51 host_stat 0x64
[42949595.160000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
[42949595.160000] ata5: status=0x51 { DriveReady SeekComplete Error }
[42949595.160000] ata5: error=0x84 { DriveStatusError BadCRC }
[42949595.160000] sd 4:0:1:0: SCSI error: return code = 0x8000002
[42949595.160000] sdf: Current: sense key: Aborted Command
[42949595.160000]     Additional sense: Scsi parity error
[42949595.160000] Info fld=0x0
[42949595.160000] end_request: I/O error, dev sdf, sector 0
[42949595.160000] Buffer I/O error on device sdf, logical block 0



0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, 66MHz, medium devsel, latency 8
	Memory at e7000000 (32-bit, prefetchable) [size=4M]
	Capabilities: [a0] AGP version 2.0
	Capabilities: [c0] Power Management version 2

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: e4000000-e5ffffff
	Prefetchable memory behind bridge: e0000000-e3ffffff
	Capabilities: [80] Power Management version 2

0000:00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 168, IRQ 5
	Memory at e742b000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 40000000-41fff000 (prefetchable)
	Memory window 1: 42000000-43fff000
	I/O window 0: 00001000-00001fff
	I/O window 1: 00002000-00002fff
	16-bit legacy interface ports at 0001

0000:00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 168, IRQ 12
	Memory at e7423000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 44000000-45fff000 (prefetchable)
	Memory window 1: 46000000-47fff000
	I/O window 0: 00003000-00003fff
	I/O window 1: 00004000-00004fff
	16-bit legacy interface ports at 0001

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 32, IRQ 5
	I/O ports at c000 [size=32]
	Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 32, IRQ 12
	I/O ports at c400 [size=32]
	Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 32, IRQ 7
	I/O ports at c800 [size=32]
	Capabilities: [80] Power Management version 2

0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0
	Flags: bus master, medium devsel, latency 32, IRQ 9
	Memory at e7428000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, stepping, medium devsel, latency 0
	Capabilities: [c0] Power Management version 2

0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc.: Unknown device aa01
	Flags: bus master, medium devsel, latency 32, IRQ 5
	I/O ports at cc00 [size=16]
	Capabilities: [c0] Power Management version 2

0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
	Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
	Flags: bus master, medium devsel, latency 32, IRQ 5
	I/O ports at d400 [size=256]
	Memory at e7429000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2

0000:00:14.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
	Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
	Flags: bus master, 66MHz, medium devsel, latency 96, IRQ 12
	I/O ports at d800 [size=64]
	I/O ports at dc00 [size=16]
	I/O ports at e000 [size=128]
	Memory at e742a000 (32-bit, non-prefetchable) [size=4K]
	Memory at e7400000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at 48000000 [disabled] [size=16K]
	Capabilities: [60] Power Management version 2

0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA])
	Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5
	Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at e5000000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
	Capabilities: [70] AGP version 2.0

-- 
Humilis IT Services and Solutions
http://www.humilis.net

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 12:13 ` Sander
@ 2005-11-08 13:06   ` Alan Cox
  2005-11-08 14:21     ` Sander
                       ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Alan Cox @ 2005-11-08 13:06 UTC (permalink / raw)
  To: sander; +Cc: linux-kernel

On Maw, 2005-11-08 at 13:13 +0100, Sander wrote:
> The two pata disks are master and slave. I might try them on separate
> channels later (especially if you want me to :-)

Would be interesting. It shouldn't change the behaviour but more info is
good.

> [42949377.130000]  sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64
> [42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
> [42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error }

Thats the important bit. It looks as if I got the timing clock loading
wrong for this chip. (My EPIA works nicely but all the info I need is in
your report).

Thanks

Alan


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 13:06   ` Alan Cox
@ 2005-11-08 14:21     ` Sander
  2005-11-08 16:41       ` Alan Cox
  2005-11-08 16:34     ` Alan Cox
  2005-11-16 14:48     ` Sander
  2 siblings, 1 reply; 12+ messages in thread
From: Sander @ 2005-11-08 14:21 UTC (permalink / raw)
  To: Alan Cox; +Cc: sander, linux-kernel

Alan Cox wrote (ao):
> On Maw, 2005-11-08 at 13:13 +0100, Sander wrote:
> > The two pata disks are master and slave. I might try them on separate
> > channels later (especially if you want me to :-)
> 
> Would be interesting. It shouldn't change the behaviour but more info
> is good.

I'll do.

> > [42949377.130000]  sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64
> > [42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
> > [42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error }
> 
> Thats the important bit. It looks as if I got the timing clock loading
> wrong for this chip. (My EPIA works nicely but all the info I need is in
> your report).

Good to know.

I see your new patch against 2.6.14-mm1 has updates for pata_via.c. It
does not address this issue I presume?

-- 
Humilis IT Services and Solutions
http://www.humilis.net

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 14:21     ` Sander
@ 2005-11-08 16:41       ` Alan Cox
  0 siblings, 0 replies; 12+ messages in thread
From: Alan Cox @ 2005-11-08 16:41 UTC (permalink / raw)
  To: sander; +Cc: linux-kernel

On Maw, 2005-11-08 at 15:21 +0100, Sander wrote:
> > Thats the important bit. It looks as if I got the timing clock loading
> > wrong for this chip. (My EPIA works nicely but all the info I need is in
> > your report).
> 
> Good to know.
> 
> I see your new patch against 2.6.14-mm1 has updates for pata_via.c. It
> does not address this issue I presume?

It may do because it adds per device tuning and in doing so makes sure
that no device calls are made before the speed setting of both devices
has been made.


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 13:06   ` Alan Cox
  2005-11-08 14:21     ` Sander
@ 2005-11-08 16:34     ` Alan Cox
  2005-11-16 14:03       ` Sander
  2005-11-16 14:48     ` Sander
  2 siblings, 1 reply; 12+ messages in thread
From: Alan Cox @ 2005-11-08 16:34 UTC (permalink / raw)
  To: sander; +Cc: linux-kernel

On Maw, 2005-11-08 at 13:06 +0000, Alan Cox wrote:
> On Maw, 2005-11-08 at 13:13 +0100, Sander wrote:
> > The two pata disks are master and slave. I might try them on separate
> > channels later (especially if you want me to :-)
> 
> Would be interesting. It shouldn't change the behaviour but more info is
> good.

Also can you tell me if the drives are on 40 or 80 wire cables ?


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 16:34     ` Alan Cox
@ 2005-11-16 14:03       ` Sander
  0 siblings, 0 replies; 12+ messages in thread
From: Sander @ 2005-11-16 14:03 UTC (permalink / raw)
  To: Alan Cox; +Cc: sander, linux-kernel

Alan Cox wrote (ao):
> On Maw, 2005-11-08 at 13:06 +0000, Alan Cox wrote:
> > On Maw, 2005-11-08 at 13:13 +0100, Sander wrote:
> > > The two pata disks are master and slave. I might try them on separate
> > > channels later (especially if you want me to :-)
> > 
> > Would be interesting. It shouldn't change the behaviour but more info is
> > good.
> 
> Also can you tell me if the drives are on 40 or 80 wire cables ?

The drives are on a 40 wire cable. I'll change that to 80 right now.

Btw, with unpatched kernel 2.6.14-mm2 I don't see the drives anymore.

# zgrep CONFIG_SCSI_PATA_VIA /proc/config.gz 
CONFIG_SCSI_PATA_VIA=y

-- 
Humilis IT Services and Solutions
http://www.humilis.net

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-08 13:06   ` Alan Cox
  2005-11-08 14:21     ` Sander
  2005-11-08 16:34     ` Alan Cox
@ 2005-11-16 14:48     ` Sander
  2005-11-18 19:07       ` Alan Cox
  2 siblings, 1 reply; 12+ messages in thread
From: Sander @ 2005-11-16 14:48 UTC (permalink / raw)
  To: Alan Cox; +Cc: sander, linux-kernel

Alan Cox wrote (ao):
> On Maw, 2005-11-08 at 13:13 +0100, Sander wrote:
> > [42949377.130000]  sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64
> > [42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
> > [42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error }
> 
> Thats the important bit. It looks as if I got the timing clock loading
> wrong for this chip. (My EPIA works nicely but all the info I need is in
> your report).

I have one disk now, on an 80 wire cable. The system boots from the disk
but can't find it afterwards:

[42949376.200000] pata_via 0000:00:11.1: version 0.1.1
[42949376.200000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[42949376.200000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 5
[42949376.200000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14
[42949376.200000] ata5: port disabled. ignoring.
[42949376.200000] scsi4 : pata_via
[42949376.200000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15
[42949376.370000] ATA: abnormal status 0xFF on port 0x177
[42949376.370000] ata6: disabling port
[42949376.370000] scsi5 : pata_via


(2.6.14-mm2, Epia MII 10000, Maxtor 250GB pata).

This is what 2.6.14-mm1 reports:

[42949378.560000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14
[42949378.720000] ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
[42949378.720000] ata5: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[42949378.720000] ata5: dev 0 configured for UDMA/100
[42949378.720000] scsi4 : pata_via
[42949378.720000]   Vendor: ATA       Model: Maxtor 6Y200P0    Rev: YAR4
[42949378.720000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[42949378.720000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15
[42949378.890000] ATA: abnormal status 0xFF on port 0x177
[42949378.890000] ata6: disabling port
[42949378.890000] scsi5 : pata_via
[ ... ]
[42949378.970000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
[42949378.970000] SCSI device sde: drive cache: write back
[42949378.970000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB)
[42949378.970000] SCSI device sde: drive cache: write back
[42949378.970000]  sde: sde1 sde2
[42949378.990000] sd 4:0:0:0: Attached scsi disk sde


Btw, now I _can_ fdisk /dev/sde, while I could not do so with a
slave disk and a 40 wire cable.

-- 
Humilis IT Services and Solutions
http://www.humilis.net

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: 2.6.14-mm1 libata pata_via
  2005-11-16 14:48     ` Sander
@ 2005-11-18 19:07       ` Alan Cox
  0 siblings, 0 replies; 12+ messages in thread
From: Alan Cox @ 2005-11-18 19:07 UTC (permalink / raw)
  To: sander; +Cc: linux-kernel

On Mer, 2005-11-16 at 15:48 +0100, Sander wrote:
> (2.6.14-mm2, Epia MII 10000, Maxtor 250GB pata).

mm2 has some buggy changes to the via driver versus mm1 (my fault not
Jeffs). I've been travelling so now I'm back I'll send some patches once
I've finished the more urgent things on the todo list (like writing the
presentation for Monday ;))

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2005-11-18 18:35 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-07 17:32 2.6.14-mm1 libata pata_via Chris Boot
2005-11-08  3:15 ` Alan Cox
2005-11-08  8:42   ` Chris Boot
2005-11-09 12:53     ` Chris Boot
2005-11-08 12:13 ` Sander
2005-11-08 13:06   ` Alan Cox
2005-11-08 14:21     ` Sander
2005-11-08 16:41       ` Alan Cox
2005-11-08 16:34     ` Alan Cox
2005-11-16 14:03       ` Sander
2005-11-16 14:48     ` Sander
2005-11-18 19:07       ` Alan Cox

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox