* Re: ucb1x00 audio & zaurus touchscreen
2006-03-22 12:20 ucb1x00 audio & zaurus touchscreen Pavel Machek
2006-03-22 13:53 ` Russell King
2006-03-22 20:10 ` David Vrabel
@ 2006-03-23 14:40 ` David Vrabel
2006-03-23 15:44 ` Russell King
2 siblings, 1 reply; 7+ messages in thread
From: David Vrabel @ 2006-03-23 14:40 UTC (permalink / raw)
To: Pavel Machek; +Cc: rpurdie, lenz, kernel list, Russell King
[-- Attachment #1: Type: text/plain, Size: 554 bytes --]
Pavel Machek wrote:
> Hi!
>
> First, I'd like to ask: what is status of ucb1x00 audio in 2.6? I do
> have .c file here, but do not have corresponding header files...
>
> Then, I'd like to announce that I finally got touchscreen to somehow
> work. Patch is very ugly and adds filtering into kernel (no-no), but
> does the trick, and can even coexist with battery reading code. [Don't
> bother commenting on style of this patch, it is for ilustration, I'd
> not be crazy enough to try to push it.]
This is what I have lurking in an equally hacky state.
[-- Attachment #2: drivers-mfd-ucb1400-ts.patch --]
[-- Type: text/plain, Size: 16493 bytes --]
%description
This is a really nasty hack which I used simply to verify that
the touchscreen hardware on the GX533 worked correctly. It came
from a bit-rotted patch found on the L-K mailing list and war forcefully
forward ported to the current tree. It needs some serious cleaning up
before it gets used...
It hangs when you close the input device because semaphores and kthread_stop
cannot play nice together.
%patch
Index: linux-2.6-working/drivers/mfd/Kconfig
===================================================================
--- linux-2.6-working.orig/drivers/mfd/Kconfig 2006-03-01 13:39:20.000000000 +0000
+++ linux-2.6-working/drivers/mfd/Kconfig 2006-03-01 13:39:20.000000000 +0000
@@ -26,4 +26,7 @@
tristate "Touchscreen interface support"
depends on MCP_UCB1200 && INPUT
+config UCB1400_TS
+ tristate "UCB1400 Touchscreen support"
+
endmenu
Index: linux-2.6-working/drivers/mfd/Makefile
===================================================================
--- linux-2.6-working.orig/drivers/mfd/Makefile 2006-03-01 13:39:20.000000000 +0000
+++ linux-2.6-working/drivers/mfd/Makefile 2006-03-01 13:39:20.000000000 +0000
@@ -11,3 +11,6 @@
ifeq ($(CONFIG_SA1100_ASSABET),y)
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
+
+ucb1400-core-y := ucb1x00-core.o
+obj-$(CONFIG_UCB1400_TS) += ucb1400-core.o ucb1x00-ts.o
Index: linux-2.6-working/drivers/mfd/ucb1x00-core.c
===================================================================
--- linux-2.6-working.orig/drivers/mfd/ucb1x00-core.c 2006-03-01 13:37:51.000000000 +0000
+++ linux-2.6-working/drivers/mfd/ucb1x00-core.c 2006-03-06 11:21:33.000000000 +0000
@@ -27,10 +27,17 @@
#include <linux/mutex.h>
#include <asm/dma.h>
+#ifdef CONFIG_ARCH_ARM
#include <asm/hardware.h>
+#endif
#include "ucb1x00.h"
+/* NO_IRQ is ARM only? probe_irq_off returns 0 if no IRQ found on i386 */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
@@ -58,9 +65,9 @@
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_dir |= out;
ucb->io_dir &= ~in;
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
- spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
@@ -86,9 +93,9 @@
spin_lock_irqsave(&ucb->io_lock, flags);
ucb->io_out |= set;
ucb->io_out &= ~clear;
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
- spin_unlock_irqrestore(&ucb->io_lock, flags);
}
/**
@@ -162,6 +169,7 @@
unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
{
unsigned int val;
+ unsigned int timeout = 50;
if (sync)
adc_channel |= UCB_ADC_SYNC_ENA;
@@ -169,14 +177,12 @@
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
- for (;;) {
+ do {
val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
if (val & UCB_ADC_DAT_VAL)
break;
- /* yield to other processes */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ udelay(1);
+ } while (--timeout);
return UCB_ADC_DAT(val);
}
@@ -249,13 +255,13 @@
irq = ucb->irq_handler + idx;
ret = -EBUSY;
- spin_lock_irq(&ucb->lock);
+ down(&ucb->lock);
if (irq->fn == NULL) {
irq->devid = devid;
irq->fn = fn;
ret = 0;
}
- spin_unlock_irq(&ucb->lock);
+ up(&ucb->lock);
}
return ret;
}
@@ -272,10 +278,8 @@
*/
void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
{
- unsigned long flags;
-
if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
+ down(&ucb->lock);
ucb1x00_enable(ucb);
if (edges & UCB_RISING) {
@@ -287,7 +291,7 @@
ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
}
ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
+ up(&ucb->lock);
}
}
@@ -301,22 +305,23 @@
*/
void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
{
- unsigned long flags;
-
if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
-
- ucb1x00_enable(ucb);
- if (edges & UCB_RISING) {
+ down(&ucb->lock);
+ /* This can't be right. Can it? */
+ if (edges & UCB_RISING)
+ ucb->irq_ris_enbl |= 1 << idx;
+ if (edges & UCB_FALLING)
+ ucb->irq_fal_enbl |= 1 << idx;
+ if (edges & UCB_RISING)
ucb->irq_ris_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- }
- if (edges & UCB_FALLING) {
+ if (edges & UCB_FALLING)
ucb->irq_fal_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- }
+ up(&ucb->lock);
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
}
}
@@ -344,21 +349,22 @@
irq = ucb->irq_handler + idx;
ret = -ENOENT;
- spin_lock_irq(&ucb->lock);
+ down(&ucb->lock);
if (irq->devid == devid) {
ucb->irq_ris_enbl &= ~(1 << idx);
ucb->irq_fal_enbl &= ~(1 << idx);
- ucb1x00_enable(ucb);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- ucb1x00_disable(ucb);
-
irq->fn = NULL;
irq->devid = NULL;
ret = 0;
}
- spin_unlock_irq(&ucb->lock);
+ up(&ucb->lock);
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+ ucb1x00_disable(ucb);
+
return ret;
bad:
@@ -478,7 +484,8 @@
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
- if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+ if (id != UCB_ID_1200 && id != UCB_ID_1300 &&
+ id != UCB_ID_1400 && id != UCB_ID_1400_BUGGY) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto err_disable;
}
@@ -494,7 +501,7 @@
ucb->cdev.dev = &mcp->attached_device;
strlcpy(ucb->cdev.class_id, "ucb1x00", sizeof(ucb->cdev.class_id));
- spin_lock_init(&ucb->lock);
+ init_MUTEX(&ucb->lock);
spin_lock_init(&ucb->io_lock);
sema_init(&ucb->adc_sem, 1);
@@ -502,17 +509,15 @@
ucb->mcp = mcp;
ucb->irq = ucb1x00_detect_irq(ucb);
if (ucb->irq == NO_IRQ) {
- printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
- ret = -ENODEV;
- goto err_free;
- }
-
- ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
- "UCB1x00", ucb);
- if (ret) {
- printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
- ucb->irq, ret);
- goto err_free;
+ printk(KERN_WARNING "UCB1x00: IRQ probe failed -- using polled mode\n");
+ } else {
+ ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
+ "UCB1x00", ucb);
+ if (ret) {
+ printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+ ucb->irq, ret);
+ goto err_free;
+ }
}
mcp_set_drvdata(mcp, ucb);
@@ -531,7 +536,8 @@
goto out;
err_irq:
- free_irq(ucb->irq, ucb);
+ if (ucb->irq != NO_IRQ)
+ free_irq(ucb->irq, ucb);
err_free:
kfree(ucb);
err_disable:
@@ -553,7 +559,8 @@
}
mutex_unlock(&ucb1x00_mutex);
- free_irq(ucb->irq, ucb);
+ if (ucb->irq != NO_IRQ)
+ free_irq(ucb->irq, ucb);
class_device_unregister(&ucb->cdev);
}
Index: linux-2.6-working/drivers/mfd/ucb1x00-ts.c
===================================================================
--- linux-2.6-working.orig/drivers/mfd/ucb1x00-ts.c 2006-03-01 13:37:51.000000000 +0000
+++ linux-2.6-working/drivers/mfd/ucb1x00-ts.c 2006-03-06 11:21:33.000000000 +0000
@@ -35,18 +35,23 @@
#include <asm/dma.h>
#include <asm/semaphore.h>
+#ifdef CONFIG_ARM
#include <asm/arch/collie.h>
#include <asm/mach-types.h>
+#else
+#define machine_is_collie() 0
+#include <asm-arm/arch-sa1100/collie.h>
+#endif
#include "ucb1x00.h"
-
struct ucb1x00_ts {
struct input_dev *idev;
struct ucb1x00 *ucb;
- wait_queue_head_t irq_wait;
+ struct semaphore irq_wait;
struct task_struct *rtask;
+
u16 x_res;
u16 y_res;
@@ -77,10 +82,12 @@
*/
static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
- UCB_TS_CR_MODE_INT);
+ int val = UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+ UCB_TS_CR_MODE_INT;
+ if (ts->ucb->id == UCB_ID_1400_BUGGY)
+ val &= ~(UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, val);
}
/*
@@ -172,7 +179,7 @@
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSMX, ts->adcsync);
}
/*
@@ -184,28 +191,27 @@
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSMX, ts->adcsync);
}
static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
{
unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
if (machine_is_collie())
- return (!(val & (UCB_TS_CR_TSPX_LOW)));
+ return val & (UCB_TS_CR_TSPX_LOW);
else
- return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+ return !(val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
}
/*
* This is a RT kernel thread that handles the ADC accesses
* (mainly so we can use semaphores in the UCB1200 core code
- * to serialise accesses to the ADC).
+ * to serialise accesses to the ADC). The UCB1400 access
+ * functions are expected to be able to sleep as well.
*/
static int ucb1x00_thread(void *_ts)
{
struct ucb1x00_ts *ts = _ts;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
int valid;
/*
@@ -217,10 +223,9 @@
valid = 0;
- add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {
unsigned int x, y, p;
- signed long timeout;
+ int is_pen_down;
ts->restart = 0;
@@ -229,24 +234,31 @@
x = ucb1x00_ts_read_xpos(ts);
y = ucb1x00_ts_read_ypos(ts);
p = ucb1x00_ts_read_pressure(ts);
-
/*
- * Switch back to interrupt mode.
+ * Switch back to interrupt/pen detect mode.
*/
ucb1x00_ts_mode_int(ts);
+
ucb1x00_adc_disable(ts->ucb);
- msleep(10);
+ msleep(1);
ucb1x00_enable(ts->ucb);
+ is_pen_down = ucb1x00_ts_pen_down(ts);
+ ucb1x00_disable(ts->ucb);
+ if (is_pen_down) {
+ /*
+ * Filtering is policy. Policy belongs in user
+ * space. We therefore leave it to user space
+ * to do any filtering they please.
+ */
+ if (!ts->restart) {
+ ucb1x00_ts_evt_add(ts, p, x, y);
+ valid = 1;
+ }
-
- if (ucb1x00_ts_pen_down(ts)) {
- set_task_state(tsk, TASK_INTERRUPTIBLE);
-
- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
- ucb1x00_disable(ts->ucb);
-
+ schedule_timeout_interruptible(1);
+ } else {
/*
* If we spat out a valid sample set last time,
* spit out a "pen off" sample here.
@@ -256,31 +268,26 @@
valid = 0;
}
- timeout = MAX_SCHEDULE_TIMEOUT;
- } else {
- ucb1x00_disable(ts->ucb);
-
/*
- * Filtering is policy. Policy belongs in user
- * space. We therefore leave it to user space
- * to do any filtering they please.
+ * Since ucb1x00_enable_irq() might sleep due
+ * to the way the UCB1400 regs are accessed, we
+ * can't use set_task_state() before that call,
+ * and not changing state before enabling the
+ * interrupt is racy. A semaphore solves all
+ * those issues quite nicely.
*/
- if (!ts->restart) {
- ucb1x00_ts_evt_add(ts, p, x, y);
- valid = 1;
+ if (ts->ucb->irq) {
+ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX,
+ machine_is_collie() ? UCB_RISING : UCB_FALLING);
+ down_interruptible(&ts->irq_wait);
+ } else {
+ schedule_timeout_interruptible(msecs_to_jiffies(100));
}
-
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- timeout = HZ / 100;
}
try_to_freeze();
-
- schedule_timeout(timeout);
}
- remove_wait_queue(&ts->irq_wait, &wait);
-
ts->rtask = NULL;
return 0;
}
@@ -293,7 +300,7 @@
{
struct ucb1x00_ts *ts = id;
ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
- wake_up(&ts->irq_wait);
+ up(&ts->irq_wait);
}
static int ucb1x00_ts_open(struct input_dev *idev)
@@ -303,7 +310,7 @@
BUG_ON(ts->rtask);
- init_waitqueue_head(&ts->irq_wait);
+ sema_init(&ts->irq_wait, 0);
ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
if (ret < 0)
goto out;
@@ -337,9 +344,11 @@
{
struct ucb1x00_ts *ts = idev->private;
+ printk(KERN_DEBUG "ucb1x00_ts_close: stop thread\n");
if (ts->rtask)
kthread_stop(ts->rtask);
+ printk(KERN_DEBUG "ucb1x00_ts_close: free irq and clear CR\n");
ucb1x00_enable(ts->ucb);
ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
@@ -358,7 +367,7 @@
* after sleep.
*/
ts->restart = 1;
- wake_up(&ts->irq_wait);
+ up(&ts->irq_wait);
}
return 0;
}
Index: linux-2.6-working/drivers/mfd/ucb1x00.h
===================================================================
--- linux-2.6-working.orig/drivers/mfd/ucb1x00.h 2006-01-03 03:21:10.000000000 +0000
+++ linux-2.6-working/drivers/mfd/ucb1x00.h 2006-03-03 16:03:27.000000000 +0000
@@ -10,8 +10,47 @@
#ifndef UCB1200_H
#define UCB1200_H
+#if 1 // def CONFIG_ARCH_PXA
+
+/* ucb1400 aclink register mappings: */
+
+#define UCB_IO_DATA 0x5a
+#define UCB_IO_DIR 0x5c
+#define UCB_IE_RIS 0x5e
+#define UCB_IE_FAL 0x60
+#define UCB_IE_STATUS 0x62
+#define UCB_IE_CLEAR 0x62
+#define UCB_TS_CR 0x64
+#define UCB_ADC_CR 0x66
+#define UCB_ADC_DATA 0x68
+#define UCB_ID 0x7e /* 7c is mfr id, 7e part id (from aclink spec) */
+
+#define UCB_ADC_DAT(x) ((x) & 0x3ff)
+
+#else
+
+/* ucb1x00 SIB register mappings: */
+
#define UCB_IO_DATA 0x00
#define UCB_IO_DIR 0x01
+#define UCB_IE_RIS 0x02
+#define UCB_IE_FAL 0x03
+#define UCB_IE_STATUS 0x04
+#define UCB_IE_CLEAR 0x04
+#define UCB_TC_A 0x05
+#define UCB_TC_B 0x06
+#define UCB_AC_A 0x07
+#define UCB_AC_B 0x08
+#define UCB_TS_CR 0x09
+#define UCB_ADC_CR 0x0a
+#define UCB_ADC_DATA 0x0b
+#define UCB_ID 0x0c
+#define UCB_MODE 0x0d
+
+#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5)
+
+#endif
+
#define UCB_IO_0 (1 << 0)
#define UCB_IO_1 (1 << 1)
@@ -24,10 +63,6 @@
#define UCB_IO_8 (1 << 8)
#define UCB_IO_9 (1 << 9)
-#define UCB_IE_RIS 0x02
-#define UCB_IE_FAL 0x03
-#define UCB_IE_STATUS 0x04
-#define UCB_IE_CLEAR 0x04
#define UCB_IE_ADC (1 << 11)
#define UCB_IE_TSPX (1 << 12)
#define UCB_IE_TSMX (1 << 13)
@@ -36,11 +71,9 @@
#define UCB_IRQ_TSPX 12
-#define UCB_TC_A 0x05
#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */
#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */
-#define UCB_TC_B 0x06
#define UCB_TC_B_VOICE_ENA (1 << 3)
#define UCB_TC_B_CLIP (1 << 4)
#define UCB_TC_B_ATT (1 << 6)
@@ -49,14 +82,11 @@
#define UCB_TC_B_IN_ENA (1 << 14)
#define UCB_TC_B_OUT_ENA (1 << 15)
-#define UCB_AC_A 0x07
-#define UCB_AC_B 0x08
#define UCB_AC_B_LOOP (1 << 8)
#define UCB_AC_B_MUTE (1 << 13)
#define UCB_AC_B_IN_ENA (1 << 14)
#define UCB_AC_B_OUT_ENA (1 << 15)
-#define UCB_TS_CR 0x09
#define UCB_TS_CR_TSMX_POW (1 << 0)
#define UCB_TS_CR_TSPX_POW (1 << 1)
#define UCB_TS_CR_TSMY_POW (1 << 2)
@@ -72,7 +102,6 @@
#define UCB_TS_CR_TSPX_LOW (1 << 12)
#define UCB_TS_CR_TSMX_LOW (1 << 13)
-#define UCB_ADC_CR 0x0a
#define UCB_ADC_SYNC_ENA (1 << 0)
#define UCB_ADC_VREFBYP_CON (1 << 1)
#define UCB_ADC_INP_TSPX (0 << 2)
@@ -87,15 +116,13 @@
#define UCB_ADC_START (1 << 7)
#define UCB_ADC_ENA (1 << 15)
-#define UCB_ADC_DATA 0x0b
#define UCB_ADC_DAT_VAL (1 << 15)
-#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5)
-#define UCB_ID 0x0c
#define UCB_ID_1200 0x1004
#define UCB_ID_1300 0x1005
+#define UCB_ID_1400 0x4304
+#define UCB_ID_1400_BUGGY 0x4303 /* fake ID */
-#define UCB_MODE 0x0d
#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
#define UCB_MODE_AUD_OFF_CAN (1 << 13)
@@ -107,11 +134,14 @@
};
struct ucb1x00 {
- spinlock_t lock;
- struct mcp *mcp;
+ struct mcp *mcp; /* this needs to be first */
+ struct semaphore lock;
unsigned int irq;
struct semaphore adc_sem;
spinlock_t io_lock;
+ wait_queue_head_t irq_wait;
+ struct completion complete;
+ struct task_struct *irq_task;
u16 id;
u16 io_dir;
u16 io_out;
^ permalink raw reply [flat|nested] 7+ messages in thread