* Oops when creating software RAID device (2.6.16.14).
@ 2006-06-02 21:35 Tom Wirschell
2006-06-02 23:33 ` Andrew Morton
0 siblings, 1 reply; 3+ messages in thread
From: Tom Wirschell @ 2006-06-02 21:35 UTC (permalink / raw)
To: linux-kernel
I'm trying to set up a Linux software RAID over 12 disks. As mdadm is
creating the array it appears that a drive is flaking out (if anybody
can provide a layman's explanation for what is being complained about,
I'd very much appreciate it). Now, since this is a RAID device I would
expect the md driver to simply discard this device, add the remainder
and leave me with a degraded array. No such luck, though.
Full log: http://www.wirschell.nl/boot.log
Relevant section with oops:
ATA: abnormal status 0x58 on port 0xF88A211C
ata7: PIO error
ATA: abnormal status 0x58 on port 0xF88A211C
ata7: translated ATA stat/err 0x58/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata7: status=0x58 { DriveReady SeekComplete DataRequest }
ATA: abnormal status 0x58 on port 0xF88A211C
ATA: abnormal status 0x58 on port 0xF88A211C
ATA: abnormal status 0x58 on port 0xF88A211C
ATA: abnormal status 0x58 on port 0xF88A211C
ata7: Entering mv_eng_timeout
mmio_base f8880000 ap dfe942a4 qc dfe94770 scsi_cmnd f7741080 &cmnd
f77410c4 ata7: status=0x50 { DriveReady SeekComplete }
ata7: error=0x01 { AddrMarkNotFound }
sdc: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
Assertion failed! qc !=
NULL,drivers/scsi/libata-core.c,ata_pio_poll,line=3017 Assertion
failed! qc != NULL,drivers/scsi/libata-core.c,ata_pio_block,line=3474
Unable to handle kernel NULL pointer dereference at virtual address
00000014 printing eip: c02e47b7
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: raid5 md_mod xor e1000 intel_agp agpgart
CPU: 0
EIP: 0060:[<c02e47b7>] Not tainted VLI
EFLAGS: 00010246 (2.6.16.14 #1)
EIP is at ata_pio_task+0xf2/0x6a1
eax: 00000053 ebx: 00000050 ecx: 00000010 edx: 00000050
esi: 00000002 edi: 00000000 ebp: 00000212 esp: c1a8df34
ds: 007b es: 007b ss: 0068
Process ata/0 (pid: 389, threadinfo=c1a8c000 task=dff1c580)
Stack: <0>00000000 dff1c6a8 dff1c580 c0424100 c1807560 c7562b80
0098966b 00000000 dfe94850 dfe94850 dfe94854 dfd84c40 00000212 c0125ff4
dfe942a4 c02e46c5 dfe942a4 dfd84c4c dfd84c40 dfd84c54 c01260bb c012619b
00000001 00000000 Call Trace:
[<c0125ff4>] run_workqueue+0x78/0xb6
[<c02e46c5>] ata_pio_task+0x0/0x6a1
[<c01260bb>] worker_thread+0x0/0x111
[<c012619b>] worker_thread+0xe0/0x111
[<c01152a3>] default_wake_function+0x0/0x15
[<c0128bcb>] kthread+0xa5/0xd2
[<c0128b26>] kthread+0x0/0xd2
[<c0100bf5>] kernel_thread_helper+0x5/0xb
Code: 56 e3 ff 83 c4 14 0f b6 d3 f6 c2 21 74 1a 83 8f 8c 00 00 00 02 8b
54 24 38 c7 82 dc 05 00 00 07 00 00 00 e9 18 ff ff ff 8d 4f 10 <8a> 41
04 83 e8 05 3c 02 0f 87 c0 01 00 00 80 e2 08 75 13 8b 4c <3>md: invalid
raid superblock magic on sdc2 md: sdc2 has invalid sb, not importing!
md: md_import_device returned -22
Interestingly enough, this problem is entirely reproducable, however so
far each time a different disk was being complained about. Is there
something I should know about the WD200JB drives?
Hardware this is happening on:
Intel P4 3.0GHz CPU
ASUS PSCH-L Mobo (E7210 + 6300ESB)
Promise FastTrak S150 TX4 onboard, unused.
SuperMicro AOC-SAT2-MV8 SATA controller card (Marvell 88SX6081 chip)
2x Western Digital WD2000JB 200 GB PATA drives
9x Western Digital WD2000JD 200 GB SATA drives
If anybody has any insights at so what I can or should do now to
resolve this issue, I'm all ears.
I'm not subscribed to LKML, so please CC me in any replies.
Thank you.
Kind regards,
Tom Wirschell
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Oops when creating software RAID device (2.6.16.14).
2006-06-02 21:35 Oops when creating software RAID device (2.6.16.14) Tom Wirschell
@ 2006-06-02 23:33 ` Andrew Morton
2006-06-03 18:03 ` Tom Wirschell
0 siblings, 1 reply; 3+ messages in thread
From: Andrew Morton @ 2006-06-02 23:33 UTC (permalink / raw)
To: Tom Wirschell; +Cc: linux-kernel, linux-ide
Tom Wirschell <lkml@wirschell.nl> wrote:
>
> I'm trying to set up a Linux software RAID over 12 disks. As mdadm is
> creating the array it appears that a drive is flaking out (if anybody
> can provide a layman's explanation for what is being complained about,
> I'd very much appreciate it). Now, since this is a RAID device I would
> expect the md driver to simply discard this device, add the remainder
> and leave me with a degraded array. No such luck, though.
>
> Full log: http://www.wirschell.nl/boot.log
> Relevant section with oops:
ata_pio_task() oopsed. Added linux-ide to CC.
ISTR others hitting this recently.
> ATA: abnormal status 0x58 on port 0xF88A211C
> ata7: PIO error
> ATA: abnormal status 0x58 on port 0xF88A211C
> ata7: translated ATA stat/err 0x58/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> ata7: status=0x58 { DriveReady SeekComplete DataRequest }
> ATA: abnormal status 0x58 on port 0xF88A211C
> ATA: abnormal status 0x58 on port 0xF88A211C
> ATA: abnormal status 0x58 on port 0xF88A211C
> ATA: abnormal status 0x58 on port 0xF88A211C
> ata7: Entering mv_eng_timeout
> mmio_base f8880000 ap dfe942a4 qc dfe94770 scsi_cmnd f7741080 &cmnd
> f77410c4 ata7: status=0x50 { DriveReady SeekComplete }
> ata7: error=0x01 { AddrMarkNotFound }
> sdc: Current: sense key=0x0
> ASC=0x0 ASCQ=0x0
> Assertion failed! qc !=
> NULL,drivers/scsi/libata-core.c,ata_pio_poll,line=3017 Assertion
> failed! qc != NULL,drivers/scsi/libata-core.c,ata_pio_block,line=3474
> Unable to handle kernel NULL pointer dereference at virtual address
> 00000014 printing eip: c02e47b7
> *pde = 00000000
> Oops: 0000 [#1]
> SMP
> Modules linked in: raid5 md_mod xor e1000 intel_agp agpgart
> CPU: 0
> EIP: 0060:[<c02e47b7>] Not tainted VLI
> EFLAGS: 00010246 (2.6.16.14 #1)
> EIP is at ata_pio_task+0xf2/0x6a1
> eax: 00000053 ebx: 00000050 ecx: 00000010 edx: 00000050
> esi: 00000002 edi: 00000000 ebp: 00000212 esp: c1a8df34
> ds: 007b es: 007b ss: 0068
> Process ata/0 (pid: 389, threadinfo=c1a8c000 task=dff1c580)
> Stack: <0>00000000 dff1c6a8 dff1c580 c0424100 c1807560 c7562b80
> 0098966b 00000000 dfe94850 dfe94850 dfe94854 dfd84c40 00000212 c0125ff4
> dfe942a4 c02e46c5 dfe942a4 dfd84c4c dfd84c40 dfd84c54 c01260bb c012619b
> 00000001 00000000 Call Trace:
> [<c0125ff4>] run_workqueue+0x78/0xb6
> [<c02e46c5>] ata_pio_task+0x0/0x6a1
> [<c01260bb>] worker_thread+0x0/0x111
> [<c012619b>] worker_thread+0xe0/0x111
> [<c01152a3>] default_wake_function+0x0/0x15
> [<c0128bcb>] kthread+0xa5/0xd2
> [<c0128b26>] kthread+0x0/0xd2
> [<c0100bf5>] kernel_thread_helper+0x5/0xb
> Code: 56 e3 ff 83 c4 14 0f b6 d3 f6 c2 21 74 1a 83 8f 8c 00 00 00 02 8b
> 54 24 38 c7 82 dc 05 00 00 07 00 00 00 e9 18 ff ff ff 8d 4f 10 <8a> 41
> 04 83 e8 05 3c 02 0f 87 c0 01 00 00 80 e2 08 75 13 8b 4c <3>md: invalid
> raid superblock magic on sdc2 md: sdc2 has invalid sb, not importing!
> md: md_import_device returned -22
>
> Interestingly enough, this problem is entirely reproducable, however so
> far each time a different disk was being complained about. Is there
> something I should know about the WD200JB drives?
>
> Hardware this is happening on:
> Intel P4 3.0GHz CPU
> ASUS PSCH-L Mobo (E7210 + 6300ESB)
> Promise FastTrak S150 TX4 onboard, unused.
> SuperMicro AOC-SAT2-MV8 SATA controller card (Marvell 88SX6081 chip)
> 2x Western Digital WD2000JB 200 GB PATA drives
> 9x Western Digital WD2000JD 200 GB SATA drives
>
> If anybody has any insights at so what I can or should do now to
> resolve this issue, I'm all ears.
>
> I'm not subscribed to LKML, so please CC me in any replies.
>
> Thank you.
>
> Kind regards,
>
> Tom Wirschell
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Oops when creating software RAID device (2.6.16.14).
2006-06-02 23:33 ` Andrew Morton
@ 2006-06-03 18:03 ` Tom Wirschell
0 siblings, 0 replies; 3+ messages in thread
From: Tom Wirschell @ 2006-06-03 18:03 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-ide
On 02 Jun 2006, Andrew Morton wrote:
>
> ata_pio_task() oopsed. Added linux-ide to CC.
>
> ISTR others hitting this recently.
I upgraded to 2.6.17-rc5-mm2 and dispite a small BUG being reported at
boot by the Marvell SATA driver I was able to create the array and use
it. I'm still testing this setup, but so far it seems to work nicely.
I'll send the maintainer of the Marvell SATA driver the BUG message.
Thanks again.
Kind regards,
Tom Wirschell
I'm not subscribed to LKML or linux-ide, so please CC me in any replies.
--
A small child once asked me why people cant be nicer and just love one
another. I pondered this for but a moment and I then, of course, ate
the small child. He was very tangy and did NOT taste like chicken.
- Lenore 2 -
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-06-03 18:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-02 21:35 Oops when creating software RAID device (2.6.16.14) Tom Wirschell
2006-06-02 23:33 ` Andrew Morton
2006-06-03 18:03 ` Tom Wirschell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox