* 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
@ 2006-09-29 2:13 Miles Lane
2006-09-29 3:04 ` Andrew Morton
0 siblings, 1 reply; 9+ messages in thread
From: Miles Lane @ 2006-09-29 2:13 UTC (permalink / raw)
To: Andrew Morton, LKML, James P. Ketrenos, jgarzik
eth1: RealTek RTL8139 at 0xf9076800, 00:c0:9f:95:18:1b, IRQ 19
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
BUG: unable to handle kernel NULL pointer dereference at virtual
address 000000d0
printing eip:
c11a962e
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
last sysfs file: /class/firmware/0000:01:06.0/loading
Modules linked in: shpchp pci_hotplug intel_agp i2c_i801 agpgart
snd_intel8x0 i2c_core snd_intel8x0m snd_ac97_codec snd_ac97_bus
snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
snd_pcm_oss snd_mixer_oss ata_generic ata_piix libata 8139too sdhci
scsi_mod snd_pcm snd_timer psmouse snd soundcore snd_page_alloc 8139cp
mii yenta_socket rsrc_nonstatic pcmcia_core ohci1394 serio_raw ipw2200
ieee1394 ide_cd cdrom rtc unix ehci_hcd ohci_hcd uhci_hcd usbcore ext3
jbd mbcache
CPU: 0
EIP: 0060:[<c11a962e>] Not tainted VLI
EFLAGS: 00010296 (2.6.18-mm2 #8)
EIP is at klist_node_init+0x2b/0x3a
eax: dff16b08 ebx: 000000a0 ecx: c102ebd7 edx: f63a5f44
esi: dff16afc edi: f910e214 ebp: f63a5f88 esp: f63a5f80
ds: 007b es: 007b ss: 0068
Process probe-0000:01:0 (pid: 1697, ti=f63a4000 task=f639c030 task.ti=f63a4000)
Stack: 000000a0 dff16afc f63a5f98 c11a964f dff16a80 dff16afc f63a5fac c1124295
00000000 dff16a80 f910e214 f63a5fc4 c1124338 f5c17e80 f5c17e80 f633bd90
c11242f0 f63a5fe0 c102a834 ffffffff ffffffff c102a784 00000000 00000000
Call Trace:
[<c11a964f>] klist_add_tail+0x12/0x38
[<c1124295>] device_bind_driver+0x45/0xa0
[<c1124338>] really_probe+0x48/0xb3
[<c102a834>] kthread+0xb0/0xdc
[<c1003abb>] kernel_thread_helper+0x7/0x10
DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
Leftover inexact backtrace:
[<c1003f02>] show_trace_log_lvl+0x12/0x25
[<c1003fa1>] show_stack_log_lvl+0x8c/0x97
[<c100412c>] show_registers+0x180/0x214
[<c1004355>] die+0x195/0x2b0
[<c10148a9>] do_page_fault+0x419/0x4e4
[<c11ac329>] error_code+0x39/0x40
[<c11a964f>] klist_add_tail+0x12/0x38
[<c1124295>] device_bind_driver+0x45/0xa0
[<c1124338>] really_probe+0x48/0xb3
[<c102a834>] kthread+0xb0/0xdc
[<c1003abb>] kernel_thread_helper+0x7/0x10
=======================
Code: 55 89 e5 56 53 89 c3 89 d6 8d 42 04 89 42 04 89 40 04 c7 42 10
00 00 00 00 8d 42 14 e8 f2 14 e8 ff 8d 46 0c e8 80 3d f1 ff 89 1e <8b>
53 30 85 d2 74 04 89 f0 ff d2 5b 5e 5d c3 55 89 e5 56 53 89
EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
<6>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 2:13 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80 Miles Lane
@ 2006-09-29 3:04 ` Andrew Morton
2006-09-29 4:31 ` Miles Lane
0 siblings, 1 reply; 9+ messages in thread
From: Andrew Morton @ 2006-09-29 3:04 UTC (permalink / raw)
To: Miles Lane; +Cc: LKML, James P. Ketrenos, jgarzik
On Thu, 28 Sep 2006 19:13:23 -0700
"Miles Lane" <miles.lane@gmail.com> wrote:
> eth1: RealTek RTL8139 at 0xf9076800, 00:c0:9f:95:18:1b, IRQ 19
> eth1: Identified 8139 chip type 'RTL-8100B/8139D'
> BUG: unable to handle kernel NULL pointer dereference at virtual
> address 000000d0
> printing eip:
> c11a962e
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT
> last sysfs file: /class/firmware/0000:01:06.0/loading
So you got to the stage of loading firmware.
> Modules linked in: shpchp pci_hotplug intel_agp i2c_i801 agpgart
> snd_intel8x0 i2c_core snd_intel8x0m snd_ac97_codec snd_ac97_bus
> snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
> snd_pcm_oss snd_mixer_oss ata_generic ata_piix libata 8139too sdhci
> scsi_mod snd_pcm snd_timer psmouse snd soundcore snd_page_alloc 8139cp
> mii yenta_socket rsrc_nonstatic pcmcia_core ohci1394 serio_raw ipw2200
> ieee1394 ide_cd cdrom rtc unix ehci_hcd ohci_hcd uhci_hcd usbcore ext3
> jbd mbcache
> CPU: 0
> EIP: 0060:[<c11a962e>] Not tainted VLI
> EFLAGS: 00010296 (2.6.18-mm2 #8)
> EIP is at klist_node_init+0x2b/0x3a
> eax: dff16b08 ebx: 000000a0 ecx: c102ebd7 edx: f63a5f44
> esi: dff16afc edi: f910e214 ebp: f63a5f88 esp: f63a5f80
> ds: 007b es: 007b ss: 0068
> Process probe-0000:01:0 (pid: 1697, ti=f63a4000 task=f639c030 task.ti=f63a4000)
> Stack: 000000a0 dff16afc f63a5f98 c11a964f dff16a80 dff16afc f63a5fac c1124295
> 00000000 dff16a80 f910e214 f63a5fc4 c1124338 f5c17e80 f5c17e80 f633bd90
> c11242f0 f63a5fe0 c102a834 ffffffff ffffffff c102a784 00000000 00000000
> Call Trace:
> [<c11a964f>] klist_add_tail+0x12/0x38
> [<c1124295>] device_bind_driver+0x45/0xa0
> [<c1124338>] really_probe+0x48/0xb3
> [<c102a834>] kthread+0xb0/0xdc
> [<c1003abb>] kernel_thread_helper+0x7/0x10
> DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
>
> Leftover inexact backtrace:
>
> [<c1003f02>] show_trace_log_lvl+0x12/0x25
> [<c1003fa1>] show_stack_log_lvl+0x8c/0x97
> [<c100412c>] show_registers+0x180/0x214
> [<c1004355>] die+0x195/0x2b0
> [<c10148a9>] do_page_fault+0x419/0x4e4
> [<c11ac329>] error_code+0x39/0x40
> [<c11a964f>] klist_add_tail+0x12/0x38
> [<c1124295>] device_bind_driver+0x45/0xa0
> [<c1124338>] really_probe+0x48/0xb3
> [<c102a834>] kthread+0xb0/0xdc
> [<c1003abb>] kernel_thread_helper+0x7/0x10
> =======================
> Code: 55 89 e5 56 53 89 c3 89 d6 8d 42 04 89 42 04 89 40 04 c7 42 10
> 00 00 00 00 8d 42 14 e8 f2 14 e8 ff 8d 46 0c e8 80 3d f1 ff 89 1e <8b>
> 53 30 85 d2 74 04 89 f0 ff d2 5b 5e 5d c3 55 89 e5 56 53 89
> EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
> <6>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
Does setting CONFIG_PCI_MULTITHREAD_PROBE=n fix it?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 3:04 ` Andrew Morton
@ 2006-09-29 4:31 ` Miles Lane
2006-09-29 4:49 ` Andrew Morton
0 siblings, 1 reply; 9+ messages in thread
From: Miles Lane @ 2006-09-29 4:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: LKML, James P. Ketrenos, jgarzik
On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> On Thu, 28 Sep 2006 19:13:23 -0700
> "Miles Lane" <miles.lane@gmail.com> wrote:
>
> > eth1: RealTek RTL8139 at 0xf9076800, 00:c0:9f:95:18:1b, IRQ 19
> > eth1: Identified 8139 chip type 'RTL-8100B/8139D'
> > BUG: unable to handle kernel NULL pointer dereference at virtual
> > address 000000d0
> > printing eip:
> > c11a962e
> > *pde = 00000000
> > Oops: 0000 [#1]
> > PREEMPT
> > last sysfs file: /class/firmware/0000:01:06.0/loading
>
> So you got to the stage of loading firmware.
>
> > Modules linked in: shpchp pci_hotplug intel_agp i2c_i801 agpgart
> > snd_intel8x0 i2c_core snd_intel8x0m snd_ac97_codec snd_ac97_bus
> > snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
> > snd_pcm_oss snd_mixer_oss ata_generic ata_piix libata 8139too sdhci
> > scsi_mod snd_pcm snd_timer psmouse snd soundcore snd_page_alloc 8139cp
> > mii yenta_socket rsrc_nonstatic pcmcia_core ohci1394 serio_raw ipw2200
> > ieee1394 ide_cd cdrom rtc unix ehci_hcd ohci_hcd uhci_hcd usbcore ext3
> > jbd mbcache
> > CPU: 0
> > EIP: 0060:[<c11a962e>] Not tainted VLI
> > EFLAGS: 00010296 (2.6.18-mm2 #8)
> > EIP is at klist_node_init+0x2b/0x3a
> > eax: dff16b08 ebx: 000000a0 ecx: c102ebd7 edx: f63a5f44
> > esi: dff16afc edi: f910e214 ebp: f63a5f88 esp: f63a5f80
> > ds: 007b es: 007b ss: 0068
> > Process probe-0000:01:0 (pid: 1697, ti=f63a4000 task=f639c030 task.ti=f63a4000)
> > Stack: 000000a0 dff16afc f63a5f98 c11a964f dff16a80 dff16afc f63a5fac c1124295
> > 00000000 dff16a80 f910e214 f63a5fc4 c1124338 f5c17e80 f5c17e80 f633bd90
> > c11242f0 f63a5fe0 c102a834 ffffffff ffffffff c102a784 00000000 00000000
> > Call Trace:
> > [<c11a964f>] klist_add_tail+0x12/0x38
> > [<c1124295>] device_bind_driver+0x45/0xa0
> > [<c1124338>] really_probe+0x48/0xb3
> > [<c102a834>] kthread+0xb0/0xdc
> > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
> >
> > Leftover inexact backtrace:
> >
> > [<c1003f02>] show_trace_log_lvl+0x12/0x25
> > [<c1003fa1>] show_stack_log_lvl+0x8c/0x97
> > [<c100412c>] show_registers+0x180/0x214
> > [<c1004355>] die+0x195/0x2b0
> > [<c10148a9>] do_page_fault+0x419/0x4e4
> > [<c11ac329>] error_code+0x39/0x40
> > [<c11a964f>] klist_add_tail+0x12/0x38
> > [<c1124295>] device_bind_driver+0x45/0xa0
> > [<c1124338>] really_probe+0x48/0xb3
> > [<c102a834>] kthread+0xb0/0xdc
> > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > =======================
> > Code: 55 89 e5 56 53 89 c3 89 d6 8d 42 04 89 42 04 89 40 04 c7 42 10
> > 00 00 00 00 8d 42 14 e8 f2 14 e8 ff 8d 46 0c e8 80 3d f1 ff 89 1e <8b>
> > 53 30 85 d2 74 04 89 f0 ff d2 5b 5e 5d c3 55 89 e5 56 53 89
> > EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
> > <6>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>
> Does setting CONFIG_PCI_MULTITHREAD_PROBE=n fix it?
Yes and no. The BUG no longer occurs, but either ipw2200 or
NetworkManager is still not working. I am running Fedora development
(rawhide). For some reason, NM still cannot establish a connection
with this kernel build (this failed with 2.6.18-mm2 previously, but I
thought it was related to the BUG). "iwlist scan" can corrently
detect my access point. Also, I can use iwconfig and dhclient to
establish a working connection. NM fails with this output in the
message log (I'll try getting a more detailed debug log out of NM):
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) started...
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 1 of 5 (Device Prepare) started...
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 2 of 5 (Device Configure) scheduled...
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 1 of 5 (Device Prepare) complete.
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 2 of 5 (Device Configure) starting...
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0/wireless): access point 'linksys' is unencrypted, no key needed.
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'INTERFACE_ADD eth0 wext
/var/run/wpa_supplicant '
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was 'OK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'AP_SCAN 1'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was 'OK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'ADD_NETWORK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was '0'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'SET_NETWORK 0 ssid 6c696e6b737973'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was 'OK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'SET_NETWORK 0 key_mgmt NONE'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was 'OK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: sending
command 'ENABLE_NETWORK 0'
Sep 28 21:12:38 hogwarts NetworkManager: <information> SUP: response was 'OK'
Sep 28 21:12:38 hogwarts NetworkManager: <information> Activation
(eth0) Stage 2 of 5 (Device Configure) complete.
Sep 28 21:12:44 hogwarts NetworkManager: <information>
wpa_supplicant(3372): Trying to associate with 00:14:bf:1e:31:9b
(SSID='linksys' freq=0 ssage repeated 13 times
Sep 28 21:12:49 hogwarts NetworkManager: <information>
wpa_supplicant(3372): :bf:1e:31:9b (SSID='linksys' freq=0 MHz)
Sep 28 21:12:49 hogwarts NetworkManager: <information>
wpa_supplicant(3372): Trying to associate with 00:14:bf:1e:31:9b
(SSID='linksys' freq=0 MHz)
Sep 28 21:12:49 hogwarts last message repeated 12 times
Sep 28 21:12:54 hogwarts NetworkManager: <information>
wpa_supplicant(3372): req=0 MHz)
Sep 28 21:12:54 hogwarts NetworkManager: <information>
wpa_supplicant(3372): Trying to associate with 00:14:bf:1e:31:9b
(SSID='linksys' freq=0 MHz)
Sep 28 21:12:54 hogwarts last message repeated 13 times
Sep 28 21:12:58 hogwarts NetworkManager: <information> Activation
(eth0/wireless): association took too long (>20s), failing activation.
Sep 28 21:12:58 hogwarts NetworkManager: <information> Activation
(eth0) failure scheduled...
Sep 28 21:12:58 hogwarts NetworkManager: <information> Activation
(eth0) failed for access point (linksys)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 4:31 ` Miles Lane
@ 2006-09-29 4:49 ` Andrew Morton
2006-09-29 5:04 ` Miles Lane
2006-09-29 23:29 ` Greg KH
0 siblings, 2 replies; 9+ messages in thread
From: Andrew Morton @ 2006-09-29 4:49 UTC (permalink / raw)
To: Miles Lane, Greg KH; +Cc: LKML, James P. Ketrenos, jgarzik
On Thu, 28 Sep 2006 21:31:19 -0700
"Miles Lane" <miles.lane@gmail.com> wrote:
> On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> > On Thu, 28 Sep 2006 19:13:23 -0700
> > "Miles Lane" <miles.lane@gmail.com> wrote:
> >
> > > eth1: RealTek RTL8139 at 0xf9076800, 00:c0:9f:95:18:1b, IRQ 19
> > > eth1: Identified 8139 chip type 'RTL-8100B/8139D'
> > > BUG: unable to handle kernel NULL pointer dereference at virtual
> > > address 000000d0
> > > printing eip:
> > > c11a962e
> > > *pde = 00000000
> > > Oops: 0000 [#1]
> > > PREEMPT
> > > last sysfs file: /class/firmware/0000:01:06.0/loading
> >
> > So you got to the stage of loading firmware.
> >
> > > Modules linked in: shpchp pci_hotplug intel_agp i2c_i801 agpgart
> > > snd_intel8x0 i2c_core snd_intel8x0m snd_ac97_codec snd_ac97_bus
> > > snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
> > > snd_pcm_oss snd_mixer_oss ata_generic ata_piix libata 8139too sdhci
> > > scsi_mod snd_pcm snd_timer psmouse snd soundcore snd_page_alloc 8139cp
> > > mii yenta_socket rsrc_nonstatic pcmcia_core ohci1394 serio_raw ipw2200
> > > ieee1394 ide_cd cdrom rtc unix ehci_hcd ohci_hcd uhci_hcd usbcore ext3
> > > jbd mbcache
> > > CPU: 0
> > > EIP: 0060:[<c11a962e>] Not tainted VLI
> > > EFLAGS: 00010296 (2.6.18-mm2 #8)
> > > EIP is at klist_node_init+0x2b/0x3a
> > > eax: dff16b08 ebx: 000000a0 ecx: c102ebd7 edx: f63a5f44
> > > esi: dff16afc edi: f910e214 ebp: f63a5f88 esp: f63a5f80
> > > ds: 007b es: 007b ss: 0068
> > > Process probe-0000:01:0 (pid: 1697, ti=f63a4000 task=f639c030 task.ti=f63a4000)
> > > Stack: 000000a0 dff16afc f63a5f98 c11a964f dff16a80 dff16afc f63a5fac c1124295
> > > 00000000 dff16a80 f910e214 f63a5fc4 c1124338 f5c17e80 f5c17e80 f633bd90
> > > c11242f0 f63a5fe0 c102a834 ffffffff ffffffff c102a784 00000000 00000000
> > > Call Trace:
> > > [<c11a964f>] klist_add_tail+0x12/0x38
> > > [<c1124295>] device_bind_driver+0x45/0xa0
> > > [<c1124338>] really_probe+0x48/0xb3
> > > [<c102a834>] kthread+0xb0/0xdc
> > > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > > DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
> > >
> > > Leftover inexact backtrace:
> > >
> > > [<c1003f02>] show_trace_log_lvl+0x12/0x25
> > > [<c1003fa1>] show_stack_log_lvl+0x8c/0x97
> > > [<c100412c>] show_registers+0x180/0x214
> > > [<c1004355>] die+0x195/0x2b0
> > > [<c10148a9>] do_page_fault+0x419/0x4e4
> > > [<c11ac329>] error_code+0x39/0x40
> > > [<c11a964f>] klist_add_tail+0x12/0x38
> > > [<c1124295>] device_bind_driver+0x45/0xa0
> > > [<c1124338>] really_probe+0x48/0xb3
> > > [<c102a834>] kthread+0xb0/0xdc
> > > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > > =======================
> > > Code: 55 89 e5 56 53 89 c3 89 d6 8d 42 04 89 42 04 89 40 04 c7 42 10
> > > 00 00 00 00 8d 42 14 e8 f2 14 e8 ff 8d 46 0c e8 80 3d f1 ff 89 1e <8b>
> > > 53 30 85 d2 74 04 89 f0 ff d2 5b 5e 5d c3 55 89 e5 56 53 89
> > > EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
> > > <6>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
> >
> > Does setting CONFIG_PCI_MULTITHREAD_PROBE=n fix it?
>
> Yes and no. The BUG no longer occurs,
OK, thanks. Note to Greg: CONFIG_PCI_MULTITHREAD_PROBE+ipw2200 = oops.
> but either ipw2200 or
> NetworkManager is still not working. I am running Fedora development
> (rawhide). For some reason, NM still cannot establish a connection
> with this kernel build (this failed with 2.6.18-mm2 previously, but I
> thought it was related to the BUG). "iwlist scan" can corrently
> detect my access point. Also, I can use iwconfig and dhclient to
> establish a working connection. NM fails with this output in the
> message log (I'll try getting a more detailed debug log out of NM):
Another reporter mentioned that he could only get his wireless to associate
with his AP by using essid "any". But that was a different type of card.
ipw2200 works OK for me, fwiw.
There's a largeish ipw2200 update in mainline now. That'd be worth testing.
It looks like that ipw2200 update was in 2.6.18-mm1 though. Did that work?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 4:49 ` Andrew Morton
@ 2006-09-29 5:04 ` Miles Lane
2006-09-29 5:16 ` Andrew Morton
2006-09-29 23:29 ` Greg KH
1 sibling, 1 reply; 9+ messages in thread
From: Miles Lane @ 2006-09-29 5:04 UTC (permalink / raw)
To: Andrew Morton; +Cc: Greg KH, LKML, James P. Ketrenos, jgarzik
On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> On Thu, 28 Sep 2006 21:31:19 -0700
> "Miles Lane" <miles.lane@gmail.com> wrote:
>
> > On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> > > On Thu, 28 Sep 2006 19:13:23 -0700
> > > "Miles Lane" <miles.lane@gmail.com> wrote:
> > >
> > > > eth1: RealTek RTL8139 at 0xf9076800, 00:c0:9f:95:18:1b, IRQ 19
> > > > eth1: Identified 8139 chip type 'RTL-8100B/8139D'
> > > > BUG: unable to handle kernel NULL pointer dereference at virtual
> > > > address 000000d0
> > > > printing eip:
> > > > c11a962e
> > > > *pde = 00000000
> > > > Oops: 0000 [#1]
> > > > PREEMPT
> > > > last sysfs file: /class/firmware/0000:01:06.0/loading
> > >
> > > So you got to the stage of loading firmware.
> > >
> > > > Modules linked in: shpchp pci_hotplug intel_agp i2c_i801 agpgart
> > > > snd_intel8x0 i2c_core snd_intel8x0m snd_ac97_codec snd_ac97_bus
> > > > snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
> > > > snd_pcm_oss snd_mixer_oss ata_generic ata_piix libata 8139too sdhci
> > > > scsi_mod snd_pcm snd_timer psmouse snd soundcore snd_page_alloc 8139cp
> > > > mii yenta_socket rsrc_nonstatic pcmcia_core ohci1394 serio_raw ipw2200
> > > > ieee1394 ide_cd cdrom rtc unix ehci_hcd ohci_hcd uhci_hcd usbcore ext3
> > > > jbd mbcache
> > > > CPU: 0
> > > > EIP: 0060:[<c11a962e>] Not tainted VLI
> > > > EFLAGS: 00010296 (2.6.18-mm2 #8)
> > > > EIP is at klist_node_init+0x2b/0x3a
> > > > eax: dff16b08 ebx: 000000a0 ecx: c102ebd7 edx: f63a5f44
> > > > esi: dff16afc edi: f910e214 ebp: f63a5f88 esp: f63a5f80
> > > > ds: 007b es: 007b ss: 0068
> > > > Process probe-0000:01:0 (pid: 1697, ti=f63a4000 task=f639c030 task.ti=f63a4000)
> > > > Stack: 000000a0 dff16afc f63a5f98 c11a964f dff16a80 dff16afc f63a5fac c1124295
> > > > 00000000 dff16a80 f910e214 f63a5fc4 c1124338 f5c17e80 f5c17e80 f633bd90
> > > > c11242f0 f63a5fe0 c102a834 ffffffff ffffffff c102a784 00000000 00000000
> > > > Call Trace:
> > > > [<c11a964f>] klist_add_tail+0x12/0x38
> > > > [<c1124295>] device_bind_driver+0x45/0xa0
> > > > [<c1124338>] really_probe+0x48/0xb3
> > > > [<c102a834>] kthread+0xb0/0xdc
> > > > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > > > DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
> > > >
> > > > Leftover inexact backtrace:
> > > >
> > > > [<c1003f02>] show_trace_log_lvl+0x12/0x25
> > > > [<c1003fa1>] show_stack_log_lvl+0x8c/0x97
> > > > [<c100412c>] show_registers+0x180/0x214
> > > > [<c1004355>] die+0x195/0x2b0
> > > > [<c10148a9>] do_page_fault+0x419/0x4e4
> > > > [<c11ac329>] error_code+0x39/0x40
> > > > [<c11a964f>] klist_add_tail+0x12/0x38
> > > > [<c1124295>] device_bind_driver+0x45/0xa0
> > > > [<c1124338>] really_probe+0x48/0xb3
> > > > [<c102a834>] kthread+0xb0/0xdc
> > > > [<c1003abb>] kernel_thread_helper+0x7/0x10
> > > > =======================
> > > > Code: 55 89 e5 56 53 89 c3 89 d6 8d 42 04 89 42 04 89 40 04 c7 42 10
> > > > 00 00 00 00 8d 42 14 e8 f2 14 e8 ff 8d 46 0c e8 80 3d f1 ff 89 1e <8b>
> > > > 53 30 85 d2 74 04 89 f0 ff d2 5b 5e 5d c3 55 89 e5 56 53 89
> > > > EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
> > > > <6>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
> > >
> > > Does setting CONFIG_PCI_MULTITHREAD_PROBE=n fix it?
> >
> > Yes and no. The BUG no longer occurs,
>
> OK, thanks. Note to Greg: CONFIG_PCI_MULTITHREAD_PROBE+ipw2200 = oops.
>
> > but either ipw2200 or
> > NetworkManager is still not working. I am running Fedora development
> > (rawhide). For some reason, NM still cannot establish a connection
> > with this kernel build (this failed with 2.6.18-mm2 previously, but I
> > thought it was related to the BUG). "iwlist scan" can corrently
> > detect my access point. Also, I can use iwconfig and dhclient to
> > establish a working connection. NM fails with this output in the
> > message log (I'll try getting a more detailed debug log out of NM):
>
> Another reporter mentioned that he could only get his wireless to associate
> with his AP by using essid "any". But that was a different type of card.
>
> ipw2200 works OK for me, fwiw.
Shall I send you my .config?
> There's a largeish ipw2200 update in mainline now. That'd be worth testing.
>
> It looks like that ipw2200 update was in 2.6.18-mm1 though. Did that work?
Yes, it did. My main problem with mm1 was the broken CPUFreq, which
is still busted in mm2. I am rebuilding with debugging enabled in the
ipw2200 driver. I'll see if I can capture any useful information when
I try to associate using NM.
Miles
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 5:04 ` Miles Lane
@ 2006-09-29 5:16 ` Andrew Morton
2006-09-29 5:26 ` Miles Lane
2006-09-29 9:58 ` Miles Lane
0 siblings, 2 replies; 9+ messages in thread
From: Andrew Morton @ 2006-09-29 5:16 UTC (permalink / raw)
To: Miles Lane; +Cc: Greg KH, LKML, James P. Ketrenos, jgarzik
On Thu, 28 Sep 2006 22:04:00 -0700
"Miles Lane" <miles.lane@gmail.com> wrote:
> > > but either ipw2200 or
> > > NetworkManager is still not working. I am running Fedora development
> > > (rawhide). For some reason, NM still cannot establish a connection
> > > with this kernel build (this failed with 2.6.18-mm2 previously, but I
> > > thought it was related to the BUG). "iwlist scan" can corrently
> > > detect my access point. Also, I can use iwconfig and dhclient to
> > > establish a working connection. NM fails with this output in the
> > > message log (I'll try getting a more detailed debug log out of NM):
> >
> > Another reporter mentioned that he could only get his wireless to associate
> > with his AP by using essid "any". But that was a different type of card.
> >
> > ipw2200 works OK for me, fwiw.
>
> Shall I send you my .config?
argh. I'm afraid my head pointer keeps on wrapping past my tail pointer
recently.
But what the heck, yes please. I'm sure James will appreciate it ;)
> > There's a largeish ipw2200 update in mainline now. That'd be worth testing.
> >
> > It looks like that ipw2200 update was in 2.6.18-mm1 though. Did that work?
>
> Yes, it did. My main problem with mm1 was the broken CPUFreq, which
> is still busted in mm2.
Oh. Is anyone looking into that?
> I am rebuilding with debugging enabled in the
> ipw2200 driver. I'll see if I can capture any useful information when
> I try to associate using NM.
Testing mainline would be useful.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 5:16 ` Andrew Morton
@ 2006-09-29 5:26 ` Miles Lane
2006-09-29 9:58 ` Miles Lane
1 sibling, 0 replies; 9+ messages in thread
From: Miles Lane @ 2006-09-29 5:26 UTC (permalink / raw)
To: Andrew Morton; +Cc: Greg KH, LKML, James P. Ketrenos, jgarzik
On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> On Thu, 28 Sep 2006 22:04:00 -0700
> "Miles Lane" <miles.lane@gmail.com> wrote:
>
> > > > but either ipw2200 or
> > > > NetworkManager is still not working. I am running Fedora development
> > > > (rawhide). For some reason, NM still cannot establish a connection
> > > > with this kernel build (this failed with 2.6.18-mm2 previously, but I
> > > > thought it was related to the BUG). "iwlist scan" can corrently
> > > > detect my access point. Also, I can use iwconfig and dhclient to
> > > > establish a working connection. NM fails with this output in the
> > > > message log (I'll try getting a more detailed debug log out of NM):
> > >
> > > Another reporter mentioned that he could only get his wireless to associate
> > > with his AP by using essid "any". But that was a different type of card.
> > >
> > > ipw2200 works OK for me, fwiw.
> >
> > Shall I send you my .config?
>
> argh. I'm afraid my head pointer keeps on wrapping past my tail pointer
> recently.
>
> But what the heck, yes please. I'm sure James will appreciate it ;)
Okay, I'll send it directly.
> > > There's a largeish ipw2200 update in mainline now. That'd be worth testing.
> > >
> > > It looks like that ipw2200 update was in 2.6.18-mm1 though. Did that work?
> >
> > Yes, it did. My main problem with mm1 was the broken CPUFreq, which
> > is still busted in mm2.
>
> Oh. Is anyone looking into that?
I asked David Jones about it. He said he is in a push to get FC6 out
the door and there are more pressing TODO items.
> > I am rebuilding with debugging enabled in the
> > ipw2200 driver. I'll see if I can capture any useful information when
> > I try to associate using NM.
>
> Testing mainline would be useful.
Will do.
Miles
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 5:16 ` Andrew Morton
2006-09-29 5:26 ` Miles Lane
@ 2006-09-29 9:58 ` Miles Lane
1 sibling, 0 replies; 9+ messages in thread
From: Miles Lane @ 2006-09-29 9:58 UTC (permalink / raw)
To: Andrew Morton; +Cc: Greg KH, LKML, James P. Ketrenos, jgarzik
On 9/28/06, Andrew Morton <akpm@osdl.org> wrote:
> On Thu, 28 Sep 2006 22:04:00 -0700
> "Miles Lane" <miles.lane@gmail.com> wrote:
>
> > > > but either ipw2200 or
> > > > NetworkManager is still not working. I am running Fedora development
> > > > (rawhide). For some reason, NM still cannot establish a connection
> > > > with this kernel build (this failed with 2.6.18-mm2 previously, but I
> > > > thought it was related to the BUG). "iwlist scan" can corrently
> > > > detect my access point. Also, I can use iwconfig and dhclient to
> > > > establish a working connection. NM fails with this output in the
> > > > message log (I'll try getting a more detailed debug log out of NM):
> > >
> > > Another reporter mentioned that he could only get his wireless to associate
> > > with his AP by using essid "any". But that was a different type of card.
> > >
> > > ipw2200 works OK for me, fwiw.
> >
> > Shall I send you my .config?
>
> argh. I'm afraid my head pointer keeps on wrapping past my tail pointer
> recently.
>
> But what the heck, yes please. I'm sure James will appreciate it ;)
>
> > > There's a largeish ipw2200 update in mainline now. That'd be worth testing.
> > >
> > > It looks like that ipw2200 update was in 2.6.18-mm1 though. Did that work?
> >
> > Yes, it did. My main problem with mm1 was the broken CPUFreq, which
> > is still busted in mm2.
>
> Oh. Is anyone looking into that?
>
> > I am rebuilding with debugging enabled in the
> > ipw2200 driver. I'll see if I can capture any useful information when
> > I try to associate using NM.
>
> Testing mainline would be useful.
Bad news,
I tested 2.6.18-git11 tonight. Both Network Manager and CPUFreq
(Speedstep) are busted here as well. I think I'll start trying
changing some build options to try to narrow it down.
Miles
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80
2006-09-29 4:49 ` Andrew Morton
2006-09-29 5:04 ` Miles Lane
@ 2006-09-29 23:29 ` Greg KH
1 sibling, 0 replies; 9+ messages in thread
From: Greg KH @ 2006-09-29 23:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: Miles Lane, LKML, James P. Ketrenos, jgarzik
On Thu, Sep 28, 2006 at 09:49:10PM -0700, Andrew Morton wrote:
> On Thu, 28 Sep 2006 21:31:19 -0700
> "Miles Lane" <miles.lane@gmail.com> wrote:
> > > Does setting CONFIG_PCI_MULTITHREAD_PROBE=n fix it?
> >
> > Yes and no. The BUG no longer occurs,
>
> OK, thanks. Note to Greg: CONFIG_PCI_MULTITHREAD_PROBE+ipw2200 = oops.
Odd, it works for me here.
Hm, but that's not at boot time, I load the module at udev init time.
Miles, are you using this as a module or built into the kernel?
Hm, I'm also running it on a single proc machine, which really does not
show any race conditions in the pci probe logic very well.
Anyone have a dual-core laptop they want to donate to the effort? :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-09-29 23:29 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-29 2:13 2.6.18-mm2 -- EIP: [<c11a962e>] klist_node_init+0x2b/0x3a SS:ESP 0068:f63a5f80 Miles Lane
2006-09-29 3:04 ` Andrew Morton
2006-09-29 4:31 ` Miles Lane
2006-09-29 4:49 ` Andrew Morton
2006-09-29 5:04 ` Miles Lane
2006-09-29 5:16 ` Andrew Morton
2006-09-29 5:26 ` Miles Lane
2006-09-29 9:58 ` Miles Lane
2006-09-29 23:29 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox