pata_marvell and Marvell 88SE6121

pata_marvell and Marvell 88SE6121

[Jose Alberto Reguero]

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with 
Marvell 88SE6121.
I added the PCI ID: 0x6121

        { PCI_DEVICE(0x11AB, 0x6101), },
        { PCI_DEVICE(0x11AB, 0x6145), },
        { PCI_DEVICE(0x11AB, 0x6121), },
        { }     /* terminate list */

But not succes.

Log attached.

Any hints are welcome.
Thanks.

Jose Alberto

[-- Attachment #2: log --]
[-- Type: text/plain, Size: 682 bytes --]

Dec 16 12:22:58 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28
Dec 16 12:22:58 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28
Dec 16 12:22:58 jar kernel: scsi3 : pata_marvell
Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xEC07
Dec 16 12:22:58 jar kernel: scsi4 : pata_marvell
Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xE807

Re: pata_marvell and Marvell 88SE6121

[Alan]

On Sat, 16 Dec 2006 18:41:26 +0100
Jose Alberto Reguero <jareguero@telefonica.net> wrote:

> I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with 
> Marvell 88SE6121.

The 6121 is I believe ahci.

Re: pata_marvell and Marvell 88SE6121

[Jose Alberto Reguero]

[-- Attachment #1: Type: text/plain, Size: 522 bytes --]

El Sábado, 16 de Diciembre de 2006 20:31, Alan escribió:
> On Sat, 16 Dec 2006 18:41:26 +0100
>
> Jose Alberto Reguero <jareguero@telefonica.net> wrote:
> > I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
> > Marvell 88SE6121.
>
> The 6121 is I believe ahci.

So there is no change to make work with pata_marvell ?
I thought that 61xx series was similar.

Do you suggest to try with ahci driver?

I atach new log with kernel 2.6.19 and pata_marvell patch.

Thanks.
Jose Alberto

[-- Attachment #2: log --]
[-- Type: text/plain, Size: 1920 bytes --]

Dec 17 13:07:28 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28
Dec 17 13:07:28 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28
Dec 17 13:07:28 jar kernel: scsi2 : pata_marvell
Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xEC07
Dec 17 13:07:28 jar kernel: scsi3 : pata_marvell
Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:58 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:07:58 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:07:59 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:08:29 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:08:29 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:08:29 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:09:00 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:09:00 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:09:00 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
Dec 17 13:14:30 jar vdr: [3345] connect from 127.0.0.1, port 33449 - accepted

Re: pata_marvell and Marvell 88SE6121

[Jose Alberto Reguero]

El Sábado, 16 de Diciembre de 2006 18:41, Jose Alberto Reguero escribió:
> I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
> Marvell 88SE6121.
> I added the PCI ID: 0x6121
>
>         { PCI_DEVICE(0x11AB, 0x6101), },
>         { PCI_DEVICE(0x11AB, 0x6145), },
>         { PCI_DEVICE(0x11AB, 0x6121), },
>         { }     /* terminate list */
>
> But not succes.
>
It is posible to configure three ports (more than two ports) with this driver?

Thanks.
Jose Alberto