The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>,
	Andrew Morton <akpm@linux-foundation.org>,
	Andi Kleen <ak@suse.de>, Chris Wright <chrisw@sous-sol.org>
Subject: [patch-mm 11/33] x86_64: share hpet.h with i386
Date: Sun, 15 Jul 2007 16:10:52 -0000	[thread overview]
Message-ID: <20070715155541.146257096@inhelltoy.tec.linutronix.de> (raw)
In-Reply-To: 20070715155510.341941668@inhelltoy.tec.linutronix.de

[-- Attachment #1: x86_64-share-hpet-h.patch --]
[-- Type: text/plain, Size: 8118 bytes --]

hpet.h in asm-i386 and asm-x86_64 contain tons of duplicated stuff.
Consolidate into one shared header file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

---
 include/asm-i386/hpet.h   |  124 +++++++++++++++++-----------------------------
 include/asm-x86_64/hpet.h |   61 ----------------------
 2 files changed, 48 insertions(+), 137 deletions(-)

Index: linux-2.6.22-rc6-mm/include/asm-i386/hpet.h
===================================================================
--- linux-2.6.22-rc6-mm.orig/include/asm-i386/hpet.h	2007-07-15 17:26:45.000000000 +0200
+++ linux-2.6.22-rc6-mm/include/asm-i386/hpet.h	2007-07-15 17:48:49.000000000 +0200
@@ -4,112 +4,82 @@
 
 #ifdef CONFIG_HPET_TIMER
 
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/irq.h>
-#include <asm/msr.h>
-#include <asm/delay.h>
-#include <asm/mpspec.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-#include <linux/timex.h>
-
 /*
  * Documentation on HPET can be found at:
  *      http://www.intel.com/ial/home/sp/pcmmspec.htm
  *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
  */
 
-#define HPET_MMAP_SIZE	1024
+#define HPET_MMAP_SIZE		1024
 
-#define HPET_ID		0x000
-#define HPET_PERIOD	0x004
-#define HPET_CFG	0x010
-#define HPET_STATUS	0x020
-#define HPET_COUNTER	0x0f0
-#define HPET_T0_CFG	0x100
-#define HPET_T0_CMP	0x108
-#define HPET_T0_ROUTE	0x110
-#define HPET_T1_CFG	0x120
-#define HPET_T1_CMP	0x128
-#define HPET_T1_ROUTE	0x130
-#define HPET_T2_CFG	0x140
-#define HPET_T2_CMP	0x148
-#define HPET_T2_ROUTE	0x150
-
-#define HPET_ID_LEGSUP	0x00008000
-#define HPET_ID_NUMBER	0x00001f00
-#define HPET_ID_REV	0x000000ff
+#define HPET_ID			0x000
+#define HPET_PERIOD		0x004
+#define HPET_CFG		0x010
+#define HPET_STATUS		0x020
+#define HPET_COUNTER		0x0f0
+#define HPET_T0_CFG		0x100
+#define HPET_T0_CMP		0x108
+#define HPET_T0_ROUTE		0x110
+#define HPET_T1_CFG		0x120
+#define HPET_T1_CMP		0x128
+#define HPET_T1_ROUTE		0x130
+#define HPET_T2_CFG		0x140
+#define HPET_T2_CMP		0x148
+#define HPET_T2_ROUTE		0x150
+
+#define HPET_ID_REV		0x000000ff
+#define HPET_ID_NUMBER		0x00001f00
+#define HPET_ID_64BIT		0x00002000
+#define HPET_ID_LEGSUP		0x00008000
+#define HPET_ID_VENDOR		0xffff0000
 #define	HPET_ID_NUMBER_SHIFT	8
+#define HPET_ID_VENDOR_SHIFT	16
 
-#define HPET_CFG_ENABLE	0x001
-#define HPET_CFG_LEGACY	0x002
+#define HPET_ID_VENDOR_8086	0x8086
+
+#define HPET_CFG_ENABLE		0x001
+#define HPET_CFG_LEGACY		0x002
 #define	HPET_LEGACY_8254	2
 #define	HPET_LEGACY_RTC		8
 
-#define HPET_TN_ENABLE		0x004
-#define HPET_TN_PERIODIC	0x008
-#define HPET_TN_PERIODIC_CAP	0x010
-#define HPET_TN_SETVAL		0x040
-#define HPET_TN_32BIT		0x100
-
-/* Use our own asm for 64 bit multiply/divide */
-#define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) 			\
-		__asm__ __volatile__("mull %2" 				\
-				:"=a" (eax_out), "=d" (edx_out) 	\
-				:"r" (reg_in), "0" (eax_in))
-
-#define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) 		\
-		__asm__ __volatile__("divl %2" 				\
-				:"=a" (eax_out), "=d" (edx_out) 	\
-				:"r" (reg_in), "0" (eax_in), "1" (edx_in))
+#define HPET_TN_LEVEL		0x0002
+#define HPET_TN_ENABLE		0x0004
+#define HPET_TN_PERIODIC	0x0008
+#define HPET_TN_PERIODIC_CAP	0x0010
+#define HPET_TN_64BIT_CAP	0x0020
+#define HPET_TN_SETVAL		0x0040
+#define HPET_TN_32BIT		0x0100
+#define HPET_TN_ROUTE		0x3e00
+#define HPET_TN_FSB		0x4000
+#define HPET_TN_FSB_CAP		0x8000
+#define HPET_TN_ROUTE_SHIFT	9
 
-#define KERNEL_TICK_USEC 	(1000000UL/HZ)	/* tick value in microsec */
 /* Max HPET Period is 10^8 femto sec as in HPET spec */
-#define HPET_MAX_PERIOD (100000000UL)
+#define HPET_MAX_PERIOD		100000000UL
 /*
  * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
  * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
  */
-#define HPET_MIN_PERIOD (100000UL)
-#define HPET_TICK_RATE  (HZ * 100000UL)
+#define HPET_MIN_PERIOD		100000UL
 
-extern unsigned long hpet_address;	/* hpet memory map physical address */
+/* hpet memory map physical address */
+extern unsigned long hpet_address;
 extern int is_hpet_enabled(void);
-
-#ifdef CONFIG_X86_64
-extern unsigned long hpet_tick;	/* hpet clks count per tick */
-extern int hpet_use_timer;
-extern int hpet_rtc_timer_init(void);
 extern int hpet_enable(void);
-extern int is_hpet_capable(void);
-extern int hpet_readl(unsigned long a);
-#else
-extern int hpet_enable(void);
-#endif
 
 #ifdef CONFIG_HPET_EMULATE_RTC
+
+#include <linux/interrupt.h>
+
 extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
 extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
+			       unsigned char sec);
 extern int hpet_set_periodic_freq(unsigned long freq);
 extern int hpet_rtc_dropped_irq(void);
 extern int hpet_rtc_timer_init(void);
 extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+
 #endif /* CONFIG_HPET_EMULATE_RTC */
 
 #else
Index: linux-2.6.22-rc6-mm/include/asm-x86_64/hpet.h
===================================================================
--- linux-2.6.22-rc6-mm.orig/include/asm-x86_64/hpet.h	2007-07-15 17:29:06.000000000 +0200
+++ linux-2.6.22-rc6-mm/include/asm-x86_64/hpet.h	2007-07-15 17:48:54.000000000 +0200
@@ -1,59 +1,10 @@
 #ifndef _ASM_X8664_HPET_H
 #define _ASM_X8664_HPET_H 1
 
-/*
- * Documentation on HPET can be found at:
- *      http://www.intel.com/ial/home/sp/pcmmspec.htm
- *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
- */
-
-#define HPET_MMAP_SIZE	1024
-
-#define HPET_ID		0x000
-#define HPET_PERIOD	0x004
-#define HPET_CFG	0x010
-#define HPET_STATUS	0x020
-#define HPET_COUNTER	0x0f0
-#define HPET_Tn_OFFSET	0x20
-#define HPET_Tn_CFG(n)	 (0x100 + (n) * HPET_Tn_OFFSET)
-#define HPET_Tn_ROUTE(n) (0x104 + (n) * HPET_Tn_OFFSET)
-#define HPET_Tn_CMP(n)	 (0x108 + (n) * HPET_Tn_OFFSET)
-#define HPET_T0_CFG	HPET_Tn_CFG(0)
-#define HPET_T0_CMP	HPET_Tn_CMP(0)
-#define HPET_T1_CFG	HPET_Tn_CFG(1)
-#define HPET_T1_CMP	HPET_Tn_CMP(1)
-
-#define HPET_ID_VENDOR	0xffff0000
-#define HPET_ID_LEGSUP	0x00008000
-#define HPET_ID_64BIT	0x00002000
-#define HPET_ID_NUMBER	0x00001f00
-#define HPET_ID_REV	0x000000ff
-#define	HPET_ID_NUMBER_SHIFT	8
-
-#define HPET_ID_VENDOR_SHIFT	16
-#define HPET_ID_VENDOR_8086	0x8086
-
-#define HPET_CFG_ENABLE	0x001
-#define HPET_CFG_LEGACY	0x002
-#define	HPET_LEGACY_8254	2
-#define	HPET_LEGACY_RTC		8
-
-#define HPET_TN_LEVEL		0x0002
-#define HPET_TN_ENABLE		0x0004
-#define HPET_TN_PERIODIC	0x0008
-#define HPET_TN_PERIODIC_CAP	0x0010
-#define HPET_TN_64BIT_CAP	0x0020
-#define HPET_TN_SETVAL		0x0040
-#define HPET_TN_32BIT		0x0100
-#define HPET_TN_ROUTE		0x3e00
-#define HPET_TN_FSB		0x4000
-#define HPET_TN_FSB_CAP		0x8000
-
-#define HPET_TN_ROUTE_SHIFT	9
+#include <asm-i386/hpet.h>
 
 #define HPET_TICK_RATE (HZ * 100000UL)
 
-extern int is_hpet_enabled(void);
 extern int hpet_rtc_timer_init(void);
 extern int hpet_arch_init(void);
 extern int hpet_timer_stop_set_go(unsigned long tick);
@@ -61,17 +12,7 @@ extern int hpet_reenable(void);
 extern unsigned int hpet_calibrate_tsc(void);
 
 extern int hpet_use_timer;
-extern unsigned long hpet_address;
 extern unsigned long hpet_period;
 extern unsigned long hpet_tick;
 
-#ifdef CONFIG_HPET_EMULATE_RTC
-extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
-extern int hpet_set_periodic_freq(unsigned long freq);
-extern int hpet_rtc_dropped_irq(void);
-extern int hpet_rtc_timer_init(void);
-#endif /* CONFIG_HPET_EMULATE_RTC */
-
 #endif

-- 


  parent reply	other threads:[~2007-07-15 16:09 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-15 16:10 [patch-mm 00/33] x86_64 clock events conversion - V5 Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 01/33] clockevents: Remove unused inline function Thomas Gleixner
2007-07-17 12:33   ` Andi Kleen
2007-07-17 14:58     ` Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 02/33] clockevents: Allow build w/o run-tine usage for migration purposes Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 03/33] i386: remove pit_interrupt_hook Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 04/33] X86_64: hpet tsc calibration fix broken smi detection logic Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 05/33] x86_64: Untangle asm/hpet.h from asm/timex.h Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 06/33] x86_64: use generic cmos update Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 07/33] x86_64: Use generic xtime init Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 08/33] x86_64: Remove dead code and other janitor work in tsc.c Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 09/33] x86_64: Fix APIC typo Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 10/33] x86_64: fiuxp pt_reqs leftovers Thomas Gleixner
2007-07-15 16:10 ` Thomas Gleixner [this message]
2007-07-15 16:10 ` [patch-mm 12/33] x86_64: apic.c coding style janitor work Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 13/33] x86_64: time.c white space wreckage cleanup Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 14/33] x86_64: Consolidate tsc calibration Thomas Gleixner
2007-07-17 12:51   ` Andi Kleen
2007-07-17 15:00     ` Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 15/33] i386: prepare sharing the hpet code with x86_64 Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 16/33] i386: hpet add x8664 bits Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 17/33] i386: prepare sharing the PIT code Thomas Gleixner
2007-07-15 16:10 ` [patch-mm 18/33] x86_64: use shared i8253.h Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 19/33] x86_64: prepare apic code for clock events Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 20/33] x86_64: remove pit synchronization Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 21/33] x86_64: Move apic calibration code around Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 22/33] x86_64: Remove APIC_DIVISOR Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 23/33] x86_64: apic change setup_APIC_timer calling convention Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 24/33] x86_64: remove nested irq disables Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 25/33] x86_64: prepare idle loop for dynamic ticks Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 26/33] x86_64: apic add clock event functions Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 27/33] x86_64: convert to clock events Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 28/33] x86_64: remove now unused code Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 29/33] x86_64: cleanup apic.c after clock events switch Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 30/33] jiffies: remove unused macros Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 31/33] ACPI: remove the now unused ifdef code Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 32/33] i386: Remove the useless #ifdef in i8253.h Thomas Gleixner
2007-07-15 16:11 ` [patch-mm 33/33] i386/x8664: cleanup the shared hpet code Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070715155541.146257096@inhelltoy.tec.linutronix.de \
    --to=tglx@linutronix.de \
    --cc=ak@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=chrisw@sous-sol.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox