* ACPI Problem
@ 2003-04-18 3:26 Julian Blake Kongslie
0 siblings, 0 replies; 5+ messages in thread
From: Julian Blake Kongslie @ 2003-04-18 3:26 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 1321 bytes --]
I asked this a while ago, but I didn't get a fix, and the problem still
exists...
I'm on an IBM Thinkpad a30p laptop, using a 2.5.66 kernel, and I can't
use ACPI. On bootup, ACPI tables are found, but there is a problem in
the ECDT, and ACPI disables itself. Exerpt from my dmesg is attached.
This problem is not in 2.4 (because the ECDT isn't used?), but it is in
kernels as early as 2.5.50. I haven't checked earlier kernels, but I can
if someone honestly thinks that would help.
I've gotten several emails from other people with similar systems, all
IBM laptops, regarding my earlier posts on this problem, asking if I
found a solution. This leads me to believe that it is an incompatability
with the ACPI implementation on IBM laptops. I, personally, am willing
to accept partial functionality because of a broken BIOS, but right now
I get no ACPI support at all, which is really disappointing.
ACPI section of .config is attached.
I can provide any other details that may be needed, and I will gladly
test bogus patches and dangerous fixes ;-) -- IBM gave me an awesome
warranty on this laptop, and I don't mind losing it for a few days if
they need to replace it.
Thanks in advance.
--
-Julian Blake Kongslie
<jblake@omgwallhack.org>
Herre Gud! Jeg har en o/ks i hodet!
[-- Attachment #1.2: dmesg --]
[-- Type: text/plain, Size: 1524 bytes --]
ACPI: Subsystem revision 20030228
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:..................................................................................................................................................................................................................................................................................................................................................................................................
Table [DSDT] - 1259 Objects with 63 Devices 386 Methods 18 Regions
Parsing all Control Methods:
Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions
ACPI Namespace successfully loaded at root c05d8b5c
evxfevnt-0092 [04] acpi_enable : Transition to ACPI mode successful
evgpe-0416 [06] ev_create_gpe_block : GPE Block: 2 registers at 0000000000001028
evgpe-0421 [06] ev_create_gpe_block : GPE Block defined as GPE0 to GPE15
evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L18 is not valid
evgpe-0416 [06] ev_create_gpe_block : GPE Block: 2 registers at 000000000000102C
evgpe-0421 [06] ev_create_gpe_block : GPE Block defined as GPE16 to GPE31
evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L18 is not valid
ACPI: Found ECDT
ACPI: Could not use ECDT
evxfevnt-0137 [06] acpi_disable : ACPI mode disabled
utalloc-0986 [05] ut_dump_allocations : No outstanding allocations.
[-- Attachment #1.3: config --]
[-- Type: text/plain, Size: 670 bytes --]
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* acpi problem
@ 2008-05-29 17:33 De Martino Pasquale
2008-05-29 19:56 ` Rafael J. Wysocki
0 siblings, 1 reply; 5+ messages in thread
From: De Martino Pasquale @ 2008-05-29 17:33 UTC (permalink / raw)
To: linux-kernel
summary of the problem:
with kernel 2.6.25 my acpi does not work whereas with version <= 2.6.24 all works fine.
Full description:
when i run acpi -a this is my output:
No support for device type: battery
No support for device type: ac_adapter
"lsmod | grep acpi" says that the acpi module is not loaded so i've tried
"modprobe acpi" but the output is:
FATAL: Error inserting acpi_cpufreq
(/lib/modules/2.6.25-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko):
Device or resource busy
I've also tried to pass acpi=on option when kernel boots
------------------------------------------------------------------------
ver_linux output:
Linux guevara 2.6.25-2-amd64 #1 SMP Tue May 27 12:45:24 UTC 2008 x86_64
GNU/Linux
Gnu C 4.2.4
Gnu make 3.81
binutils 2.18.0.20080103
util-linux 2.13.1.1
mount 2.13.1.1
module-init-tools 3.4
e2fsprogs 1.40.8
Linux C Library 2.7
Dynamic linker (ldd) 2.7
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 6.10
udev 114
wireless-tools 29
Modules Loaded ipv6 rfcomm l2cap bluetooth ppdev parport_pc lp
parport container sbs sbshc powernow_k8 cpufreq_stats cpufreq_conservative
cpufreq_ondemand cpufreq_powersave cpufreq_userspace dm_snapshot dm_mirror
dm_mod ndiswrapper firewire_sbp2 loop freq_table joydev psmouse k8temp
snd_hda_intel serio_raw pcspkr snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
ricoh_mmc snd sdhci mmc_core soundcore snd_page_alloc i2c_nforce2 i2c_core
video output wmi battery ac button evdev ext3 jbd mbcache sd_mod ide_cd_mod
cdrom sata_nv ata_generic libata scsi_mod dock firewire_ohci firewire_core
crc_itu_t ide_pci_generic forcedeth amd74xx ide_core ehci_hcd ohci_hcd
thermal processor fan
-------------------------------------------------------------------------
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
stepping : 2
cpu MHz : 800.000
cache size : 256 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 1608.88
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
stepping : 2
cpu MHz : 800.000
cache size : 256 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 1608.88
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
----------------------------------------------------------------------
/proc/modules:
ipv6 294120 10 - Live 0xffffffff88349000
rfcomm 46112 0 - Live 0xffffffff8833c000
l2cap 29696 5 rfcomm, Live 0xffffffff88333000
bluetooth 65444 4 rfcomm,l2cap, Live 0xffffffff88322000
ppdev 13832 0 - Live 0xffffffff8831d000
parport_pc 34344 0 - Live 0xffffffff88313000
lp 17540 0 - Live 0xffffffff8830d000
parport 44848 3 ppdev,parport_pc,lp, Live 0xffffffff88301000
container 9600 0 - Live 0xffffffff882fd000
sbs 14336 0 - Live 0xffffffff882f8000
sbshc 11904 1 sbs, Live 0xffffffff882f4000
powernow_k8 19076 1 - Live 0xffffffff882ee000
cpufreq_stats 10528 0 - Live 0xffffffff882ea000
cpufreq_conservative 13320 0 - Live 0xffffffff882e5000
cpufreq_ondemand 13712 1 - Live 0xffffffff882e0000
cpufreq_powersave 6272 0 - Live 0xffffffff882dd000
cpufreq_userspace 9092 0 - Live 0xffffffff882d9000
dm_snapshot 22472 0 - Live 0xffffffff882d2000
dm_mirror 31748 0 - Live 0xffffffff882c9000
dm_mod 68536 2 dm_snapshot,dm_mirror, Live 0xffffffff882b7000
ndiswrapper 226944 0 - Live 0xffffffff8827e000
firewire_sbp2 22808 0 - Live 0xffffffff88277000
loop 23044 0 - Live 0xffffffff88270000
freq_table 9728 3 powernow_k8,cpufreq_stats,cpufreq_ondemand, Live
0xffffffff8826c000
joydev 17664 0 - Live 0xffffffff88266000
psmouse 45724 0 - Live 0xffffffff88259000
k8temp 10624 0 - Live 0xffffffff88255000
snd_hda_intel 414296 1 - Live 0xffffffff881ee000
serio_raw 11652 0 - Live 0xffffffff881ea000
pcspkr 7808 0 - Live 0xffffffff881e7000
snd_pcm_oss 46752 0 - Live 0xffffffff881da000
snd_mixer_oss 21376 1 snd_pcm_oss, Live 0xffffffff881d3000
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss, Live 0xffffffff881bc000
snd_timer 29328 1 snd_pcm, Live 0xffffffff881b3000
ricoh_mmc 8960 0 - Live 0xffffffff881af000
snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live
0xffffffff8819d000
sdhci 22796 0 - Live 0xffffffff88196000
mmc_core 56416 1 sdhci, Live 0xffffffff88187000
soundcore 13088 1 snd, Live 0xffffffff88182000
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm, Live 0xffffffff8817d000
i2c_nforce2 11392 0 - Live 0xffffffff88179000
i2c_core 30752 1 i2c_nforce2, Live 0xffffffff88170000
video 27412 0 - Live 0xffffffff88168000
output 8704 1 video, Live 0xffffffff88164000
wmi 13120 0 - Live 0xffffffff8815f000
battery 14208 0 - Live 0xffffffff8815a000
ac 9344 0 - Live 0xffffffff88156000
button 13856 0 - Live 0xffffffff88151000
evdev 17408 8 - Live 0xffffffff8814b000
ext3 139280 2 - Live 0xffffffff88127000
jbd 55336 1 ext3, Live 0xffffffff88118000
mbcache 13956 1 ext3, Live 0xffffffff88113000
sd_mod 33728 4 - Live 0xffffffff88109000
ide_cd_mod 41504 0 - Live 0xffffffff880fd000
cdrom 39464 1 ide_cd_mod, Live 0xffffffff880f2000
sata_nv 32520 3 - Live 0xffffffff880e9000
ata_generic 13572 0 - Live 0xffffffff880e4000
libata 165808 2 sata_nv,ata_generic, Live 0xffffffff880ba000
scsi_mod 170360 3 firewire_sbp2,sd_mod,libata, Live 0xffffffff8808f000
dock 16288 1 libata, Live 0xffffffff8808a000
firewire_ohci 27908 0 - Live 0xffffffff88082000
firewire_core 45920 2 firewire_sbp2,firewire_ohci, Live 0xffffffff88075000
crc_itu_t 6656 1 firewire_core, Live 0xffffffff88072000
ide_pci_generic 9476 0 [permanent], Live 0xffffffff8806c000
forcedeth 55692 0 - Live 0xffffffff8805b000
amd74xx 13576 0 [permanent], Live 0xffffffff88054000
ide_core 138160 3 ide_cd_mod,ide_pci_generic,amd74xx, Live 0xffffffff88031000
ehci_hcd 40076 0 - Live 0xffffffff88024000
ohci_hcd 28292 0 - Live 0xffffffff8801a000
thermal 26656 0 - Live 0xffffffff88012000
processor 49388 4 powernow_k8,thermal, Live 0xffffffff88004000
fan 10760 0 - Live 0xffffffff88000000
-----------------------------------------------------------------------
/proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:0d.0
01f0-01f7 : 0000:00:0d.0
01f0-01f7 : ide0
0360-0361 : pnp 00:05
0376-0376 : 0000:00:0d.0
0380-0383 : pnp 00:05
03c0-03df : vesafb
03f6-03f6 : 0000:00:0d.0
03f6-03f6 : ide0
04d0-04d1 : pnp 00:05
0cf8-0cff : PCI conf1
1000-107f : pnp 00:04
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1027 : ACPI GPE0_BLK
1080-10ff : pnp 00:04
1400-147f : pnp 00:04
1480-14ff : pnp 00:04
1484-1484 : ACPI PM2_CNT_BLK
1800-187f : pnp 00:04
1880-18ff : pnp 00:04
1d00-1d7f : 0000:00:0a.0
2000-203f : pnp 00:04
3000-303f : 0000:00:0a.1
3000-303f : nForce2_smbus
3040-307f : 0000:00:0a.1
3040-307f : nForce2_smbus
3080-308f : 0000:00:0d.0
3080-3087 : ide0
3090-309f : 0000:00:0e.0
3090-309f : sata_nv
30b0-30b3 : 0000:00:0e.0
30b0-30b3 : sata_nv
30b4-30b7 : 0000:00:0e.0
30b4-30b7 : sata_nv
30b8-30bf : 0000:00:0e.0
30b8-30bf : sata_nv
30c0-30c7 : 0000:00:0e.0
30c0-30c7 : sata_nv
30e0-30e7 : 0000:00:14.0
30e0-30e7 : forcedeth
4000-4fff : PCI Bus #01
-----------------------------------------------------------------------
/proc/iomem:
00000000-0009dbff : System RAM
0009dc00-0009ffff : reserved
000d2000-000fffff : reserved
00100000-3fefffff : System RAM
00200000-00421ffe : Kernel code
00421fff-0051f4f7 : Kernel data
005bf000-0063d2f7 : Kernel bss
3ff00000-3ff14fff : ACPI Tables
3ff15000-3ff7ffff : ACPI Non-volatile Storage
3ff80000-3fffffff : reserved
c0000000-c0003fff : 0000:00:10.1
c0000000-c0003fff : ICH HD audio
c0004000-c0004fff : 0000:00:0b.0
c0004000-c0004fff : ohci_hcd
c0005000-c00050ff : 0000:00:0b.1
c0005000-c00050ff : ehci_hcd
c0006000-c0006fff : 0000:00:0e.0
c0006000-c0006fff : sata_nv
c0008000-c0008fff : 0000:00:14.0
c0008000-c0008fff : forcedeth
c0040000-c007ffff : 0000:00:0a.3
c2000000-c3ffffff : PCI Bus #01
c4000000-c5ffffff : PCI Bus #03
c4000000-c4003fff : 0000:03:00.0
c4000000-c4003fff : ndiswrapper
c6000000-c7ffffff : PCI Bus #05
c6000000-c6ffffff : 0000:05:00.0
c7000000-c7ffffff : 0000:05:00.0
c8000000-c80fffff : PCI Bus #07
c8000000-c80007ff : 0000:07:05.0
c8000000-c80007ff : firewire_ohci
c8000800-c80008ff : 0000:07:05.1
c8000800-c80008ff : sdhc0:slot0
c8000c00-c8000cff : 0000:07:05.2
c8001000-c80010ff : 0000:07:05.3
c8001400-c80014ff : 0000:07:05.4
c8200000-c83fffff : PCI Bus #01
d0000000-dfffffff : PCI Bus #05
d0000000-dfffffff : 0000:05:00.0
d0000000-d3ffffff : vesafb
e0000000-efffffff : reserved
e0000000-e06fffff : PCI MMCONFIG 0
fec00000-fec0ffff : reserved
fec00000-fec00fff : IOAPIC 0
fed00000-fed00fff : pnp 00:01
fed00000-fed003ff : HPET 0
fee00000-fee00fff : Local APIC
fff80000-ffffffff : reserved
-----------------------------------------------------------------------
lspci -vvv:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 400MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 400MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] #00 [00fe]
Capabilities: [fc] #00 [0000]
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c2000000-c3ffffff
Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c4000000-c5ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c6000000-c7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4159
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 800MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1d00 [size=128]
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at c0040000 (32-bit, non-prefetchable) [size=256K]
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 3080 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx, ide-pci-generic, ata_generic
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 30c0 [size=8]
Region 1: I/O ports at 30b4 [size=4]
Region 2: I/O ports at 30b8 [size=8]
Region 3: I/O ports at 30b0 [size=4]
Region 4: I/O ports at 3090 [size=16]
Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, sata_nv, ata_generic
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c8000000-c80fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: Gammagraphx, Inc. Device 0000
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30e0 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
Subsystem: Hewlett-Packard Company Device 1361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [13c] Virtual Channel <?>
Kernel driver in use: ndiswrapper
Kernel modules: ssb
05:00.0 VGA compatible controller: nVidia Corporation GeForce Go 7200 (rev a1)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c7000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at c6000000 (64-bit, non-prefetchable) [size=16M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Kernel modules: nvidiafb
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 7
Region 0: Memory at c8000800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c8000c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
Subsystem: Hewlett-Packard Company Device 30b7
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
--------------------------------------------------------------------------
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00
Type: Direct-Access ANSI SCSI revision: 05
PS: Sorry for my english!
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: acpi problem
2008-05-29 17:33 acpi problem De Martino Pasquale
@ 2008-05-29 19:56 ` Rafael J. Wysocki
2008-06-06 0:12 ` Andrew Morton
2008-06-10 20:29 ` Len Brown
0 siblings, 2 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2008-05-29 19:56 UTC (permalink / raw)
To: De Martino Pasquale; +Cc: linux-kernel, ACPI Devel Maling List, Len Brown
[Added a couple of CCs]
On Thursday, 29 of May 2008, De Martino Pasquale wrote:
> summary of the problem:
> with kernel 2.6.25 my acpi does not work whereas with version <= 2.6.24 all works fine.
>
> Full description:
> when i run acpi -a this is my output:
> No support for device type: battery
> No support for device type: ac_adapter
>
> "lsmod | grep acpi" says that the acpi module is not loaded so i've tried
> "modprobe acpi" but the output is:
> FATAL: Error inserting acpi_cpufreq
> (/lib/modules/2.6.25-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko):
> Device or resource busy
>
> I've also tried to pass acpi=on option when kernel boots
>
> ------------------------------------------------------------------------
>
> ver_linux output:
> Linux guevara 2.6.25-2-amd64 #1 SMP Tue May 27 12:45:24 UTC 2008 x86_64
> GNU/Linux
>
> Gnu C 4.2.4
> Gnu make 3.81
> binutils 2.18.0.20080103
> util-linux 2.13.1.1
> mount 2.13.1.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> Linux C Library 2.7
> Dynamic linker (ldd) 2.7
> Procps 3.2.7
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 6.10
> udev 114
> wireless-tools 29
> Modules Loaded ipv6 rfcomm l2cap bluetooth ppdev parport_pc lp
> parport container sbs sbshc powernow_k8 cpufreq_stats cpufreq_conservative
> cpufreq_ondemand cpufreq_powersave cpufreq_userspace dm_snapshot dm_mirror
> dm_mod ndiswrapper firewire_sbp2 loop freq_table joydev psmouse k8temp
> snd_hda_intel serio_raw pcspkr snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
> ricoh_mmc snd sdhci mmc_core soundcore snd_page_alloc i2c_nforce2 i2c_core
> video output wmi battery ac button evdev ext3 jbd mbcache sd_mod ide_cd_mod
> cdrom sata_nv ata_generic libata scsi_mod dock firewire_ohci firewire_core
> crc_itu_t ide_pci_generic forcedeth amd74xx ide_core ehci_hcd ohci_hcd
> thermal processor fan
>
> -------------------------------------------------------------------------
>
> /proc/cpuinfo:
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
> stepping : 2
> cpu MHz : 800.000
> cache size : 256 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 2
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
> bogomips : 1608.88
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
> stepping : 2
> cpu MHz : 800.000
> cache size : 256 KB
> physical id : 0
> siblings : 2
> core id : 1
> cpu cores : 2
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
> bogomips : 1608.88
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> ----------------------------------------------------------------------
>
> /proc/modules:
> ipv6 294120 10 - Live 0xffffffff88349000
> rfcomm 46112 0 - Live 0xffffffff8833c000
> l2cap 29696 5 rfcomm, Live 0xffffffff88333000
> bluetooth 65444 4 rfcomm,l2cap, Live 0xffffffff88322000
> ppdev 13832 0 - Live 0xffffffff8831d000
> parport_pc 34344 0 - Live 0xffffffff88313000
> lp 17540 0 - Live 0xffffffff8830d000
> parport 44848 3 ppdev,parport_pc,lp, Live 0xffffffff88301000
> container 9600 0 - Live 0xffffffff882fd000
> sbs 14336 0 - Live 0xffffffff882f8000
> sbshc 11904 1 sbs, Live 0xffffffff882f4000
> powernow_k8 19076 1 - Live 0xffffffff882ee000
> cpufreq_stats 10528 0 - Live 0xffffffff882ea000
> cpufreq_conservative 13320 0 - Live 0xffffffff882e5000
> cpufreq_ondemand 13712 1 - Live 0xffffffff882e0000
> cpufreq_powersave 6272 0 - Live 0xffffffff882dd000
> cpufreq_userspace 9092 0 - Live 0xffffffff882d9000
> dm_snapshot 22472 0 - Live 0xffffffff882d2000
> dm_mirror 31748 0 - Live 0xffffffff882c9000
> dm_mod 68536 2 dm_snapshot,dm_mirror, Live 0xffffffff882b7000
> ndiswrapper 226944 0 - Live 0xffffffff8827e000
> firewire_sbp2 22808 0 - Live 0xffffffff88277000
> loop 23044 0 - Live 0xffffffff88270000
> freq_table 9728 3 powernow_k8,cpufreq_stats,cpufreq_ondemand, Live
> 0xffffffff8826c000
> joydev 17664 0 - Live 0xffffffff88266000
> psmouse 45724 0 - Live 0xffffffff88259000
> k8temp 10624 0 - Live 0xffffffff88255000
> snd_hda_intel 414296 1 - Live 0xffffffff881ee000
> serio_raw 11652 0 - Live 0xffffffff881ea000
> pcspkr 7808 0 - Live 0xffffffff881e7000
> snd_pcm_oss 46752 0 - Live 0xffffffff881da000
> snd_mixer_oss 21376 1 snd_pcm_oss, Live 0xffffffff881d3000
> snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss, Live 0xffffffff881bc000
> snd_timer 29328 1 snd_pcm, Live 0xffffffff881b3000
> ricoh_mmc 8960 0 - Live 0xffffffff881af000
> snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live
> 0xffffffff8819d000
> sdhci 22796 0 - Live 0xffffffff88196000
> mmc_core 56416 1 sdhci, Live 0xffffffff88187000
> soundcore 13088 1 snd, Live 0xffffffff88182000
> snd_page_alloc 15120 2 snd_hda_intel,snd_pcm, Live 0xffffffff8817d000
> i2c_nforce2 11392 0 - Live 0xffffffff88179000
> i2c_core 30752 1 i2c_nforce2, Live 0xffffffff88170000
> video 27412 0 - Live 0xffffffff88168000
> output 8704 1 video, Live 0xffffffff88164000
> wmi 13120 0 - Live 0xffffffff8815f000
> battery 14208 0 - Live 0xffffffff8815a000
> ac 9344 0 - Live 0xffffffff88156000
> button 13856 0 - Live 0xffffffff88151000
> evdev 17408 8 - Live 0xffffffff8814b000
> ext3 139280 2 - Live 0xffffffff88127000
> jbd 55336 1 ext3, Live 0xffffffff88118000
> mbcache 13956 1 ext3, Live 0xffffffff88113000
> sd_mod 33728 4 - Live 0xffffffff88109000
> ide_cd_mod 41504 0 - Live 0xffffffff880fd000
> cdrom 39464 1 ide_cd_mod, Live 0xffffffff880f2000
> sata_nv 32520 3 - Live 0xffffffff880e9000
> ata_generic 13572 0 - Live 0xffffffff880e4000
> libata 165808 2 sata_nv,ata_generic, Live 0xffffffff880ba000
> scsi_mod 170360 3 firewire_sbp2,sd_mod,libata, Live 0xffffffff8808f000
> dock 16288 1 libata, Live 0xffffffff8808a000
> firewire_ohci 27908 0 - Live 0xffffffff88082000
> firewire_core 45920 2 firewire_sbp2,firewire_ohci, Live 0xffffffff88075000
> crc_itu_t 6656 1 firewire_core, Live 0xffffffff88072000
> ide_pci_generic 9476 0 [permanent], Live 0xffffffff8806c000
> forcedeth 55692 0 - Live 0xffffffff8805b000
> amd74xx 13576 0 [permanent], Live 0xffffffff88054000
> ide_core 138160 3 ide_cd_mod,ide_pci_generic,amd74xx, Live 0xffffffff88031000
> ehci_hcd 40076 0 - Live 0xffffffff88024000
> ohci_hcd 28292 0 - Live 0xffffffff8801a000
> thermal 26656 0 - Live 0xffffffff88012000
> processor 49388 4 powernow_k8,thermal, Live 0xffffffff88004000
> fan 10760 0 - Live 0xffffffff88000000
>
> -----------------------------------------------------------------------
>
> /proc/ioports:
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:0d.0
> 01f0-01f7 : 0000:00:0d.0
> 01f0-01f7 : ide0
> 0360-0361 : pnp 00:05
> 0376-0376 : 0000:00:0d.0
> 0380-0383 : pnp 00:05
> 03c0-03df : vesafb
> 03f6-03f6 : 0000:00:0d.0
> 03f6-03f6 : ide0
> 04d0-04d1 : pnp 00:05
> 0cf8-0cff : PCI conf1
> 1000-107f : pnp 00:04
> 1000-1003 : ACPI PM1a_EVT_BLK
> 1004-1005 : ACPI PM1a_CNT_BLK
> 1008-100b : ACPI PM_TMR
> 1010-1015 : ACPI CPU throttle
> 1020-1027 : ACPI GPE0_BLK
> 1080-10ff : pnp 00:04
> 1400-147f : pnp 00:04
> 1480-14ff : pnp 00:04
> 1484-1484 : ACPI PM2_CNT_BLK
> 1800-187f : pnp 00:04
> 1880-18ff : pnp 00:04
> 1d00-1d7f : 0000:00:0a.0
> 2000-203f : pnp 00:04
> 3000-303f : 0000:00:0a.1
> 3000-303f : nForce2_smbus
> 3040-307f : 0000:00:0a.1
> 3040-307f : nForce2_smbus
> 3080-308f : 0000:00:0d.0
> 3080-3087 : ide0
> 3090-309f : 0000:00:0e.0
> 3090-309f : sata_nv
> 30b0-30b3 : 0000:00:0e.0
> 30b0-30b3 : sata_nv
> 30b4-30b7 : 0000:00:0e.0
> 30b4-30b7 : sata_nv
> 30b8-30bf : 0000:00:0e.0
> 30b8-30bf : sata_nv
> 30c0-30c7 : 0000:00:0e.0
> 30c0-30c7 : sata_nv
> 30e0-30e7 : 0000:00:14.0
> 30e0-30e7 : forcedeth
> 4000-4fff : PCI Bus #01
>
> -----------------------------------------------------------------------
>
> /proc/iomem:
> 00000000-0009dbff : System RAM
> 0009dc00-0009ffff : reserved
> 000d2000-000fffff : reserved
> 00100000-3fefffff : System RAM
> 00200000-00421ffe : Kernel code
> 00421fff-0051f4f7 : Kernel data
> 005bf000-0063d2f7 : Kernel bss
> 3ff00000-3ff14fff : ACPI Tables
> 3ff15000-3ff7ffff : ACPI Non-volatile Storage
> 3ff80000-3fffffff : reserved
> c0000000-c0003fff : 0000:00:10.1
> c0000000-c0003fff : ICH HD audio
> c0004000-c0004fff : 0000:00:0b.0
> c0004000-c0004fff : ohci_hcd
> c0005000-c00050ff : 0000:00:0b.1
> c0005000-c00050ff : ehci_hcd
> c0006000-c0006fff : 0000:00:0e.0
> c0006000-c0006fff : sata_nv
> c0008000-c0008fff : 0000:00:14.0
> c0008000-c0008fff : forcedeth
> c0040000-c007ffff : 0000:00:0a.3
> c2000000-c3ffffff : PCI Bus #01
> c4000000-c5ffffff : PCI Bus #03
> c4000000-c4003fff : 0000:03:00.0
> c4000000-c4003fff : ndiswrapper
> c6000000-c7ffffff : PCI Bus #05
> c6000000-c6ffffff : 0000:05:00.0
> c7000000-c7ffffff : 0000:05:00.0
> c8000000-c80fffff : PCI Bus #07
> c8000000-c80007ff : 0000:07:05.0
> c8000000-c80007ff : firewire_ohci
> c8000800-c80008ff : 0000:07:05.1
> c8000800-c80008ff : sdhc0:slot0
> c8000c00-c8000cff : 0000:07:05.2
> c8001000-c80010ff : 0000:07:05.3
> c8001400-c80014ff : 0000:07:05.4
> c8200000-c83fffff : PCI Bus #01
> d0000000-dfffffff : PCI Bus #05
> d0000000-dfffffff : 0000:05:00.0
> d0000000-d3ffffff : vesafb
> e0000000-efffffff : reserved
> e0000000-e06fffff : PCI MMCONFIG 0
> fec00000-fec0ffff : reserved
> fec00000-fec00fff : IOAPIC 0
> fed00000-fed00fff : pnp 00:01
> fed00000-fed003ff : HPET 0
> fee00000-fee00fff : Local APIC
> fff80000-ffffffff : reserved
>
> -----------------------------------------------------------------------
>
> lspci -vvv:
> 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 400MHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 400MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] #00 [00fe]
> Capabilities: [fc] #00 [0000]
>
> 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: c2000000-c3ffffff
> Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4149
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c4000000-c5ffffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4151
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c6000000-c7ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4159
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 800MHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 1d00 [size=128]
>
> 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 10
> Region 4: I/O ports at 3040 [size=64]
> Region 5: I/O ports at 3000 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> Kernel modules: i2c-nforce2
>
> 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 10
> Region 0: Memory at c0040000 (32-bit, non-prefetchable) [size=256K]
>
> 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 22
> Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Debug port: BAR=1 offset=0098
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) (prog-if 8a [Master SecP PriP])
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
> Region 4: I/O ports at 3080 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: AMD_IDE
> Kernel modules: amd74xx, ide-pci-generic, ata_generic
>
> 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) (prog-if 85 [Master SecO PriO])
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 23
> Region 0: I/O ports at 30c0 [size=8]
> Region 1: I/O ports at 30b4 [size=4]
> Region 2: I/O ports at 30b8 [size=8]
> Region 3: I/O ports at 30b0 [size=4]
> Region 4: I/O ports at 3090 [size=16]
> Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> Kernel modules: ide-pci-generic, sata_nv, ata_generic
>
> 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c8000000-c80fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
> Capabilities: [b8] Subsystem: Gammagraphx, Inc. Device 0000
> Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin B routed to IRQ 21
> Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 30e0 [size=8]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
> Kernel driver in use: forcedeth
> Kernel modules: forcedeth
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
> Kernel modules: k8temp
>
> 03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
> Subsystem: Hewlett-Packard Company Device 1361
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [13c] Virtual Channel <?>
> Kernel driver in use: ndiswrapper
> Kernel modules: ssb
>
> 05:00.0 VGA compatible controller: nVidia Corporation GeForce Go 7200 (rev a1)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at c7000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at c6000000 (64-bit, non-prefetchable) [size=16M]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [128] Power Budgeting <?>
> Kernel modules: nvidiafb
>
> 07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 1000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME+
> Kernel driver in use: firewire_ohci
> Kernel modules: firewire-ohci
>
> 07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin B routed to IRQ 7
> Region 0: Memory at c8000800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: sdhci
> Kernel modules: sdhci
>
> 07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at c8000c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: ricoh-mmc
> Kernel modules: ricoh_mmc
>
> 07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
> !!! Unknown header type 7f
>
> --------------------------------------------------------------------------
>
> /proc/scsi/scsi:
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00
> Type: Direct-Access ANSI SCSI revision: 05
>
>
> PS: Sorry for my english!
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
"Premature optimization is the root of all evil." - Donald Knuth
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: acpi problem
2008-05-29 19:56 ` Rafael J. Wysocki
@ 2008-06-06 0:12 ` Andrew Morton
2008-06-10 20:29 ` Len Brown
1 sibling, 0 replies; 5+ messages in thread
From: Andrew Morton @ 2008-06-06 0:12 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: paco.dmp, linux-kernel, linux-acpi, lenb
On Thu, 29 May 2008 21:56:08 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> [Added a couple of CCs]
Didn't work out so well, did it?
Please enter this in a report against acpi at bugzilla.kernel.org, thanks.
Don't forget to check the "regression" box :(
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: acpi problem
2008-05-29 19:56 ` Rafael J. Wysocki
2008-06-06 0:12 ` Andrew Morton
@ 2008-06-10 20:29 ` Len Brown
1 sibling, 0 replies; 5+ messages in thread
From: Len Brown @ 2008-06-10 20:29 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: De Martino Pasquale, linux-kernel, ACPI Devel Maling List
> > with kernel 2.6.25 my acpi does not work whereas with version <= 2.6.24 all works fine.
> >
> > Full description:
> > when i run acpi -a this is my output:
> > No support for device type: battery
> > No support for device type: ac_adapter
what do CONFIG_ACPI_BATTERY and CONFIG_ACPI_AC say in your 2.6.24 and
2.6.25 .config files?
> > "lsmod | grep acpi" says that the acpi module is not loaded so i've tried
> > "modprobe acpi" but the output is:
there is no such thing as the "acpi module", so this is normal
> > FATAL: Error inserting acpi_cpufreq
> > (/lib/modules/2.6.25-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko):
> > Device or resource busy
that's normal, since you've got powernow_k8 loaded
> > I've also tried to pass acpi=on option when kernel boots
there is no such option as "acpi=on", so this is also normal.
"dmesg -s64000 |grep -i acpi" will tell you more about what you
just booted, but since you're running the fan and thermal modules,
it is surely on already.
-Len
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-06-10 20:30 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-29 17:33 acpi problem De Martino Pasquale
2008-05-29 19:56 ` Rafael J. Wysocki
2008-06-06 0:12 ` Andrew Morton
2008-06-10 20:29 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2003-04-18 3:26 ACPI Problem Julian Blake Kongslie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox