public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: Michael Ellerman <michael@ellerman.id.au>
Cc: Matthew Wilcox <matthew@wil.cx>,
	Sven Wegener <sven.wegener@stealer.net>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	Jesse Barnes <jbarnes@virtuousgeek.org>
Subject: Re: [patch] PCI: check the return value of device_create_bin_file() in pci_create_bus()
Date: Thu, 7 Aug 2008 14:56:34 +1000	[thread overview]
Message-ID: <20080807045632.GA2018@verge.net.au> (raw)
In-Reply-To: <20080807010615.GB24761@verge.net.au>

Check the return value of device_create_bin_file in pci_create_bus and
unwind if necessary. Don't propagate error to caller, as failure to create
these files shouldn't prevent PCI from being initialised. Instead, just
log a warning.

Cc: Sven Wegener <sven.wegener@stealer.net>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Simon Horman <horms@verge.net.au>

--- 

Tue, 5 Aug 2008 21:14:07 +1000
* Revised the patch to free and NULLify b->legacy_io in
  pci_create_legacy_files() on error.

Wed, 06 Aug 2008 10:49:30 +1000
* Don't propagate error to caller, as failure to create these files
  shouldn't prevent PCI from being initialised.

Thu, 07 Aug 2008 09:28:56 +1000
* Remove spurious return value.
  Amusingly this patch was introducing warnings :-)

Thu, 07 Aug 2008 11:15:32 +1000
* Print a warning if legacy file initialisation fails.

This patch resolves the following warnings:

drivers/pci/probe.c: In function `pci_create_bus':
drivers/pci/probe.c:66: warning: ignoring return value of `device_create_bin_file', declared with attribute warn_unused_result
drivers/pci/probe.c:74: warning: ignoring return value of `device_create_bin_file', declared with attribute warn_unused_result

# ia64-unknown-linux-gnu-gcc --version
ia64-unknown-linux-gnu-gcc (GCC) 3.4.5
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c	2008-08-07 09:08:32.000000000 +1000
+++ linux-2.6/drivers/pci/probe.c	2008-08-07 11:21:31.000000000 +1000
@@ -52,27 +52,49 @@ EXPORT_SYMBOL(no_pci_devices);
  * Some platforms allow access to legacy I/O port and ISA memory space on
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
+ *
+ * On error unwind, but don't propogate the error to the caller
+ * as it is ok to set up the PCI bus without these files.
  */
 static void pci_create_legacy_files(struct pci_bus *b)
 {
+	int error;
+
 	b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
 			       GFP_ATOMIC);
-	if (b->legacy_io) {
-		b->legacy_io->attr.name = "legacy_io";
-		b->legacy_io->size = 0xffff;
-		b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_io->read = pci_read_legacy_io;
-		b->legacy_io->write = pci_write_legacy_io;
-		device_create_bin_file(&b->dev, b->legacy_io);
-
-		/* Allocated above after the legacy_io struct */
-		b->legacy_mem = b->legacy_io + 1;
-		b->legacy_mem->attr.name = "legacy_mem";
-		b->legacy_mem->size = 1024*1024;
-		b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_mem->mmap = pci_mmap_legacy_mem;
-		device_create_bin_file(&b->dev, b->legacy_mem);
-	}
+	if (!b->legacy_io)
+		goto kzalloc_err;
+
+	b->legacy_io->attr.name = "legacy_io";
+	b->legacy_io->size = 0xffff;
+	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_io->read = pci_read_legacy_io;
+	b->legacy_io->write = pci_write_legacy_io;
+	error = device_create_bin_file(&b->dev, b->legacy_io);
+	if (error)
+		goto legacy_io_err;
+
+	/* Allocated above after the legacy_io struct */
+	b->legacy_mem = b->legacy_io + 1;
+	b->legacy_mem->attr.name = "legacy_mem";
+	b->legacy_mem->size = 1024*1024;
+	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_mem->mmap = pci_mmap_legacy_mem;
+	error = device_create_bin_file(&b->dev, b->legacy_mem);
+	if (error)
+		goto legacy_mem_err;
+
+	return;
+
+legacy_mem_err:
+	device_remove_bin_file(&b->dev, b->legacy_io);
+legacy_io_err:
+	kfree(b->legacy_io);
+	b->legacy_io = NULL;
+kzalloc_err:
+	printk(KERN_WARNING "pci: warning: could not create legacy I/O port "
+	       "and ISA memory resources to sysfs\n");
+	return;
 }
 
 void pci_remove_legacy_files(struct pci_bus *b)

  reply	other threads:[~2008-08-07  4:56 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-05 10:16 [patch] PCI: check the return value of device_create_bin_file() in pci_create_bus() Simon Horman
2008-08-05 10:33 ` Michael Ellerman
2008-08-05 10:39 ` Sven Wegener
2008-08-05 11:00   ` Simon Horman
2008-08-05 11:14     ` Simon Horman
2008-08-05 11:28       ` Matthew Wilcox
2008-08-05 12:15         ` Simon Horman
2008-08-05 12:26           ` Matthew Wilcox
2008-08-06  0:57             ` Simon Horman
2008-08-06 13:19               ` Matthew Wilcox
2008-08-06 23:25                 ` Simon Horman
2008-08-06 23:30                   ` Simon Horman
2008-08-07  0:30                     ` Michael Ellerman
2008-08-07  1:06                       ` Simon Horman
2008-08-07  4:56                         ` Simon Horman [this message]
2008-08-07 16:50                           ` Jesse Barnes
2008-08-07 22:59                             ` Simon Horman
2008-08-05 13:21   ` Sven Wegener

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080807045632.GA2018@verge.net.au \
    --to=horms@verge.net.au \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=matthew@wil.cx \
    --cc=michael@ellerman.id.au \
    --cc=sven.wegener@stealer.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox