* [PATCH] doc: Fix broken references to Documentation/x86 files @ 2008-10-03 16:08 Uwe Hermann 2008-10-03 17:30 ` Randy.Dunlap 0 siblings, 1 reply; 6+ messages in thread From: Uwe Hermann @ 2008-10-03 16:08 UTC (permalink / raw) To: linux-kernel; +Cc: mtk.manpages, rdunlap, linux-doc The Documentation/i386 and Documentation/x86_64 directories and their contents have been moved into Documentation/x86. Fix references to those files accordingly. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 5b5aba4..84ae622 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -171,7 +171,7 @@ i2c/ - directory with info about the I2C bus/protocol (2 wire, kHz speed). i2o/ - directory with info about the Linux I2O subsystem. -i386/ +x86/i386/ - directory with info about Linux on Intel 32 bit architecture. ia64/ - directory with info about Linux on Intel 64 bit architecture. @@ -383,7 +383,7 @@ w1/ - directory with documents regarding the 1-wire (w1) subsystem. watchdog/ - how to auto-reboot Linux if it has "fallen and can't get up". ;-) -x86_64/ +x86/x86_64/ - directory with info on Linux support for AMD x86-64 (Hammer) machines. zorro.txt - info on writing drivers for Zorro bus devices found on Amigas. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1150444..5af144c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -100,7 +100,7 @@ parameter is applicable: X86-32 X86-32, aka i386 architecture is enabled. X86-64 X86-64 architecture is enabled. More X86-64 boot options can be found in - Documentation/x86_64/boot-options.txt . + Documentation/x86/x86_64/boot-options.txt . In addition, the following text indicates that the option: @@ -111,10 +111,10 @@ In addition, the following text indicates that the option: Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme -need or coordination with <Documentation/i386/boot.txt>. +need or coordination with <Documentation/x86/i386/boot.txt>. There are also arch-specific kernel-parameters not documented here. -See for example <Documentation/x86_64/boot-options.txt>. +See for example <Documentation/x86/x86_64/boot-options.txt>. Note that ALL kernel parameters listed below are CASE SENSITIVE, and that a trailing = on the name of any parameter states that that parameter will @@ -1187,7 +1187,7 @@ and is between 256 and 4096 characters. It is defined in the file mce [X86-32] Machine Check Exception - mce=option [X86-64] See Documentation/x86_64/boot-options.txt + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt md= [HW] RAID subsystems devices and level See Documentation/md.txt. @@ -1650,7 +1650,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/paride.txt. pirq= [SMP,APIC] Manual mp-table setup - See Documentation/i386/IO-APIC.txt. + See Documentation/x86/i386/IO-APIC.txt. plip= [PPT,NET] Parallel port network link Format: { parport<nr> | timid | 0 } @@ -2231,7 +2231,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/fb/modedb.txt. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/i386/boot.txt and + See Documentation/x86/i386/boot.txt and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 7228369..da86fd5 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -402,7 +402,7 @@ static unsigned long load_bzimage(int fd) void *p = from_guest_phys(0x100000); /* Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/i386/boot.txt) */ + * a Linux boot header (see Documentation/x86/i386/boot.txt) */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index b0c7b6c..1b1512f 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -143,7 +143,7 @@ Non Executable Mappings SMP additional_cpus=NUM Allow NUM more CPUs for hotplug - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) NUMA diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets index d1a985c..33bb566 100644 --- a/Documentation/x86/x86_64/fake-numa-for-cpusets +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets @@ -10,7 +10,7 @@ amount of system memory that are available to a certain class of tasks. For more information on the features of cpusets, see Documentation/cpusets.txt. There are a number of different configurations you can use for your needs. For more information on the numa=fake command line option and its various ways of -configuring fake nodes, see Documentation/x86_64/boot-options.txt. +configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt. For the purposes of this introduction, we'll assume a very primitive NUMA emulation setup of "numa=fake=4*512,". This will split our system memory into Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] doc: Fix broken references to Documentation/x86 files 2008-10-03 16:08 [PATCH] doc: Fix broken references to Documentation/x86 files Uwe Hermann @ 2008-10-03 17:30 ` Randy.Dunlap 2008-10-03 17:58 ` Uwe Hermann 0 siblings, 1 reply; 6+ messages in thread From: Randy.Dunlap @ 2008-10-03 17:30 UTC (permalink / raw) To: Uwe Hermann; +Cc: linux-kernel, mtk.manpages, rdunlap, linux-doc On Fri, 3 Oct 2008, Uwe Hermann wrote: > The Documentation/i386 and Documentation/x86_64 directories and their > contents have been moved into Documentation/x86. Fix references to > those files accordingly. > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > index b0c7b6c..1b1512f 100644 > --- a/Documentation/x86/x86_64/boot-options.txt > +++ b/Documentation/x86/x86_64/boot-options.txt > @@ -143,7 +143,7 @@ Non Executable Mappings > SMP > > additional_cpus=NUM Allow NUM more CPUs for hotplug > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) This file needs one more line patched. It still contains this: pirq=... See Documentation/i386/IO-APIC.txt so change that one also and then you can add Acked-by: Randy Dunlap <rdunlap@xenotime.net> to it if you want to. Thanks. -- ~Randy ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] doc: Fix broken references to Documentation/x86 files 2008-10-03 17:30 ` Randy.Dunlap @ 2008-10-03 17:58 ` Uwe Hermann 2008-10-17 12:42 ` Uwe Hermann 0 siblings, 1 reply; 6+ messages in thread From: Uwe Hermann @ 2008-10-03 17:58 UTC (permalink / raw) To: Randy.Dunlap; +Cc: linux-kernel, mtk.manpages, linux-doc The Documentation/i386 and Documentation/x86_64 directories and their contents have been moved into Documentation/x86. Fix references to those files accordingly. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Randy Dunlap <rdunlap@xenotime.net> diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 5b5aba4..84ae622 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -171,7 +171,7 @@ i2c/ - directory with info about the I2C bus/protocol (2 wire, kHz speed). i2o/ - directory with info about the Linux I2O subsystem. -i386/ +x86/i386/ - directory with info about Linux on Intel 32 bit architecture. ia64/ - directory with info about Linux on Intel 64 bit architecture. @@ -383,7 +383,7 @@ w1/ - directory with documents regarding the 1-wire (w1) subsystem. watchdog/ - how to auto-reboot Linux if it has "fallen and can't get up". ;-) -x86_64/ +x86/x86_64/ - directory with info on Linux support for AMD x86-64 (Hammer) machines. zorro.txt - info on writing drivers for Zorro bus devices found on Amigas. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1150444..5af144c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -100,7 +100,7 @@ parameter is applicable: X86-32 X86-32, aka i386 architecture is enabled. X86-64 X86-64 architecture is enabled. More X86-64 boot options can be found in - Documentation/x86_64/boot-options.txt . + Documentation/x86/x86_64/boot-options.txt . In addition, the following text indicates that the option: @@ -111,10 +111,10 @@ In addition, the following text indicates that the option: Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme -need or coordination with <Documentation/i386/boot.txt>. +need or coordination with <Documentation/x86/i386/boot.txt>. There are also arch-specific kernel-parameters not documented here. -See for example <Documentation/x86_64/boot-options.txt>. +See for example <Documentation/x86/x86_64/boot-options.txt>. Note that ALL kernel parameters listed below are CASE SENSITIVE, and that a trailing = on the name of any parameter states that that parameter will @@ -1187,7 +1187,7 @@ and is between 256 and 4096 characters. It is defined in the file mce [X86-32] Machine Check Exception - mce=option [X86-64] See Documentation/x86_64/boot-options.txt + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt md= [HW] RAID subsystems devices and level See Documentation/md.txt. @@ -1650,7 +1650,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/paride.txt. pirq= [SMP,APIC] Manual mp-table setup - See Documentation/i386/IO-APIC.txt. + See Documentation/x86/i386/IO-APIC.txt. plip= [PPT,NET] Parallel port network link Format: { parport<nr> | timid | 0 } @@ -2231,7 +2231,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/fb/modedb.txt. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/i386/boot.txt and + See Documentation/x86/i386/boot.txt and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 7228369..da86fd5 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -402,7 +402,7 @@ static unsigned long load_bzimage(int fd) void *p = from_guest_phys(0x100000); /* Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/i386/boot.txt) */ + * a Linux boot header (see Documentation/x86/i386/boot.txt) */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index b0c7b6c..89a2141 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -35,7 +35,7 @@ APICs nolapic Don't use the local APIC (alias for i386 compatibility) - pirq=... See Documentation/i386/IO-APIC.txt + pirq=... See Documentation/x86/i386/IO-APIC.txt noapictimer Don't set up the APIC timer @@ -143,7 +143,7 @@ Non Executable Mappings SMP additional_cpus=NUM Allow NUM more CPUs for hotplug - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) NUMA diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets index d1a985c..33bb566 100644 --- a/Documentation/x86/x86_64/fake-numa-for-cpusets +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets @@ -10,7 +10,7 @@ amount of system memory that are available to a certain class of tasks. For more information on the features of cpusets, see Documentation/cpusets.txt. There are a number of different configurations you can use for your needs. For more information on the numa=fake command line option and its various ways of -configuring fake nodes, see Documentation/x86_64/boot-options.txt. +configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt. For the purposes of this introduction, we'll assume a very primitive NUMA emulation setup of "numa=fake=4*512,". This will split our system memory into --- On Fri, Oct 03, 2008 at 10:30:33AM -0700, Randy.Dunlap wrote: > On Fri, 3 Oct 2008, Uwe Hermann wrote: > > > The Documentation/i386 and Documentation/x86_64 directories and their > > contents have been moved into Documentation/x86. Fix references to > > those files accordingly. > > > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > > > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > > index b0c7b6c..1b1512f 100644 > > --- a/Documentation/x86/x86_64/boot-options.txt > > +++ b/Documentation/x86/x86_64/boot-options.txt > > @@ -143,7 +143,7 @@ Non Executable Mappings > > SMP > > > > additional_cpus=NUM Allow NUM more CPUs for hotplug > > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) > > This file needs one more line patched. It still contains this: > > pirq=... See Documentation/i386/IO-APIC.txt > > so change that one also and then you can add > Acked-by: Randy Dunlap <rdunlap@xenotime.net> > to it if you want to. Done, thanks. Updated patch above. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] doc: Fix broken references to Documentation/x86 files 2008-10-03 17:58 ` Uwe Hermann @ 2008-10-17 12:42 ` Uwe Hermann 2008-10-17 16:09 ` Randy.Dunlap 0 siblings, 1 reply; 6+ messages in thread From: Uwe Hermann @ 2008-10-17 12:42 UTC (permalink / raw) To: Randy.Dunlap, linux-kernel, mtk.manpages, linux-doc Hi, has this patch been merged into some repository? It doesn't seem to be in Linus' linux-2.6 tree at least. On Fri, Oct 03, 2008 at 07:58:57PM +0200, Uwe Hermann wrote: > The Documentation/i386 and Documentation/x86_64 directories and their > contents have been moved into Documentation/x86. Fix references to > those files accordingly. > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > Acked-by: Randy Dunlap <rdunlap@xenotime.net> > > diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX > index 5b5aba4..84ae622 100644 > --- a/Documentation/00-INDEX > +++ b/Documentation/00-INDEX > @@ -171,7 +171,7 @@ i2c/ > - directory with info about the I2C bus/protocol (2 wire, kHz speed). > i2o/ > - directory with info about the Linux I2O subsystem. > -i386/ > +x86/i386/ > - directory with info about Linux on Intel 32 bit architecture. > ia64/ > - directory with info about Linux on Intel 64 bit architecture. > @@ -383,7 +383,7 @@ w1/ > - directory with documents regarding the 1-wire (w1) subsystem. > watchdog/ > - how to auto-reboot Linux if it has "fallen and can't get up". ;-) > -x86_64/ > +x86/x86_64/ > - directory with info on Linux support for AMD x86-64 (Hammer) machines. > zorro.txt > - info on writing drivers for Zorro bus devices found on Amigas. > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > index 1150444..5af144c 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -100,7 +100,7 @@ parameter is applicable: > X86-32 X86-32, aka i386 architecture is enabled. > X86-64 X86-64 architecture is enabled. > More X86-64 boot options can be found in > - Documentation/x86_64/boot-options.txt . > + Documentation/x86/x86_64/boot-options.txt . > > In addition, the following text indicates that the option: > > @@ -111,10 +111,10 @@ In addition, the following text indicates that the option: > Parameters denoted with BOOT are actually interpreted by the boot > loader, and have no meaning to the kernel directly. > Do not modify the syntax of boot loader parameters without extreme > -need or coordination with <Documentation/i386/boot.txt>. > +need or coordination with <Documentation/x86/i386/boot.txt>. > > There are also arch-specific kernel-parameters not documented here. > -See for example <Documentation/x86_64/boot-options.txt>. > +See for example <Documentation/x86/x86_64/boot-options.txt>. > > Note that ALL kernel parameters listed below are CASE SENSITIVE, and that > a trailing = on the name of any parameter states that that parameter will > @@ -1187,7 +1187,7 @@ and is between 256 and 4096 characters. It is defined in the file > > mce [X86-32] Machine Check Exception > > - mce=option [X86-64] See Documentation/x86_64/boot-options.txt > + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt > > md= [HW] RAID subsystems devices and level > See Documentation/md.txt. > @@ -1650,7 +1650,7 @@ and is between 256 and 4096 characters. It is defined in the file > See Documentation/paride.txt. > > pirq= [SMP,APIC] Manual mp-table setup > - See Documentation/i386/IO-APIC.txt. > + See Documentation/x86/i386/IO-APIC.txt. > > plip= [PPT,NET] Parallel port network link > Format: { parport<nr> | timid | 0 } > @@ -2231,7 +2231,7 @@ and is between 256 and 4096 characters. It is defined in the file > See Documentation/fb/modedb.txt. > > vga= [BOOT,X86-32] Select a particular video mode > - See Documentation/i386/boot.txt and > + See Documentation/x86/i386/boot.txt and > Documentation/svga.txt. > Use vga=ask for menu. > This is actually a boot loader parameter; the value is > diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c > index 7228369..da86fd5 100644 > --- a/Documentation/lguest/lguest.c > +++ b/Documentation/lguest/lguest.c > @@ -402,7 +402,7 @@ static unsigned long load_bzimage(int fd) > void *p = from_guest_phys(0x100000); > > /* Go back to the start of the file and read the header. It should be > - * a Linux boot header (see Documentation/i386/boot.txt) */ > + * a Linux boot header (see Documentation/x86/i386/boot.txt) */ > lseek(fd, 0, SEEK_SET); > read(fd, &boot, sizeof(boot)); > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > index b0c7b6c..89a2141 100644 > --- a/Documentation/x86/x86_64/boot-options.txt > +++ b/Documentation/x86/x86_64/boot-options.txt > @@ -35,7 +35,7 @@ APICs > > nolapic Don't use the local APIC (alias for i386 compatibility) > > - pirq=... See Documentation/i386/IO-APIC.txt > + pirq=... See Documentation/x86/i386/IO-APIC.txt > > noapictimer Don't set up the APIC timer > > @@ -143,7 +143,7 @@ Non Executable Mappings > SMP > > additional_cpus=NUM Allow NUM more CPUs for hotplug > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) > > NUMA > > diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets > index d1a985c..33bb566 100644 > --- a/Documentation/x86/x86_64/fake-numa-for-cpusets > +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets > @@ -10,7 +10,7 @@ amount of system memory that are available to a certain class of tasks. > For more information on the features of cpusets, see Documentation/cpusets.txt. > There are a number of different configurations you can use for your needs. For > more information on the numa=fake command line option and its various ways of > -configuring fake nodes, see Documentation/x86_64/boot-options.txt. > +configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt. > > For the purposes of this introduction, we'll assume a very primitive NUMA > emulation setup of "numa=fake=4*512,". This will split our system memory into > > > --- > > On Fri, Oct 03, 2008 at 10:30:33AM -0700, Randy.Dunlap wrote: > > On Fri, 3 Oct 2008, Uwe Hermann wrote: > > > > > The Documentation/i386 and Documentation/x86_64 directories and their > > > contents have been moved into Documentation/x86. Fix references to > > > those files accordingly. > > > > > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > > > > > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > > > index b0c7b6c..1b1512f 100644 > > > --- a/Documentation/x86/x86_64/boot-options.txt > > > +++ b/Documentation/x86/x86_64/boot-options.txt > > > @@ -143,7 +143,7 @@ Non Executable Mappings > > > SMP > > > > > > additional_cpus=NUM Allow NUM more CPUs for hotplug > > > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > > > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) > > > > This file needs one more line patched. It still contains this: > > > > pirq=... See Documentation/i386/IO-APIC.txt > > > > so change that one also and then you can add > > Acked-by: Randy Dunlap <rdunlap@xenotime.net> > > to it if you want to. > > Done, thanks. Updated patch above. > > > Uwe. > -- > http://www.hermann-uwe.de | http://www.holsham-traders.de > http://www.crazy-hacks.org | http://www.unmaintained-free-software.org > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] doc: Fix broken references to Documentation/x86 files 2008-10-17 12:42 ` Uwe Hermann @ 2008-10-17 16:09 ` Randy.Dunlap 2008-10-19 0:52 ` Uwe Hermann 0 siblings, 1 reply; 6+ messages in thread From: Randy.Dunlap @ 2008-10-17 16:09 UTC (permalink / raw) To: Uwe Hermann; +Cc: Randy.Dunlap, linux-kernel, mtk.manpages, linux-doc On Fri, 17 Oct 2008, Uwe Hermann wrote: > Hi, > > has this patch been merged into some repository? It doesn't seem to be > in Linus' linux-2.6 tree at least. Hi, I have it in a quilt patch series with a few other docs patches. I'll send them to Linus this weekend. > On Fri, Oct 03, 2008 at 07:58:57PM +0200, Uwe Hermann wrote: > > The Documentation/i386 and Documentation/x86_64 directories and their > > contents have been moved into Documentation/x86. Fix references to > > those files accordingly. > > > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > > Acked-by: Randy Dunlap <rdunlap@xenotime.net> > > > > diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX > > index 5b5aba4..84ae622 100644 > > --- a/Documentation/00-INDEX > > +++ b/Documentation/00-INDEX > > @@ -171,7 +171,7 @@ i2c/ > > - directory with info about the I2C bus/protocol (2 wire, kHz speed). > > i2o/ > > - directory with info about the Linux I2O subsystem. > > -i386/ > > +x86/i386/ > > - directory with info about Linux on Intel 32 bit architecture. > > ia64/ > > - directory with info about Linux on Intel 64 bit architecture. > > @@ -383,7 +383,7 @@ w1/ > > - directory with documents regarding the 1-wire (w1) subsystem. > > watchdog/ > > - how to auto-reboot Linux if it has "fallen and can't get up". ;-) > > -x86_64/ > > +x86/x86_64/ > > - directory with info on Linux support for AMD x86-64 (Hammer) machines. > > zorro.txt > > - info on writing drivers for Zorro bus devices found on Amigas. > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > > index 1150444..5af144c 100644 > > --- a/Documentation/kernel-parameters.txt > > +++ b/Documentation/kernel-parameters.txt > > @@ -100,7 +100,7 @@ parameter is applicable: > > X86-32 X86-32, aka i386 architecture is enabled. > > X86-64 X86-64 architecture is enabled. > > More X86-64 boot options can be found in > > - Documentation/x86_64/boot-options.txt . > > + Documentation/x86/x86_64/boot-options.txt . > > > > In addition, the following text indicates that the option: > > > > @@ -111,10 +111,10 @@ In addition, the following text indicates that the option: > > Parameters denoted with BOOT are actually interpreted by the boot > > loader, and have no meaning to the kernel directly. > > Do not modify the syntax of boot loader parameters without extreme > > -need or coordination with <Documentation/i386/boot.txt>. > > +need or coordination with <Documentation/x86/i386/boot.txt>. > > > > There are also arch-specific kernel-parameters not documented here. > > -See for example <Documentation/x86_64/boot-options.txt>. > > +See for example <Documentation/x86/x86_64/boot-options.txt>. > > > > Note that ALL kernel parameters listed below are CASE SENSITIVE, and that > > a trailing = on the name of any parameter states that that parameter will > > @@ -1187,7 +1187,7 @@ and is between 256 and 4096 characters. It is defined in the file > > > > mce [X86-32] Machine Check Exception > > > > - mce=option [X86-64] See Documentation/x86_64/boot-options.txt > > + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt > > > > md= [HW] RAID subsystems devices and level > > See Documentation/md.txt. > > @@ -1650,7 +1650,7 @@ and is between 256 and 4096 characters. It is defined in the file > > See Documentation/paride.txt. > > > > pirq= [SMP,APIC] Manual mp-table setup > > - See Documentation/i386/IO-APIC.txt. > > + See Documentation/x86/i386/IO-APIC.txt. > > > > plip= [PPT,NET] Parallel port network link > > Format: { parport<nr> | timid | 0 } > > @@ -2231,7 +2231,7 @@ and is between 256 and 4096 characters. It is defined in the file > > See Documentation/fb/modedb.txt. > > > > vga= [BOOT,X86-32] Select a particular video mode > > - See Documentation/i386/boot.txt and > > + See Documentation/x86/i386/boot.txt and > > Documentation/svga.txt. > > Use vga=ask for menu. > > This is actually a boot loader parameter; the value is > > diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c > > index 7228369..da86fd5 100644 > > --- a/Documentation/lguest/lguest.c > > +++ b/Documentation/lguest/lguest.c > > @@ -402,7 +402,7 @@ static unsigned long load_bzimage(int fd) > > void *p = from_guest_phys(0x100000); > > > > /* Go back to the start of the file and read the header. It should be > > - * a Linux boot header (see Documentation/i386/boot.txt) */ > > + * a Linux boot header (see Documentation/x86/i386/boot.txt) */ > > lseek(fd, 0, SEEK_SET); > > read(fd, &boot, sizeof(boot)); > > > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > > index b0c7b6c..89a2141 100644 > > --- a/Documentation/x86/x86_64/boot-options.txt > > +++ b/Documentation/x86/x86_64/boot-options.txt > > @@ -35,7 +35,7 @@ APICs > > > > nolapic Don't use the local APIC (alias for i386 compatibility) > > > > - pirq=... See Documentation/i386/IO-APIC.txt > > + pirq=... See Documentation/x86/i386/IO-APIC.txt > > > > noapictimer Don't set up the APIC timer > > > > @@ -143,7 +143,7 @@ Non Executable Mappings > > SMP > > > > additional_cpus=NUM Allow NUM more CPUs for hotplug > > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) > > > > NUMA > > > > diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets > > index d1a985c..33bb566 100644 > > --- a/Documentation/x86/x86_64/fake-numa-for-cpusets > > +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets > > @@ -10,7 +10,7 @@ amount of system memory that are available to a certain class of tasks. > > For more information on the features of cpusets, see Documentation/cpusets.txt. > > There are a number of different configurations you can use for your needs. For > > more information on the numa=fake command line option and its various ways of > > -configuring fake nodes, see Documentation/x86_64/boot-options.txt. > > +configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt. > > > > For the purposes of this introduction, we'll assume a very primitive NUMA > > emulation setup of "numa=fake=4*512,". This will split our system memory into > > > > > > --- > > > > On Fri, Oct 03, 2008 at 10:30:33AM -0700, Randy.Dunlap wrote: > > > On Fri, 3 Oct 2008, Uwe Hermann wrote: > > > > > > > The Documentation/i386 and Documentation/x86_64 directories and their > > > > contents have been moved into Documentation/x86. Fix references to > > > > those files accordingly. > > > > > > > > Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> > > > > > > > > diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt > > > > index b0c7b6c..1b1512f 100644 > > > > --- a/Documentation/x86/x86_64/boot-options.txt > > > > +++ b/Documentation/x86/x86_64/boot-options.txt > > > > @@ -143,7 +143,7 @@ Non Executable Mappings > > > > SMP > > > > > > > > additional_cpus=NUM Allow NUM more CPUs for hotplug > > > > - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) > > > > + (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec) > > > > > > This file needs one more line patched. It still contains this: > > > > > > pirq=... See Documentation/i386/IO-APIC.txt > > > > > > so change that one also and then you can add > > > Acked-by: Randy Dunlap <rdunlap@xenotime.net> > > > to it if you want to. > > > > Done, thanks. Updated patch above. > > > > > > Uwe. > > -- -- ~Randy ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] doc: Fix broken references to Documentation/x86 files 2008-10-17 16:09 ` Randy.Dunlap @ 2008-10-19 0:52 ` Uwe Hermann 0 siblings, 0 replies; 6+ messages in thread From: Uwe Hermann @ 2008-10-19 0:52 UTC (permalink / raw) To: Randy.Dunlap; +Cc: linux-kernel, mtk.manpages, linux-doc On Fri, Oct 17, 2008 at 09:09:15AM -0700, Randy.Dunlap wrote: > > has this patch been merged into some repository? It doesn't seem to be > > in Linus' linux-2.6 tree at least. > > Hi, > I have it in a quilt patch series with a few other docs patches. > I'll send them to Linus this weekend. Great, thanks! Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-10-19 0:52 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-10-03 16:08 [PATCH] doc: Fix broken references to Documentation/x86 files Uwe Hermann 2008-10-03 17:30 ` Randy.Dunlap 2008-10-03 17:58 ` Uwe Hermann 2008-10-17 12:42 ` Uwe Hermann 2008-10-17 16:09 ` Randy.Dunlap 2008-10-19 0:52 ` Uwe Hermann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox