The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: David Miller <davem@davemloft.net>
To: benh@kernel.crashing.org
Cc: airlied@linux.ie, dri-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org
Subject: [PATCH]: drm: radeon: Use surface for PCI GART table.
Date: Sat, 14 Feb 2009 01:51:07 -0800 (PST)	[thread overview]
Message-ID: <20090214.015107.127190039.davem@davemloft.net> (raw)


This allocates a physical surface for the PCI GART table, this way no
matter what other surface configurations exist the GART table will
always be seen by the hardware properly.

We encode the file pointer of the virtual surface allocate using a
special cookie value, called PCIGART_FILE_PRIV.  On the last close, we
release that surface.

Just to be doubly safe, we run the pcigart table setup with the main
surface control register clear.

Based upon ideas from David Airlie and Ben Benjamin Herrenschmidt.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index e235778..119e642 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -909,6 +909,46 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on)
 	}
 }
 
+static int radeon_setup_pcigart_surface(drm_radeon_private_t *dev_priv)
+{
+	struct drm_ati_pcigart_info *gart_info = &dev_priv->gart_info;
+	struct radeon_virt_surface *vp;
+	int i;
+
+	for (i = 0; i < RADEON_MAX_SURFACES * 2; i++) {
+		if (!dev_priv->virt_surfaces[i].file_priv ||
+		    dev_priv->virt_surfaces[i].file_priv == PCIGART_FILE_PRIV)
+			break;
+	}
+	if (i >= 2 * RADEON_MAX_SURFACES)
+		return -ENOMEM;
+	vp = &dev_priv->virt_surfaces[i];
+
+	for (i = 0; i < RADEON_MAX_SURFACES; i++) {
+		struct radeon_surface *sp = &dev_priv->surfaces[i];
+		if (sp->refcount)
+			continue;
+
+		vp->surface_index = i;
+		vp->lower = gart_info->bus_addr;
+		vp->upper = vp->lower + gart_info->table_size;
+		vp->flags = 0;
+		vp->file_priv = PCIGART_FILE_PRIV;
+
+		sp->refcount = 1;
+		sp->lower = vp->lower;
+		sp->upper = vp->upper;
+		sp->flags = 0;
+
+		RADEON_WRITE(RADEON_SURFACE0_INFO + 16 * i, sp->flags);
+		RADEON_WRITE(RADEON_SURFACE0_LOWER_BOUND + 16 * i, sp->lower);
+		RADEON_WRITE(RADEON_SURFACE0_UPPER_BOUND + 16 * i, sp->upper);
+		return 0;
+	}
+
+	return -ENOMEM;
+}
+
 static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init,
 			     struct drm_file *file_priv)
 {
@@ -1202,6 +1242,9 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init,
 	} else
 #endif
 	{
+		u32 sctrl;
+		int ret;
+
 		dev_priv->gart_info.table_mask = DMA_BIT_MASK(32);
 		/* if we have an offset set from userspace */
 		if (dev_priv->pcigart_offset_set) {
@@ -1243,12 +1286,25 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init,
 			}
 		}
 
-		if (!drm_ati_pcigart_init(dev, &dev_priv->gart_info)) {
+		sctrl = RADEON_READ(RADEON_SURFACE_CNTL);
+		RADEON_WRITE(RADEON_SURFACE_CNTL, 0);
+		ret = drm_ati_pcigart_init(dev, &dev_priv->gart_info);
+		RADEON_WRITE(RADEON_SURFACE_CNTL, sctrl);
+
+		if (!ret) {
 			DRM_ERROR("failed to init PCI GART!\n");
 			radeon_do_cleanup_cp(dev);
 			return -ENOMEM;
 		}
 
+		ret = radeon_setup_pcigart_surface(dev_priv);
+		if (ret) {
+			DRM_ERROR("failed to setup GART surface!\n");
+			drm_ati_pcigart_cleanup(dev, &dev_priv->gart_info);
+			radeon_do_cleanup_cp(dev);
+			return ret;
+		}
+
 		/* Turn on PCI GART */
 		radeon_set_pcigart(dev_priv, 1);
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 9b60a26..ecfd414 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -217,6 +217,7 @@ struct radeon_virt_surface {
 	u32 upper;
 	u32 flags;
 	struct drm_file *file_priv;
+#define PCIGART_FILE_PRIV	((void *) -1L)
 };
 
 #define RADEON_FLUSH_EMITED	(1 << 0)
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 03fea43..043293a 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -3155,6 +3155,7 @@ void radeon_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
 
 void radeon_driver_lastclose(struct drm_device *dev)
 {
+	radeon_surfaces_release(PCIGART_FILE_PRIV, dev->dev_private);
 	radeon_do_release(dev);
 }
 

             reply	other threads:[~2009-02-14  9:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-14  9:51 David Miller [this message]
2009-02-14  9:59 ` [PATCH]: drm: radeon: Use surface for PCI GART table Michel Dänzer
2009-02-14 10:04   ` David Miller
2009-02-14 11:35     ` Jerome Glisse
2009-02-14 11:41       ` Dave Airlie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090214.015107.127190039.davem@davemloft.net \
    --to=davem@davemloft.net \
    --cc=airlied@linux.ie \
    --cc=benh@kernel.crashing.org \
    --cc=dri-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox