* Sound problem @ 2011-01-04 16:23 Alex Arnautu 2011-01-05 13:51 ` Andy Whitcroft 0 siblings, 1 reply; 4+ messages in thread From: Alex Arnautu @ 2011-01-04 16:23 UTC (permalink / raw) To: Kernel Team; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 359 bytes --] Hello, I'm having problems with sound. I tested 2.6.35-24 generic and 2.6.37-rc8. The problem is that on stable version, I can talk with my friends on GMail or Skype but I can't record sounds with "Sound Recorder". On the testing version I can't even talk on GMail or Skype with my microphone. I atached the dmesg files for 2.6.37-rc8 and 2.6.35-24 generic. [-- Attachment #2: dmesg_stable_2.6.35.txt --] [-- Type: text/plain, Size: 47543 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdd80000 (usable) [ 0.000000] BIOS-e820: 00000000bdd80000 - 00000000bdd8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdd8e000 - 00000000bddd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bddd0000 - 00000000bde00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbdd80 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bdd80000 (usable) [ 0.000000] modified: 00000000bdd80000 - 00000000bdd8e000 (ACPI data) [ 0.000000] modified: 00000000bdd8e000 - 00000000bddd0000 (ACPI NVS) [ 0.000000] modified: 00000000bddd0000 - 00000000bde00000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 375b0000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 009a7000 - 013e6a92 [ 0.000000] Move RAMDISK from 00000000375b0000 - 0000000037fefa91 to 009a7000 - 013e6a91 [ 0.000000] ACPI: RSDP 000fb800 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bdd80100 0005C (v01 A_M_I_ OEMXSDT 07000907 MSFT 00000097) [ 0.000000] ACPI: FACP bdd80290 000F4 (v03 A_M_I_ OEMFACP 07000907 MSFT 00000097) [ 0.000000] ACPI: DSDT bdd80440 072C1 (v01 A1409 A1409000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS bdd8e000 00040 [ 0.000000] ACPI: APIC bdd80390 0006C (v01 A_M_I_ OEMAPIC 07000907 MSFT 00000097) [ 0.000000] ACPI: MCFG bdd80400 0003C (v01 A_M_I_ OEMMCFG 07000907 MSFT 00000097) [ 0.000000] ACPI: OEMB bdd8e040 00089 (v01 A_M_I_ AMI_OEM 07000907 MSFT 00000097) [ 0.000000] ACPI: HPET bdd87710 00038 (v01 A_M_I_ OEMHPET 07000907 MSFT 00000097) [ 0.000000] ACPI: GSCI bdd8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000907 MSFT 00000097) [ 0.000000] ACPI: SSDT bdd90600 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2149MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bdd80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bdd80 [ 0.000000] On node 0 totalpages: 777487 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c13e8200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4300 pages used for memmap [ 0.000000] HighMem zone: 545974 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bde00000 (gap: bde00000:41000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u1048576 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771411 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=b3fe4aaa-27fa-4d76-a757-f357862a44f4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15551680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (51 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a2adc] TEXT DATA BSS [ 0.000000] #3 [00009a3000 - 00009a6220] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009fc00 - 00000f12c0] BIOS reserved [ 0.000000] #7 [00000f1404 - 00000ff780] BIOS reserved [ 0.000000] #8 [00000f12c0 - 00000f1404] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00009a7000 - 00013e7000] NEW RAMDISK [ 0.000000] #13 [00013e7000 - 00013e8000] BOOTMEM [ 0.000000] #14 [00013e8000 - 0002ba8000] BOOTMEM [ 0.000000] #15 [0002ba8000 - 0002ba8004] BOOTMEM [ 0.000000] #16 [0002ba8040 - 0002ba8100] BOOTMEM [ 0.000000] #17 [0002ba8100 - 0002ba8154] BOOTMEM [ 0.000000] #18 [0002ba8180 - 0002bab180] BOOTMEM [ 0.000000] #19 [0002bab180 - 0002bab24c] BOOTMEM [ 0.000000] #20 [0002bab280 - 0002bb7280] BOOTMEM [ 0.000000] #21 [0002bb7280 - 0002bb72a5] BOOTMEM [ 0.000000] #22 [0002bb72c0 - 0002bb72e7] BOOTMEM [ 0.000000] #23 [0002bb7300 - 0002bb7418] BOOTMEM [ 0.000000] #24 [0002bb7440 - 0002bb7480] BOOTMEM [ 0.000000] #25 [0002bb7480 - 0002bb74c0] BOOTMEM [ 0.000000] #26 [0002bb74c0 - 0002bb7500] BOOTMEM [ 0.000000] #27 [0002bb7500 - 0002bb7540] BOOTMEM [ 0.000000] #28 [0002bb7540 - 0002bb7580] BOOTMEM [ 0.000000] #29 [0002bb7580 - 0002bb75c0] BOOTMEM [ 0.000000] #30 [0002bb75c0 - 0002bb7600] BOOTMEM [ 0.000000] #31 [0002bb7600 - 0002bb7640] BOOTMEM [ 0.000000] #32 [0002bb7640 - 0002bb7680] BOOTMEM [ 0.000000] #33 [0002bb7680 - 0002bb7690] BOOTMEM [ 0.000000] #34 [0002bb76c0 - 0002bb772a] BOOTMEM [ 0.000000] #35 [0002bb7740 - 0002bb77aa] BOOTMEM [ 0.000000] #36 [0002c00000 - 0002c0e000] BOOTMEM [ 0.000000] #37 [0002d00000 - 0002d0e000] BOOTMEM [ 0.000000] #38 [0002e00000 - 0002e0e000] BOOTMEM [ 0.000000] #39 [0002f00000 - 0002f0e000] BOOTMEM [ 0.000000] #40 [0002bb97c0 - 0002bb97c4] BOOTMEM [ 0.000000] #41 [0002bb9800 - 0002bb9804] BOOTMEM [ 0.000000] #42 [0002bb9840 - 0002bb9850] BOOTMEM [ 0.000000] #43 [0002bb9880 - 0002bb9890] BOOTMEM [ 0.000000] #44 [0002bb98c0 - 0002bb9960] BOOTMEM [ 0.000000] #45 [0002bb9980 - 0002bb99c8] BOOTMEM [ 0.000000] #46 [0002bb9a00 - 0002bbda00] BOOTMEM [ 0.000000] #47 [0002c0e000 - 0002c8e000] BOOTMEM [ 0.000000] #48 [0002bbda00 - 0002bfda00] BOOTMEM [ 0.000000] #49 [0002bb77c0 - 0002bb7a00] BOOTMEM [ 0.000000] #50 [0002f0e000 - 0003de2cc0] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:000bdd80) [ 0.000000] Memory: 3049980k/3110400k available (4931k kernel code, 59968k reserved, 2333k data, 688k init, 2201096k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c5000 ( 688 kB) [ 0.000000] .data : 0xc05d0ebe - 0xc08184e8 (2333 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d0ebe (4931 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2700.510 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5401.02 BogoMIPS (lpj=10802040) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004029] Security Framework initialized [ 0.004044] AppArmor: AppArmor initialized [ 0.004046] Yama: becoming mindful. [ 0.004093] Mount-cache hash table entries: 512 [ 0.004208] Initializing cgroup subsys ns [ 0.004211] Initializing cgroup subsys cpuacct [ 0.004215] Initializing cgroup subsys memory [ 0.004222] Initializing cgroup subsys devices [ 0.004224] Initializing cgroup subsys freezer [ 0.004226] Initializing cgroup subsys net_cls [ 0.004252] CPU: Physical Processor ID: 0 [ 0.004254] CPU: Processor Core ID: 0 [ 0.004257] mce: CPU supports 6 MCE banks [ 0.004264] CPU0: Thermal monitoring enabled (TM2) [ 0.004267] using mwait in idle threads. [ 0.004274] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.004283] ... version: 2 [ 0.004284] ... bit width: 40 [ 0.004285] ... generic registers: 2 [ 0.004287] ... value mask: 000000ffffffffff [ 0.004288] ... max period: 000000007fffffff [ 0.004290] ... fixed-purpose events: 3 [ 0.004291] ... event mask: 0000000700000003 [ 0.008862] ACPI: Core revision 20100428 [ 0.020007] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.020011] ftrace: allocating 21756 entries in 43 pages [ 0.024052] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028307] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068003] CPU0: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz stepping 0a [ 0.072000] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms [ 0.072000] APIC delta adjusted to PM-Timer: 1249997 (1449981) [ 0.072000] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.160012] Brought up 2 CPUs [ 0.160015] Total of 2 processors activated (10800.95 BogoMIPS). [ 0.160513] devtmpfs: initialized [ 0.160777] regulator: core version 0.5 [ 0.160799] Time: 21:25:22 Date: 12/30/10 [ 0.160834] NET: Registered protocol family 16 [ 0.160853] Trying to unpack rootfs image as initramfs... [ 0.160936] EISA bus registered [ 0.160942] ACPI: bus type pci registered [ 0.161005] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.161008] PCI: not using MMCONFIG [ 0.161146] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.161147] PCI: Using configuration type 1 for base access [ 0.168163] bio: create slab <bio-0> at 0 [ 0.169371] ACPI: EC: Look up EC in DSDT [ 0.170881] ACPI: Executed 1 blocks of module-level executable AML code [ 0.178088] ACPI: SSDT bdd90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.178416] ACPI: Dynamic OEM Table Load: [ 0.178419] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.178869] ACPI: SSDT bdd90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.179196] ACPI: Dynamic OEM Table Load: [ 0.179199] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.179598] ACPI: Interpreter enabled [ 0.179603] ACPI: (supports S0 S1 S3 S4 S5) [ 0.179625] ACPI: Using IOAPIC for interrupt routing [ 0.179672] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.181621] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.181624] PCI: Using MMCONFIG for extended config space [ 0.188908] ACPI: No dock devices found. [ 0.188913] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.189054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.189329] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.189331] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.189334] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.189336] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.189338] pci_root PNP0A08:00: host bridge window [mem 0xbde00000-0xefffffff] [ 0.189340] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff] [ 0.189401] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.189407] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189411] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07] [ 0.189444] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.189511] pci 0000:00:1b.0: reg 10: [mem 0xfe9f8000-0xfe9fbfff 64bit] [ 0.189550] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.189553] pci 0000:00:1b.0: PME# disabled [ 0.189614] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.189617] pci 0000:00:1c.0: PME# disabled [ 0.189683] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.189687] pci 0000:00:1c.1: PME# disabled [ 0.189731] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] [ 0.189773] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f] [ 0.189816] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f] [ 0.189859] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f] [ 0.189902] pci 0000:00:1d.7: reg 10: [mem 0xfe9f7c00-0xfe9f7fff] [ 0.189952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.189956] pci 0000:00:1d.7: PME# disabled [ 0.190061] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.190065] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.190068] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.190109] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.190114] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.190120] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.190126] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.190131] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.190165] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] [ 0.190170] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] [ 0.190175] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] [ 0.190180] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] [ 0.190185] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f] [ 0.190207] pci 0000:00:1f.2: PME# supported from D3hot [ 0.190210] pci 0000:00:1f.2: PME# disabled [ 0.190260] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.190264] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.190269] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.190274] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.190344] pci 0000:01:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.190352] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f] [ 0.190408] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.190412] pci 0000:01:00.0: PME# disabled [ 0.190432] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.190441] pci 0000:00:1c.1: PCI bridge to [bus 01-01] [ 0.190445] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.190448] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.190454] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.190515] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.190519] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.190523] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.190528] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.190530] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.190532] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.190534] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.190536] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.190538] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xefffffff] (subtractive decode) [ 0.190540] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode) [ 0.190554] pci_bus 0000:00: on NUMA node 0 [ 0.190558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.190710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.190820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.190873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.199083] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.199182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.199278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.199373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.199469] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.199564] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) [ 0.199661] ACPI: PCI Interrupt Link [LNKG] (IRQs *11) [ 0.199752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 12 14 15) [ 0.199795] HEST: Table is not found! [ 0.199859] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.199868] vgaarb: loaded [ 0.200019] SCSI subsystem initialized [ 0.200094] libata version 3.00 loaded. [ 0.200142] usbcore: registered new interface driver usbfs [ 0.200157] usbcore: registered new interface driver hub [ 0.200181] usbcore: registered new device driver usb [ 0.200284] ACPI: WMI: Mapper loaded [ 0.200286] PCI: Using ACPI for IRQ routing [ 0.200289] PCI: pci_cache_line_size set to 64 bytes [ 0.200347] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.200349] reserve RAM buffer: 00000000bdd80000 - 00000000bfffffff [ 0.200426] NetLabel: Initializing [ 0.200428] NetLabel: domain hash size = 128 [ 0.200429] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.200439] NetLabel: unlabeled traffic allowed by default [ 0.200465] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.200469] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.200473] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.204037] Switching to clocksource tsc [ 0.213028] AppArmor: AppArmor Filesystem Enabled [ 0.213049] pnp: PnP ACPI init [ 0.213068] ACPI: bus type pnp registered [ 0.216397] pnp: PnP ACPI: found 17 devices [ 0.216399] ACPI: ACPI bus type pnp unregistered [ 0.216403] PnPBIOS: Disabled by ACPI PNP [ 0.216416] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.216422] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.216427] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.216429] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.216431] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.216433] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.216435] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.216438] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.216443] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved [ 0.216448] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.216450] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.216454] system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.216459] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.216461] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.216463] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.216466] system 00:10: [mem 0x00100000-0xbddfffff] could not be reserved [ 0.216468] system 00:10: [mem 0xf0000000-0xffffffff] could not be reserved [ 0.252195] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbde00000-0xbdffffff] [ 0.252200] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.252203] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.252206] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.252208] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.252211] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.252215] pci 0000:00:1c.0: bridge window [mem 0xbde00000-0xbdffffff] [ 0.252219] pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.252224] pci 0000:00:1c.1: PCI bridge to [bus 01-01] [ 0.252227] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.252231] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.252235] pci 0000:00:1c.1: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.252240] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.252242] pci 0000:00:1e.0: bridge window [io disabled] [ 0.252246] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.252249] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.252263] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.252270] alloc irq_desc for 16 on node -1 [ 0.252272] alloc kstat_irqs on node -1 [ 0.252278] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.252282] pci 0000:00:1c.0: setting latency timer to 64 [ 0.252290] alloc irq_desc for 17 on node -1 [ 0.252291] alloc kstat_irqs on node -1 [ 0.252294] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.252298] pci 0000:00:1c.1: setting latency timer to 64 [ 0.252304] pci 0000:00:1e.0: setting latency timer to 64 [ 0.252308] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.252310] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.252312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252314] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.252316] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xefffffff] [ 0.252318] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff] [ 0.252319] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.252321] pci_bus 0000:02: resource 1 [mem 0xbde00000-0xbdffffff] [ 0.252323] pci_bus 0000:02: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.252326] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.252327] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.252329] pci_bus 0000:01: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.252332] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.252333] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.252335] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.252337] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.252339] pci_bus 0000:03: resource 8 [mem 0xbde00000-0xefffffff] [ 0.252341] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff] [ 0.252378] NET: Registered protocol family 2 [ 0.252458] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.252676] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.253162] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.253412] TCP: Hash tables configured (established 131072 bind 65536) [ 0.253414] TCP reno registered [ 0.253417] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.253427] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.253522] NET: Registered protocol family 1 [ 0.253543] pci 0000:00:02.0: Boot video device [ 0.253643] PCI: CLS 32 bytes, default 64 [ 0.253830] cpufreq-nforce2: No nForce2 chipset. [ 0.253856] Scanning for low memory corruption every 60 seconds [ 0.253959] audit: initializing netlink socket (disabled) [ 0.253969] type=2000 audit(1293744322.248:1): initialized [ 0.262248] highmem bounce pool size: 64 pages [ 0.262252] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.263419] VFS: Disk quotas dquot_6.5.2 [ 0.263470] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.263949] fuse init (API version 7.14) [ 0.264020] msgmni has been set to 1657 [ 0.264310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.264312] io scheduler noop registered [ 0.264314] io scheduler deadline registered [ 0.264324] io scheduler cfq registered (default) [ 0.264413] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.264444] alloc irq_desc for 40 on node -1 [ 0.264446] alloc kstat_irqs on node -1 [ 0.264455] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.264526] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.264554] alloc irq_desc for 41 on node -1 [ 0.264556] alloc kstat_irqs on node -1 [ 0.264561] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.264642] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.264712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.264789] intel_idle: MWAIT substates: 0x22220 [ 0.264791] intel_idle: does not run on family 6 model 23 [ 0.264874] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.264879] ACPI: Power Button [PWRB] [ 0.264915] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.264918] ACPI: Power Button [PWRF] [ 0.265136] ACPI: acpi_idle registered with cpuidle [ 0.267829] ERST: Table is not found! [ 0.268032] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.268128] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.268494] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.269475] brd: module loaded [ 0.269904] loop: module loaded [ 0.270057] ata_piix 0000:00:1f.1: version 2.13 [ 0.270070] alloc irq_desc for 18 on node -1 [ 0.270071] alloc kstat_irqs on node -1 [ 0.270078] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.270112] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.270195] scsi0 : ata_piix [ 0.270257] scsi1 : ata_piix [ 0.271587] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.271589] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.271607] alloc irq_desc for 22 on node -1 [ 0.271609] alloc kstat_irqs on node -1 [ 0.271612] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.271616] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.271655] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.271699] scsi2 : ata_piix [ 0.271741] scsi3 : ata_piix [ 0.273058] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 22 [ 0.273060] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 22 [ 0.273320] Fixed MDIO Bus: probed [ 0.273346] PPP generic driver version 2.4.2 [ 0.273385] tun: Universal TUN/TAP device driver, 1.6 [ 0.273387] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.273462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.273479] alloc irq_desc for 23 on node -1 [ 0.273481] alloc kstat_irqs on node -1 [ 0.273485] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.273499] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.273502] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.273532] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.273547] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.273557] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.277430] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.277448] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9f7c00 [ 0.279823] isapnp: Scanning for PnP cards... [ 0.291965] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.292089] hub 1-0:1.0: USB hub found [ 0.292093] hub 1-0:1.0: 8 ports detected [ 0.292164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.292177] uhci_hcd: USB Universal Host Controller Interface driver [ 0.292216] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.292223] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.292226] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.292256] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.292279] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.292370] hub 2-0:1.0: USB hub found [ 0.292374] hub 2-0:1.0: 2 ports detected [ 0.292419] alloc irq_desc for 19 on node -1 [ 0.292421] alloc kstat_irqs on node -1 [ 0.292427] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.292431] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.292434] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.292463] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.292492] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 0.292580] hub 3-0:1.0: USB hub found [ 0.292583] hub 3-0:1.0: 2 ports detected [ 0.292628] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.292632] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.292635] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.292665] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.292692] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 0.292784] hub 4-0:1.0: USB hub found [ 0.292787] hub 4-0:1.0: 2 ports detected [ 0.292830] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.292835] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.292838] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.292862] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.292890] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 0.292985] hub 5-0:1.0: USB hub found [ 0.292988] hub 5-0:1.0: 2 ports detected [ 0.293097] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.293099] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.293596] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.293647] mice: PS/2 mouse device common for all mice [ 0.293739] rtc_cmos 00:03: RTC can wake from S4 [ 0.293772] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.293794] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.293882] device-mapper: uevent: version 1.0.3 [ 0.316270] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.329060] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.343870] device-mapper: multipath: version 1.1.1 loaded [ 0.343874] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.351877] EISA: Probing bus 0 at eisa.0 [ 0.351879] EISA: Cannot allocate resource for mainboard [ 0.351881] Cannot allocate resource for EISA slot 1 [ 0.351883] Cannot allocate resource for EISA slot 2 [ 0.351884] Cannot allocate resource for EISA slot 3 [ 0.351886] Cannot allocate resource for EISA slot 4 [ 0.351887] Cannot allocate resource for EISA slot 5 [ 0.351889] Cannot allocate resource for EISA slot 6 [ 0.351890] Cannot allocate resource for EISA slot 7 [ 0.351892] Cannot allocate resource for EISA slot 8 [ 0.351893] EISA: Detected 0 cards. [ 0.367976] cpuidle: using governor ladder [ 0.367978] cpuidle: using governor menu [ 0.368265] TCP cubic registered [ 0.368375] NET: Registered protocol family 10 [ 0.368691] lo: Disabled Privacy Extensions [ 0.368881] NET: Registered protocol family 17 [ 0.369677] Using IPI No-Shortcut mode [ 0.369757] PM: Resume from disk failed. [ 0.369766] registered taskstats version 1 [ 0.369938] Magic number: 6:894:450 [ 0.370013] rtc_cmos 00:03: setting system clock to 2010-12-30 21:25:23 UTC (1293744323) [ 0.370015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.370017] EDD information not available. [ 0.378177] Freeing initrd memory: 10496k freed [ 0.457823] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 [ 0.457936] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 0.457938] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.472166] ata1.00: configured for UDMA/66 [ 0.472267] ata3.00: configured for UDMA/133 [ 0.632740] isapnp: No Plug & Play device found [ 0.634276] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5 [ 0.638573] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.638578] Uniform CD-ROM driver Revision: 3.20 [ 0.638759] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.638816] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.638919] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 0.639002] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.639013] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.639050] sd 2:0:0:0: [sda] Write Protect is off [ 0.639053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.639077] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.639193] sda: sda1 sda2 sda3 < [ 0.659654] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 0.668678] sda5 > sda4 [ 0.680499] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.680513] Freeing unused kernel memory: 688k freed [ 0.680908] Write protecting the kernel text: 4932k [ 0.680941] Write protecting the kernel read-only data: 1980k [ 0.693580] udev[83]: starting version 163 [ 0.761017] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.761033] ATL1E 0000:01:00.0: setting latency timer to 64 [ 1.169622] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 1.169627] EXT4-fs (sda5): write access will be enabled during recovery [ 1.280018] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.475563] usbcore: registered new interface driver hiddev [ 1.475671] usbcore: registered new interface driver usbhid [ 1.475673] usbhid: USB HID core driver [ 1.489403] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 1.489486] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0 [ 1.704516] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.966022] EXT4-fs (sda5): orphan cleanup on readonly fs [ 1.966030] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392511 [ 1.966056] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392510 [ 1.966064] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392509 [ 1.966071] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392498 [ 1.966077] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392497 [ 1.966083] EXT4-fs (sda5): 5 orphan inodes deleted [ 1.966086] EXT4-fs (sda5): recovery complete [ 2.198373] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 20.349465] udev[377]: starting version 163 [ 20.406243] Adding 5999612k swap on /dev/sda4. Priority:-1 extents:1 across:5999612k [ 20.416284] intel_rng: FWH not detected [ 20.442105] leds_ss4200: no LED devices found [ 20.448210] Linux agpgart interface v0.103 [ 20.496083] agpgart-intel 0000:00:00.0: Intel G41 Chipset [ 20.496754] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 20.602473] lp: driver loaded but no devices found [ 20.612909] parport_pc 00:06: reported by Plug and Play ACPI [ 20.613014] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 20.640528] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 20.646778] ppdev: user-space parallel port driver [ 20.662349] cfg80211: Calling CRDA to update world regulatory domain [ 20.697584] cfg80211: World regulatory domain updated: [ 20.697588] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.697590] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.697593] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.697595] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.697596] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.697599] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.708172] lp0: using parport0 (interrupt-driven). [ 20.741306] [drm] Initialized drm 1.1.0 20060810 [ 20.747582] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 20.767137] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.767143] i915 0000:00:02.0: setting latency timer to 64 [ 20.785202] Linux video capture interface: v2.00 [ 20.794679] alloc irq_desc for 42 on node -1 [ 20.794682] alloc kstat_irqs on node -1 [ 20.794691] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 20.794702] [drm] set up 31M of stolen space [ 20.796777] gspca: main v2.9.0 registered [ 20.807625] gspca: probing 093a:2460 [ 20.808738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 20.809653] pac207: Pixart Sensor ID 0x27 Chips ID 0x00 [ 20.809656] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2460) [ 20.811709] input: pac207 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/input/input4 [ 20.811781] gspca: video0 created [ 20.811784] gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 [ 20.811807] usbcore: registered new interface driver pac207 [ 20.811808] pac207: registered [ 20.813250] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 20.813297] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 20.813371] usbcore: registered new interface driver rt2500usb [ 20.853967] type=1400 audit(1293737143.979:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=697 comm="apparmor_parser" [ 20.854024] type=1400 audit(1293737143.979:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser" [ 20.854070] type=1400 audit(1293737143.979:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=697 comm="apparmor_parser" [ 21.011117] type=1400 audit(1293737144.135:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=904 comm="apparmor_parser" [ 21.039829] Console: switching to colour frame buffer device 170x48 [ 21.043061] fb0: inteldrmfb frame buffer device [ 21.043063] drm: registered panic notifier [ 21.043215] Slow work thread pool: Starting up [ 21.057078] Slow work thread pool: Ready [ 21.057113] No ACPI video bus found [ 21.057166] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 21.057204] alloc irq_desc for 21 on node -1 [ 21.057206] alloc kstat_irqs on node -1 [ 21.057214] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 21.057246] alloc irq_desc for 43 on node -1 [ 21.057247] alloc kstat_irqs on node -1 [ 21.057256] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 21.057280] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 21.134634] hda_codec: ALC887: BIOS auto-probing. [ 21.220581] alloc irq_desc for 44 on node -1 [ 21.220585] alloc kstat_irqs on node -1 [ 21.220599] ATL1E 0000:01:00.0: irq 44 for MSI/MSI-X [ 21.220875] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.220906] phy1: Selected rate control algorithm 'minstrel' [ 21.221446] Registered led device: rt73usb-phy1::radio [ 21.221460] Registered led device: rt73usb-phy1::assoc [ 21.221474] Registered led device: rt73usb-phy1::quality [ 21.222074] usbcore: registered new interface driver rt73usb [ 21.227408] type=1400 audit(1293737144.351:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=905 comm="apparmor_parser" [ 21.227521] type=1400 audit(1293737144.351:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=905 comm="apparmor_parser" [ 21.227583] type=1400 audit(1293737144.351:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=905 comm="apparmor_parser" [ 21.394811] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.656975] type=1400 audit(1293737144.783:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=961 comm="apparmor_parser" [ 21.657155] type=1400 audit(1293737144.783:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=961 comm="apparmor_parser" [ 21.724490] type=1400 audit(1293737144.851:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1097 comm="apparmor_parser" [ 24.588818] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.654793] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 25.654796] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 25.654797] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 25.654798] vboxdrv: the usage of hardware performance counters by [ 25.654799] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 25.654803] vboxdrv: Found 2 processor cores. [ 25.655295] vboxdrv: fAsync=0 offMin=0x195 offMax=0x6e8 [ 25.655768] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 25.655770] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001). [ 30.987410] wlan0: authenticate with 00:24:d2:a4:88:40 (try 1) [ 30.988991] wlan0: authenticated [ 30.990457] wlan0: associate with 00:24:d2:a4:88:40 (try 1) [ 30.992342] wlan0: RX AssocResp from 00:24:d2:a4:88:40 (capab=0x401 status=0 aid=1) [ 30.992348] wlan0: associated [ 31.009292] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.477605] lo: Disabled Privacy Extensions [ 41.520016] wlan0: no IPv6 routers present [ 550.156703] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 550.156710] Disabling lock debugging due to kernel taint [ 550.157352] CPU0: Core temperature/speed normal [ 599.988516] Machine check events logged [-- Attachment #3: dmesg_rc8.txt --] [-- Type: text/plain, Size: 46464 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-rc8-custom (root@alexandru-System-Home) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Thu Dec 30 19:42:35 EET 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdd80000 (usable) [ 0.000000] BIOS-e820: 00000000bdd80000 - 00000000bdd8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdd8e000 - 00000000bddd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bddd0000 - 00000000bde00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] DMI: P5G41-M/System Product Name, BIOS 0308 07/07/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbdd80 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000 [ 0.000000] RAMDISK: 3758a000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36b24000 - 37589292 [ 0.000000] Move RAMDISK from 000000003758a000 - 0000000037fef291 to 36b24000 - 37589291 [ 0.000000] ACPI: RSDP 000fb800 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bdd80100 0005C (v01 A_M_I_ OEMXSDT 07000907 MSFT 00000097) [ 0.000000] ACPI: FACP bdd80290 000F4 (v03 A_M_I_ OEMFACP 07000907 MSFT 00000097) [ 0.000000] ACPI: DSDT bdd80440 072C1 (v01 A1409 A1409000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS bdd8e000 00040 [ 0.000000] ACPI: APIC bdd80390 0006C (v01 A_M_I_ OEMAPIC 07000907 MSFT 00000097) [ 0.000000] ACPI: MCFG bdd80400 0003C (v01 A_M_I_ OEMMCFG 07000907 MSFT 00000097) [ 0.000000] ACPI: OEMB bdd8e040 00089 (v01 A_M_I_ AMI_OEM 07000907 MSFT 00000097) [ 0.000000] ACPI: HPET bdd87710 00038 (v01 A_M_I_ OEMHPET 07000907 MSFT 00000097) [ 0.000000] ACPI: GSCI bdd8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000907 MSFT 00000097) [ 0.000000] ACPI: SSDT bdd90600 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2149MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bdd80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bdd80 [ 0.000000] On node 0 totalpages: 777487 [ 0.000000] free_area_init_node: node 0, pgdat c0807d00, node_mem_map f5364200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4300 pages used for memmap [ 0.000000] HighMem zone: 545974 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bde00000 (gap: bde00000:41000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4c00000 s28544 r0 d20608 u1048576 [ 0.000000] pcpu-alloc: s28544 r0 d20608 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771411 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-rc8-custom root=UUID=b3fe4aaa-27fa-4d76-a757-f357862a44f4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15551680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bdd80) [ 0.000000] Memory: 3049836k/3110400k available (4993k kernel code, 60112k reserved, 2309k data, 684k init, 2201096k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0822000 - 0xc08cd000 ( 684 kB) [ 0.000000] .data : 0xc05e0696 - 0xc0821e08 (2309 kB) [ 0.000000] .text : 0xc0100000 - 0xc05e0696 (4993 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3808000 soft=f380a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2699.702 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.40 BogoMIPS (lpj=10798808) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004029] Security Framework initialized [ 0.004044] AppArmor: AppArmor initialized [ 0.004090] Mount-cache hash table entries: 512 [ 0.004212] Initializing cgroup subsys ns [ 0.004216] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004218] Initializing cgroup subsys cpuacct [ 0.004222] Initializing cgroup subsys memory [ 0.004230] Initializing cgroup subsys devices [ 0.004232] Initializing cgroup subsys freezer [ 0.004233] Initializing cgroup subsys net_cls [ 0.004263] CPU: Physical Processor ID: 0 [ 0.004264] CPU: Processor Core ID: 0 [ 0.004266] mce: CPU supports 6 MCE banks [ 0.004274] CPU0: Thermal monitoring enabled (TM2) [ 0.004277] using mwait in idle threads. [ 0.004283] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.004291] ... version: 2 [ 0.004292] ... bit width: 40 [ 0.004294] ... generic registers: 2 [ 0.004295] ... value mask: 000000ffffffffff [ 0.004297] ... max period: 000000007fffffff [ 0.004298] ... fixed-purpose events: 3 [ 0.004299] ... event mask: 0000000700000003 [ 0.008936] ACPI: Core revision 20101013 [ 0.020010] ftrace: allocating 20869 entries in 41 pages [ 0.028052] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028356] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071939] CPU0: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz stepping 0a [ 0.072000] CPU 1 irqstacks, hard=f38ac000 soft=f38ae000 [ 0.072000] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.160017] Brought up 2 CPUs [ 0.160019] Total of 2 processors activated (10799.33 BogoMIPS). [ 0.160529] devtmpfs: initialized [ 0.160869] regulator: core version 0.5 [ 0.160903] regulator: dummy: [ 0.160921] Time: 14:31:22 Date: 01/04/11 [ 0.160956] NET: Registered protocol family 16 [ 0.161050] EISA bus registered [ 0.161056] ACPI: bus type pci registered [ 0.161127] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.161129] PCI: not using MMCONFIG [ 0.161257] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.161258] PCI: Using configuration type 1 for base access [ 0.161934] bio: create slab <bio-0> at 0 [ 0.164061] ACPI: EC: Look up EC in DSDT [ 0.165444] ACPI: Executed 1 blocks of module-level executable AML code [ 0.170409] ACPI: SSDT bdd90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.170687] ACPI: Dynamic OEM Table Load: [ 0.170690] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.171093] ACPI: SSDT bdd90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.171372] ACPI: Dynamic OEM Table Load: [ 0.171374] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.171642] ACPI: Interpreter enabled [ 0.171648] ACPI: (supports S0 S1 S3 S4 S5) [ 0.171668] ACPI: Using IOAPIC for interrupt routing [ 0.171696] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.173126] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.173128] PCI: Using MMCONFIG for extended config space [ 0.173836] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 0.178803] ACPI: No dock devices found. [ 0.178807] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.178918] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.179148] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.179150] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.179152] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.179154] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.179156] pci_root PNP0A08:00: host bridge window [mem 0xbde00000-0xefffffff] [ 0.179158] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff] [ 0.179169] pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600 [ 0.179207] pci 0000:00:02.0: [8086:2e32] type 0 class 0x000300 [ 0.179219] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.179226] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.179231] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07] [ 0.179260] pci 0000:00:02.1: [8086:2e33] type 0 class 0x000380 [ 0.179269] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.179332] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.179347] pci 0000:00:1b.0: reg 10: [mem 0xfe9f8000-0xfe9fbfff 64bit] [ 0.179397] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.179401] pci 0000:00:1b.0: PME# disabled [ 0.179418] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.179469] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.179472] pci 0000:00:1c.0: PME# disabled [ 0.179491] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.179542] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.179545] pci 0000:00:1c.1: PME# disabled [ 0.179566] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.179604] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] [ 0.179632] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.179669] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f] [ 0.179695] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.179732] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f] [ 0.179758] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.179795] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f] [ 0.179830] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.179847] pci 0000:00:1d.7: reg 10: [mem 0xfe9f7c00-0xfe9f7fff] [ 0.179912] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.179916] pci 0000:00:1d.7: PME# disabled [ 0.179931] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.179982] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.180059] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.180063] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.180066] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.180097] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.180109] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.180118] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.180126] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.180135] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.180143] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.180175] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.180187] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] [ 0.180195] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] [ 0.180202] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] [ 0.180209] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] [ 0.180217] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f] [ 0.180242] pci 0000:00:1f.2: PME# supported from D3hot [ 0.180246] pci 0000:00:1f.2: PME# disabled [ 0.180291] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.180295] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.180299] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.180304] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.180357] pci 0000:01:00.0: [1969:1026] type 0 class 0x000200 [ 0.180379] pci 0000:01:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.180391] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f] [ 0.180463] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.180468] pci 0000:01:00.0: PME# disabled [ 0.180487] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.180497] pci 0000:00:1c.1: PCI bridge to [bus 01-01] [ 0.180500] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.180504] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.180509] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.180566] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.180569] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.180573] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.180578] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.180580] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.180582] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.180584] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.180586] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.180589] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xefffffff] (subtractive decode) [ 0.180591] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode) [ 0.180604] pci_bus 0000:00: on NUMA node 0 [ 0.180607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.180739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.180820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.180859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.186274] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.186326] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.186377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.186429] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.186478] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.186529] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) [ 0.186579] ACPI: PCI Interrupt Link [LNKG] (IRQs *11) [ 0.186629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 12 14 15) [ 0.186656] HEST: Table is not found! [ 0.186710] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.186719] vgaarb: loaded [ 0.186835] SCSI subsystem initialized [ 0.186843] libata version 3.00 loaded. [ 0.186843] usbcore: registered new interface driver usbfs [ 0.186843] usbcore: registered new interface driver hub [ 0.186843] usbcore: registered new device driver usb [ 0.186843] wmi: Mapper loaded [ 0.186843] PCI: Using ACPI for IRQ routing [ 0.186843] PCI: pci_cache_line_size set to 64 bytes [ 0.186843] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.186843] reserve RAM buffer: 00000000bdd80000 - 00000000bfffffff [ 0.186843] NetLabel: Initializing [ 0.186843] NetLabel: domain hash size = 128 [ 0.186843] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.186843] NetLabel: unlabeled traffic allowed by default [ 0.186843] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.186843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.186843] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.192025] Switching to clocksource tsc [ 0.198176] AppArmor: AppArmor Filesystem Enabled [ 0.198196] pnp: PnP ACPI init [ 0.198221] ACPI: bus type pnp registered [ 0.198381] pnp 00:00: [bus 00-ff] [ 0.198383] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.198385] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.198387] pnp 00:00: [io 0x0d00-0xffff window] [ 0.198389] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.198391] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.198393] pnp 00:00: [mem 0xbde00000-0xefffffff window] [ 0.198395] pnp 00:00: [mem 0xf4000000-0xffffffff window] [ 0.198464] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.198473] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.198518] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.198553] pnp 00:02: [dma 4] [ 0.198554] pnp 00:02: [io 0x0000-0x000f] [ 0.198556] pnp 00:02: [io 0x0081-0x0083] [ 0.198558] pnp 00:02: [io 0x0087] [ 0.198559] pnp 00:02: [io 0x0089-0x008b] [ 0.198561] pnp 00:02: [io 0x008f] [ 0.198563] pnp 00:02: [io 0x00c0-0x00df] [ 0.198589] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.198598] pnp 00:03: [io 0x0070-0x0071] [ 0.198612] pnp 00:03: [irq 8] [ 0.198636] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.198643] pnp 00:04: [io 0x0061] [ 0.198675] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.198683] pnp 00:05: [io 0x00f0-0x00ff] [ 0.198687] pnp 00:05: [irq 13] [ 0.198711] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.199170] pnp 00:06: [irq 7] [ 0.199172] pnp 00:06: [dma 3] [ 0.199174] pnp 00:06: [io 0x0378-0x037f] [ 0.199176] pnp 00:06: [io 0x0778-0x077f] [ 0.199326] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.199358] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.199360] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.199362] pnp 00:07: [io 0x0290-0x0297] [ 0.199398] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.199555] pnp 00:08: [io 0x0010-0x001f] [ 0.199557] pnp 00:08: [io 0x0022-0x003f] [ 0.199559] pnp 00:08: [io 0x0044-0x005f] [ 0.199561] pnp 00:08: [io 0x0062-0x0063] [ 0.199562] pnp 00:08: [io 0x0065-0x006f] [ 0.199564] pnp 00:08: [io 0x0072-0x007f] [ 0.199566] pnp 00:08: [io 0x0080] [ 0.199567] pnp 00:08: [io 0x0084-0x0086] [ 0.199569] pnp 00:08: [io 0x0088] [ 0.199570] pnp 00:08: [io 0x008c-0x008e] [ 0.199572] pnp 00:08: [io 0x0090-0x009f] [ 0.199574] pnp 00:08: [io 0x00a2-0x00bf] [ 0.199575] pnp 00:08: [io 0x00e0-0x00ef] [ 0.199580] pnp 00:08: [io 0x0400-0x041f] [ 0.199581] pnp 00:08: [io 0x04d0-0x04d1] [ 0.199583] pnp 00:08: [io 0x0800-0x087f] [ 0.199585] pnp 00:08: [io 0x0400-0x03ff disabled] [ 0.199587] pnp 00:08: [io 0x0480-0x04bf] [ 0.199588] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] [ 0.199590] pnp 00:08: [mem 0xfed20000-0xfed8ffff] [ 0.199638] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.199709] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.199736] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.199797] pnp 00:0a: [mem 0xffb00000-0xffbfffff] [ 0.199799] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.199835] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.199897] pnp 00:0b: [mem 0xffc00000-0xffefffff] [ 0.199936] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200236] pnp 00:0c: [irq 4] [ 0.200238] pnp 00:0c: [dma 0 disabled] [ 0.200240] pnp 00:0c: [io 0x03f8-0x03ff] [ 0.200296] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.200373] pnp 00:0d: [io 0x0000-0xffffffff disabled] [ 0.200375] pnp 00:0d: [io 0x0000-0xffffffff disabled] [ 0.200377] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.200379] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.200417] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200444] pnp 00:0e: [io 0x0060] [ 0.200446] pnp 00:0e: [io 0x0064] [ 0.200450] pnp 00:0e: [irq 1] [ 0.200478] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.200543] pnp 00:0f: [mem 0xf0000000-0xf3ffffff] [ 0.200582] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200791] pnp 00:10: [mem 0x00000000-0x0009ffff] [ 0.200793] pnp 00:10: [mem 0x000c0000-0x000cffff] [ 0.200795] pnp 00:10: [mem 0x000e0000-0x000fffff] [ 0.200797] pnp 00:10: [mem 0x00100000-0xbddfffff] [ 0.200798] pnp 00:10: [mem 0xf0000000-0xffffffff] [ 0.200844] pnp 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.200979] pnp: PnP ACPI: found 17 devices [ 0.200980] ACPI: ACPI bus type pnp unregistered [ 0.200983] PnPBIOS: Disabled by ACPI PNP [ 0.200995] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.201001] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.201006] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.201008] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.201010] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.201013] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.201015] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.201017] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.201022] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved [ 0.201027] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.201029] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.201033] system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.201038] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.201040] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.201043] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.201045] system 00:10: [mem 0x00100000-0xbddfffff] could not be reserved [ 0.201047] system 00:10: [mem 0xf0000000-0xffffffff] could not be reserved [ 0.237106] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbde00000-0xbdffffff] [ 0.237110] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.237113] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.237115] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.237118] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.237120] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.237125] pci 0000:00:1c.0: bridge window [mem 0xbde00000-0xbdffffff] [ 0.237128] pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.237134] pci 0000:00:1c.1: PCI bridge to [bus 01-01] [ 0.237137] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.237141] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.237144] pci 0000:00:1c.1: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.237150] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.237151] pci 0000:00:1e.0: bridge window [io disabled] [ 0.237155] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.237159] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.237168] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.237177] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.237181] pci 0000:00:1c.0: setting latency timer to 64 [ 0.237188] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.237192] pci 0000:00:1c.1: setting latency timer to 64 [ 0.237197] pci 0000:00:1e.0: setting latency timer to 64 [ 0.237201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.237203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.237205] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.237206] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.237208] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xefffffff] [ 0.237210] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff] [ 0.237212] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.237214] pci_bus 0000:02: resource 1 [mem 0xbde00000-0xbdffffff] [ 0.237216] pci_bus 0000:02: resource 2 [mem 0xbe000000-0xbe1fffff 64bit pref] [ 0.237218] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.237220] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.237222] pci_bus 0000:01: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref] [ 0.237225] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.237226] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.237228] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.237230] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.237232] pci_bus 0000:03: resource 8 [mem 0xbde00000-0xefffffff] [ 0.237234] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff] [ 0.237265] NET: Registered protocol family 2 [ 0.237334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.237547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.238057] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.238272] TCP: Hash tables configured (established 131072 bind 65536) [ 0.238274] TCP reno registered [ 0.238276] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.238284] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.238363] NET: Registered protocol family 1 [ 0.238378] pci 0000:00:02.0: Boot video device [ 0.238472] PCI: CLS 32 bytes, default 64 [ 0.238522] Trying to unpack rootfs image as initramfs... [ 0.448710] Freeing initrd memory: 10648k freed [ 0.453627] cpufreq-nforce2: No nForce2 chipset. [ 0.453658] Scanning for low memory corruption every 60 seconds [ 0.453780] audit: initializing netlink socket (disabled) [ 0.453795] type=2000 audit(1294151482.448:1): initialized [ 0.462095] highmem bounce pool size: 64 pages [ 0.462099] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.463579] VFS: Disk quotas dquot_6.5.2 [ 0.463631] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.464191] fuse init (API version 7.15) [ 0.464269] msgmni has been set to 1678 [ 0.464442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.464444] io scheduler noop registered [ 0.464446] io scheduler deadline registered [ 0.464458] io scheduler cfq registered (default) [ 0.464581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.464601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.464695] intel_idle: MWAIT substates: 0x22220 [ 0.464697] intel_idle: does not run on family 6 model 23 [ 0.464782] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.464788] ACPI: Power Button [PWRB] [ 0.464831] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.464834] ACPI: Power Button [PWRF] [ 0.464977] ACPI: acpi_idle registered with cpuidle [ 0.466954] ERST: Table is not found! [ 0.466968] isapnp: Scanning for PnP cards... [ 0.819812] isapnp: No Plug & Play device found [ 0.819966] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.840290] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.928440] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.949024] brd: module loaded [ 0.949538] loop: module loaded [ 0.949671] ata_piix 0000:00:1f.1: version 2.13 [ 0.949689] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.949720] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.949985] scsi0 : ata_piix [ 0.950055] scsi1 : ata_piix [ 0.951281] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.951283] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.951301] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.951305] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.951340] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.951604] scsi2 : ata_piix [ 0.951658] scsi3 : ata_piix [ 0.952874] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 22 [ 0.952876] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 22 [ 0.953157] Fixed MDIO Bus: probed [ 0.953184] PPP generic driver version 2.4.2 [ 0.953218] tun: Universal TUN/TAP device driver, 1.6 [ 0.953219] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.953286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.953303] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.953312] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.953315] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.953347] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.967803] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.967817] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.971697] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.971709] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9f7c00 [ 0.983778] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.983994] hub 1-0:1.0: USB hub found [ 0.983998] hub 1-0:1.0: 8 ports detected [ 0.984066] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.984075] uhci_hcd: USB Universal Host Controller Interface driver [ 0.984095] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.984100] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.984103] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.984133] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.999782] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.999976] hub 2-0:1.0: USB hub found [ 0.999979] hub 2-0:1.0: 2 ports detected [ 1.000034] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.000039] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.000042] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.000073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.015776] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.015965] hub 3-0:1.0: USB hub found [ 1.015968] hub 3-0:1.0: 2 ports detected [ 1.016023] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.016028] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.016031] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.016061] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.031760] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.031950] hub 4-0:1.0: USB hub found [ 1.031953] hub 4-0:1.0: 2 ports detected [ 1.032006] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.032011] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.032014] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.032046] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.040048] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.040256] hub 5-0:1.0: USB hub found [ 1.040263] hub 5-0:1.0: 2 ports detected [ 1.040426] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.040427] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.040923] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.040977] mice: PS/2 mouse device common for all mice [ 1.041077] rtc_cmos 00:03: RTC can wake from S4 [ 1.041121] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.041145] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.041236] device-mapper: uevent: version 1.0.3 [ 1.041321] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 1.041364] device-mapper: multipath: version 1.1.1 loaded [ 1.041367] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.041463] EISA: Probing bus 0 at eisa.0 [ 1.041465] EISA: Cannot allocate resource for mainboard [ 1.041467] Cannot allocate resource for EISA slot 1 [ 1.041468] Cannot allocate resource for EISA slot 2 [ 1.041470] Cannot allocate resource for EISA slot 3 [ 1.041471] Cannot allocate resource for EISA slot 4 [ 1.041473] Cannot allocate resource for EISA slot 5 [ 1.041474] Cannot allocate resource for EISA slot 6 [ 1.041476] Cannot allocate resource for EISA slot 7 [ 1.041477] Cannot allocate resource for EISA slot 8 [ 1.041479] EISA: Detected 0 cards. [ 1.041517] cpuidle: using governor ladder [ 1.041519] cpuidle: using governor menu [ 1.041752] TCP cubic registered [ 1.041861] NET: Registered protocol family 10 [ 1.042168] lo: Disabled Privacy Extensions [ 1.042349] NET: Registered protocol family 17 [ 1.042361] Registering the dns_resolver key type [ 1.043012] Using IPI No-Shortcut mode [ 1.043086] PM: Hibernation image not present or could not be loaded. [ 1.043097] registered taskstats version 1 [ 1.043267] Magic number: 11:230:535 [ 1.043282] bdi 1:13: hash matches [ 1.043341] rtc_cmos 00:03: setting system clock to 2011-01-04 14:31:23 UTC (1294151483) [ 1.043344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.043345] EDD information not available. [ 1.062592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.088372] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 [ 1.100319] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 1.100325] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.104251] ata1.00: configured for UDMA/66 [ 1.106853] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5 [ 1.111034] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.111039] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.111217] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.111264] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.116314] ata3.00: configured for UDMA/133 [ 1.116455] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 1.116639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.116656] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.116681] sd 2:0:0:0: [sda] Write Protect is off [ 1.116683] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.116704] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.155644] sda: sda1 sda2 sda3 < sda5 > sda4 [ 1.155905] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.155920] Freeing unused kernel memory: 684k freed [ 1.156250] Write protecting the kernel text: 4996k [ 1.156285] Write protecting the kernel read-only data: 1960k [ 1.168665] udev[73]: starting version 163 [ 1.247545] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.247556] ATL1E 0000:01:00.0: setting latency timer to 64 [ 1.320023] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.737007] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 1.737011] EXT4-fs (sda5): write access will be enabled during recovery [ 1.828027] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.023842] usbcore: registered new interface driver usbhid [ 2.023844] usbhid: USB HID core driver [ 2.037361] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 2.037463] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0 [ 3.605086] EXT4-fs (sda5): orphan cleanup on readonly fs [ 3.605095] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392520 [ 3.605117] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392516 [ 3.605125] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392511 [ 3.605132] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392510 [ 3.605138] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 392509 [ 3.605144] EXT4-fs (sda5): 5 orphan inodes deleted [ 3.605146] EXT4-fs (sda5): recovery complete [ 3.882778] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 17.301220] udev[321]: starting version 163 [ 17.361072] Adding 5999612k swap on /dev/sda4. Priority:-1 extents:1 across:5999612k [ 17.575315] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 17.698789] lp: driver loaded but no devices found [ 17.710423] parport_pc 00:06: reported by Plug and Play ACPI [ 17.710538] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 17.728892] ATL1E 0000:01:00.0: irq 40 for MSI/MSI-X [ 17.729166] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.800449] type=1400 audit(1294144300.255:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=585 comm="apparmor_parser" [ 17.800500] type=1400 audit(1294144300.255:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=585 comm="apparmor_parser" [ 17.800541] type=1400 audit(1294144300.255:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=585 comm="apparmor_parser" [ 17.808168] lp0: using parport0 (interrupt-driven). [ 17.900166] Linux agpgart interface v0.103 [ 17.900562] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.903854] type=1400 audit(1294144300.355:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=751 comm="apparmor_parser" [ 17.976249] cfg80211: Calling CRDA to update world regulatory domain [ 17.984896] type=1400 audit(1294144300.439:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=752 comm="apparmor_parser" [ 17.984951] type=1400 audit(1294144300.439:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser" [ 17.984996] type=1400 audit(1294144300.439:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser" [ 17.994324] cfg80211: World regulatory domain updated: [ 17.994327] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.994329] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.994331] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.994333] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.994335] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.994337] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.055534] ppdev: user-space parallel port driver [ 18.073904] intel_rng: FWH not detected [ 18.112522] leds_ss4200: no LED devices found [ 18.194967] type=1400 audit(1294144300.647:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=768 comm="apparmor_parser" [ 18.195091] type=1400 audit(1294144300.647:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=768 comm="apparmor_parser" [ 18.213785] agpgart-intel 0000:00:00.0: Intel G41 Chipset [ 18.213866] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 18.214328] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 18.227218] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 18.275401] type=1400 audit(1294144300.727:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=770 comm="apparmor_parser" [ 18.424059] [drm] Initialized drm 1.1.0 20060810 [ 18.453942] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 18.453987] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 18.454069] usbcore: registered new interface driver rt2500usb [ 18.541065] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.541070] i915 0000:00:02.0: setting latency timer to 64 [ 18.555481] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 18.561651] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 18.655440] Console: switching to colour frame buffer device 170x48 [ 18.658548] fb0: inteldrmfb frame buffer device [ 18.658550] drm: registered panic notifier [ 18.658882] No ACPI video bus found [ 18.658974] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.856185] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 18.856747] Registered led device: rt73usb-phy1::radio [ 18.856766] Registered led device: rt73usb-phy1::assoc [ 18.856784] Registered led device: rt73usb-phy1::quality [ 18.857260] usbcore: registered new interface driver rt73usb [ 19.104832] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.112315] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 19.112363] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 19.112389] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.244494] hda_codec: ALC887: BIOS auto-probing. [ 19.259882] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 21.185036] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 22.641813] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 22.641817] vboxdrv: Successfully done. [ 22.641818] vboxdrv: Found 2 processor cores. [ 22.642282] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0xaeb [ 22.642332] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 22.642334] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001). [ 27.364688] wlan0: authenticate with 00:24:d2:a4:88:40 (try 1) [ 27.366194] wlan0: authenticated [ 27.387686] wlan0: associate with 00:24:d2:a4:88:40 (try 1) [ 27.389450] wlan0: RX AssocResp from 00:24:d2:a4:88:40 (capab=0x401 status=0 aid=1) [ 27.389455] wlan0: associated [ 27.401713] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.856010] wlan0: no IPv6 routers present [ 84.370215] process `skype' is using obsolete setsockopt SO_BSDCOMPAT ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Sound problem 2011-01-04 16:23 Sound problem Alex Arnautu @ 2011-01-05 13:51 ` Andy Whitcroft 2011-01-23 10:56 ` Alex Arnautu 0 siblings, 1 reply; 4+ messages in thread From: Andy Whitcroft @ 2011-01-05 13:51 UTC (permalink / raw) To: Alex Arnautu; +Cc: Kernel Team, linux-kernel On Tue, Jan 04, 2011 at 06:23:42PM +0200, Alex Arnautu wrote: > I'm having problems with sound. I tested 2.6.35-24 generic and > 2.6.37-rc8. The problem is that on stable version, I can talk with my > friends on GMail or Skype but I can't record sounds with "Sound > Recorder". On the testing version I can't even talk on GMail or Skype > with my microphone. I atached the dmesg files for 2.6.37-rc8 and > 2.6.35-24 generic. If the mic is working in some applications this is much more likely a userspace issue than anything else. I would recommend filing a bug against 'alsa-driver' for Ubuntu at least as this will get us all of the logs and configurations we need to investigate; you can use 'ubuntu-bug alsa-driver' to file this. -apw ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Sound problem 2011-01-05 13:51 ` Andy Whitcroft @ 2011-01-23 10:56 ` Alex Arnautu 2011-01-27 7:27 ` Takashi Iwai 0 siblings, 1 reply; 4+ messages in thread From: Alex Arnautu @ 2011-01-23 10:56 UTC (permalink / raw) To: Andy Whitcroft; +Cc: Kernel Team, linux-kernel, tiway [-- Attachment #1: Type: text/plain, Size: 1008 bytes --] I'm testing 2.6.38-rc2, and my microphone is still not working. I attached alsa-info. I want to mention that 2.6.35 is working fine. On Wed, Jan 5, 2011 at 3:51 PM, Andy Whitcroft <apw@canonical.com> wrote: > > On Tue, Jan 04, 2011 at 06:23:42PM +0200, Alex Arnautu wrote: > > > I'm having problems with sound. I tested 2.6.35-24 generic and > > 2.6.37-rc8. The problem is that on stable version, I can talk with my > > friends on GMail or Skype but I can't record sounds with "Sound > > Recorder". On the testing version I can't even talk on GMail or Skype > > with my microphone. I atached the dmesg files for 2.6.37-rc8 and > > 2.6.35-24 generic. > > If the mic is working in some applications this is much more likely a > userspace issue than anything else. I would recommend filing a bug > against 'alsa-driver' for Ubuntu at least as this will get us all of the > logs and configurations we need to investigate; you can use 'ubuntu-bug > alsa-driver' to file this. > > -apw [-- Attachment #2: alsa-info.txt --] [-- Type: text/plain, Size: 34347 bytes --] upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Sun Jan 23 10:39:11 UTC 2011 !!Linux Distribution !!------------------ Ubuntu 10.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 10.10" !!DMI Information !!--------------- Manufacturer: System manufacturer Product Name: System Product Name Product Version: System Version !!Kernel Information !!------------------ Kernel release: 2.6.38-rc2+ Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfe9f8000 irq 43 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:27d8 (rev 01) Subsystem: 1043:83f2 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-caiaq: index=-2 snd-usb-ua101: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 snd-usb-audio: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC887 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0887 Subsystem Id: 0x104383f2 Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x411: Stereo Device: name="ALC887 Analog", type="Audio", device=0 Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC887 Digital", type="SPDIF", device=1 Converter: stream=5, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC887 Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x1f 0x1f] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Device: name="ALC887 Analog", type="Audio", device=2 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x9e 0x9e] [0x9f 0x9f] [0x9f 0x9f] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Control: name="PCM Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="PCM Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1f 0x1f] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x11 [Pin Complex] wcaps 0x400780: Mono Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x0: Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x0: Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19840: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19850: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181304f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214020: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x4004c601: [N/A] Line Out at Ext N/A Conn = RCA, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400780: Mono Digital Pincap 0x00000014: OUT Detect Pin Default 0x01456130: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Orange DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400680: Mono Digital Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=25 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 12 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x411: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b Codec: Intel Eaglelake HDMI Address: 1 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862803 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6211: 8-Channels Digital Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Device: name="HDMI 0", type="HDMI", device=3 Converter: stream=8, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Node 0x03 [Pin Complex] wcaps 0x40739d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=03, enabled=1 Connection: 1 0x02 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 9 Jan 23 12:18 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 8 Jan 23 12:18 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 7 Jan 23 12:18 /dev/snd/hwC0D1 crw-rw----+ 1 root audio 116, 6 Jan 23 12:22 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 5 Jan 23 12:23 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 4 Jan 23 12:20 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 3 Jan 23 12:18 /dev/snd/pcmC0D2c crw-rw----+ 1 root audio 116, 2 Jan 23 12:20 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 1 Jan 23 12:18 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Jan 23 12:18 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Jan 23 12:18 . drwxr-xr-x 3 root root 260 Jan 23 12:18 .. lrwxrwxrwx 1 root root 12 Jan 23 12:18 pci-0000:00:1b.0 -> ../controlC0 !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC887 Analog [ALC887 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC887 Digital [ALC887 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC887 Analog [ALC887 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: ALC887 Analog [ALC887 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Card hw:0 'Intel'/'HDA Intel at 0xfe9f8000 irq 43' Mixer name : 'Intel Eaglelake HDMI' Components : 'HDA:10ec0887,104383f2,00100202 HDA:80862803,80860101,00100000' Controls : 29 Simple ctrls : 16 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pswitch penum Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [off] Front Right: Playback 31 [100%] [12.00dB] [off] Simple mixer control 'Front Mic Boost',0 Capabilities: volume penum Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 3 [100%] [30.00dB] Front Right: 3 [100%] [30.00dB] Simple mixer control 'Line',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [off] Front Right: Playback 31 [100%] [12.00dB] [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958 Default PCM',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 31 [100%] [30.00dB] [on] Front Right: Capture 31 [100%] [30.00dB] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-16.50dB] [on] Front Right: Capture 0 [0%] [-16.50dB] [on] Simple mixer control 'Digital',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 60 [50%] [0.00dB] Front Right: Capture 60 [50%] [0.00dB] Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Rear Mic' 'Front Mic' 'Line' Item0: 'Front Mic' Simple mixer control 'Input Source',1 Capabilities: cenum Items: 'Rear Mic' 'Front Mic' 'Line' Item0: 'Rear Mic' Simple mixer control 'Rear Mic',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 30 [97%] [10.50dB] [off] Front Right: Playback 30 [97%] [10.50dB] [off] Simple mixer control 'Rear Mic Boost',0 Capabilities: volume penum Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 3 [100%] [30.00dB] Front Right: 3 [100%] [30.00dB] !!Alsactl output !!------------- --startcollapse-- state.Intel { control.1 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'PCM Playback Volume' value.0 31 value.1 31 } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'PCM Playback Switch' value.0 true value.1 true } control.3 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true } control.4 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Rear Mic Playback Volume' value.0 30 value.1 30 } control.5 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Rear Mic Playback Switch' value.0 false value.1 false } control.6 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Front Mic Playback Volume' value.0 31 value.1 31 } control.7 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Front Mic Playback Switch' value.0 false value.1 false } control.8 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Line Playback Volume' value.0 31 value.1 31 } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Line Playback Switch' value.0 false value.1 false } control.10 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 3' comment.dbmin 0 comment.dbmax 3000 iface MIXER name 'Rear Mic Boost Volume' value.0 3 value.1 3 } control.11 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 3' comment.dbmin 0 comment.dbmax 3000 iface MIXER name 'Front Mic Boost Volume' value.0 3 value.1 3 } control.12 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' value.0 true value.1 true } control.13 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' index 1 value.0 true value.1 true } control.14 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -1650 comment.dbmax 3000 iface MIXER name 'Capture Volume' value.0 31 value.1 31 } control.15 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -1650 comment.dbmax 3000 iface MIXER name 'Capture Volume' index 1 value.0 0 value.1 0 } control.16 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 'Rear Mic' comment.item.1 'Front Mic' comment.item.2 Line iface MIXER name 'Input Source' value 'Front Mic' } control.17 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 'Rear Mic' comment.item.1 'Front Mic' comment.item.2 Line iface MIXER name 'Input Source' index 1 value 'Rear Mic' } control.18 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.19 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.20 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.21 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } control.22 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Default PCM Playback Switch' value true } control.23 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value 31 } control.24 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Playback Switch' value true } control.25 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.26 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.27 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.28 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' index 1 value true } control.29 { comment.access 'read write user' comment.type INTEGER comment.count 2 comment.range '0 - 120' comment.tlv '0000000100000008fffff44800000032' comment.dbmin -3000 comment.dbmax 3000 iface MIXER name 'Digital Capture Volume' value.0 60 value.1 60 } } --endcollapse-- !!All Loaded Modules !!------------------ Module binfmt_misc kvm_intel kvm arc4 snd_hda_codec_hdmi snd_hda_codec_realtek rt73usb snd_hda_intel crc_itu_t snd_hda_codec snd_hwdep i915 rt2500usb rt2x00usb snd_pcm rt2x00lib snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device ppdev parport_pc snd mac80211 soundcore snd_page_alloc lp hid_a4tech drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt agpgart usbhid cfg80211 parport video asus_atk0110 hid atl1e !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x11 0x411111f0 0x12 0x411111f0 0x14 0x01014010 0x15 0x411111f0 0x16 0x411111f0 0x17 0x411111f0 0x18 0x01a19840 0x19 0x02a19850 0x1a 0x0181304f 0x1b 0x02214020 0x1c 0x411111f0 0x1d 0x4004c601 0x1e 0x01456130 0x1f 0x411111f0 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D1/init_pin_configs: 0x03 0x18560010 /sys/class/sound/hwC0D1/driver_pin_configs: /sys/class/sound/hwC0D1/user_pin_configs: /sys/class/sound/hwC0D1/init_verbs: !!ALSA/HDA dmesg !!------------------ [ 22.362695] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 22.389397] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 22.389453] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 22.389478] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 22.510308] hda_codec: ALC887: BIOS auto-probing. [ 22.647394] type=1400 audit(1295777923.261:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=881 comm="apparmor_parser" -- [ 22.724859] type=1400 audit(1295777923.341:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=882 comm="apparmor_parser" [ 22.741056] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 22.877169] ATL1E 0000:01:00.0: irq 44 for MSI/MSI-X ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Sound problem 2011-01-23 10:56 ` Alex Arnautu @ 2011-01-27 7:27 ` Takashi Iwai 0 siblings, 0 replies; 4+ messages in thread From: Takashi Iwai @ 2011-01-27 7:27 UTC (permalink / raw) To: Alex Arnautu; +Cc: Andy Whitcroft, Kernel Team, linux-kernel At Sun, 23 Jan 2011 12:56:29 +0200, Alex Arnautu wrote: > > I'm testing 2.6.38-rc2, and my microphone is still not working. > > I attached alsa-info. > > I want to mention that 2.6.35 is working fine. Then please give the output of alsa-info.sh on both working and (the latest) non-working versions. Looking at your alsa-info.sh output, the machine has three inputs: one front-mic jack, one rear-mic jack, and one line-in jack. Which mic jack are you using at all? And which sound backend is being used? Note that the driver provides two analog PCM inputs. Thus, an app *might* be opening the secondary stream mistakenly, which you don't set up properly yet (it's set to Rear Mic, and no gain volume). Anyway, what you need first is to test with an easier program like arecord. Try like % arecord -fdat -vv -Dhw:0 foo.wav If the recording works, the problem isn't about the kernel driver. Takashi > On Wed, Jan 5, 2011 at 3:51 PM, Andy Whitcroft <apw@canonical.com> wrote: > > > > On Tue, Jan 04, 2011 at 06:23:42PM +0200, Alex Arnautu wrote: > > > > > I'm having problems with sound. I tested 2.6.35-24 generic and > > > 2.6.37-rc8. The problem is that on stable version, I can talk with my > > > friends on GMail or Skype but I can't record sounds with "Sound > > > Recorder". On the testing version I can't even talk on GMail or Skype > > > with my microphone. I atached the dmesg files for 2.6.37-rc8 and > > > 2.6.35-24 generic. > > > > If the mic is working in some applications this is much more likely a > > userspace issue than anything else. I would recommend filing a bug > > against 'alsa-driver' for Ubuntu at least as this will get us all of the > > logs and configurations we need to investigate; you can use 'ubuntu-bug > > alsa-driver' to file this. > > > > -apw ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-01-27 7:27 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-01-04 16:23 Sound problem Alex Arnautu 2011-01-05 13:51 ` Andy Whitcroft 2011-01-23 10:56 ` Alex Arnautu 2011-01-27 7:27 ` Takashi Iwai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox