* [Patch 04/11]Power: DA9052 battery driver v4
@ 2011-10-19 14:18 Ashish Jangam
2011-11-08 8:52 ` Ashish Jangam
0 siblings, 1 reply; 6+ messages in thread
From: Ashish Jangam @ 2011-10-19 14:18 UTC (permalink / raw)
To: Mark Brown
Cc: linaro-dev@lists.linaro.org, cbou@mail.ru, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver
for definitions and methods.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
Changes since v3
- Included power_supply.h file
- Corrected the definition of DA9052_BAT_THRESHOLD macro
- Changed definition of charger_type_enum
- Added API da9052_battery_read_end_current
- Added API da9052_battery_check_status
- Changed the way of handling the interrupts in da9052_bat_irq
Changes since v2
- Correct code styling for inline functions
- Remove averaging algorithm
- Set use_for_apm thru board specific parameter
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/da9052-battery.c | 611 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 619 insertions(+), 0 deletions(-)
create mode 100755 drivers/power/da9052-battery.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 57de051..c041712 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -149,6 +149,13 @@ config BATTERY_DA9030
Say Y here to enable support for batteries charger integrated into
DA9030 PMIC.
+config BATTERY_DA9052
+ tristate "Dialog DA9052 Battery"
+ depends on PMIC_DA9052
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9052 PMIC.
+
config BATTERY_MAX17040
tristate "Maxim MAX17040 Fuel Gauge"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b4af13d..c570e20 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
new file mode 100755
index 0000000..d9096df
--- /dev/null
+++ b/drivers/power/da9052-battery.c
@@ -0,0 +1,611 @@
+/*
+ * Batttery Driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+#include <linux/mfd/da9052/reg.h>
+
+/* STATIC CONFIGURATION */
+#define DA9052_BAT_CUTOFF_VOLT 2800
+#define DA9052_BAT_THRESHOLD 62000
+#define DA9052_BAT_CAPACITY_LIMIT_LOW 4
+#define DA9052_AVERAGE_SIZE 4
+#define DA9052_LOOK_UP_TABLE_SIZE 68
+#define DA9052_NO_OF_LOOKUP_TABLE 3
+
+enum charger_type_enum {
+ DA9052_NOCHARGER = 1,
+ DA9052_CHARGER,
+};
+
+static const u16 temperature_lookup_ref[3] = {10, 25, 40};
+static u32 const vbat_vs_capacity_look_up[3][68][2] = {
+ /* For temperature 10 degree celisus*/
+ {
+ {4082, 100}, {4036, 98},
+ {4020, 96}, {4008, 95},
+ {3997, 93}, {3983, 91},
+ {3964, 90}, {3943, 88},
+ {3926, 87}, {3912, 85},
+ {3900, 84}, {3890, 82},
+ {3881, 80}, {3873, 79},
+ {3865, 77}, {3857, 76},
+ {3848, 74}, {3839, 73},
+ {3829, 71}, {3820, 70},
+ {3811, 68}, {3802, 67},
+ {3794, 65}, {3785, 64},
+ {3778, 62}, {3770, 61},
+ {3763, 59}, {3756, 58},
+ {3750, 56}, {3744, 55},
+ {3738, 53}, {3732, 52},
+ {3727, 50}, {3722, 49},
+ {3717, 47}, {3712, 46},
+ {3708, 44}, {3703, 43},
+ {3700, 41}, {3696, 40},
+ {3693, 38}, {3691, 37},
+ {3688, 35}, {3686, 34},
+ {3683, 32}, {3681, 31},
+ {3678, 29}, {3675, 28},
+ {3672, 26}, {3669, 25},
+ {3665, 23}, {3661, 22},
+ {3656, 21}, {3651, 19},
+ {3645, 18}, {3639, 16},
+ {3631, 15}, {3622, 13},
+ {3611, 12}, {3600, 10},
+ {3587, 9}, {3572, 7},
+ {3548, 6}, {3503, 5},
+ {3420, 3}, {3268, 2},
+ {2992, 1}, {2746, 0}
+ },
+ /* For temperature 25 degree celisus */
+ {
+ {4102, 100}, {4065, 98},
+ {4048, 96}, {4034, 95},
+ {4021, 93}, {4011, 92},
+ {4001, 90}, {3986, 88},
+ {3968, 87}, {3952, 85},
+ {3938, 84}, {3926, 82},
+ {3916, 81}, {3908, 79},
+ {3900, 77}, {3892, 76},
+ {3883, 74}, {3874, 73},
+ {3864, 71}, {3855, 70},
+ {3846, 68}, {3836, 67},
+ {3827, 65}, {3819, 64},
+ {3810, 62}, {3801, 61},
+ {3793, 59}, {3786, 58},
+ {3778, 56}, {3772, 55},
+ {3765, 53}, {3759, 52},
+ {3754, 50}, {3748, 49},
+ {3743, 47}, {3738, 46},
+ {3733, 44}, {3728, 43},
+ {3724, 41}, {3720, 40},
+ {3716, 38}, {3712, 37},
+ {3709, 35}, {3706, 34},
+ {3703, 33}, {3701, 31},
+ {3698, 30}, {3696, 28},
+ {3693, 27}, {3690, 25},
+ {3687, 24}, {3683, 22},
+ {3680, 21}, {3675, 19},
+ {3671, 18}, {3666, 17},
+ {3660, 15}, {3654, 14},
+ {3647, 12}, {3639, 11},
+ {3630, 9}, {3621, 8},
+ {3613, 6}, {3606, 5},
+ {3597, 4}, {3582, 2},
+ {3546, 1}, {2747, 0}
+ },
+ /* For temperature 40 degree celisus*/
+ {
+ {4114, 100}, {4081, 98},
+ {4065, 96}, {4050, 95},
+ {4036, 93}, {4024, 92},
+ {4013, 90}, {4002, 88},
+ {3990, 87}, {3976, 85},
+ {3962, 84}, {3950, 82},
+ {3939, 81}, {3930, 79},
+ {3921, 77}, {3912, 76},
+ {3902, 74}, {3893, 73},
+ {3883, 71}, {3874, 70},
+ {3865, 68}, {3856, 67},
+ {3847, 65}, {3838, 64},
+ {3829, 62}, {3820, 61},
+ {3812, 59}, {3803, 58},
+ {3795, 56}, {3787, 55},
+ {3780, 53}, {3773, 52},
+ {3767, 50}, {3761, 49},
+ {3756, 47}, {3751, 46},
+ {3746, 44}, {3741, 43},
+ {3736, 41}, {3732, 40},
+ {3728, 38}, {3724, 37},
+ {3720, 35}, {3716, 34},
+ {3713, 33}, {3710, 31},
+ {3707, 30}, {3704, 28},
+ {3701, 27}, {3698, 25},
+ {3695, 24}, {3691, 22},
+ {3686, 21}, {3681, 19},
+ {3676, 18}, {3671, 17},
+ {3666, 15}, {3661, 14},
+ {3655, 12}, {3648, 11},
+ {3640, 9}, {3632, 8},
+ {3622, 6}, {3616, 5},
+ {3611, 4}, {3604, 2},
+ {3594, 1}, {2747, 0}
+ }
+};
+
+struct da9052_battery {
+ struct da9052 *da9052;
+ struct power_supply psy;
+ int charger_type;
+ int status;
+ int health;
+};
+
+static inline int volt_reg_to_mV(int value)
+{
+ return ((value * 1000) / 512) + 2500;
+}
+
+static inline int ichg_reg_to_mA(int value)
+{
+ return (value * 3900) / 1000;
+}
+
+static int da9052_battery_read_end_current(struct da9052_battery *battery,
+ int *current_mA)
+{
+ int ret;
+
+ if (battery->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(battery->da9052, DA9052_ICHG_END_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGEND_ICHGEND);
+
+ return 0;
+}
+
+static int da9052_battery_read_current(struct da9052_battery *battery,
+ int *current_mA)
+{
+ int ret;
+
+ if (battery->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(battery->da9052, DA9052_ICHG_AV_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGAV_ICHGAV);
+
+ return 0;
+}
+
+static int da9052_battery_check_status(struct da9052_battery *battery,
+ int *status)
+{
+ uint8_t v[2] = {0, 0};
+ uint8_t bat_status, chg_end;
+ int ret, chg_current, chg_end_current;
+
+ ret = da9052_group_read(battery->da9052, DA9052_STATUS_A_REG, 2, v);
+ if (ret < 0)
+ return ret;
+
+ bat_status = v[0];
+ chg_end = v[1];
+
+ /* Preference to WALL(DCIN) charger unit */
+ if (((bat_status & DA9052_STATUSA_DCINSEL) &&
+ (bat_status & DA9052_STATUSA_DCINDET))
+ ||
+ ((bat_status & DA9052_STATUSA_VBUSSEL) &&
+ (bat_status & DA9052_STATUSA_VBUSDET))
+ ) {
+ battery->charger_type = DA9052_CHARGER;
+
+ /* If charging end flag is set and Charging current is greater
+ * than charging end limit then battery is charging
+ */
+ if ((chg_end & DA9052_STATUSB_CHGEND) != 0) {
+ ret = da9052_battery_read_current(battery,
+ &chg_current);
+ if (ret < 0)
+ return ret;
+ ret = da9052_battery_read_end_current(battery,
+ &chg_end_current);
+ if (ret < 0)
+ return ret;
+
+ if (chg_current >= chg_end_current)
+ battery->status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ battery->status =
+ POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+ /* If Charging end flag is cleared then battery is charging */
+ else
+ battery->status = POWER_SUPPLY_STATUS_CHARGING;
+ } else if (bat_status & DA9052_STATUSA_DCINDET ||
+ bat_status & DA9052_STATUSA_VBUSDET) {
+ battery->charger_type = DA9052_CHARGER;
+ battery->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ battery->charger_type = DA9052_NOCHARGER;
+ battery->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (status != NULL)
+ *status = battery->status;
+ return 0;
+}
+
+static int da9052_battery_read_volt(struct da9052_battery *battery,
+ int *volt_mV)
+{
+ int voltage;
+
+ voltage = da9052_adc_manual_read(battery->da9052,
+ DA9052_ADC_MAN_MUXSEL_VBAT);
+ if (voltage < 0)
+ return voltage;
+
+ *volt_mV = volt_reg_to_mV(voltage);
+
+ return 0;
+}
+
+static int da9052_battery_check_presence(struct da9052_battery *battery,
+ int *illegal)
+{
+ int bat_temp;
+
+ bat_temp = da9052_adc_temperature_read(battery->da9052);
+ if (bat_temp < 0)
+ return bat_temp;
+
+ if (bat_temp > DA9052_BAT_THRESHOLD)
+ *illegal = 1;
+ else
+ *illegal = 0;
+
+ return 0;
+}
+
+static int interpolated(int vbat_lower, int vbat_upper, int level_lower,
+ int level_upper, int bat_voltage)
+{
+ int temp;
+
+ temp = ((level_upper - level_lower) * 1000) / (vbat_upper - vbat_lower);
+ temp = level_lower + (((bat_voltage - vbat_lower) * temp) / 1000);
+
+ return temp;
+}
+
+unsigned char select_temperature(unsigned char temp_index, int bat_temperature)
+{
+ int temp_temperature;
+
+ temp_temperature = (temperature_lookup_ref[temp_index] +
+ temperature_lookup_ref[temp_index + 1]) / 2;
+
+ if (bat_temperature >= temp_temperature) {
+ temp_index += 1;
+ return temp_index;
+ } else
+ return temp_index;
+}
+
+static int da9052_battery_read_capacity(struct da9052_battery *battery,
+ int *capacity)
+{
+ int bat_temperature, bat_voltage;
+ int vbat_lower, vbat_upper, level_upper, level_lower;
+ int ret, flag, index, access_index = 0;
+
+ ret = da9052_battery_read_volt(battery, &bat_voltage);
+ if (ret < 0)
+ return ret;
+
+ bat_temperature = da9052_adc_temperature_read(battery->da9052);
+ if (bat_temperature < 0)
+ return bat_temperature;
+
+ for (index = 0; index < (DA9052_NO_OF_LOOKUP_TABLE - 1); index++) {
+ if (bat_temperature <= temperature_lookup_ref[0]) {
+ access_index = 0;
+ break;
+ } else if (bat_temperature >
+ temperature_lookup_ref[DA9052_NO_OF_LOOKUP_TABLE]) {
+ access_index = DA9052_NO_OF_LOOKUP_TABLE - 1;
+ break;
+ } else if ((bat_temperature >= temperature_lookup_ref[index]) &&
+ (bat_temperature >= temperature_lookup_ref[index + 1]
+ )) {
+ access_index = select_temperature(index,
+ bat_temperature);
+ break;
+ }
+ }
+ if (bat_voltage >= vbat_vs_capacity_look_up[access_index][0][0]) {
+ *capacity = 100;
+ return 0;
+ }
+ if (bat_voltage <= vbat_vs_capacity_look_up[access_index]
+ [DA9052_LOOK_UP_TABLE_SIZE - 1][0]) {
+ *capacity = 0;
+ return 0;
+ }
+ flag = 0;
+
+ for (index = 0; index < (DA9052_LOOK_UP_TABLE_SIZE-1); index++) {
+ if ((bat_voltage <=
+ vbat_vs_capacity_look_up[access_index][index][0]) &&
+ (bat_voltage >=
+ vbat_vs_capacity_look_up[access_index][index + 1][0])) {
+ vbat_upper =
+ vbat_vs_capacity_look_up[access_index][index][0];
+ vbat_lower =
+ vbat_vs_capacity_look_up[access_index][index + 1][0];
+ level_upper =
+ vbat_vs_capacity_look_up[access_index][index][1];
+ level_lower =
+ vbat_vs_capacity_look_up[access_index][index + 1][1];
+ flag = 1;
+ break;
+ }
+ }
+ if (!flag)
+ return -EIO;
+
+ *capacity = interpolated(vbat_lower, vbat_upper, level_lower,
+ level_upper, bat_voltage);
+
+ return 0;
+}
+
+static int da9052_battery_check_health(struct da9052_battery *battery,
+ int *health)
+{
+ int ret, bat_illegal, capacity;
+
+ ret = da9052_battery_check_presence(battery, &bat_illegal);
+ if (ret < 0)
+ return ret;
+
+ if (bat_illegal) {
+ battery->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return 0;
+ }
+
+ if (battery->health != POWER_SUPPLY_HEALTH_OVERHEAT) {
+ ret = da9052_battery_read_capacity(battery, &capacity);
+ if (ret < 0)
+ return ret;
+ if (capacity < DA9052_BAT_CAPACITY_LIMIT_LOW)
+ battery->health = POWER_SUPPLY_HEALTH_DEAD;
+ else
+ battery->health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ *health = battery->health;
+
+ return 0;
+}
+
+static irqreturn_t da9052_bat_irq(int irq, void *data)
+{
+ struct da9052_battery *battery = (struct da9052_battery *)data;
+
+ irq -= battery->da9052->irq_base;
+
+ if (irq == DA9052_IRQ_CHGEND)
+ battery->status = POWER_SUPPLY_STATUS_FULL;
+ else
+ da9052_battery_check_status(battery, NULL);
+
+ if (irq == DA9052_IRQ_CHGEND || irq == DA9052_IRQ_DCIN ||
+ irq == DA9052_IRQ_VBUS || irq == DA9052_IRQ_TBAT) {
+ power_supply_changed(&battery->psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int da9052_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret, illegal;
+ struct da9052_battery *battery = container_of(psy,
+ struct da9052_battery, psy);
+
+ ret = da9052_battery_check_presence(battery, &illegal);
+ if (ret < 0)
+ return ret;
+
+ if (illegal && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = da9052_battery_check_status(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval =
+ (battery->charger_type == DA9052_NOCHARGER) ? 0 : 1;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = da9052_battery_check_presence(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = da9052_battery_check_health(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = DA9052_BAT_CUTOFF_VOLT * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = da9052_battery_read_volt(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = da9052_battery_read_current(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = da9052_battery_read_capacity(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = da9052_adc_temperature_read(battery->da9052);
+ ret = val->intval;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static enum power_supply_property da9052_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static struct power_supply template_battery = {
+ .name = "da9052-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = da9052_bat_props,
+ .num_properties = ARRAY_SIZE(da9052_bat_props),
+ .get_property = da9052_bat_get_property,
+};
+
+static const char *da9052_bat_irqs[] = {
+ "BATT TEMP",
+ "DCIN DET",
+ "DCIN REM",
+ "VBUS DET",
+ "VBUS REM",
+ "CHG END",
+};
+
+static s32 __devinit da9052_bat_probe(struct platform_device *pdev)
+{
+ struct da9052_pdata *pdata;
+ struct da9052_battery *battery;
+ int ret, irq, i;
+
+ battery = kzalloc(sizeof(struct da9052_battery), GFP_KERNEL);
+ if (!battery)
+ return -ENOMEM;
+
+ battery->da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = battery->da9052->dev->platform_data;
+
+ battery->psy = template_battery;
+ if (pdata != NULL && pdata->use_for_apm)
+ battery->psy.use_for_apm = pdata->use_for_apm;
+ battery->charger_type = DA9052_NOCHARGER;
+ battery->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ battery->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ ret = request_threaded_irq(battery->da9052->irq_base + irq,
+ NULL, da9052_bat_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ da9052_bat_irqs[i], battery);
+ if (ret != 0) {
+ dev_err(battery->da9052->dev,
+ "DA9052 failed to request %s IRQ %d: %d\n",
+ da9052_bat_irqs[i], irq, ret);
+ goto err;
+ }
+ }
+
+ ret = power_supply_register(&pdev->dev, &battery->psy);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ for (; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ free_irq(irq, battery);
+ }
+ kfree(battery);
+ return ret;
+}
+static int __devexit da9052_bat_remove(struct platform_device *pdev)
+{
+ int i, irq;
+ struct da9052_battery *battery = platform_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ free_irq(irq, battery);
+ }
+ power_supply_unregister(&battery->psy);
+
+ return 0;
+}
+
+static struct platform_driver da9052_bat_driver = {
+ .probe = da9052_bat_probe,
+ .remove = __devexit_p(da9052_bat_remove),
+ .driver = {
+ .name = "da9052-bat",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9052_bat_init(void)
+{
+ return platform_driver_register(&da9052_bat_driver);
+}
+module_init(da9052_bat_init);
+
+static void __exit da9052_bat_exit(void)
+{
+ platform_driver_unregister(&da9052_bat_driver);
+}
+module_exit(da9052_bat_exit);
+
+MODULE_DESCRIPTION("DA9052 BAT Device Driver");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-bat");
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Patch 04/11]Power: DA9052 battery driver v4
2011-10-19 14:18 [Patch 04/11]Power: DA9052 battery " Ashish Jangam
@ 2011-11-08 8:52 ` Ashish Jangam
2011-11-08 10:23 ` Mark Brown
0 siblings, 1 reply; 6+ messages in thread
From: Ashish Jangam @ 2011-11-08 8:52 UTC (permalink / raw)
To: Mark Brown
Cc: linaro-dev@lists.linaro.org, cbou@mail.ru, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
On Wed, 2011-10-19 at 19:48 +0530, Ashish Jangam wrote:
> Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver
> for definitions and methods.
>
> Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> ---
In case there are no review comments then can this be get ACK'ed?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Patch 04/11]Power: DA9052 battery driver v4
2011-11-08 8:52 ` Ashish Jangam
@ 2011-11-08 10:23 ` Mark Brown
2011-11-08 10:28 ` Ashish Jangam
0 siblings, 1 reply; 6+ messages in thread
From: Mark Brown @ 2011-11-08 10:23 UTC (permalink / raw)
To: Ashish Jangam
Cc: linaro-dev@lists.linaro.org, cbou@mail.ru, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
On Tue, Nov 08, 2011 at 02:22:44PM +0530, Ashish Jangam wrote:
> On Wed, 2011-10-19 at 19:48 +0530, Ashish Jangam wrote:
> > Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver
> > for definitions and methods.
> >
> > Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> > Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> > ---
> In case there are no review comments then can this be get ACK'ed?
The last time you posted this there was a serious issues with the MFD
core which meant it didn't seem worth reviewing.
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [Patch 04/11]Power: DA9052 battery driver v4
2011-11-08 10:23 ` Mark Brown
@ 2011-11-08 10:28 ` Ashish Jangam
0 siblings, 0 replies; 6+ messages in thread
From: Ashish Jangam @ 2011-11-08 10:28 UTC (permalink / raw)
To: Mark Brown
Cc: linaro-dev@lists.linaro.org, cbou@mail.ru, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1126 bytes --]
> -----Original Message-----
> From: Mark Brown [mailto:broonie@opensource.wolfsonmicro.com]
> Sent: Tuesday, November 08, 2011 3:53 PM
> To: Ashish Jangam
> Cc: linaro-dev@lists.linaro.org; cbou@mail.ru; dwmw2@infradead.org; linux-
> kernel@vger.kernel.org; Dajun
> Subject: Re: [Patch 04/11]Power: DA9052 battery driver v4
>
> On Tue, Nov 08, 2011 at 02:22:44PM +0530, Ashish Jangam wrote:
> > On Wed, 2011-10-19 at 19:48 +0530, Ashish Jangam wrote:
> > > Driver for DA9052 battery charger. This driver depends on DA9052 MFD
> core dirver
> > > for definitions and methods.
> > >
> > > Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> > > Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> > > ---
> > In case there are no review comments then can this be get ACK'ed?
>
> The last time you posted this there was a serious issues with the MFD
> core which meant it didn't seem worth reviewing.
If MFD know looks good to you then please ACK it.
ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 04/11] Power: DA9052 Battery driver v4
@ 2011-11-18 9:24 Ashish Jangam
2011-11-24 23:28 ` Anton Vorontsov
0 siblings, 1 reply; 6+ messages in thread
From: Ashish Jangam @ 2011-11-18 9:24 UTC (permalink / raw)
To: Mark Brown
Cc: linaro-dev@lists.linaro.org, cbou@mail.ru, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver
for definitions and methods.
Tested on Samsung SMDK6410 board with DA9052-BC and DA9053-BA evaluation boards.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
Changes since v3
- Included power_supply.h file
- Corrected the definition of DA9052_BAT_THRESHOLD macro
- Changed definition of charger_type_enum
- Added API da9052_battery_read_end_current
- Added API da9052_battery_check_status
- Changed the way of handling the interrupts in da9052_bat_irq
Changes since v2
- Correct code styling for inline functions
- Remove averaging algorithm
- Set use_for_apm thru board specific parameter
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/da9052-battery.c | 611 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 619 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/da9052-battery.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9f88641..9696502 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -150,6 +150,13 @@ config BATTERY_DA9030
Say Y here to enable support for batteries charger integrated into
DA9030 PMIC.
+config BATTERY_DA9052
+ tristate "Dialog DA9052 Battery"
+ depends on PMIC_DA9052
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9052 PMIC.
+
config BATTERY_MAX17040
tristate "Maxim MAX17040 Fuel Gauge"
depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b4af13d..c570e20 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
new file mode 100644
index 0000000..d9096df
--- /dev/null
+++ b/drivers/power/da9052-battery.c
@@ -0,0 +1,611 @@
+/*
+ * Batttery Driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+#include <linux/mfd/da9052/reg.h>
+
+/* STATIC CONFIGURATION */
+#define DA9052_BAT_CUTOFF_VOLT 2800
+#define DA9052_BAT_THRESHOLD 62000
+#define DA9052_BAT_CAPACITY_LIMIT_LOW 4
+#define DA9052_AVERAGE_SIZE 4
+#define DA9052_LOOK_UP_TABLE_SIZE 68
+#define DA9052_NO_OF_LOOKUP_TABLE 3
+
+enum charger_type_enum {
+ DA9052_NOCHARGER = 1,
+ DA9052_CHARGER,
+};
+
+static const u16 temperature_lookup_ref[3] = {10, 25, 40};
+static u32 const vbat_vs_capacity_look_up[3][68][2] = {
+ /* For temperature 10 degree celisus*/
+ {
+ {4082, 100}, {4036, 98},
+ {4020, 96}, {4008, 95},
+ {3997, 93}, {3983, 91},
+ {3964, 90}, {3943, 88},
+ {3926, 87}, {3912, 85},
+ {3900, 84}, {3890, 82},
+ {3881, 80}, {3873, 79},
+ {3865, 77}, {3857, 76},
+ {3848, 74}, {3839, 73},
+ {3829, 71}, {3820, 70},
+ {3811, 68}, {3802, 67},
+ {3794, 65}, {3785, 64},
+ {3778, 62}, {3770, 61},
+ {3763, 59}, {3756, 58},
+ {3750, 56}, {3744, 55},
+ {3738, 53}, {3732, 52},
+ {3727, 50}, {3722, 49},
+ {3717, 47}, {3712, 46},
+ {3708, 44}, {3703, 43},
+ {3700, 41}, {3696, 40},
+ {3693, 38}, {3691, 37},
+ {3688, 35}, {3686, 34},
+ {3683, 32}, {3681, 31},
+ {3678, 29}, {3675, 28},
+ {3672, 26}, {3669, 25},
+ {3665, 23}, {3661, 22},
+ {3656, 21}, {3651, 19},
+ {3645, 18}, {3639, 16},
+ {3631, 15}, {3622, 13},
+ {3611, 12}, {3600, 10},
+ {3587, 9}, {3572, 7},
+ {3548, 6}, {3503, 5},
+ {3420, 3}, {3268, 2},
+ {2992, 1}, {2746, 0}
+ },
+ /* For temperature 25 degree celisus */
+ {
+ {4102, 100}, {4065, 98},
+ {4048, 96}, {4034, 95},
+ {4021, 93}, {4011, 92},
+ {4001, 90}, {3986, 88},
+ {3968, 87}, {3952, 85},
+ {3938, 84}, {3926, 82},
+ {3916, 81}, {3908, 79},
+ {3900, 77}, {3892, 76},
+ {3883, 74}, {3874, 73},
+ {3864, 71}, {3855, 70},
+ {3846, 68}, {3836, 67},
+ {3827, 65}, {3819, 64},
+ {3810, 62}, {3801, 61},
+ {3793, 59}, {3786, 58},
+ {3778, 56}, {3772, 55},
+ {3765, 53}, {3759, 52},
+ {3754, 50}, {3748, 49},
+ {3743, 47}, {3738, 46},
+ {3733, 44}, {3728, 43},
+ {3724, 41}, {3720, 40},
+ {3716, 38}, {3712, 37},
+ {3709, 35}, {3706, 34},
+ {3703, 33}, {3701, 31},
+ {3698, 30}, {3696, 28},
+ {3693, 27}, {3690, 25},
+ {3687, 24}, {3683, 22},
+ {3680, 21}, {3675, 19},
+ {3671, 18}, {3666, 17},
+ {3660, 15}, {3654, 14},
+ {3647, 12}, {3639, 11},
+ {3630, 9}, {3621, 8},
+ {3613, 6}, {3606, 5},
+ {3597, 4}, {3582, 2},
+ {3546, 1}, {2747, 0}
+ },
+ /* For temperature 40 degree celisus*/
+ {
+ {4114, 100}, {4081, 98},
+ {4065, 96}, {4050, 95},
+ {4036, 93}, {4024, 92},
+ {4013, 90}, {4002, 88},
+ {3990, 87}, {3976, 85},
+ {3962, 84}, {3950, 82},
+ {3939, 81}, {3930, 79},
+ {3921, 77}, {3912, 76},
+ {3902, 74}, {3893, 73},
+ {3883, 71}, {3874, 70},
+ {3865, 68}, {3856, 67},
+ {3847, 65}, {3838, 64},
+ {3829, 62}, {3820, 61},
+ {3812, 59}, {3803, 58},
+ {3795, 56}, {3787, 55},
+ {3780, 53}, {3773, 52},
+ {3767, 50}, {3761, 49},
+ {3756, 47}, {3751, 46},
+ {3746, 44}, {3741, 43},
+ {3736, 41}, {3732, 40},
+ {3728, 38}, {3724, 37},
+ {3720, 35}, {3716, 34},
+ {3713, 33}, {3710, 31},
+ {3707, 30}, {3704, 28},
+ {3701, 27}, {3698, 25},
+ {3695, 24}, {3691, 22},
+ {3686, 21}, {3681, 19},
+ {3676, 18}, {3671, 17},
+ {3666, 15}, {3661, 14},
+ {3655, 12}, {3648, 11},
+ {3640, 9}, {3632, 8},
+ {3622, 6}, {3616, 5},
+ {3611, 4}, {3604, 2},
+ {3594, 1}, {2747, 0}
+ }
+};
+
+struct da9052_battery {
+ struct da9052 *da9052;
+ struct power_supply psy;
+ int charger_type;
+ int status;
+ int health;
+};
+
+static inline int volt_reg_to_mV(int value)
+{
+ return ((value * 1000) / 512) + 2500;
+}
+
+static inline int ichg_reg_to_mA(int value)
+{
+ return (value * 3900) / 1000;
+}
+
+static int da9052_battery_read_end_current(struct da9052_battery *battery,
+ int *current_mA)
+{
+ int ret;
+
+ if (battery->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(battery->da9052, DA9052_ICHG_END_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGEND_ICHGEND);
+
+ return 0;
+}
+
+static int da9052_battery_read_current(struct da9052_battery *battery,
+ int *current_mA)
+{
+ int ret;
+
+ if (battery->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(battery->da9052, DA9052_ICHG_AV_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGAV_ICHGAV);
+
+ return 0;
+}
+
+static int da9052_battery_check_status(struct da9052_battery *battery,
+ int *status)
+{
+ uint8_t v[2] = {0, 0};
+ uint8_t bat_status, chg_end;
+ int ret, chg_current, chg_end_current;
+
+ ret = da9052_group_read(battery->da9052, DA9052_STATUS_A_REG, 2, v);
+ if (ret < 0)
+ return ret;
+
+ bat_status = v[0];
+ chg_end = v[1];
+
+ /* Preference to WALL(DCIN) charger unit */
+ if (((bat_status & DA9052_STATUSA_DCINSEL) &&
+ (bat_status & DA9052_STATUSA_DCINDET))
+ ||
+ ((bat_status & DA9052_STATUSA_VBUSSEL) &&
+ (bat_status & DA9052_STATUSA_VBUSDET))
+ ) {
+ battery->charger_type = DA9052_CHARGER;
+
+ /* If charging end flag is set and Charging current is greater
+ * than charging end limit then battery is charging
+ */
+ if ((chg_end & DA9052_STATUSB_CHGEND) != 0) {
+ ret = da9052_battery_read_current(battery,
+ &chg_current);
+ if (ret < 0)
+ return ret;
+ ret = da9052_battery_read_end_current(battery,
+ &chg_end_current);
+ if (ret < 0)
+ return ret;
+
+ if (chg_current >= chg_end_current)
+ battery->status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ battery->status =
+ POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+ /* If Charging end flag is cleared then battery is charging */
+ else
+ battery->status = POWER_SUPPLY_STATUS_CHARGING;
+ } else if (bat_status & DA9052_STATUSA_DCINDET ||
+ bat_status & DA9052_STATUSA_VBUSDET) {
+ battery->charger_type = DA9052_CHARGER;
+ battery->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ battery->charger_type = DA9052_NOCHARGER;
+ battery->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (status != NULL)
+ *status = battery->status;
+ return 0;
+}
+
+static int da9052_battery_read_volt(struct da9052_battery *battery,
+ int *volt_mV)
+{
+ int voltage;
+
+ voltage = da9052_adc_manual_read(battery->da9052,
+ DA9052_ADC_MAN_MUXSEL_VBAT);
+ if (voltage < 0)
+ return voltage;
+
+ *volt_mV = volt_reg_to_mV(voltage);
+
+ return 0;
+}
+
+static int da9052_battery_check_presence(struct da9052_battery *battery,
+ int *illegal)
+{
+ int bat_temp;
+
+ bat_temp = da9052_adc_temperature_read(battery->da9052);
+ if (bat_temp < 0)
+ return bat_temp;
+
+ if (bat_temp > DA9052_BAT_THRESHOLD)
+ *illegal = 1;
+ else
+ *illegal = 0;
+
+ return 0;
+}
+
+static int interpolated(int vbat_lower, int vbat_upper, int level_lower,
+ int level_upper, int bat_voltage)
+{
+ int temp;
+
+ temp = ((level_upper - level_lower) * 1000) / (vbat_upper - vbat_lower);
+ temp = level_lower + (((bat_voltage - vbat_lower) * temp) / 1000);
+
+ return temp;
+}
+
+unsigned char select_temperature(unsigned char temp_index, int bat_temperature)
+{
+ int temp_temperature;
+
+ temp_temperature = (temperature_lookup_ref[temp_index] +
+ temperature_lookup_ref[temp_index + 1]) / 2;
+
+ if (bat_temperature >= temp_temperature) {
+ temp_index += 1;
+ return temp_index;
+ } else
+ return temp_index;
+}
+
+static int da9052_battery_read_capacity(struct da9052_battery *battery,
+ int *capacity)
+{
+ int bat_temperature, bat_voltage;
+ int vbat_lower, vbat_upper, level_upper, level_lower;
+ int ret, flag, index, access_index = 0;
+
+ ret = da9052_battery_read_volt(battery, &bat_voltage);
+ if (ret < 0)
+ return ret;
+
+ bat_temperature = da9052_adc_temperature_read(battery->da9052);
+ if (bat_temperature < 0)
+ return bat_temperature;
+
+ for (index = 0; index < (DA9052_NO_OF_LOOKUP_TABLE - 1); index++) {
+ if (bat_temperature <= temperature_lookup_ref[0]) {
+ access_index = 0;
+ break;
+ } else if (bat_temperature >
+ temperature_lookup_ref[DA9052_NO_OF_LOOKUP_TABLE]) {
+ access_index = DA9052_NO_OF_LOOKUP_TABLE - 1;
+ break;
+ } else if ((bat_temperature >= temperature_lookup_ref[index]) &&
+ (bat_temperature >= temperature_lookup_ref[index + 1]
+ )) {
+ access_index = select_temperature(index,
+ bat_temperature);
+ break;
+ }
+ }
+ if (bat_voltage >= vbat_vs_capacity_look_up[access_index][0][0]) {
+ *capacity = 100;
+ return 0;
+ }
+ if (bat_voltage <= vbat_vs_capacity_look_up[access_index]
+ [DA9052_LOOK_UP_TABLE_SIZE - 1][0]) {
+ *capacity = 0;
+ return 0;
+ }
+ flag = 0;
+
+ for (index = 0; index < (DA9052_LOOK_UP_TABLE_SIZE-1); index++) {
+ if ((bat_voltage <=
+ vbat_vs_capacity_look_up[access_index][index][0]) &&
+ (bat_voltage >=
+ vbat_vs_capacity_look_up[access_index][index + 1][0])) {
+ vbat_upper =
+ vbat_vs_capacity_look_up[access_index][index][0];
+ vbat_lower =
+ vbat_vs_capacity_look_up[access_index][index + 1][0];
+ level_upper =
+ vbat_vs_capacity_look_up[access_index][index][1];
+ level_lower =
+ vbat_vs_capacity_look_up[access_index][index + 1][1];
+ flag = 1;
+ break;
+ }
+ }
+ if (!flag)
+ return -EIO;
+
+ *capacity = interpolated(vbat_lower, vbat_upper, level_lower,
+ level_upper, bat_voltage);
+
+ return 0;
+}
+
+static int da9052_battery_check_health(struct da9052_battery *battery,
+ int *health)
+{
+ int ret, bat_illegal, capacity;
+
+ ret = da9052_battery_check_presence(battery, &bat_illegal);
+ if (ret < 0)
+ return ret;
+
+ if (bat_illegal) {
+ battery->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return 0;
+ }
+
+ if (battery->health != POWER_SUPPLY_HEALTH_OVERHEAT) {
+ ret = da9052_battery_read_capacity(battery, &capacity);
+ if (ret < 0)
+ return ret;
+ if (capacity < DA9052_BAT_CAPACITY_LIMIT_LOW)
+ battery->health = POWER_SUPPLY_HEALTH_DEAD;
+ else
+ battery->health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ *health = battery->health;
+
+ return 0;
+}
+
+static irqreturn_t da9052_bat_irq(int irq, void *data)
+{
+ struct da9052_battery *battery = (struct da9052_battery *)data;
+
+ irq -= battery->da9052->irq_base;
+
+ if (irq == DA9052_IRQ_CHGEND)
+ battery->status = POWER_SUPPLY_STATUS_FULL;
+ else
+ da9052_battery_check_status(battery, NULL);
+
+ if (irq == DA9052_IRQ_CHGEND || irq == DA9052_IRQ_DCIN ||
+ irq == DA9052_IRQ_VBUS || irq == DA9052_IRQ_TBAT) {
+ power_supply_changed(&battery->psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int da9052_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret, illegal;
+ struct da9052_battery *battery = container_of(psy,
+ struct da9052_battery, psy);
+
+ ret = da9052_battery_check_presence(battery, &illegal);
+ if (ret < 0)
+ return ret;
+
+ if (illegal && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = da9052_battery_check_status(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval =
+ (battery->charger_type == DA9052_NOCHARGER) ? 0 : 1;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = da9052_battery_check_presence(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = da9052_battery_check_health(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = DA9052_BAT_CUTOFF_VOLT * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = da9052_battery_read_volt(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = da9052_battery_read_current(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = da9052_battery_read_capacity(battery, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = da9052_adc_temperature_read(battery->da9052);
+ ret = val->intval;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static enum power_supply_property da9052_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static struct power_supply template_battery = {
+ .name = "da9052-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = da9052_bat_props,
+ .num_properties = ARRAY_SIZE(da9052_bat_props),
+ .get_property = da9052_bat_get_property,
+};
+
+static const char *da9052_bat_irqs[] = {
+ "BATT TEMP",
+ "DCIN DET",
+ "DCIN REM",
+ "VBUS DET",
+ "VBUS REM",
+ "CHG END",
+};
+
+static s32 __devinit da9052_bat_probe(struct platform_device *pdev)
+{
+ struct da9052_pdata *pdata;
+ struct da9052_battery *battery;
+ int ret, irq, i;
+
+ battery = kzalloc(sizeof(struct da9052_battery), GFP_KERNEL);
+ if (!battery)
+ return -ENOMEM;
+
+ battery->da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = battery->da9052->dev->platform_data;
+
+ battery->psy = template_battery;
+ if (pdata != NULL && pdata->use_for_apm)
+ battery->psy.use_for_apm = pdata->use_for_apm;
+ battery->charger_type = DA9052_NOCHARGER;
+ battery->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ battery->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ ret = request_threaded_irq(battery->da9052->irq_base + irq,
+ NULL, da9052_bat_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ da9052_bat_irqs[i], battery);
+ if (ret != 0) {
+ dev_err(battery->da9052->dev,
+ "DA9052 failed to request %s IRQ %d: %d\n",
+ da9052_bat_irqs[i], irq, ret);
+ goto err;
+ }
+ }
+
+ ret = power_supply_register(&pdev->dev, &battery->psy);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ for (; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ free_irq(irq, battery);
+ }
+ kfree(battery);
+ return ret;
+}
+static int __devexit da9052_bat_remove(struct platform_device *pdev)
+{
+ int i, irq;
+ struct da9052_battery *battery = platform_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
+ free_irq(irq, battery);
+ }
+ power_supply_unregister(&battery->psy);
+
+ return 0;
+}
+
+static struct platform_driver da9052_bat_driver = {
+ .probe = da9052_bat_probe,
+ .remove = __devexit_p(da9052_bat_remove),
+ .driver = {
+ .name = "da9052-bat",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9052_bat_init(void)
+{
+ return platform_driver_register(&da9052_bat_driver);
+}
+module_init(da9052_bat_init);
+
+static void __exit da9052_bat_exit(void)
+{
+ platform_driver_unregister(&da9052_bat_driver);
+}
+module_exit(da9052_bat_exit);
+
+MODULE_DESCRIPTION("DA9052 BAT Device Driver");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-bat");
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 04/11] Power: DA9052 Battery driver v4
2011-11-18 9:24 [PATCH 04/11] Power: DA9052 Battery driver v4 Ashish Jangam
@ 2011-11-24 23:28 ` Anton Vorontsov
0 siblings, 0 replies; 6+ messages in thread
From: Anton Vorontsov @ 2011-11-24 23:28 UTC (permalink / raw)
To: Ashish Jangam
Cc: Mark Brown, linaro-dev@lists.linaro.org, dwmw2@infradead.org,
linux-kernel@vger.kernel.org, Dajun
On Fri, Nov 18, 2011 at 02:54:09PM +0530, Ashish Jangam wrote:
> Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver
> for definitions and methods.
>
> Tested on Samsung SMDK6410 board with DA9052-BC and DA9053-BA evaluation boards.
>
> Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> ---
Ashish,
Much thanks for your work! The code itself looks OK to me. But there are
some issues regarding readability and coding style. No big deal, but
please consider fixing.
[...]
[..]
> +static int da9052_battery_check_status(struct da9052_battery *battery,
> + int *status)
> +{
> + uint8_t v[2] = {0, 0};
> + uint8_t bat_status, chg_end;
In kernel code we try to use 'uXX' types. I.e. u8 here.
> + int ret, chg_current, chg_end_current;
Each declaration should be on its own line.
int ret;
int chr_current;
> +
> + ret = da9052_group_read(battery->da9052, DA9052_STATUS_A_REG, 2, v);
> + if (ret < 0)
> + return ret;
> +
> + bat_status = v[0];
> + chg_end = v[1];
> +
> + /* Preference to WALL(DCIN) charger unit */
> + if (((bat_status & DA9052_STATUSA_DCINSEL) &&
> + (bat_status & DA9052_STATUSA_DCINDET))
> + ||
> + ((bat_status & DA9052_STATUSA_VBUSSEL) &&
> + (bat_status & DA9052_STATUSA_VBUSDET))
> + ) {
I can't parse it.
Maybe
bool dcinsel = bat_status & DA9052_STATUSA_DCINSEL;
bool dcindet = bat_status & DA9052_STATUSA_DCINDET;
bool vbussel = bat_status & DA9052_STATUSA_VBUSSEL;
bool vbusdet = bat_status & DA9052_STATUSA_VBUSDET;
bool dc = dcinsel && dcindet;
bool vbus = vbussel && vbusdet;
if (dc || vbus) {
...
} else if (dcindet || vbusdet) {
...
} else {
...
}
Note that it does not add a single line of code, but things become
much more readable.
> + battery->charger_type = DA9052_CHARGER;
> +
> + /* If charging end flag is set and Charging current is greater
> + * than charging end limit then battery is charging
> + */
> + if ((chg_end & DA9052_STATUSB_CHGEND) != 0) {
> + ret = da9052_battery_read_current(battery,
> + &chg_current);
> + if (ret < 0)
> + return ret;
> + ret = da9052_battery_read_end_current(battery,
> + &chg_end_current);
> + if (ret < 0)
> + return ret;
> +
> + if (chg_current >= chg_end_current)
> + battery->status = POWER_SUPPLY_STATUS_CHARGING;
> + else
> + battery->status =
> + POWER_SUPPLY_STATUS_NOT_CHARGING;
> + }
> + /* If Charging end flag is cleared then battery is charging */
> + else
> + battery->status = POWER_SUPPLY_STATUS_CHARGING;
> + } else if (bat_status & DA9052_STATUSA_DCINDET ||
> + bat_status & DA9052_STATUSA_VBUSDET) {
> + battery->charger_type = DA9052_CHARGER;
> + battery->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + } else {
> + battery->charger_type = DA9052_NOCHARGER;
> + battery->status = POWER_SUPPLY_STATUS_DISCHARGING;
> + }
> +
> + if (status != NULL)
> + *status = battery->status;
> + return 0;
> +}
[...]
> +unsigned char select_temperature(unsigned char temp_index, int bat_temperature)
> +{
> + int temp_temperature;
> +
> + temp_temperature = (temperature_lookup_ref[temp_index] +
> + temperature_lookup_ref[temp_index + 1]) / 2;
> +
> + if (bat_temperature >= temp_temperature) {
> + temp_index += 1;
> + return temp_index;
> + } else
should be "} else {", per coding style.
> + return temp_index;
> +}
> +
> +static int da9052_battery_read_capacity(struct da9052_battery *battery,
> + int *capacity)
> +{
> + int bat_temperature, bat_voltage;
> + int vbat_lower, vbat_upper, level_upper, level_lower;
> + int ret, flag, index, access_index = 0;
> +
> + ret = da9052_battery_read_volt(battery, &bat_voltage);
> + if (ret < 0)
> + return ret;
> +
> + bat_temperature = da9052_adc_temperature_read(battery->da9052);
> + if (bat_temperature < 0)
> + return bat_temperature;
> +
> + for (index = 0; index < (DA9052_NO_OF_LOOKUP_TABLE - 1); index++) {
> + if (bat_temperature <= temperature_lookup_ref[0]) {
> + access_index = 0;
> + break;
> + } else if (bat_temperature >
> + temperature_lookup_ref[DA9052_NO_OF_LOOKUP_TABLE]) {
> + access_index = DA9052_NO_OF_LOOKUP_TABLE - 1;
> + break;
> + } else if ((bat_temperature >= temperature_lookup_ref[index]) &&
> + (bat_temperature >= temperature_lookup_ref[index + 1]
> + )) {
Braces placement is weird. The longer identifiers you use, the less
columns you have. Maybe try to use shorter variable names?
> + access_index = select_temperature(index,
> + bat_temperature);
> + break;
> + }
> + }
> + if (bat_voltage >= vbat_vs_capacity_look_up[access_index][0][0]) {
> + *capacity = 100;
> + return 0;
> + }
> + if (bat_voltage <= vbat_vs_capacity_look_up[access_index]
> + [DA9052_LOOK_UP_TABLE_SIZE - 1][0]) {
> + *capacity = 0;
> + return 0;
> + }
> + flag = 0;
> +
> + for (index = 0; index < (DA9052_LOOK_UP_TABLE_SIZE-1); index++) {
> + if ((bat_voltage <=
> + vbat_vs_capacity_look_up[access_index][index][0]) &&
> + (bat_voltage >=
> + vbat_vs_capacity_look_up[access_index][index + 1][0])) {
> + vbat_upper =
> + vbat_vs_capacity_look_up[access_index][index][0];
> + vbat_lower =
> + vbat_vs_capacity_look_up[access_index][index + 1][0];
> + level_upper =
> + vbat_vs_capacity_look_up[access_index][index][1];
> + level_lower =
> + vbat_vs_capacity_look_up[access_index][index + 1][1];
> + flag = 1;
> + break;
I can't parse it.
You don't have to use 24-character variable name to document your
code. For example, you can rename vbat_vs_capacity_look_up to "vc_tbl"
and just add a comment that the table is used to lookup voltage via
capacity.
s/vbat_vs_capacity_look_up/vc_tbl/g
s/access_index/i/g
s/index/j/g
[...]
> +static irqreturn_t da9052_bat_irq(int irq, void *data)
> +{
> + struct da9052_battery *battery = (struct da9052_battery *)data;
Needless cast.
Thanks!
--
Anton Vorontsov
Email: cbouatmailru@gmail.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-11-24 23:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-11-18 9:24 [PATCH 04/11] Power: DA9052 Battery driver v4 Ashish Jangam
2011-11-24 23:28 ` Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2011-10-19 14:18 [Patch 04/11]Power: DA9052 battery " Ashish Jangam
2011-11-08 8:52 ` Ashish Jangam
2011-11-08 10:23 ` Mark Brown
2011-11-08 10:28 ` Ashish Jangam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox