* printks messed up in 3.6-rc2+git
@ 2012-08-19 7:30 Meelis Roos
2012-08-19 9:47 ` Ming Lei
2012-08-19 9:49 ` Markus Trippelsdorf
0 siblings, 2 replies; 3+ messages in thread
From: Meelis Roos @ 2012-08-19 7:30 UTC (permalink / raw)
To: Linux Kernel list
1. Lots of broken HPET messages scattered in PCI prontks like this:
pcieport 0000:00:0c.0: Force enabled HPET at 0x%lx
irq 40 for MSI/MSI-X
pcieport 0000:00:0d.0: Force enabled HPET at 0x%lx
irq 41 for MSI/MSI-X
pcieport 0000:00:0e.0: Force enabled HPET at 0x%lx
irq 42 for MSI/MSI-X
pcieport 0000:00:0f.0: Force enabled HPET at 0x%lx
irq 43 for MSI/MSI-X
2. Lots of \0x10 in different printk lines, like this:
pci 0000:00:05.0: \x010Enabling HT MSI Mapping
pci 0000:00:05.1: \x010Enabling HT MSI Mapping
pci 0000:00:05.2: \x010Enabling HT MSI Mapping
pci 0000:00:06.0: \x010Enabling HT MSI Mapping
pci 0000:00:06.1: \x010Enabling HT MSI Mapping
pci 0000:00:08.0: \x010Enabling HT MSI Mapping
pci 0000:00:09.0: \x010Enabling HT MSI Mapping
pci 0000:00:0c.0: \x010Enabling HT MSI Mapping
pci 0000:00:0d.0: \x010Enabling HT MSI Mapping
pci 0000:00:0e.0: \x010Enabling HT MSI Mapping
pci 0000:00:0f.0: \x010Enabling HT MSI Mapping
and this:
usb 2-8: \x010new low-speed USB device number 5 using ohci_hcd
usb 2-8: \x010New USB device found, idVendor=0592, idProduct=0002
usb 2-8: \x010New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: %s: Can't disable non-U1 or U2 state.
3. Many more %s and runtogether lines:
sata_nv 0000:00:05.1: %s: ino %lu, used %d with only %d reserved data blocksUsing SWNCQ mode
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: printks messed up in 3.6-rc2+git
2012-08-19 7:30 printks messed up in 3.6-rc2+git Meelis Roos
@ 2012-08-19 9:47 ` Ming Lei
2012-08-19 9:49 ` Markus Trippelsdorf
1 sibling, 0 replies; 3+ messages in thread
From: Ming Lei @ 2012-08-19 9:47 UTC (permalink / raw)
To: Meelis Roos; +Cc: Linux Kernel list
On Sun, Aug 19, 2012 at 3:30 PM, Meelis Roos <mroos@linux.ee> wrote:
> 1. Lots of broken HPET messages scattered in PCI prontks like this:
> pcieport 0000:00:0c.0: Force enabled HPET at 0x%lx
> irq 40 for MSI/MSI-X
> pcieport 0000:00:0d.0: Force enabled HPET at 0x%lx
> irq 41 for MSI/MSI-X
> pcieport 0000:00:0e.0: Force enabled HPET at 0x%lx
> irq 42 for MSI/MSI-X
> pcieport 0000:00:0f.0: Force enabled HPET at 0x%lx
> irq 43 for MSI/MSI-X
>
> 2. Lots of \0x10 in different printk lines, like this:
>
> pci 0000:00:05.0: \x010Enabling HT MSI Mapping
> pci 0000:00:05.1: \x010Enabling HT MSI Mapping
> pci 0000:00:05.2: \x010Enabling HT MSI Mapping
> pci 0000:00:06.0: \x010Enabling HT MSI Mapping
> pci 0000:00:06.1: \x010Enabling HT MSI Mapping
> pci 0000:00:08.0: \x010Enabling HT MSI Mapping
> pci 0000:00:09.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0c.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0d.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0e.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0f.0: \x010Enabling HT MSI Mapping
> and this:
> usb 2-8: \x010new low-speed USB device number 5 using ohci_hcd
> usb 2-8: \x010New USB device found, idVendor=0592, idProduct=0002
> usb 2-8: \x010New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-8: %s: Can't disable non-U1 or U2 state.
>
> 3. Many more %s and runtogether lines:
>
> sata_nv 0000:00:05.1: %s: ino %lu, used %d with only %d reserved data blocksUsing SWNCQ mode
For me, it is kinds of like below:
[ 15.379760] usb 1-1.2.3: mminit::memmap_init Initialising map node
%d zone %lu pfns %lu -> %lu
[ 15.379760] default language 0x0409
[ 15.393768] usb 1-1.2.3: mminit::memmap_init Initialising map node
%d zone %lu pfns %lu -> %lu
[ 15.393768] udev 6, busnum 1, minor = 5
[ 15.407012] usb 1-1.2.3: Oops - undefined instructionNew USB device
found, idVendor=0cf3, idProduct=9271
[ 15.417175] usb 1-1.2.3: Oops - undefined instructionNew USB device
strings: Mfr=16, Product=32, SerialNumbe
r=48
[ 15.430145] usb 1-1.2.3: Oops - undefined instructionProduct: USB2.0 WLAN
[ 15.440643] usb 1-1.2.3: Oops - undefined instructionManufacturer: ATHEROS
[ 15.447906] usb 1-1.2.3: Oops - undefined instructionSerialNumber: 12345
Thanks,
--
Ming Lei
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: printks messed up in 3.6-rc2+git
2012-08-19 7:30 printks messed up in 3.6-rc2+git Meelis Roos
2012-08-19 9:47 ` Ming Lei
@ 2012-08-19 9:49 ` Markus Trippelsdorf
1 sibling, 0 replies; 3+ messages in thread
From: Markus Trippelsdorf @ 2012-08-19 9:49 UTC (permalink / raw)
To: Meelis Roos; +Cc: Linux Kernel list
On 2012.08.19 at 10:30 +0300, Meelis Roos wrote:
> 1. Lots of broken HPET messages scattered in PCI prontks like this:
> pcieport 0000:00:0c.0: Force enabled HPET at 0x%lx
> irq 40 for MSI/MSI-X
> pcieport 0000:00:0d.0: Force enabled HPET at 0x%lx
> irq 41 for MSI/MSI-X
> pcieport 0000:00:0e.0: Force enabled HPET at 0x%lx
> irq 42 for MSI/MSI-X
> pcieport 0000:00:0f.0: Force enabled HPET at 0x%lx
> irq 43 for MSI/MSI-X
>
> 2. Lots of \0x10 in different printk lines, like this:
>
> pci 0000:00:05.0: \x010Enabling HT MSI Mapping
> pci 0000:00:05.1: \x010Enabling HT MSI Mapping
> pci 0000:00:05.2: \x010Enabling HT MSI Mapping
> pci 0000:00:06.0: \x010Enabling HT MSI Mapping
> pci 0000:00:06.1: \x010Enabling HT MSI Mapping
> pci 0000:00:08.0: \x010Enabling HT MSI Mapping
> pci 0000:00:09.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0c.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0d.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0e.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0f.0: \x010Enabling HT MSI Mapping
> and this:
> usb 2-8: \x010new low-speed USB device number 5 using ohci_hcd
> usb 2-8: \x010New USB device found, idVendor=0592, idProduct=0002
> usb 2-8: \x010New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-8: %s: Can't disable non-U1 or U2 state.
>
> 3. Many more %s and runtogether lines:
>
> sata_nv 0000:00:05.1: %s: ino %lu, used %d with only %d reserved data blocksUsing SWNCQ mode
Yes.
Fix is already queued up:
http://git.kernel.org/?p=linux/kernel/git/gregkh/driver-core.git;a=commitdiff;h=ebdc82899ec5ed35af1c79ed6a4eeda69dad9b90
--
Markus
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-08-19 9:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-19 7:30 printks messed up in 3.6-rc2+git Meelis Roos
2012-08-19 9:47 ` Ming Lei
2012-08-19 9:49 ` Markus Trippelsdorf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox