From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: kuninori.morimoto.gx@renesas.com, linux-sh@vger.kernel.org,
benh@kernel.crashing.org, grant.likely@secretlab.ca,
horms@verge.net.au, Magnus Damm <magnus.damm@gmail.com>,
tglx@linutronix.de
Subject: [PATCH 02/05] irqchip: intc-irqpin: Cache mapped IRQ
Date: Tue, 26 Feb 2013 20:58:54 +0900 [thread overview]
Message-ID: <20130226115854.5630.51016.sendpatchset@w520> (raw)
In-Reply-To: <20130226115834.5630.45471.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Cache IRQ in domain_irq variable instead of
making use of irq_find_mapping(). While at it
rename the irq variable to requested_irq.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Thanks to Thomas Gleixner for this suggestion.
drivers/irqchip/irq-renesas-intc-irqpin.c | 30 +++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
--- 0003/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ work/drivers/irqchip/irq-renesas-intc-irqpin.c 2013-02-26 19:29:56.000000000 +0900
@@ -61,7 +61,8 @@ struct intc_irqpin_iomem {
struct intc_irqpin_irq {
int hw_irq;
- int irq;
+ int requested_irq;
+ int domain_irq;
struct intc_irqpin_priv *p;
};
@@ -171,8 +172,7 @@ static int intc_irqpin_set_sense(struct
static void intc_irqpin_dbg(struct intc_irqpin_irq *i, char *str)
{
dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n",
- str, i->irq, i->hw_irq,
- irq_find_mapping(i->p->irq_domain, i->hw_irq));
+ str, i->requested_irq, i->hw_irq, i->domain_irq);
}
static void intc_irqpin_irq_enable(struct irq_data *d)
@@ -196,7 +196,7 @@ static void intc_irqpin_irq_disable(stru
static void intc_irqpin_irq_enable_force(struct irq_data *d)
{
struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
- int irq = p->irq[irqd_to_hwirq(d)].irq;
+ int irq = p->irq[irqd_to_hwirq(d)].requested_irq;
intc_irqpin_irq_enable(d);
irq_get_chip(irq)->irq_unmask(irq_get_irq_data(irq));
@@ -205,7 +205,7 @@ static void intc_irqpin_irq_enable_force
static void intc_irqpin_irq_disable_force(struct irq_data *d)
{
struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
- int irq = p->irq[irqd_to_hwirq(d)].irq;
+ int irq = p->irq[irqd_to_hwirq(d)].requested_irq;
irq_get_chip(irq)->irq_mask(irq_get_irq_data(irq));
intc_irqpin_irq_disable(d);
@@ -246,7 +246,7 @@ static irqreturn_t intc_irqpin_irq_handl
if (intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE) & bit) {
intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, ~bit);
intc_irqpin_dbg(i, "demux2");
- generic_handle_irq(irq_find_mapping(p->irq_domain, i->hw_irq));
+ generic_handle_irq(i->domain_irq);
return IRQ_HANDLED;
}
return IRQ_NONE;
@@ -257,6 +257,9 @@ static int intc_irqpin_irq_domain_map(st
{
struct intc_irqpin_priv *p = h->host_data;
+ p->irq[hw].domain_irq = virq;
+ p->irq[hw].hw_irq = hw;
+
intc_irqpin_dbg(&p->irq[hw], "map");
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
@@ -314,9 +317,8 @@ static int intc_irqpin_probe(struct plat
if (!irq)
break;
- p->irq[k].hw_irq = k;
p->irq[k].p = p;
- p->irq[k].irq = irq->start;
+ p->irq[k].requested_irq = irq->start;
}
p->number_of_irqs = k;
@@ -389,7 +391,8 @@ static int intc_irqpin_probe(struct plat
/* request and set priority on interrupts one by one */
for (k = 0; k < p->number_of_irqs; k++) {
- if (request_irq(p->irq[k].irq, intc_irqpin_irq_handler,
+ if (request_irq(p->irq[k].requested_irq,
+ intc_irqpin_irq_handler,
0, name, &p->irq[k])) {
dev_err(&pdev->dev, "failed to request low IRQ\n");
ret = -ENOENT;
@@ -402,17 +405,16 @@ static int intc_irqpin_probe(struct plat
/* warn in case of mismatch if irq base is specified */
if (p->config.irq_base) {
- k = irq_find_mapping(p->irq_domain, 0);
- if (p->config.irq_base != k)
+ if (p->config.irq_base != p->irq[0].domain_irq)
dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n",
- p->config.irq_base, k);
+ p->config.irq_base, p->irq[0].domain_irq);
}
return 0;
err3:
for (; k >= 0; k--)
- free_irq(p->irq[k - 1].irq, &p->irq[k - 1]);
+ free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]);
irq_domain_remove(p->irq_domain);
err2:
@@ -430,7 +432,7 @@ static int intc_irqpin_remove(struct pla
int k;
for (k = 0; k < p->number_of_irqs; k++)
- free_irq(p->irq[k].irq, &p->irq[k]);
+ free_irq(p->irq[k].requested_irq, &p->irq[k]);
irq_domain_remove(p->irq_domain);
next prev parent reply other threads:[~2013-02-26 11:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-26 11:58 [PATCH 00/05] irqchip: Renesas INTC External IRQ pin v2 update Magnus Damm
2013-02-26 11:58 ` [PATCH 01/05] irqchip: intc-irqpin: Whitespace fixes Magnus Damm
2013-02-26 11:58 ` Magnus Damm [this message]
2013-02-26 11:59 ` [PATCH 03/05] irqchip: intc-irqpin: Add force comments Magnus Damm
2013-02-26 11:59 ` [PATCH 04/05] irqchip: intc-irqpin: Make use of devm functions Magnus Damm
2013-02-26 11:59 ` [PATCH 05/05] irqchip: intc-irqpin: GPL header for platform data Magnus Damm
2013-02-26 12:14 ` [PATCH 00/05] irqchip: Renesas INTC External IRQ pin v2 update Simon Horman
2013-02-26 17:47 ` Thomas Gleixner
2013-03-01 9:41 ` Simon Horman
2013-03-01 15:03 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130226115854.5630.51016.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=grant.likely@secretlab.ca \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox