* [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
@ 2013-05-07 16:02 ` Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3 Arnd Bergmann
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 16:02 UTC (permalink / raw)
To: torvalds; +Cc: arm, linux-arm-kernel, linux-kernel, Arnd Bergmann
These patches are all for Renesas shmobile, and depend on the earlier
pinctrl updates. Remarkably, this adds support for three new SoCs:
r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is
for pinctrl (using the new subsystem) and for clocks (not yet using the
common clock subsystem). The latter will have to get converted in one
of the upcoming releases, but shmobile is not ready for that yet.
The series also contains Renesas shmobile board changes, adding one
board file for each of the three new SoCs. These boards are using a
mix of classic and device-tree based probing, as there is still a lot of
infrastructure in shmobile that has not been converted to DT yet. Once
those are resolved to the degree that no board specific setup code is
needed, they can get folded into the respective SoC setup files.
Conflicts:
- A line added in board-armadillo800eva.c conflicts with a
changed line.
-------------------------------------------------------------
The following changes since commit
150a8dc Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/soc-for-linus-2
you to fetch changes up to
9251c6c Merge tag 'renesas-boards-lager-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards2
-------------------------------------------------------------
Arnd Bergmann (3):
Merge tag 'renesas-defconfig-bockw-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/boards2
Merge tag 'renesas-boards-bockw-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/boards2
Merge tag 'soc-for-linus-2' into for-next
Bastian Hecht (1):
ARM: shmobile: r8a7740: Migrate from INTC to GIC
Guennadi Liakhovetski (9):
ARM: shmobile: sh73a0: wait for completion when kicking the clock
ARM: shmobile: sh73a0: add irqpin DT nodes
ARM: shmobile: sh73a0: add a TWD clock
ARM: shmobile: kzm9g-reference: add ethernet support
ARM: shmobile: mackerel: SDHI resources do not have to be numbered
ARM: shmobile: mackerel: remove OCR masks, where regulators are used
ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
ARM: shmobile: mackerel: add interrupt names for SDHI0
ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
Kuninori Morimoto (21):
ARM: shmobile: add R8A7778 basis support
ARM: shmobile: r8a7778 SCIF support
ARM: shmobile: r8a73a4: add thermal driver support
ARM: shmobile: sh73a0: remove DIV4_ZT* clocks
ARM: shmobile: sh7372: remove DIV4_ZT* clocks
ARM: shmobile: add struct clk_ratio and fixed ratio clock macro
ARM: shmobile: sh7372: use fixed ratio clock
ARM: shmobile: sh73a0: use fixed ratio clock
ARM: shmobile: r8a7740: tidyup comment/implementation mismatch
ARM: shmobile: r8a7740: use fixed ratio clock
ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock
ARM: shmobile: sh7372: move global functions to sh7372.h
ARM: shmobile: sh73a0: move global functions to sh73a0.h
ARM: shmobile: r8a7740: move global functions to r8a7740.h
ARM: shmobile: r8a7779: move global functions to r8a7779.h
ARM: shmobile: add R-Car M1A Bock-W platform support
ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
ARM: shmobile: bockw: enable SMSC ethernet on defconfig
ARM: shmobile: bockw: add SMSC ethernet support
ARM: shmobile: bockw: enable network settings on bootargs
Laurent Pinchart (14):
sh-pfc: Fix compiler warning when BUG()
sh: sh7269: Fix compilation by adding missing includes
sh-pfc: r8a7779: Remove function GPIOs
sh-pfc: r8a7779: Don't use GPIO enum entries
ARM: shmobile: r8a7779: Remove all GPIOs
gpio-rcar: Add pinctrl support
ARM: shmobile: marzen: Add GPIO LEDs
sh-pfc: Make function GPIOs support optional
sh-pfc: Make GPIO support optional
sh-pfc: Skip gpiochip registration when no GPIO resource is found
sh-pfc: Configure pins as GPIOs at request time when handled externally
ARM: shmobile: r8a7779: Register GPIO devices
sh-pfc: r8a7779: Remove GPIO data
sh-pfc: r8a7779: Split DU input and output pixel clocks
Magnus Damm (30):
ARM: shmobile: Initial r8a73a4 SoC support V3
ARM: shmobile: r8a73a4 SCIF support V3
ARM: shmobile: r8a73a4 IRQC support V2
ARM: shmobile: r8a73a4 PFC support
ARM: shmobile: Disallow PINCTRL without GPIOLIB
ARM: shmobile: Initial r8a7790 SoC support
ARM: shmobile: r8a7790 SCIF support
ARM: shmobile: r8a7790 IRQC support
ARM: shmobile: r8a7790 PFC support
gpio: Renesas R-Car GPIO driver V3
sh-pfc: Add r8a73a4 pinmux support
sh-pfc: r8a73a4: Support sparse GPIO numbers
sh-pfc: r8a73a4: GPIO IRQ support
sh-pfc: r8a73a4: Add bias (pull-up/down) pinconf support
sh-pfc: r8a73a4: Add SCIF pin groups and functions
sh-pfc: r8a73a4: Add IRQC pin groups and functions
sh-pfc: r8a73a4: Remove SCIF function GPIOS
sh-pfc: r8a73a4: Remove IRQC function GPIOS
ARM: shmobile: r8a73a4: Remove SCIF function GPIOs
ARM: shmobile: r8a73a4: Remove IRQC function GPIOs
sh-pfc: r8a73a4: Remove function GPIOs
ARM: shmobile: r8a73a4: Remove all GPIO enums
sh-pfc: r8a73a4: Remove unused GPIO bias data
ARM: shmobile: APE6EVM base support
ARM: shmobile: APE6EVM PFC support
ARM: shmobile: APE6EVM LAN9220 support
ARM: shmobile: Initial r8a7790 Lager board support
ARM: shmobile: Add second I/O range for r8a7790 PFC
ARM: shmobile: force enable of r8a7790 arch timer
ARM: shmobile: use r8a7790 timer setup code on Lager
Olof Johansson (2):
Merge tag 'renesas-boards3-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/boards2
Merge tag 'renesas-boards-lager-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/boards2
Sergei Shtylyov (1):
ARM: shmobile: R8A7778: add Ether support
Simon Horman (5):
Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base
Merge branch 'soc' into pinmux-base
Merge tag 'renesas-pinmux2-for-v3.10' into boards-base
Merge branch 'soc-r8a7778' into boards-bockw-base
Merge branch 'soc-r8a7790' into boards-lager
Takashi YOSHII (2):
ARM: shmobile: r8a73a4 SoC 64-bit DT support
ARM: shmobile: r8a7790 SoC 64-bit DT support
arch/arm/Kconfig | 2 +-
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 52 +
arch/arm/boot/dts/r8a73a4.dtsi | 94 +
arch/arm/boot/dts/r8a7778-bockw.dts | 32 +
arch/arm/boot/dts/r8a7778.dtsi | 35 +
arch/arm/boot/dts/r8a7790-lager.dts | 31 +
arch/arm/boot/dts/r8a7790.dtsi | 63 +
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 13 +
arch/arm/boot/dts/sh73a0.dtsi | 81 +
arch/arm/configs/bockw_defconfig | 94 +
arch/arm/mach-shmobile/Kconfig | 48 +-
arch/arm/mach-shmobile/Makefile | 6 +
arch/arm/mach-shmobile/board-ape6evm.c | 94 +
arch/arm/mach-shmobile/board-armadillo800eva.c | 35 +-
arch/arm/mach-shmobile/board-bockw.c | 81 +
arch/arm/mach-shmobile/board-lager.c | 46 +
arch/arm/mach-shmobile/board-mackerel.c | 111 +-
arch/arm/mach-shmobile/board-marzen.c | 32 +
arch/arm/mach-shmobile/clock-r8a73a4.c | 115 ++
arch/arm/mach-shmobile/clock-r8a7740.c | 114 +-
arch/arm/mach-shmobile/clock-r8a7778.c | 107 +
arch/arm/mach-shmobile/clock-r8a7779.c | 196 +-
arch/arm/mach-shmobile/clock-r8a7790.c | 93 +
arch/arm/mach-shmobile/clock-sh7372.c | 50 +-
arch/arm/mach-shmobile/clock-sh73a0.c | 115 +-
arch/arm/mach-shmobile/clock.c | 13 +
arch/arm/mach-shmobile/include/mach/clock.h | 39 +
arch/arm/mach-shmobile/include/mach/common.h | 54 -
arch/arm/mach-shmobile/include/mach/r8a73a4.h | 8 +
arch/arm/mach-shmobile/include/mach/r8a7740.h | 9 +
arch/arm/mach-shmobile/include/mach/r8a7778.h | 32 +
arch/arm/mach-shmobile/include/mach/r8a7779.h | 330 +--
arch/arm/mach-shmobile/include/mach/r8a7790.h | 9 +
arch/arm/mach-shmobile/include/mach/sh7372.h | 12 +
arch/arm/mach-shmobile/include/mach/sh73a0.h | 15 +
arch/arm/mach-shmobile/intc-r8a7740.c | 641 +-----
arch/arm/mach-shmobile/setup-r8a73a4.c | 202 ++
arch/arm/mach-shmobile/setup-r8a7740.c | 192 +-
arch/arm/mach-shmobile/setup-r8a7778.c | 244 +++
arch/arm/mach-shmobile/setup-r8a7779.c | 58 +-
arch/arm/mach-shmobile/setup-r8a7790.c | 150 ++
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2 +
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-rcar.c | 396 ++++
drivers/pinctrl/sh-pfc/Kconfig | 5 +
drivers/pinctrl/sh-pfc/Makefile | 1 +
drivers/pinctrl/sh-pfc/core.c | 41 +-
drivers/pinctrl/sh-pfc/core.h | 1 +
drivers/pinctrl/sh-pfc/gpio.c | 45 +-
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 2587 ++++++++++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 64 +-
drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 479 +----
drivers/pinctrl/sh-pfc/pinctrl.c | 11 +
include/linux/platform_data/gpio-rcar.h | 26 +
56 files changed, 5588 insertions(+), 1828 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2 Arnd Bergmann
@ 2013-05-07 16:02 ` Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc device tree changes, part 2 Arnd Bergmann
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 16:02 UTC (permalink / raw)
To: torvalds; +Cc: arm, linux-arm-kernel, linux-kernel, Arnd Bergmann
This is the third and smallest of the SoC specific updates.
Changes include:
* SMP support for the Xilinx zynq platform
* Smaller imx changes
* LPAE support for mvebu
* Moving the orion5x, kirkwood, dove and mvebu platforms
to a common "mbus" driver for their internal devices.
It would be good to get feedback on the location of the "mbus"
driver. Since this is used on multiple platforms may potentially
get shared with other architectures (powerpc and arm64), it
was moved to drivers/bus/. We expect other similar drivers to
get moved to the same place in order to avoid creating more
top-level directories under drivers/ or cluttering up the
messy drivers/misc/ even more.
Conflicts:
- drivers/gpio/gpio-pl061.c had a trivial add/add conflict that
got resolved in two different ways, both of which are ok.
-------------------------------------------------------------
The following changes since commit
48f934c Merge tag 'soc-for-linus-2' into for-next
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/soc-for-linus-3
you to fetch changes up to
5c5f042 ARM: imx: reset_controller may be disabled
-------------------------------------------------------------
Anson Huang (3):
ARM: imx: enable anatop suspend/resume
ARM: imx: enable periphery well bias for suspend
ARM: imx: enable RBC to support anatop LPM mode
Arnd Bergmann (6):
Merge branch 'zynq/core-smp' of git://git.xilinx.com/linux-xlnx into next/soc2
Merge branch 'gic/cleanup' into next/soc2
Merge tag 'renesas-soc-r8a7779-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-soc-r8a7778-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
ARM: imx: reset_controller may be disabled
Merge tag 'soc-for-linus-3' into for-next
Fabio Estevam (3):
ARM: mach-imx: anatop: Include "common.h"
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
Gregory CLEMENT (1):
ARM: mvebu: Limit the DMA zone when LPAE is selected
Gwenhael Goavec-Merou (1):
ARM: imx1: mm: add call to mxc_device_init
Jason Cooper (2):
Merge tag 'tags/cleanup_for_v3.10' into mvebu/soc
Merge tag 'tags/drivers_for_v3.10' into mvebu/soc
Kuninori Morimoto (2):
ARM: shmobile: r8a7779: add each clocks ratio on comment area
sh-pfc: r8a7779: tidyup intc_irq3_b typo
Lior Amsalem (1):
ARM: mvebu: Align the internal registers virtual base to support LPAE
Markus Pargmann (1):
ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0
Martin Fuzzey (1):
ARM: i.MX53 Add the cko1, cko2 clock outputs.
Michal Simek (7):
arm: zynq: Load scu baseaddress at run time
arm: zynq: Move slcr initialization to separate file
arm: zynq: Add support for system reset
arm: zynq: Get rid of xilinx function prefix
arm: zynq: Add smp_twd timer
arm: zynq: Add smp support
arm: zynq: Add hotplug support
Neil Greatorex (1):
bus: mvebu-mbus: Restore checking for coherency fabric hardware
Olof Johansson (6):
Merge tag 'renesas-soc2-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-pinmux2-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-pinmux-fixes-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-soc-r8a7790-for-v3.10' of git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2
Merge tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux into next/soc2
Philipp Zabel (14):
ARM i.MX53: Add GPU clocks to clock tree
ARM i.MX6q: export imx6q_revision
ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
ARM i.MX53: fix ldb di divider and selector clocks
ARM i.MX6q: fix ldb di divider and selector clocks
ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
ARM i.MX6q: set the LDB serial clock parent to the video PLL
ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
staging: drm/imx: Use SRC to reset IPU
ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
ARM i.MX53: Remove unused tve_gate clkdev entry
ARM i.MX53: make tve_ext_sel propagate rate change to PLL
ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
Sascha Hauer (1):
ARM: i.MX5: Add PATA and SRTC clocks
Sergei Shtylyov (1):
ARM: shmobile: R8A7779: add Ether support
Shawn Guo (6):
Merge tag 'imx-fixes-3.9-5' into imx/soc
Merge tag 'imx-cleanup-3.10' into imx/soc
Merge remote-tracking branch 'pza/reset/for_v3.10' into imx/soc
ARM: imx: do not use regmap_read for ANADIG_DIGPROG
ARM: imx: add initial imx6dl support
ARM: imx: do not bring up unavailable cores
Simon Guinot (1):
ARM: Orion: add dbg_show function to gpio-orion driver
Thomas Petazzoni (8):
bus: introduce an Marvell EBU MBus driver
bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood
arm: mach-mvebu: convert to use mvebu-mbus driver
arm: mach-kirkwood: convert to use mvebu-mbus driver
arm: mach-dove: convert to use mvebu-mbus driver
arm: mach-orion5x: convert to use mvebu-mbus driver
arm: mach-mv78xx0: convert to use the mvebu-mbus driver
arm: plat-orion: remove addr-map code
.../devicetree/bindings/clock/imx5-clock.txt | 14 +-
.../devicetree/bindings/clock/imx6q-clock.txt | 3 +
.../devicetree/bindings/reset/fsl,imx-src.txt | 49 ++
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 3 +
arch/arm/Kconfig | 4 +
arch/arm/Kconfig.debug | 4 +-
arch/arm/boot/dts/armada-370-xp.dtsi | 5 -
arch/arm/boot/dts/zynq-7000.dtsi | 7 +
arch/arm/configs/imx_v4_v5_defconfig | 1 +
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/include/debug/mvebu.S | 2 +-
arch/arm/mach-dove/Makefile | 2 +-
arch/arm/mach-dove/addr-map.c | 125 ---
arch/arm/mach-dove/board-dt.c | 2 +-
arch/arm/mach-dove/common.c | 39 +-
arch/arm/mach-dove/common.h | 2 +-
arch/arm/mach-dove/include/mach/dove.h | 5 +
arch/arm/mach-imx/Kconfig | 10 +-
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/anatop.c | 103 +++
arch/arm/mach-imx/clk-imx51-imx53.c | 75 +-
arch/arm/mach-imx/clk-imx6q.c | 126 ++-
arch/arm/mach-imx/clk.h | 17 +
arch/arm/mach-imx/common.h | 10 +-
arch/arm/mach-imx/gpc.c | 23 +-
arch/arm/mach-imx/mach-imx6q.c | 74 +-
arch/arm/mach-imx/mm-imx1.c | 2 +
arch/arm/mach-imx/mxc.h | 11 +
arch/arm/mach-imx/platsmp.c | 4 +-
arch/arm/mach-imx/pm-imx6q.c | 4 +-
arch/arm/mach-imx/src.c | 66 ++
arch/arm/mach-kirkwood/Makefile | 2 +-
arch/arm/mach-kirkwood/addr-map.c | 91 ---
arch/arm/mach-kirkwood/board-dt.c | 2 +-
arch/arm/mach-kirkwood/common.c | 38 +-
arch/arm/mach-kirkwood/common.h | 2 +-
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 7 +-
arch/arm/mach-kirkwood/pcie.c | 1 -
arch/arm/mach-mv78xx0/Makefile | 2 +-
arch/arm/mach-mv78xx0/addr-map.c | 93 ---
arch/arm/mach-mv78xx0/common.c | 10 +-
arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 9 +-
arch/arm/mach-mv78xx0/pcie.c | 21 +-
arch/arm/mach-mvebu/Kconfig | 2 +
arch/arm/mach-mvebu/Makefile | 2 +-
arch/arm/mach-mvebu/addr-map.c | 137 ----
arch/arm/mach-mvebu/armada-370-xp.c | 18 +
arch/arm/mach-mvebu/armada-370-xp.h | 8 +-
arch/arm/mach-mvebu/platsmp.c | 2 +
arch/arm/mach-orion5x/Makefile | 2 +-
arch/arm/mach-orion5x/addr-map.c | 155 ----
arch/arm/mach-orion5x/board-dt.c | 2 +-
arch/arm/mach-orion5x/common.c | 49 +-
arch/arm/mach-orion5x/common.h | 13 +-
arch/arm/mach-orion5x/d2net-setup.c | 4 +-
arch/arm/mach-orion5x/db88f5281-setup.c | 13 +-
arch/arm/mach-orion5x/dns323-setup.c | 3 +-
arch/arm/mach-orion5x/edmini_v2-setup.c | 4 +-
arch/arm/mach-orion5x/include/mach/orion5x.h | 6 +-
arch/arm/mach-orion5x/kurobox_pro-setup.c | 8 +-
arch/arm/mach-orion5x/ls-chl-setup.c | 4 +-
arch/arm/mach-orion5x/ls_hgl-setup.c | 4 +-
arch/arm/mach-orion5x/lsmini-setup.c | 4 +-
arch/arm/mach-orion5x/mss2-setup.c | 3 +-
arch/arm/mach-orion5x/mv2120-setup.c | 3 +-
arch/arm/mach-orion5x/net2big-setup.c | 4 +-
arch/arm/mach-orion5x/pci.c | 7 +-
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 4 +-
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 4 +-
arch/arm/mach-orion5x/rd88f5182-setup.c | 7 +-
arch/arm/mach-orion5x/terastation_pro2-setup.c | 4 +-
arch/arm/mach-orion5x/ts209-setup.c | 4 +-
arch/arm/mach-orion5x/ts409-setup.c | 4 +-
arch/arm/mach-orion5x/wnr854t-setup.c | 4 +-
arch/arm/mach-orion5x/wrt350n-v2-setup.c | 4 +-
arch/arm/mach-shmobile/clock-r8a7779.c | 23 +-
arch/arm/mach-shmobile/include/mach/r8a7779.h | 2 +
arch/arm/mach-shmobile/setup-r8a7779.c | 23 +-
arch/arm/mach-zynq/Kconfig | 1 +
arch/arm/mach-zynq/Makefile | 6 +-
arch/arm/mach-zynq/common.c | 67 +-
arch/arm/mach-zynq/common.h | 20 +
arch/arm/mach-zynq/headsmp.S | 24 +
arch/arm/mach-zynq/hotplug.c | 104 +++
arch/arm/mach-zynq/platsmp.c | 136 ++++
arch/arm/mach-zynq/slcr.c | 125 +++
arch/arm/plat-orion/Makefile | 6 -
arch/arm/plat-orion/addr-map.c | 178 -----
arch/arm/plat-orion/gpio.c | 59 ++
drivers/bus/Kconfig | 7 +
drivers/bus/Makefile | 1 +
drivers/bus/mvebu-mbus.c | 870 +++++++++++++++++++++
drivers/gpio/gpio-pl061.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 2 +-
drivers/staging/imx-drm/ipu-v3/ipu-common.c | 12 +-
include/linux/mbus.h | 27 +-
96 files changed, 2257 insertions(+), 1002 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* [GIT PULL] ARM: arm-soc device tree changes, part 2
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2 Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3 Arnd Bergmann
@ 2013-05-07 16:02 ` Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc: late cleanups Arnd Bergmann
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 16:02 UTC (permalink / raw)
To: torvalds; +Cc: arm, linux-arm-kernel, linux-kernel, Arnd Bergmann
These are mostly new device tree bindings for existing drivers, as well
as changes to the device tree source files to add support for those
devices, and a couple of new boards, most notably Samsung's Exynos5
based Chromebook.
The changes depend on earlier platform specific updates and touch
the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci.
Conflicts:
Simple add/add conflicts in arch/arm/boot/dts/exynos5250.dtsi and
arch/arm/mach-omap2/omap_hwmod.c. In the former, be careful to
include the closing curly braces and semicolon.
-------------------------------------------------------------
The following changes since commit
9822346 Merge tag 'soc-for-linus-3' into for-next
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/dt-for-linus-2
you to fetch changes up to
4183bef Merge branch 'late/dt' into next/dt2
-------------------------------------------------------------
Alexander Graf (2):
ARM: dts: Declare the gic as a15 compatible for exynos5250
ARM: dts: Add architected timer nodes for exynos5250
Alexandre Belloni (3):
ARM: cfa10036: add one wire bitbanging to the cfa10049
pinctrl: pinctrl-mxs: document the missing pull-ups
ARM: dts: cfa10036: Add touchscreen support to the CFA-10049
Alexandre Pereira da Silva (1):
ARM: dts: imx23-olinuxino: mark sdcard cd as broken
Amit Daniel Kachhap (2):
ARM: dts: Add PMIC node entry for Arndale board
ARM: dts: Add cpufreq controller node for Exynos5440 SoC
Andrew Chew (2):
ARM: tegra: fix the status of PWM DT nodes
ARM: tegra: add PWM nodes to Tegra114 DT
Anil Kumar (3):
ARM: dts: Add minimal DT support for DevKit8000
ARM: dts: omap3-devkit8000: Enable audio support
ARM: dts: omap3-devkit8000: Add NAND DT node
AnilKumar Ch (3):
ARM: dts: AM33XX: Rename I2C and GPIO nodes
ARM: dts: AM33XX: Add d_can instances to aliases
ARM: dts: AM33XX: Add memory resource to d_can node
Arnd Bergmann (6):
Merge branch 'mxs/cleanup' into next/dt2
Merge tag 'mxs-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt2
Merge branch 'tegra/clk' into next/dt2
Merge tag 'tegra-for-3.10-dt' of git://git.kernel.org/.../swarren/linux-tegra into next/dt2
Merge branch 'late/dt' into next/dt2
Merge tag 'dt-for-linus-2' into for-next
Benoit Cousson (1):
Merge tag 'omap-devel-b-for-3.10' of git://git.kernel.org/.../pjw/omap-pending into for_3.10/dts_merged
Byungho An (1):
ARM: dts: Add node for GMAC for exynos5440
Christoph Fritz (1):
ARM/dts: OMAP3: fix pinctrl-single configuration
Doug Anderson (4):
ARM: dts: add usb 2.0 clock references to exynos5250 device tree
ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings
ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
ARM: dts: Add sbs-battery for exynos5250-snow
Fabio Estevam (1):
video: mxsfb: Introduce regulator support
Felipe Balbi (1):
ARM: dts: OMAP5: Add SPI nodes
Florian Vaussard (3):
ARM: dts: omap3-overo: Add support for pwm-leds
ARM: dts: omap3-overo: Add audio support
ARM: dts: OMAP3: Add GPMC controller
Giridhar Maruthy (1):
ARM: dts: Add virtual GIC DT bindings for exynos5440
Gregory CLEMENT (3):
ARM: dts: mvebu: Convert all the mvebu files to use the range property
ARM: dts: mvebu: introduce internal-regs node
ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
Jason Cooper (2):
Merge tag 'tags/mvebu_fixes_for_v3.9_round3' into mvebu/dt
Merge tag 'tags/soc_for_v3.10' into mvebu/dt
Javier Martinez Canillas (5):
ARM: dts: omap3: Add generic DT support for IGEP devices
ARM: dts: omap3: Add support for IGEPv2 board
ARM: dts: omap3: Add support for IGEP COM Module
ARM: dts: OMAP3: reduce GPMC mapped registers address space
Documentation: dt: gpio-omap: Move interrupt-controller from #interrupt-cells description
Jon Hunter (16):
ARM: OMAP2+: Prepare for device-tree PMU support
ARM: dts: OMAP2+: Add PMU nodes
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
ARM: dts: Add OMAP2 gpio bindings
ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
ARM: dts: OMAP3: Add reg and interrupt properties for gpio
ARM: dts: OMAP3: Add support for OMAP3430 SDP board
ARM: OMAP: Force dmtimer restore if context loss is not detectable
ARM: OMAP: Add function to request timer by node
ARM: dts: OMAP2+: Update DMTIMER compatibility property
ARM: OMAP2+: Populate DMTIMER errata when using device-tree
ARM: dts: OMAP2+: Identify GPIO banks that are always powered
ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties
ARM: dts: Add NOR flash bindings for OMAP2420 H4
ARM: dts: Add OMAP3430 SDP NOR flash memory binding
Joseph Lo (4):
ARM: tegra: add power gpio keys to DT
ARM: tegra: whistler: add wakeup source for KBC
ARM: tegra: add non-removable and keep-power-in-suspend property for MMC
ARM: dts: tegra: add the PM configurations of PMC
Kishon Vijay Abraham I (7):
ARM: dts: OMAP4: Add omap control usb data
ARM: dts: OMAP4: Add omap-usb2 data
ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
ARM: dts: OMAP5: Add OMAP control usb data
ARM: dts: OMAP5: Add ocp2scp data
ARM: dts: OMAP5: Add omap-usb3 and omap-usb2 data
ARM: dts: OMAP5: add dwc3 omap and dwc3 core data
Kukjin Kim (1):
ARM: dts: add device tree file for SD5v1 board
Laxman Dewangan (9):
ARM: tegra: add APB DMA nodes to Tegra114 DT
ARM: tegra: add I2C nodes to Tegra114 DT
ARM: tegra: add aliases and DMA requestor for serial nodes of Tegra114
ARM: tegra: add KBC nodes to Tegra114 DT
ARM: tegra: add SPI nodes to Tegra114 DT
ARM: tegra: add DT binding for i2c-tegra
ARM: tegra: dalmore: add cpu regulator node
ARM: tegra: dalmore: add TPS65090 node
ARM: tegra: dalmore: add fixed regulator node
Leela Krishna Amudala (2):
ARM: dts: Add FIMD node to exynos5
ARM: dts: Add display timing node to exynos5250-smdk5250.dts
Lokesh Vutla (1):
ARM: dts: OMAP5: Add watchdog timer node
Manjunathappa, Prakash (4):
spi/davinci: no wildcards in DT compatible property
ARM: davinci: da850: add SPI1 DT node
ARM: davinci: da850: override SPI DT node device name
ARM: davinci: da850-evm: add SPI flash support
Matthias Brugger (1):
ARM: dts: omap3-igep: Add uart1 and uart2 to igep boards
Murali Karicheri (1):
spi/davinci: add DT binding documentation
NeilBrown (1):
ARM: OMAP: Simplify dmtimer context-loss handling
Nishanth Menon (6):
ARM: dts: OMAP34xx/35xx: Add CPU OPP table
ARM: dts: OMAP36xx: Add CPU OPP table
ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU
ARM: dts: OMAP443x: Add CPU OPP table
ARM: dts: omap4-panda: move generic sections to panda-common
ARM: dts: OMAP4460: Add CPU OPP table
Olof Johansson (10):
Merge branch 'omap/fixes-non-critical' into next/dt2
Merge branch 'omap/usb' into next/dt2
Merge tag 'omap-for-v3.10/dt-signed-v2' of git://git.kernel.org/.../tmlind/linux-omap into next/dt2
Merge tag 'dt-exynos-for-v3.10' of git://git.kernel.org/.../kgene/linux-samsung into next/dt2
Merge tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux into next/dt2
Merge tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/.../nsekhar/linux-davinci into next/dt2
Merge branch 'samsung/pinctrl-exynos' into late/dt
Merge branch 'exynos/dt' into late/dt
ARM: exynos: dts: cros5250: add EC device
Merge tag 'late-exynos-v3-for-v3.10' of git://git.kernel.org/.../kgene/linux-samsung into late/dt
Peter Ujfalusi (5):
ARM: dts: twl4030: Add PWM support
ARM: dts: twl6030: Add PWM support
ARM: dts: omap3-beagle-xm: Use pwm-leds for pmu_stat LED
ARM: dts: omap4-sdp: Add support for pwm-leds (keypad and charging LED)
ARM: dts: omap4-sdp: Add support for pwm-backlight
Philip Avinash (2):
ARM: dts: AM33XX: Corrects typo in interrupt field in SPI node
ARM: davinci: da850: add EHRPWM & ECAP DT node
Prashant Gaikwad (1):
clk: tegra: Fix cdev1 and cdev2 IDs
Pritesh Raithatha (2):
ARM: tegra: add default pinctrl nodes for Dalmore
ARM: tegra: add SDHCI nodes with common properties
Rajendra Nayak (1):
ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
Rhyland Klein (2):
ARM: tegra: add SDHCI support for Dalmore
ARM: tegra: Add sbs-battery node to Dalmore
Sachin Kamat (11):
ARM: dts: Add G2D node to exynos4210.dtsi
ARM: dts: Add G2D node to SMDKV310
ARM: dts: Add G2D node to exynos4210-origen
ARM: dts: Add G2D node to exynos4x12.dtsi
ARM: dts: Add G2D node to SMDK4412
ARM: dts: Add G2D node to exynos4412-origen
ARM: dts: Add Samsung G2D DT bindings documentation
ARM: dts: Add disable-wp for card slot on exynos5250-arndale
ARM: dts: Add vmmc regulator support for Arndale board
ARM: dts: Add MFC codec support for Arndale board
ARM: dts: Add HDMI HPD and regulator node for Arndale board
Santosh Shilimkar (9):
ARM: dts: omap5-evm: Update available memory to 2032 MB
ARM: dts: OMAP5: Align the local timer dt node as per the current binding code
ARM: dts: OMAP5: Move the gic node out of ocp space
ARM: dts: OMAP5: Update the timer and GIC nodes for HYP kernel support
ARM: dts: OMAP5: Update keypad reg property
Documentation: dt: OMAP: l3-noc: Add *reg* in required properties
ARM: dts: OMAP4/5: Update l3-noc DT nodes
ARM: OMAP2+: hwmod: extract module address space from DT blob
ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc
Sebastien Guiriec (1):
ARM: dts: OMAP2+: Add SDMA Audio IPs bindings
Shawn Guo (16):
net: fec: handle optional clk_ptp more gracefully
ARM: mxs: remove unneeded enet_out clk initialization
video: mxsfb: use devm_* managed functions
video: mxsfb: remove fb_phys/fb_size from platform_data
video: mxsfb: remove dotclk_delay from platform_data
video: mxsfb: get display timings from device tree
ARM: mxs: move display timing configurations into device tree
video: mxsfb: remove mxsfb_platform_data
ARM: dts: add generic DMA device tree binding for mxs-dma
dma: mxs-dma: use devm_* managed functions
dma: mxs-dma: move to generic device tree binding
mmc: mxs-mmc: move to use generic DMA helper
spi: mxs-spi: move to use generic DMA helper
i2c: i2c-mxs: move to use generic DMA helper
mtd: gpmi: move to use generic DMA helper
serial: mxs-auart: move to use generic DMA helper
Sourav Poddar (4):
ARM: dts: omap4-sdp: Add I2c pinctrl data
ARM: dts: omap5-evm: Add I2c pinctrl data
ARM: dts: omap4-panda: Add I2c pinctrl data
ARM: dts: omap5-evm: Add mcspi data
Stephen Warren (5):
ARM: tegra: device tree whitespace cleanup
ARM: tegra: fix sort order of USB PHY nodes
ARM: tegra: add clocks property to sound nodes
ARM: tegra: add clocks property to AC'97 sound nodes
ARM: tegra: keep power on to SD slot on Dalmore
Subash Patel (3):
ARM: dts: add PMU support in exynos5440
ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440
ARM: dts: add PDMA0 changes for exynos5440
Sylwester Nawrocki (1):
ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series
Thomas Abraham (7):
ARM: dts: add pin state information in client nodes for Exynos4 platforms
ARM: dts: add pin state information in client nodes for Exynos5 platforms
ARM: dts: list the interrupts generated by pin-controller on Exynos5440
ARM: dts: Fix gmac clock ids due to changes in Exynos5440
ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
ARM: dts: Add chip-id controller node on Exynos4/5 SoC
ARM: dts: add mshc controller node for Exynos4x12 SoCs
Thomas Petazzoni (2):
ARM: dts: mvebu: fix cpus section indentation
ARM: dts: mvebu: move all peripherals inside soc
Tony Lindgren (1):
Merge branch 'for_3.10/dts' of git://git.kernel.org/.../bcousson/linux-omap-dt into omap-for-v3.10/dt
Tushar Behera (2):
ARM: dts: Add pin-control related changes for Arndale board
ARM: dts: Add gpio-button entries for Arndale board
Vikas Sajjan (3):
ARM: dts: Add FIMD node to exynos4
ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts
ARM: dts: Add FIMD DT binding Documentation
Wolfram Sang (2):
net: freescale: fec: add support for optional enet_out clk
ARM: dts: mxs: add enet_out clock to devicetree
.../devicetree/bindings/arm/omap/l3-noc.txt | 1 +
.../devicetree/bindings/arm/omap/timer.txt | 17 +-
.../devicetree/bindings/arm/samsung/sysreg.txt | 7 +
.../devicetree/bindings/dma/fsl-mxs-dma.txt | 49 +-
Documentation/devicetree/bindings/fb/mxsfb.txt | 36 +-
.../devicetree/bindings/gpio/gpio-omap.txt | 8 +-
.../devicetree/bindings/gpu/samsung-g2d.txt | 20 +
Documentation/devicetree/bindings/i2c/i2c-mxs.txt | 12 +-
.../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 60 ++
Documentation/devicetree/bindings/mmc/mxs-mmc.txt | 12 +-
.../devicetree/bindings/mtd/gpmi-nand.txt | 17 +-
.../bindings/pinctrl/fsl,mxs-pinctrl.txt | 4 +
.../bindings/sound/nvidia,tegra-audio-alc5632.txt | 8 +
.../sound/nvidia,tegra-audio-trimslice.txt | 7 +
.../bindings/sound/nvidia,tegra-audio-wm8753.txt | 8 +
.../bindings/sound/nvidia,tegra-audio-wm8903.txt | 8 +
.../bindings/sound/nvidia,tegra-audio-wm9712.txt | 8 +
Documentation/devicetree/bindings/spi/mxs-spi.txt | 12 +-
.../devicetree/bindings/spi/spi-davinci.txt | 51 ++
.../bindings/tty/serial/fsl-mxs-auart.txt | 16 +-
.../devicetree/bindings/usb/exynos-usb.txt | 10 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
.../devicetree/bindings/video/samsung-fimd.txt | 65 ++
arch/arm/boot/dts/Makefile | 5 +
arch/arm/boot/dts/am335x-bone.dts | 10 +-
arch/arm/boot/dts/am335x-evm.dts | 18 +-
arch/arm/boot/dts/am335x-evmsk.dts | 18 +-
arch/arm/boot/dts/am33xx.dtsi | 40 +-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/armada-370-db.dts | 134 ++--
arch/arm/boot/dts/armada-370-mirabox.dts | 176 ++--
arch/arm/boot/dts/armada-370-rd.dts | 96 +--
arch/arm/boot/dts/armada-370-xp.dtsi | 336 ++++----
arch/arm/boot/dts/armada-370.dtsi | 330 ++++----
arch/arm/boot/dts/armada-xp-db.dts | 202 ++---
arch/arm/boot/dts/armada-xp-gp.dts | 222 ++---
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 284 +++----
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 342 ++++----
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 484 +++++------
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 262 +++---
arch/arm/boot/dts/armada-xp.dtsi | 202 ++---
arch/arm/boot/dts/cros5250-common.dtsi | 54 +-
arch/arm/boot/dts/da850-evm.dts | 40 +
arch/arm/boot/dts/da850.dtsi | 94 +++
arch/arm/boot/dts/exynos4.dtsi | 32 +
arch/arm/boot/dts/exynos4210-origen.dts | 4 +
arch/arm/boot/dts/exynos4210-smdkv310.dts | 57 +-
arch/arm/boot/dts/exynos4210.dtsi | 7 +
arch/arm/boot/dts/exynos4412-origen.dts | 21 +
arch/arm/boot/dts/exynos4412-smdk4412.dts | 8 +
arch/arm/boot/dts/exynos4412.dtsi | 8 +
arch/arm/boot/dts/exynos4x12.dtsi | 7 +
arch/arm/boot/dts/exynos5250-arndale.dts | 343 +++++++-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 783 ++++++++++++++++++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 49 +-
arch/arm/boot/dts/exynos5250-snow.dts | 149 +++-
arch/arm/boot/dts/exynos5250.dtsi | 348 +++-----
arch/arm/boot/dts/exynos5440-sd5v1.dts | 39 +
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 6 +-
arch/arm/boot/dts/exynos5440.dtsi | 55 +-
arch/arm/boot/dts/imx23-evk.dts | 36 +-
arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
arch/arm/boot/dts/imx23.dtsi | 42 +-
arch/arm/boot/dts/imx28-apf28dev.dts | 25 +
arch/arm/boot/dts/imx28-apx4devkit.dts | 25 +
arch/arm/boot/dts/imx28-cfa10049.dts | 50 +-
arch/arm/boot/dts/imx28-evk.dts | 36 +-
arch/arm/boot/dts/imx28-m28evk.dts | 27 +
arch/arm/boot/dts/imx28.dtsi | 62 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 +-
arch/arm/boot/dts/omap2.dtsi | 39 +-
arch/arm/boot/dts/omap2420-h4.dts | 46 ++
arch/arm/boot/dts/omap2420.dtsi | 67 +-
arch/arm/boot/dts/omap2430.dtsi | 87 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 26 +-
arch/arm/boot/dts/omap3-beagle.dts | 8 +-
arch/arm/boot/dts/omap3-devkit8000.dts | 169 ++++
arch/arm/boot/dts/omap3-evm.dts | 14 +-
arch/arm/boot/dts/omap3-igep.dtsi | 122 +++
arch/arm/boot/dts/omap3-igep0020.dts | 56 ++
arch/arm/boot/dts/omap3-igep0030.dts | 44 +
arch/arm/boot/dts/omap3-overo.dtsi | 31 +-
arch/arm/boot/dts/omap3.dtsi | 142 +++-
arch/arm/boot/dts/omap3430-sdp.dts | 190 +++++
arch/arm/boot/dts/omap34xx.dtsi | 28 +
arch/arm/boot/dts/omap36xx.dtsi | 13 +
arch/arm/boot/dts/omap4-panda-a4.dts | 5 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 251 ++++++
arch/arm/boot/dts/omap4-panda-es.dts | 5 +-
arch/arm/boot/dts/omap4-panda.dts | 201 +----
arch/arm/boot/dts/omap4-sdp.dts | 74 +-
arch/arm/boot/dts/omap4-var-som.dts | 2 +-
arch/arm/boot/dts/omap4.dtsi | 135 +++-
arch/arm/boot/dts/omap443x.dtsi | 27 +
arch/arm/boot/dts/omap4460.dtsi | 32 +
arch/arm/boot/dts/omap5-evm.dts | 110 ++-
arch/arm/boot/dts/omap5.dtsi | 245 +++++-
arch/arm/boot/dts/tegra114-dalmore.dts | 891 +++++++++++++++++++++
arch/arm/boot/dts/tegra114.dtsi | 240 +++++-
arch/arm/boot/dts/tegra20-colibri-512.dtsi | 12 +
arch/arm/boot/dts/tegra20-harmony.dts | 20 +
arch/arm/boot/dts/tegra20-medcom-wide.dts | 7 +
arch/arm/boot/dts/tegra20-paz00.dts | 10 +
arch/arm/boot/dts/tegra20-plutux.dts | 3 +
arch/arm/boot/dts/tegra20-seaboard.dts | 11 +
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +
arch/arm/boot/dts/tegra20-tec.dts | 3 +
arch/arm/boot/dts/tegra20-trimslice.dts | 23 +
arch/arm/boot/dts/tegra20-ventana.dts | 22 +
arch/arm/boot/dts/tegra20-whistler.dts | 13 +
arch/arm/boot/dts/tegra20.dtsi | 53 +-
arch/arm/boot/dts/tegra30-beaver.dts | 8 +
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 11 +
arch/arm/boot/dts/tegra30.dtsi | 1 +
arch/arm/boot/dts/twl4030.dtsi | 18 +-
arch/arm/boot/dts/twl6030.dtsi | 12 +
arch/arm/mach-davinci/da8xx-dt.c | 6 +
arch/arm/mach-exynos/common.c | 53 +-
arch/arm/mach-exynos/include/mach/map.h | 1 -
arch/arm/mach-mxs/mach-mxs.c | 170 ----
arch/arm/mach-omap2/board-generic.c | 1 +
arch/arm/mach-omap2/omap_hwmod.c | 48 +-
arch/arm/mach-omap2/pmu.c | 14 +-
arch/arm/mach-omap2/timer.c | 7 +-
arch/arm/plat-omap/dmtimer.c | 241 +++---
arch/arm/plat-omap/include/plat/dmtimer.h | 1 +
drivers/dma/mxs-dma.c | 109 ++-
drivers/i2c/busses/i2c-mxs.c | 40 +-
drivers/mmc/host/mxs-mmc.c | 48 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 51 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 3 +-
drivers/net/ethernet/freescale/fec.h | 1 +
drivers/net/ethernet/freescale/fec_main.c | 18 +-
drivers/spi/spi-davinci.c | 4 +-
drivers/spi/spi-mxs.c | 60 +-
drivers/tty/serial/mxs-auart.c | 52 +-
drivers/video/Kconfig | 2 +
drivers/video/mxsfb.c | 260 +++---
include/linux/mxsfb.h | 52 --
include/linux/spi/mxs-spi.h | 4 +-
143 files changed, 7751 insertions(+), 3048 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* [GIT PULL] ARM: arm-soc: late cleanups
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
` (2 preceding siblings ...)
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc device tree changes, part 2 Arnd Bergmann
@ 2013-05-07 16:02 ` Arnd Bergmann
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes Arnd Bergmann
2013-05-07 17:02 ` [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Linus Torvalds
5 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 16:02 UTC (permalink / raw)
To: torvalds; +Cc: arm, linux-arm-kernel, linux-kernel, Arnd Bergmann
These are cleanups and smaller changes that either depend on earlier
feature branches or came in late during the development cycle.
We normally try to get all cleanups early, so these are the exceptions:
- A follow-up on the clocksource reworks, hopefully the last time
we need to merge clocksource subsystem changes through arm-soc.
A first set of patches was part of the original 3.10 arm-soc cleanup
series because of interdependencies with timer drivers now moved out
of arch/arm.
- Migrating the SPEAr13xx platform away from using auxdata for DMA
channel descriptions towards using information in device tree,
based on the earlier SPEAr multiplatform series
- A few follow-ups on the Atmel SAMA5 support and other changes
for Atmel at91 based on the larger at91 reworks.
- Moving the armada irqchip implementation to drivers/irqchip
- Several OMAP cleanups following up on the larger series already
merged in 3.10.
There are a few more conflicts that we would like now:
Simple conflicts between unrelated add or del hunks:
- arch/arm/Kconfig
- arch/arm/mach-mvebu/Makefile
- arch/arm/mach-mvebu/armada-370-xp.c
- arch/arm/mach-spear/spear13xx.c
- drivers/irqchip/Makefile
And non-obvious ones:
- remove/modify conflict in arch/arm/mach-exynos/mach-exynos5-dt.c:
keep the modified line
- multiple changes to arch/arm/mach-vexpress/v2m.c:
keep of_clk_init(NULL), clocksource_of_init() and
versatile_sched_clock_init() calls
-------------------------------------------------------------
The following changes since commit
763e6b9 Merge tag 'dt-for-linus-2' into for-next
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/cleanup-for-linus-2
you to fetch changes up to
0592c21 Merge tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup
-------------------------------------------------------------
Archit Taneja (13):
arm: omap: board-2430: use generic dpi panel's gpio handling
arm: omap: board-devkit8000: use generic dpi panel's gpio handling
arm: omap: board-am3517: use generic dpi panel's gpio handling
arm: omap: board-ldp: use generic dpi panel's gpio handling
arm: omap: board-overo: use lb035q02 dpi panel's gpio handling
arm: omap: board-omap3evm: use sharp panel's gpio handling
arm: omap: board-sdp3430: use sharp panel's gpio handling
arm: omap: board-rx-51: use acx565akm panel's gpio handling
arm: omap: board-zoom: use NEC panel's gpio handling
arm: omap: board-omap3pandora: use tpo panel's gpio handling
arm: omap: dss-common: use picodlp panel's gpio handling
arm: omap boards: Remove unnecessary platform_enable/disable callbacks for VENC devices
arm: dss-common: don't use reset_gpio from omap4_panda_dvi_device
Arnd Bergmann (16):
spi: pl022: use generic DMA slave configuration if possible
serial: pl011: use generic DMA slave configuration if possible
Merge branch 'spear/multiplatform' into spear/dma
ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
ARM: make machine_desc->init_time default to clocksource_of_init
ARM: at91: suspend both memory controllers on at91sam9263
ata: arasan: remove the need for platform_data
Merge branch 'spear/multiplatform' into late/cleanup
Merge branch 'spear/dwdma' into late/cleanup
serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
ARM: OMAP: remove unused variable
Merge tag 'at91-soc' of git://github.com/at91linux/linux-at91 into late/cleanup
ARM: SPEAr: conditionalize SMP code
Merge branch 'late/clksrc' into late/cleanup
Merge tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/.../tmlind/linux-omap into late/cleanup
Merge tag 'cleanup-for-linus-2' into for-next
Haojian Zhuang (1):
devtree: add binding documentation for sp804
Kishon Vijay Abraham I (1):
ARM: OMAP4: change the device names in usb_bind_phy
Ludovic Desroches (3):
ARM: at91: dts: set #dma-cells to the correct value
ARM: at91: dts: add i2c dma support
ARM: at91: dts: add MCI DMA support
Nicolas Ferre (2):
ARM: at91: change "Unknown" qualifier SoC subtype handling
ARM: at91/sama5d34ek.dts: remove not needed compatibility string
Olof Johansson (7):
Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc
Merge tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux into late/cleanup
Merge branch 'omap/fixes-non-critical' into late/cleanup
Merge branch 'omap/boards' into late/cleanup
Merge tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/.../tmlind/linux-omap into late/cleanup
Merge branch 'at91/soc' into late/cleanup
Merge tag 'at91-soc' of git://github.com/at91linux/linux-at91 into late/cleanup
Peter Ujfalusi (1):
ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
Rob Herring (13):
ARM: sched_clock: allow changing to higher frequency counter
ARM: make sched_clock just call a function pointer
ARM: arch_timer: use full 64-bit counter for sched_clock
ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
OF: add empty of_device_is_available for !OF
ARM: timer-sp: convert to use CLKSRC_OF init
ARM: highbank: use OF init for sp804 timer
ARM: vexpress: remove sp804 OF init
ARM: dts: vexpress: disable CA9 core tile sp804 timer
ARM: vexpress: remove extra timer-sp control register clearing
ARM: versatile: add versatile dtbs to dtbs target
ARM: versatile: use OF init for sp804 timer
ARM: integrator-cp: convert use CLKSRC_OF for timer init
Stephen Boyd (1):
ARM: arch_timer: Silence debug preempt warnings
Thomas Petazzoni (4):
ARM: mvebu: move L2 cache initialization in init_early()
irqchip: move IRQ driver for Armada 370/XP
irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
irqchip: armada-370-xp: slightly cleanup irq controller driver
Tomi Valkeinen (1):
arm: omap: board-cm-t35: use generic dpi panel's gpio handling
Tony Lindgren (1):
Merge branch '3.10-lo/board-cleanup' of git://gitorious.org/linux-omap-dss2/linux into omap-for-v3.10/dss
Vaibhav Hiremath (1):
ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
.../devicetree/bindings/arm/primecell.txt | 19 ++-
.../devicetree/bindings/ata/pata-arasan.txt | 22 ++++
Documentation/devicetree/bindings/serial/pl011.txt | 17 +++
.../devicetree/bindings/spi/spi_pl022.txt | 36 ++++++
.../devicetree/bindings/timer/arm,sp804.txt | 29 +++++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/at91sam9g45.dtsi | 5 +
arch/arm/boot/dts/at91sam9n12.dtsi | 9 ++
arch/arm/boot/dts/at91sam9x5.dtsi | 15 +++
arch/arm/boot/dts/integratorcp.dts | 6 +-
arch/arm/boot/dts/sama5d3.dtsi | 19 ++-
arch/arm/boot/dts/sama5d34ek.dts | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 3 +
arch/arm/boot/dts/spear13xx.dtsi | 25 +++-
arch/arm/boot/dts/versatile-ab.dts | 12 ++
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 1 +
arch/arm/common/timer-sp.c | 140 ++++++++++++++++++---
arch/arm/include/asm/arch_timer.h | 13 +-
arch/arm/include/asm/hardware/timer-sp.h | 16 ++-
arch/arm/include/asm/sched_clock.h | 2 +
arch/arm/kernel/arch_timer.c | 29 ++---
arch/arm/kernel/sched_clock.c | 15 ++-
arch/arm/kernel/time.c | 7 +-
arch/arm/mach-at91/cpuidle.c | 2 +
arch/arm/mach-at91/include/mach/cpu.h | 9 +-
arch/arm/mach-at91/pm.c | 2 +
arch/arm/mach-at91/pm.h | 30 ++++-
arch/arm/mach-at91/setup.c | 22 ++--
arch/arm/mach-highbank/highbank.c | 24 +---
arch/arm/mach-integrator/integrator_cp.c | 34 -----
arch/arm/mach-mvebu/Makefile | 2 +-
arch/arm/mach-mvebu/armada-370-xp.c | 9 +-
arch/arm/mach-omap2/board-2430sdp.c | 43 +------
arch/arm/mach-omap2/board-3430sdp.c | 53 +++-----
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-am3517evm.c | 74 +----------
arch/arm/mach-omap2/board-cm-t35.c | 60 ++-------
arch/arm/mach-omap2/board-devkit8000.c | 27 +---
arch/arm/mach-omap2/board-ldp.c | 61 ++-------
arch/arm/mach-omap2/board-omap3evm.c | 70 +++--------
arch/arm/mach-omap2/board-omap3pandora.c | 7 +-
arch/arm/mach-omap2/board-omap3stalker.c | 11 --
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 58 +++------
arch/arm/mach-omap2/board-rx51-video.c | 26 ++--
arch/arm/mach-omap2/board-zoom-display.c | 38 ++----
arch/arm/mach-omap2/dss-common.c | 54 +++-----
arch/arm/mach-omap2/timer.c | 7 +-
arch/arm/mach-shmobile/board-kzm9d.c | 1 -
arch/arm/mach-shmobile/setup-emev2.c | 1 -
arch/arm/mach-shmobile/setup-r8a7740.c | 1 -
arch/arm/mach-shmobile/setup-sh7372.c | 1 -
arch/arm/mach-shmobile/setup-sh73a0.c | 1 -
arch/arm/mach-shmobile/timer.c | 7 +-
arch/arm/mach-spear/Makefile | 6 +-
arch/arm/mach-spear/generic.h | 5 -
arch/arm/mach-spear/include/mach/spear.h | 2 -
arch/arm/mach-spear/spear1310.c | 30 +----
arch/arm/mach-spear/spear1340.c | 32 +----
arch/arm/mach-spear/spear13xx-dma.h | 128 -------------------
arch/arm/mach-spear/spear13xx.c | 60 +--------
arch/arm/mach-versatile/core.c | 26 ++--
arch/arm/mach-versatile/versatile_dt.c | 1 -
arch/arm/mach-vexpress/v2m.c | 25 +---
arch/arm/mach-virt/virt.c | 9 --
arch/arm64/include/asm/arch_timer.h | 5 +
arch/arm64/kernel/time.c | 6 +-
drivers/ata/pata_arasan_cf.c | 37 +++---
drivers/clocksource/Kconfig | 1 +
drivers/clocksource/arm_arch_timer.c | 33 +++--
drivers/clocksource/exynos_mct.c | 1 -
drivers/irqchip/Makefile | 1 +
.../irqchip}/irq-armada-370-xp.c | 106 ++++++++--------
drivers/spi/spi-pl022.c | 43 ++++++-
drivers/tty/serial/amba-pl011.c | 64 ++++++----
include/clocksource/arm_arch_timer.h | 6 -
include/linux/of.h | 5 +
include/linux/pata_arasan_cf_data.h | 2 -
79 files changed, 777 insertions(+), 1041 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
` (3 preceding siblings ...)
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc: late cleanups Arnd Bergmann
@ 2013-05-07 16:02 ` Arnd Bergmann
2013-05-07 17:02 ` [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Linus Torvalds
5 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 16:02 UTC (permalink / raw)
To: torvalds; +Cc: arm, linux-arm-kernel, linux-kernel, Arnd Bergmann
These continue the multiplatform support for exynos, adding support
for building most of the essential drivers (clocksource, clk, irqchip)
when combined with other platforms. As a result, it should become
really easy to add full multiplatform exynos support in 3.11, although
we don't yet enable it for 3.10.
The changes were not included in the earlier multiplatform series
in order to avoid clashes with the other Exynos updates.
This also includes work from Tomasz Figa to fix the pwm clocksource
code on Exynos, which is not strictly required for multiplatform,
but related to the other patches in this set and needed as a bug
fix for at least one board.
Conflicts:
- in arch/arm/mach-exynos/common.c, the irq_set_wake callback
gets added, while a call to s5p_init_irq() gets removed and
the prototype for combiner_init changes.
-------------------------------------------------------------
The following changes since commit
e8b1270 Merge tag 'cleanup-for-linus-2' into for-next
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/multiplatform-for-linus-2
you to fetch changes up to
241a987 Merge branch 'exynos/pwm-clocksource' into late/multiplatform
-------------------------------------------------------------
Arnd Bergmann (12):
clk: exynos: prepare for multiplatform
clocksource: exynos_mct: remove platform header dependency
ARM: exynos: add missing properties for combiner IRQs
irqchip: exynos: pass max combiner number to combiner_init
irqchip: exynos: allocate combiner_data dynamically
irqchip: exynos: localize irq lookup for ATAGS
irqchip: exynos: pass irq_base from platform
irqchip: exynos: look up irq using irq_find_mapping
Merge branch 'next/drivers' into late/multiplatform
Merge branch 'samsung/exynos-multiplatform-drivers' into late/multiplatform
Merge branch 'exynos/pwm-clocksource' into late/multiplatform
Merge tag 'multiplatform-for-linus-2' into for-next
Olof Johansson (1):
ARM: dts: exynops4210: really add universal_c210 dts
Tomasz Figa (13):
clocksource: add samsung pwm timer driver
Documentation: Add device tree bindings for Samsung PWM timers
clocksource: samsung_pwm_timer: Let platforms select the driver
clocksource: samsung_pwm_timer: Make PWM spinlock global
clocksource: samsung_pwm_timer: Keep all driver data in a structure
clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
clocksource: samsung_pwm_timer: Add support for non-DT platforms
clocksource: samsung_pwm_timer: Use proper clockevents max_delta
clocksource: samsung_pwm_timer: Correct programming of clock events
clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
ARM: dts: exynos4: Add node for PWM device
ARM: dts: exynos4210: Add basic dts file for universal_c210 board
.../devicetree/bindings/pwm/pwm-samsung.txt | 43 ++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos4.dtsi | 8 +
arch/arm/boot/dts/exynos4210-universal_c210.dts | 352 +++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 1 +
arch/arm/boot/dts/exynos4212.dtsi | 9 +
arch/arm/boot/dts/exynos4412.dtsi | 9 +
arch/arm/mach-exynos/common.c | 35 +-
arch/arm/mach-exynos/common.h | 7 +-
arch/arm/plat-samsung/Kconfig | 4 +-
drivers/clk/samsung/clk-exynos4.c | 93 ++--
drivers/clk/samsung/clk-exynos5250.c | 1 -
drivers/clk/samsung/clk-exynos5440.c | 1 -
drivers/clk/samsung/clk.h | 2 -
drivers/clocksource/Kconfig | 9 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/exynos_mct.c | 21 +-
drivers/clocksource/samsung_pwm_timer.c | 494 +++++++++++++++++++++
drivers/irqchip/exynos-combiner.c | 125 +++---
include/clocksource/samsung_pwm.h | 36 ++
20 files changed, 1098 insertions(+), 154 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
2013-05-07 16:02 [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Arnd Bergmann
` (4 preceding siblings ...)
2013-05-07 16:02 ` [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes Arnd Bergmann
@ 2013-05-07 17:02 ` Linus Torvalds
2013-05-07 17:19 ` Arnd Bergmann
2013-05-07 17:32 ` Russell King - ARM Linux
5 siblings, 2 replies; 11+ messages in thread
From: Linus Torvalds @ 2013-05-07 17:02 UTC (permalink / raw)
To: Arnd Bergmann
Cc: ARM SoC, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List
On Tue, May 7, 2013 at 9:02 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>
> I used a new script to create the pull requests this time, hope
> I got it right now.
So you seem to have blasted this series out with that automated
script, so they all got sent basically at the same timestamp, and they
are in the wrong order in my mailbox because email isn't that ordered.
Which is very annoying when there is no obvious way to tell what the
ordering between the pulls are *and* they are clearly not independent.
It turns out that I tried to merge "part 3" before "part 2", because I
hadn't noticed that small detail, and "part 3" was first in my inbox.
If you have pull requests that depend on each other, please number
them CLEARLY ("part 3" may sound clear, but it's not at all so when
I've done 123 merges in the last 10 days, and I can't remember if
perhaps two of those are earlier merges from you. Or at least delay
sending them out by a few seconds in between, so that email systems
don't tend to re-order them.
Or, in fact, preferably both.
Of course, when there aren't any dependencies between pull requests,
and the ordering doesn't matter, this isn't an issue. And *most* of
the time you either have sent out emails by hand (and there's been
that human delay and they arrived in the right order) or I've just
been lucky.
So if ordering matters, I really prefer to see [git pull 1/3] or
something like that at the beginning of the subject line. That is
visually clear, and unambiguous. And/or a few seconds or more between
sends - sure, email may still get re-ordered, but in the modern world
that tends to be unlikely to happen for stuff that is more than a
second or two apart.
Please do NOT do what you did here. Everything got batched up and sent
in the same second, and the numbering was unclear AS HELL. There's a
"device tree changes, part 2", which isn't unreadable on its own (just
not very obvious), but THERE IS NO PART ONE! Similarly, there are
"arm-soc platform updates" parts 2 and 3, but again, there is no "part
1".
WTF? Seriously, I have no clue. Is the "late Exynos multiplatform
changes" the "part 1" of the device tree changes or the platform
changes? It could be either. And the "late cleanups"? Are they the
"part 1" of the other series (that didn't have the Exynos changes), or
are they "late" and come after everything?
Quite frankly, I'm not going to bother guessing after the first one I
took was clearly not the right one and gave the wrong diffstat etc, so
they are all thrown down the toilet.
Nothing pulled.
Linus
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
2013-05-07 17:02 ` [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Linus Torvalds
@ 2013-05-07 17:19 ` Arnd Bergmann
2013-05-07 17:32 ` Russell King - ARM Linux
1 sibling, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 17:19 UTC (permalink / raw)
To: Linus Torvalds
Cc: ARM SoC, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List
On Tuesday 07 May 2013, Linus Torvalds wrote:
> On Tue, May 7, 2013 at 9:02 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> >
> > I used a new script to create the pull requests this time, hope
> > I got it right now.
>
> So you seem to have blasted this series out with that automated
> script, so they all got sent basically at the same timestamp, and they
> are in the wrong order in my mailbox because email isn't that ordered.
Yep, I'm very sorry about that. The old script I used had been a bit
fragile so I stopped using it for the last few merge windows
but tried something simpler this time. I had the sequence numbers
in the script but forgot to actually write them out in the subject.
> Of course, when there aren't any dependencies between pull requests,
> and the ordering doesn't matter, this isn't an issue. And *most* of
> the time you either have sent out emails by hand (and there's been
> that human delay and they arrived in the right order) or I've just
> been lucky.
I think it's the first time I made /this/ mistake, they were always
numbered in the past, and usually also had distinct time stamps.
> Quite frankly, I'm not going to bother guessing after the first one I
> took was clearly not the right one and gave the wrong diffstat etc, so
> they are all thrown down the toilet.
>
> Nothing pulled.
Yes, of course. It was an obvious mistake and I would have rejected
it the same way coming from my downstream maintainers. Sorry about
bothering you with this and your lenghty reply. I hope you don't
mind the contents, and I'll follow up with the same pull requests
again, using sequence numbers.
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
2013-05-07 17:02 ` [GIT PULL] ARM: Third batch of arm-soc changes for 3.10 Linus Torvalds
2013-05-07 17:19 ` Arnd Bergmann
@ 2013-05-07 17:32 ` Russell King - ARM Linux
2013-05-07 17:42 ` Arnd Bergmann
2013-05-07 17:44 ` Linus Torvalds
1 sibling, 2 replies; 11+ messages in thread
From: Russell King - ARM Linux @ 2013-05-07 17:32 UTC (permalink / raw)
To: Linus Torvalds
Cc: Arnd Bergmann, ARM SoC, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List
On Tue, May 07, 2013 at 10:02:22AM -0700, Linus Torvalds wrote:
> So you seem to have blasted this series out with that automated
> script, so they all got sent basically at the same timestamp, and they
> are in the wrong order in my mailbox because email isn't that ordered.
Interesting. What I received here from the mailing list from Arnd
was:
Date: Tue, 7 May 2013 18:02:09 +0200
Subject: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
Date: Tue, 7 May 2013 18:02:10 +0200
Subject: [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2
Date: Tue, 7 May 2013 18:02:11 +0200
Subject: [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3
Date: Tue, 7 May 2013 18:02:12 +0200
Subject: [GIT PULL] ARM: arm-soc device tree changes, part 2
Date: Tue, 7 May 2013 18:02:13 +0200
Subject: [GIT PULL] ARM: arm-soc: late cleanups
Date: Tue, 7 May 2013 18:02:14 +0200
Subject: [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes
So they do each have a different timestamp, and do come out right if
sorted by date-sent. Maybe one second is not long enough for gmail to
sort by date-sent? Sure, allowing a longer delay reduces the
possibility of stuff being reordered by MTAs, but it will never totally
eliminate that reordering - it just makes it less likely.
FWIR, gmail orders messages by order-of-reception only, not by
date-anything, which makes using delays to try to anticipate the
order of reception quite fruitless. And I suspect gmail doesn't show
you seconds (let alone give you Date: header.)
So I don't think that asking people to play games with delays between
consecutive messages is going to work all that well.
The only sure way would be to have it clearly marked in the subject
line, maybe in a similar way to how we mark patches using a
[GIT PULL N/M] thing.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
2013-05-07 17:32 ` Russell King - ARM Linux
@ 2013-05-07 17:42 ` Arnd Bergmann
2013-05-07 17:44 ` Linus Torvalds
1 sibling, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2013-05-07 17:42 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Linus Torvalds, ARM SoC, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List
On Tuesday 07 May 2013, Russell King - ARM Linux wrote:
> On Tue, May 07, 2013 at 10:02:22AM -0700, Linus Torvalds wrote:
> > So you seem to have blasted this series out with that automated
> > script, so they all got sent basically at the same timestamp, and they
> > are in the wrong order in my mailbox because email isn't that ordered.
>
> Interesting. What I received here from the mailing list from Arnd
> was:
>
> Date: Tue, 7 May 2013 18:02:09 +0200
> Subject: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
>
> Date: Tue, 7 May 2013 18:02:10 +0200
> Subject: [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2
>
> Date: Tue, 7 May 2013 18:02:11 +0200
> Subject: [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3
>
> Date: Tue, 7 May 2013 18:02:12 +0200
> Subject: [GIT PULL] ARM: arm-soc device tree changes, part 2
>
> Date: Tue, 7 May 2013 18:02:13 +0200
> Subject: [GIT PULL] ARM: arm-soc: late cleanups
>
> Date: Tue, 7 May 2013 18:02:14 +0200
> Subject: [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes
>
> So they do each have a different timestamp, and do come out right if
> sorted by date-sent. Maybe one second is not long enough for gmail to
> sort by date-sent? Sure, allowing a longer delay reduces the
> possibility of stuff being reordered by MTAs, but it will never totally
> eliminate that reordering - it just makes it less likely.
Interestingly, the second version (with sequence numbers) has exactly the
same seconds, but 19:26 instead of 18:02 as the hour:minute. There is
probably some intentional logic in there that fills in these numbers.
I'm sure I waited more than a couple of seconds between each email this
time around, where the first time I just sent them all without any delay.
> So I don't think that asking people to play games with delays between
> consecutive messages is going to work all that well.
>
> The only sure way would be to have it clearly marked in the subject
> line, maybe in a similar way to how we mark patches using a
> [GIT PULL N/M] thing.
Yes, that is certainly the right way to do it. I'm also very relieved
that this time lists.infradead.org didn't reject all emails sent in
reply to the introductory mail, which it previously did based on the
ground that it had an "in-reply-to" header to a mail with a different
subject.
Arnd
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [GIT PULL] ARM: Third batch of arm-soc changes for 3.10
2013-05-07 17:32 ` Russell King - ARM Linux
2013-05-07 17:42 ` Arnd Bergmann
@ 2013-05-07 17:44 ` Linus Torvalds
1 sibling, 0 replies; 11+ messages in thread
From: Linus Torvalds @ 2013-05-07 17:44 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Arnd Bergmann, ARM SoC, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List
On Tue, May 7, 2013 at 10:32 AM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
>
> So I don't think that asking people to play games with delays between
> consecutive messages is going to work all that well.
Actually, since this has happened before (a lot) with patch series,
I'm pretty sure it helps.
I used to get re-ordered patches from Andrew all the time, and asked
him to try to avoid it (yes, he also numbers them well, but alpine -
which is what I used for batching email when there are lots of patches
- had this annoying habit of ignoring the "[PATCH n]" part when asked
to sort subject alphabetically). These days, he seems to put a delay
of a second between his patch-bombings these days, and that has almost
entirely solved the problem (so in a series of over a hundred, I
seldom get any renumbering at all, and fixing it up manually if it
happens is much easier now).
But yes, it probably depends very much on where things get sent from,
and in particular if you have some slow SMTP server in one of the
hops. So it's possible that the reason I don't see it with Andrew any
more is simply due to issues like that.
Linus
^ permalink raw reply [flat|nested] 11+ messages in thread