[PATCHv6 0/3] mfd: sec-core: Add support S2MPU02 PMIC device

[PATCHv6 0/3] mfd: sec-core: Add support S2MPU02 PMIC device

[Chanwoo Choi]

This patchset add Samsung S2MPU02 PMIC device driver in exiting S2MPS11 PMIC
driver because S2MPU02 has a little different between S2MPU02 and S2MPS1x.
The S2MPU02 PMIC has LDO[1-28] and BUCK[1-7] regulators.

Changes from v5:
- Remove the duplicate code about mfd_add_devices() and regmap_add_irq_chip()
- Add acked message by Lee Jones for mfd patch on patch2

Changes from v4:
- This patchset is rebased on 'Linux 3.16-rc1'.

Changes from v3:
- Fix bug of s2mps14_regulator_set_suspend_disable()

Changes from v2:
- Change patchset name
- Remove un-necessary switch statement
- Add acked message by Mark Brown for regulator patch
- Add reviewed message by Krzysztof Kozlowski for all patchs

Changes from v1:
- Fix typo about patch description
- Use existing suspend_state variable instead of defining new variable for S2MPU02
- Remove unnecessary parameter of s2mps11_pmic_dt_parse()
- Remove unfit comment of s2mpu02.h file
- Both patch2 and patch3 should be squashed on patch2

Chanwoo Choi (3):
  mfd: sec-core: Add support for S2MPU02 device
  regulator: s2mps11: Add support S2MPU02 regulator device
  dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC

 Documentation/devicetree/bindings/mfd/s2mps11.txt |   7 +-
 drivers/mfd/sec-core.c                            |  71 ++++-
 drivers/mfd/sec-irq.c                             | 110 ++++++--
 drivers/regulator/s2mps11.c                       | 321 ++++++++++++++++++++--
 include/linux/mfd/samsung/core.h                  |   1 +
 include/linux/mfd/samsung/irq.h                   |  24 ++
 include/linux/mfd/samsung/s2mpu02.h               | 201 ++++++++++++++
 7 files changed, 682 insertions(+), 53 deletions(-)
 create mode 100644 include/linux/mfd/samsung/s2mpu02.h

-- 
1.8.0

[PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device

[Chanwoo Choi]

Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
The S2MPU02 device includes PMIC/RTC/Clock devices.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/mfd/sec-core.c           |  46 +++++++++++-----
 drivers/mfd/sec-irq.c            | 110 +++++++++++++++++++++++++++++++++------
 include/linux/mfd/samsung/core.h |   1 +
 include/linux/mfd/samsung/irq.h  |  24 +++++++++
 4 files changed, 151 insertions(+), 30 deletions(-)

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index be06d0a..15ba847 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -89,6 +89,15 @@ static const struct mfd_cell s2mpa01_devs[] = {
 	},
 };
 
+static const struct mfd_cell s2mpu02_devs[] = {
+	{ .name = "s2mpu02-pmic", },
+	{ .name = "s2mpu02-rtc", },
+	{
+		.name = "s2mpu02-clk",
+		.of_compatible = "samsung,s2mpu02-clk",
+	}
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s5m8767-pmic",
@@ -103,6 +112,9 @@ static const struct of_device_id sec_dt_match[] = {
 		.compatible = "samsung,s2mpa01-pmic",
 		.data = (void *)S2MPA01,
 	}, {
+		.compatible = "samsung,s2mpu02-pmic",
+		.data = (void *)S2MPU02,
+	}, {
 		/* Sentinel */
 	},
 };
@@ -250,9 +262,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 {
 	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	const struct regmap_config *regmap;
+	const struct mfd_cell *sec_devs;
 	struct sec_pmic_dev *sec_pmic;
 	unsigned long device_type;
-	int ret;
+	int ret, num_sec_devs;
 
 	sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
 				GFP_KERNEL);
@@ -319,34 +332,39 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 
 	switch (sec_pmic->device_type) {
 	case S5M8751X:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
-				      ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
+		sec_devs = s5m8751_devs;
+		num_sec_devs = ARRAY_SIZE(s5m8751_devs);
 		break;
 	case S5M8763X:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
-				      ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
+		sec_devs = s5m8763_devs;
+		num_sec_devs = ARRAY_SIZE(s5m8763_devs);
 		break;
 	case S5M8767X:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
-				      ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
+		sec_devs = s5m8767_devs;
+		num_sec_devs = ARRAY_SIZE(s5m8767_devs);
 		break;
 	case S2MPA01:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
-				      ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
+		sec_devs = s2mpa01_devs;
+		num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
 		break;
 	case S2MPS11X:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
-				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
+		sec_devs = s2mps11_devs;
+		num_sec_devs = ARRAY_SIZE(s2mps11_devs);
 		break;
 	case S2MPS14X:
-		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
-				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+		sec_devs = s2mps14_devs;
+		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
+		break;
+	case S2MPU02:
+		sec_devs = s2mpu02_devs;
+		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
 		break;
 	default:
 		/* If this happens the probe function is problem */
 		BUG();
 	}
-
+	ret = mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs, NULL,
+			      0, NULL);
 	if (ret)
 		goto err_mfd;
 
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 654e2c1..f9a5786 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 
@@ -161,6 +162,77 @@ static const struct regmap_irq s2mps14_irqs[] = {
 	},
 };
 
+static const struct regmap_irq s2mpu02_irqs[] = {
+	[S2MPU02_IRQ_PWRONF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONF_MASK,
+	},
+	[S2MPU02_IRQ_PWRONR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONR_MASK,
+	},
+	[S2MPU02_IRQ_JIGONBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBF_MASK,
+	},
+	[S2MPU02_IRQ_JIGONBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBR_MASK,
+	},
+	[S2MPU02_IRQ_ACOKBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBF_MASK,
+	},
+	[S2MPU02_IRQ_ACOKBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBR_MASK,
+	},
+	[S2MPU02_IRQ_PWRON1S] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRON1S_MASK,
+	},
+	[S2MPU02_IRQ_MRB] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_MRB_MASK,
+	},
+	[S2MPU02_IRQ_RTC60S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC60S_MASK,
+	},
+	[S2MPU02_IRQ_RTCA1] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA1_MASK,
+	},
+	[S2MPU02_IRQ_RTCA0] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
+	},
+	[S2MPU02_IRQ_SMPL] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_SMPL_MASK,
+	},
+	[S2MPU02_IRQ_RTC1S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC1S_MASK,
+	},
+	[S2MPU02_IRQ_WTSR] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_WTSR_MASK,
+	},
+	[S2MPU02_IRQ_INT120C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT120C_MASK,
+	},
+	[S2MPU02_IRQ_INT140C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT140C_MASK,
+	},
+	[S2MPU02_IRQ_TSD] = {
+		.reg_offset = 2,
+		.mask = S2MPS14_IRQ_TSD_MASK,
+	},
+};
+
 static const struct regmap_irq s5m8767_irqs[] = {
 	[S5M8767_IRQ_PWRR] = {
 		.reg_offset = 0,
@@ -327,6 +399,16 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
 	.ack_base = S2MPS14_REG_INT1,
 };
 
+static const struct regmap_irq_chip s2mpu02_irq_chip = {
+	.name = "s2mpu02",
+	.irqs = s2mpu02_irqs,
+	.num_irqs = ARRAY_SIZE(s2mpu02_irqs),
+	.num_regs = 3,
+	.status_base = S2MPU02_REG_INT1,
+	.mask_base = S2MPU02_REG_INT1M,
+	.ack_base = S2MPU02_REG_INT1,
+};
+
 static const struct regmap_irq_chip s5m8767_irq_chip = {
 	.name = "s5m8767",
 	.irqs = s5m8767_irqs,
@@ -351,6 +433,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 {
 	int ret = 0;
 	int type = sec_pmic->device_type;
+	const struct regmap_irq_chip *sec_irq_chip;
 
 	if (!sec_pmic->irq) {
 		dev_warn(sec_pmic->dev,
@@ -361,28 +444,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 
 	switch (type) {
 	case S5M8763X:
-		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				  sec_pmic->irq_base, &s5m8763_irq_chip,
-				  &sec_pmic->irq_data);
+		sec_irq_chip = &s5m8763_irq_chip;
 		break;
 	case S5M8767X:
-		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				  sec_pmic->irq_base, &s5m8767_irq_chip,
-				  &sec_pmic->irq_data);
+		sec_irq_chip = &s5m8767_irq_chip;
 		break;
 	case S2MPS11X:
-		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				  sec_pmic->irq_base, &s2mps11_irq_chip,
-				  &sec_pmic->irq_data);
+		sec_irq_chip = &s2mps11_irq_chip;
 		break;
 	case S2MPS14X:
-		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				  sec_pmic->irq_base, &s2mps14_irq_chip,
-				  &sec_pmic->irq_data);
+		sec_irq_chip = &s2mps14_irq_chip;
+		break;
+	case S2MPU02:
+		sec_irq_chip = &s2mpu02_irq_chip;
 		break;
 	default:
 		dev_err(sec_pmic->dev, "Unknown device type %lu\n",
@@ -390,6 +464,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 		return -EINVAL;
 	}
 
+	ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
+			  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			  sec_pmic->irq_base, sec_irq_chip,
+			  &sec_pmic->irq_data);
 	if (ret != 0) {
 		dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
 		return ret;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 47d8424..b5f73de 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -21,6 +21,7 @@ enum sec_device_type {
 	S2MPA01,
 	S2MPS11X,
 	S2MPS14X,
+	S2MPU02,
 };
 
 /**
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index 1224f44..f35af73 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -129,6 +129,30 @@ enum s2mps14_irq {
 	S2MPS14_IRQ_NR,
 };
 
+enum s2mpu02_irq {
+	S2MPU02_IRQ_PWRONF,
+	S2MPU02_IRQ_PWRONR,
+	S2MPU02_IRQ_JIGONBF,
+	S2MPU02_IRQ_JIGONBR,
+	S2MPU02_IRQ_ACOKBF,
+	S2MPU02_IRQ_ACOKBR,
+	S2MPU02_IRQ_PWRON1S,
+	S2MPU02_IRQ_MRB,
+
+	S2MPU02_IRQ_RTC60S,
+	S2MPU02_IRQ_RTCA1,
+	S2MPU02_IRQ_RTCA0,
+	S2MPU02_IRQ_SMPL,
+	S2MPU02_IRQ_RTC1S,
+	S2MPU02_IRQ_WTSR,
+
+	S2MPU02_IRQ_INT120C,
+	S2MPU02_IRQ_INT140C,
+	S2MPU02_IRQ_TSD,
+
+	S2MPU02_IRQ_NR,
+};
+
 /* Masks for interrupts are the same as in s2mps11 */
 #define S2MPS14_IRQ_TSD_MASK		(1 << 2)
 
-- 
1.8.0

Re: [PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device

[Lee Jones]

> Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
> The S2MPU02 device includes PMIC/RTC/Clock devices.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/mfd/sec-core.c           |  46 +++++++++++-----
>  drivers/mfd/sec-irq.c            | 110 +++++++++++++++++++++++++++++++++------
>  include/linux/mfd/samsung/core.h |   1 +
>  include/linux/mfd/samsung/irq.h  |  24 +++++++++
>  4 files changed, 151 insertions(+), 30 deletions(-)

Looks good now:
  Acked-by: Lee Jones <lee.jones@linaro.org>

Can I just apply this on its own?

> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index be06d0a..15ba847 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -89,6 +89,15 @@ static const struct mfd_cell s2mpa01_devs[] = {
>  	},
>  };
>  
> +static const struct mfd_cell s2mpu02_devs[] = {
> +	{ .name = "s2mpu02-pmic", },
> +	{ .name = "s2mpu02-rtc", },
> +	{
> +		.name = "s2mpu02-clk",
> +		.of_compatible = "samsung,s2mpu02-clk",
> +	}
> +};
> +
>  #ifdef CONFIG_OF
>  static const struct of_device_id sec_dt_match[] = {
>  	{	.compatible = "samsung,s5m8767-pmic",
> @@ -103,6 +112,9 @@ static const struct of_device_id sec_dt_match[] = {
>  		.compatible = "samsung,s2mpa01-pmic",
>  		.data = (void *)S2MPA01,
>  	}, {
> +		.compatible = "samsung,s2mpu02-pmic",
> +		.data = (void *)S2MPU02,
> +	}, {
>  		/* Sentinel */
>  	},
>  };
> @@ -250,9 +262,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
>  {
>  	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
>  	const struct regmap_config *regmap;
> +	const struct mfd_cell *sec_devs;
>  	struct sec_pmic_dev *sec_pmic;
>  	unsigned long device_type;
> -	int ret;
> +	int ret, num_sec_devs;
>  
>  	sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
>  				GFP_KERNEL);
> @@ -319,34 +332,39 @@ static int sec_pmic_probe(struct i2c_client *i2c,
>  
>  	switch (sec_pmic->device_type) {
>  	case S5M8751X:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
> -				      ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
> +		sec_devs = s5m8751_devs;
> +		num_sec_devs = ARRAY_SIZE(s5m8751_devs);
>  		break;
>  	case S5M8763X:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
> -				      ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
> +		sec_devs = s5m8763_devs;
> +		num_sec_devs = ARRAY_SIZE(s5m8763_devs);
>  		break;
>  	case S5M8767X:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
> -				      ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
> +		sec_devs = s5m8767_devs;
> +		num_sec_devs = ARRAY_SIZE(s5m8767_devs);
>  		break;
>  	case S2MPA01:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
> -				      ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
> +		sec_devs = s2mpa01_devs;
> +		num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
>  		break;
>  	case S2MPS11X:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
> -				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
> +		sec_devs = s2mps11_devs;
> +		num_sec_devs = ARRAY_SIZE(s2mps11_devs);
>  		break;
>  	case S2MPS14X:
> -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
> -				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
> +		sec_devs = s2mps14_devs;
> +		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
> +		break;
> +	case S2MPU02:
> +		sec_devs = s2mpu02_devs;
> +		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
>  		break;
>  	default:
>  		/* If this happens the probe function is problem */
>  		BUG();
>  	}
> -
> +	ret = mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs, NULL,
> +			      0, NULL);
>  	if (ret)
>  		goto err_mfd;
>  
> diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> index 654e2c1..f9a5786 100644
> --- a/drivers/mfd/sec-irq.c
> +++ b/drivers/mfd/sec-irq.c
> @@ -20,6 +20,7 @@
>  #include <linux/mfd/samsung/irq.h>
>  #include <linux/mfd/samsung/s2mps11.h>
>  #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mpu02.h>
>  #include <linux/mfd/samsung/s5m8763.h>
>  #include <linux/mfd/samsung/s5m8767.h>
>  
> @@ -161,6 +162,77 @@ static const struct regmap_irq s2mps14_irqs[] = {
>  	},
>  };
>  
> +static const struct regmap_irq s2mpu02_irqs[] = {
> +	[S2MPU02_IRQ_PWRONF] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_PWRONF_MASK,
> +	},
> +	[S2MPU02_IRQ_PWRONR] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_PWRONR_MASK,
> +	},
> +	[S2MPU02_IRQ_JIGONBF] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_JIGONBF_MASK,
> +	},
> +	[S2MPU02_IRQ_JIGONBR] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_JIGONBR_MASK,
> +	},
> +	[S2MPU02_IRQ_ACOKBF] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_ACOKBF_MASK,
> +	},
> +	[S2MPU02_IRQ_ACOKBR] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_ACOKBR_MASK,
> +	},
> +	[S2MPU02_IRQ_PWRON1S] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_PWRON1S_MASK,
> +	},
> +	[S2MPU02_IRQ_MRB] = {
> +		.reg_offset = 0,
> +		.mask = S2MPS11_IRQ_MRB_MASK,
> +	},
> +	[S2MPU02_IRQ_RTC60S] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_RTC60S_MASK,
> +	},
> +	[S2MPU02_IRQ_RTCA1] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_RTCA1_MASK,
> +	},
> +	[S2MPU02_IRQ_RTCA0] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_RTCA0_MASK,
> +	},
> +	[S2MPU02_IRQ_SMPL] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_SMPL_MASK,
> +	},
> +	[S2MPU02_IRQ_RTC1S] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_RTC1S_MASK,
> +	},
> +	[S2MPU02_IRQ_WTSR] = {
> +		.reg_offset = 1,
> +		.mask = S2MPS11_IRQ_WTSR_MASK,
> +	},
> +	[S2MPU02_IRQ_INT120C] = {
> +		.reg_offset = 2,
> +		.mask = S2MPS11_IRQ_INT120C_MASK,
> +	},
> +	[S2MPU02_IRQ_INT140C] = {
> +		.reg_offset = 2,
> +		.mask = S2MPS11_IRQ_INT140C_MASK,
> +	},
> +	[S2MPU02_IRQ_TSD] = {
> +		.reg_offset = 2,
> +		.mask = S2MPS14_IRQ_TSD_MASK,
> +	},
> +};
> +
>  static const struct regmap_irq s5m8767_irqs[] = {
>  	[S5M8767_IRQ_PWRR] = {
>  		.reg_offset = 0,
> @@ -327,6 +399,16 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
>  	.ack_base = S2MPS14_REG_INT1,
>  };
>  
> +static const struct regmap_irq_chip s2mpu02_irq_chip = {
> +	.name = "s2mpu02",
> +	.irqs = s2mpu02_irqs,
> +	.num_irqs = ARRAY_SIZE(s2mpu02_irqs),
> +	.num_regs = 3,
> +	.status_base = S2MPU02_REG_INT1,
> +	.mask_base = S2MPU02_REG_INT1M,
> +	.ack_base = S2MPU02_REG_INT1,
> +};
> +
>  static const struct regmap_irq_chip s5m8767_irq_chip = {
>  	.name = "s5m8767",
>  	.irqs = s5m8767_irqs,
> @@ -351,6 +433,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
>  {
>  	int ret = 0;
>  	int type = sec_pmic->device_type;
> +	const struct regmap_irq_chip *sec_irq_chip;
>  
>  	if (!sec_pmic->irq) {
>  		dev_warn(sec_pmic->dev,
> @@ -361,28 +444,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
>  
>  	switch (type) {
>  	case S5M8763X:
> -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				  sec_pmic->irq_base, &s5m8763_irq_chip,
> -				  &sec_pmic->irq_data);
> +		sec_irq_chip = &s5m8763_irq_chip;
>  		break;
>  	case S5M8767X:
> -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				  sec_pmic->irq_base, &s5m8767_irq_chip,
> -				  &sec_pmic->irq_data);
> +		sec_irq_chip = &s5m8767_irq_chip;
>  		break;
>  	case S2MPS11X:
> -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				  sec_pmic->irq_base, &s2mps11_irq_chip,
> -				  &sec_pmic->irq_data);
> +		sec_irq_chip = &s2mps11_irq_chip;
>  		break;
>  	case S2MPS14X:
> -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				  sec_pmic->irq_base, &s2mps14_irq_chip,
> -				  &sec_pmic->irq_data);
> +		sec_irq_chip = &s2mps14_irq_chip;
> +		break;
> +	case S2MPU02:
> +		sec_irq_chip = &s2mpu02_irq_chip;
>  		break;
>  	default:
>  		dev_err(sec_pmic->dev, "Unknown device type %lu\n",
> @@ -390,6 +464,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
>  		return -EINVAL;
>  	}
>  
> +	ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> +			  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +			  sec_pmic->irq_base, sec_irq_chip,
> +			  &sec_pmic->irq_data);
>  	if (ret != 0) {
>  		dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
>  		return ret;
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 47d8424..b5f73de 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -21,6 +21,7 @@ enum sec_device_type {
>  	S2MPA01,
>  	S2MPS11X,
>  	S2MPS14X,
> +	S2MPU02,
>  };
>  
>  /**
> diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> index 1224f44..f35af73 100644
> --- a/include/linux/mfd/samsung/irq.h
> +++ b/include/linux/mfd/samsung/irq.h
> @@ -129,6 +129,30 @@ enum s2mps14_irq {
>  	S2MPS14_IRQ_NR,
>  };
>  
> +enum s2mpu02_irq {
> +	S2MPU02_IRQ_PWRONF,
> +	S2MPU02_IRQ_PWRONR,
> +	S2MPU02_IRQ_JIGONBF,
> +	S2MPU02_IRQ_JIGONBR,
> +	S2MPU02_IRQ_ACOKBF,
> +	S2MPU02_IRQ_ACOKBR,
> +	S2MPU02_IRQ_PWRON1S,
> +	S2MPU02_IRQ_MRB,
> +
> +	S2MPU02_IRQ_RTC60S,
> +	S2MPU02_IRQ_RTCA1,
> +	S2MPU02_IRQ_RTCA0,
> +	S2MPU02_IRQ_SMPL,
> +	S2MPU02_IRQ_RTC1S,
> +	S2MPU02_IRQ_WTSR,
> +
> +	S2MPU02_IRQ_INT120C,
> +	S2MPU02_IRQ_INT140C,
> +	S2MPU02_IRQ_TSD,
> +
> +	S2MPU02_IRQ_NR,
> +};
> +
>  /* Masks for interrupts are the same as in s2mps11 */
>  #define S2MPS14_IRQ_TSD_MASK		(1 << 2)
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device

[Lee Jones]

On Wed, 18 Jun 2014, Lee Jones wrote:

> > Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
> > The S2MPU02 device includes PMIC/RTC/Clock devices.
> > 
> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > ---
> >  drivers/mfd/sec-core.c           |  46 +++++++++++-----
> >  drivers/mfd/sec-irq.c            | 110 +++++++++++++++++++++++++++++++++------
> >  include/linux/mfd/samsung/core.h |   1 +
> >  include/linux/mfd/samsung/irq.h  |  24 +++++++++
> >  4 files changed, 151 insertions(+), 30 deletions(-)
> 
> Looks good now:
>   Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> Can I just apply this on its own?

Ignore this - you answered it on the previous version.

I'm going to apply this patch.

> > diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> > index be06d0a..15ba847 100644
> > --- a/drivers/mfd/sec-core.c
> > +++ b/drivers/mfd/sec-core.c
> > @@ -89,6 +89,15 @@ static const struct mfd_cell s2mpa01_devs[] = {
> >  	},
> >  };
> >  
> > +static const struct mfd_cell s2mpu02_devs[] = {
> > +	{ .name = "s2mpu02-pmic", },
> > +	{ .name = "s2mpu02-rtc", },
> > +	{
> > +		.name = "s2mpu02-clk",
> > +		.of_compatible = "samsung,s2mpu02-clk",
> > +	}
> > +};
> > +
> >  #ifdef CONFIG_OF
> >  static const struct of_device_id sec_dt_match[] = {
> >  	{	.compatible = "samsung,s5m8767-pmic",
> > @@ -103,6 +112,9 @@ static const struct of_device_id sec_dt_match[] = {
> >  		.compatible = "samsung,s2mpa01-pmic",
> >  		.data = (void *)S2MPA01,
> >  	}, {
> > +		.compatible = "samsung,s2mpu02-pmic",
> > +		.data = (void *)S2MPU02,
> > +	}, {
> >  		/* Sentinel */
> >  	},
> >  };
> > @@ -250,9 +262,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
> >  {
> >  	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
> >  	const struct regmap_config *regmap;
> > +	const struct mfd_cell *sec_devs;
> >  	struct sec_pmic_dev *sec_pmic;
> >  	unsigned long device_type;
> > -	int ret;
> > +	int ret, num_sec_devs;
> >  
> >  	sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
> >  				GFP_KERNEL);
> > @@ -319,34 +332,39 @@ static int sec_pmic_probe(struct i2c_client *i2c,
> >  
> >  	switch (sec_pmic->device_type) {
> >  	case S5M8751X:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
> > -				      ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
> > +		sec_devs = s5m8751_devs;
> > +		num_sec_devs = ARRAY_SIZE(s5m8751_devs);
> >  		break;
> >  	case S5M8763X:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
> > -				      ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
> > +		sec_devs = s5m8763_devs;
> > +		num_sec_devs = ARRAY_SIZE(s5m8763_devs);
> >  		break;
> >  	case S5M8767X:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
> > -				      ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
> > +		sec_devs = s5m8767_devs;
> > +		num_sec_devs = ARRAY_SIZE(s5m8767_devs);
> >  		break;
> >  	case S2MPA01:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
> > -				      ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
> > +		sec_devs = s2mpa01_devs;
> > +		num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
> >  		break;
> >  	case S2MPS11X:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
> > -				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
> > +		sec_devs = s2mps11_devs;
> > +		num_sec_devs = ARRAY_SIZE(s2mps11_devs);
> >  		break;
> >  	case S2MPS14X:
> > -		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
> > -				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
> > +		sec_devs = s2mps14_devs;
> > +		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
> > +		break;
> > +	case S2MPU02:
> > +		sec_devs = s2mpu02_devs;
> > +		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
> >  		break;
> >  	default:
> >  		/* If this happens the probe function is problem */
> >  		BUG();
> >  	}
> > -
> > +	ret = mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs, NULL,
> > +			      0, NULL);
> >  	if (ret)
> >  		goto err_mfd;
> >  
> > diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> > index 654e2c1..f9a5786 100644
> > --- a/drivers/mfd/sec-irq.c
> > +++ b/drivers/mfd/sec-irq.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/mfd/samsung/irq.h>
> >  #include <linux/mfd/samsung/s2mps11.h>
> >  #include <linux/mfd/samsung/s2mps14.h>
> > +#include <linux/mfd/samsung/s2mpu02.h>
> >  #include <linux/mfd/samsung/s5m8763.h>
> >  #include <linux/mfd/samsung/s5m8767.h>
> >  
> > @@ -161,6 +162,77 @@ static const struct regmap_irq s2mps14_irqs[] = {
> >  	},
> >  };
> >  
> > +static const struct regmap_irq s2mpu02_irqs[] = {
> > +	[S2MPU02_IRQ_PWRONF] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_PWRONF_MASK,
> > +	},
> > +	[S2MPU02_IRQ_PWRONR] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_PWRONR_MASK,
> > +	},
> > +	[S2MPU02_IRQ_JIGONBF] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_JIGONBF_MASK,
> > +	},
> > +	[S2MPU02_IRQ_JIGONBR] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_JIGONBR_MASK,
> > +	},
> > +	[S2MPU02_IRQ_ACOKBF] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_ACOKBF_MASK,
> > +	},
> > +	[S2MPU02_IRQ_ACOKBR] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_ACOKBR_MASK,
> > +	},
> > +	[S2MPU02_IRQ_PWRON1S] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_PWRON1S_MASK,
> > +	},
> > +	[S2MPU02_IRQ_MRB] = {
> > +		.reg_offset = 0,
> > +		.mask = S2MPS11_IRQ_MRB_MASK,
> > +	},
> > +	[S2MPU02_IRQ_RTC60S] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_RTC60S_MASK,
> > +	},
> > +	[S2MPU02_IRQ_RTCA1] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_RTCA1_MASK,
> > +	},
> > +	[S2MPU02_IRQ_RTCA0] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_RTCA0_MASK,
> > +	},
> > +	[S2MPU02_IRQ_SMPL] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_SMPL_MASK,
> > +	},
> > +	[S2MPU02_IRQ_RTC1S] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_RTC1S_MASK,
> > +	},
> > +	[S2MPU02_IRQ_WTSR] = {
> > +		.reg_offset = 1,
> > +		.mask = S2MPS11_IRQ_WTSR_MASK,
> > +	},
> > +	[S2MPU02_IRQ_INT120C] = {
> > +		.reg_offset = 2,
> > +		.mask = S2MPS11_IRQ_INT120C_MASK,
> > +	},
> > +	[S2MPU02_IRQ_INT140C] = {
> > +		.reg_offset = 2,
> > +		.mask = S2MPS11_IRQ_INT140C_MASK,
> > +	},
> > +	[S2MPU02_IRQ_TSD] = {
> > +		.reg_offset = 2,
> > +		.mask = S2MPS14_IRQ_TSD_MASK,
> > +	},
> > +};
> > +
> >  static const struct regmap_irq s5m8767_irqs[] = {
> >  	[S5M8767_IRQ_PWRR] = {
> >  		.reg_offset = 0,
> > @@ -327,6 +399,16 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
> >  	.ack_base = S2MPS14_REG_INT1,
> >  };
> >  
> > +static const struct regmap_irq_chip s2mpu02_irq_chip = {
> > +	.name = "s2mpu02",
> > +	.irqs = s2mpu02_irqs,
> > +	.num_irqs = ARRAY_SIZE(s2mpu02_irqs),
> > +	.num_regs = 3,
> > +	.status_base = S2MPU02_REG_INT1,
> > +	.mask_base = S2MPU02_REG_INT1M,
> > +	.ack_base = S2MPU02_REG_INT1,
> > +};
> > +
> >  static const struct regmap_irq_chip s5m8767_irq_chip = {
> >  	.name = "s5m8767",
> >  	.irqs = s5m8767_irqs,
> > @@ -351,6 +433,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> >  {
> >  	int ret = 0;
> >  	int type = sec_pmic->device_type;
> > +	const struct regmap_irq_chip *sec_irq_chip;
> >  
> >  	if (!sec_pmic->irq) {
> >  		dev_warn(sec_pmic->dev,
> > @@ -361,28 +444,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> >  
> >  	switch (type) {
> >  	case S5M8763X:
> > -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > -				  sec_pmic->irq_base, &s5m8763_irq_chip,
> > -				  &sec_pmic->irq_data);
> > +		sec_irq_chip = &s5m8763_irq_chip;
> >  		break;
> >  	case S5M8767X:
> > -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > -				  sec_pmic->irq_base, &s5m8767_irq_chip,
> > -				  &sec_pmic->irq_data);
> > +		sec_irq_chip = &s5m8767_irq_chip;
> >  		break;
> >  	case S2MPS11X:
> > -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > -				  sec_pmic->irq_base, &s2mps11_irq_chip,
> > -				  &sec_pmic->irq_data);
> > +		sec_irq_chip = &s2mps11_irq_chip;
> >  		break;
> >  	case S2MPS14X:
> > -		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > -				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > -				  sec_pmic->irq_base, &s2mps14_irq_chip,
> > -				  &sec_pmic->irq_data);
> > +		sec_irq_chip = &s2mps14_irq_chip;
> > +		break;
> > +	case S2MPU02:
> > +		sec_irq_chip = &s2mpu02_irq_chip;
> >  		break;
> >  	default:
> >  		dev_err(sec_pmic->dev, "Unknown device type %lu\n",
> > @@ -390,6 +464,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> >  		return -EINVAL;
> >  	}
> >  
> > +	ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > +			  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +			  sec_pmic->irq_base, sec_irq_chip,
> > +			  &sec_pmic->irq_data);
> >  	if (ret != 0) {
> >  		dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
> >  		return ret;
> > diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> > index 47d8424..b5f73de 100644
> > --- a/include/linux/mfd/samsung/core.h
> > +++ b/include/linux/mfd/samsung/core.h
> > @@ -21,6 +21,7 @@ enum sec_device_type {
> >  	S2MPA01,
> >  	S2MPS11X,
> >  	S2MPS14X,
> > +	S2MPU02,
> >  };
> >  
> >  /**
> > diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> > index 1224f44..f35af73 100644
> > --- a/include/linux/mfd/samsung/irq.h
> > +++ b/include/linux/mfd/samsung/irq.h
> > @@ -129,6 +129,30 @@ enum s2mps14_irq {
> >  	S2MPS14_IRQ_NR,
> >  };
> >  
> > +enum s2mpu02_irq {
> > +	S2MPU02_IRQ_PWRONF,
> > +	S2MPU02_IRQ_PWRONR,
> > +	S2MPU02_IRQ_JIGONBF,
> > +	S2MPU02_IRQ_JIGONBR,
> > +	S2MPU02_IRQ_ACOKBF,
> > +	S2MPU02_IRQ_ACOKBR,
> > +	S2MPU02_IRQ_PWRON1S,
> > +	S2MPU02_IRQ_MRB,
> > +
> > +	S2MPU02_IRQ_RTC60S,
> > +	S2MPU02_IRQ_RTCA1,
> > +	S2MPU02_IRQ_RTCA0,
> > +	S2MPU02_IRQ_SMPL,
> > +	S2MPU02_IRQ_RTC1S,
> > +	S2MPU02_IRQ_WTSR,
> > +
> > +	S2MPU02_IRQ_INT120C,
> > +	S2MPU02_IRQ_INT140C,
> > +	S2MPU02_IRQ_TSD,
> > +
> > +	S2MPU02_IRQ_NR,
> > +};
> > +
> >  /* Masks for interrupts are the same as in s2mps11 */
> >  #define S2MPS14_IRQ_TSD_MASK		(1 << 2)
> >  
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device

[Chanwoo Choi]

This patch add S2MPU02 regulator device to existing S2MPS11 device driver
because of little difference between S2MPS1x and S2MPU02. The S2MPU02
regulator device includes LDO[1-28] and BUCK[1-7].

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee]
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/sec-core.c              |  25 +++
 drivers/regulator/s2mps11.c         | 321 +++++++++++++++++++++++++++++++++---
 include/linux/mfd/samsung/s2mpu02.h | 201 ++++++++++++++++++++++
 3 files changed, 526 insertions(+), 21 deletions(-)
 create mode 100644 include/linux/mfd/samsung/s2mpu02.h

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 15ba847..2621328 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -28,6 +28,7 @@
 #include <linux/mfd/samsung/s2mpa01.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regmap.h>
@@ -144,6 +145,18 @@ static bool s2mps11_volatile(struct device *dev, unsigned int reg)
 	}
 }
 
+static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPU02_REG_INT1M:
+	case S2MPU02_REG_INT2M:
+	case S2MPU02_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
 static bool s5m8763_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -189,6 +202,15 @@ static const struct regmap_config s2mps14_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mpu02_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPU02_REG_DVSDATA,
+	.volatile_reg = s2mpu02_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s5m8763_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -310,6 +332,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
 		break;
+	case S2MPU02:
+		regmap = &s2mpu02_regmap_config;
+		break;
 	default:
 		regmap = &sec_regmap_config;
 		break;
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 02e2fb2..2daacc6 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -31,6 +31,7 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
 
 struct s2mps11_info {
 	unsigned int rdev_num;
@@ -40,11 +41,15 @@ struct s2mps11_info {
 	int ramp_delay16;
 	int ramp_delay7810;
 	int ramp_delay9;
+
+	enum sec_device_type dev_type;
+
 	/*
-	 * One bit for each S2MPS14 regulator whether the suspend mode
+	 * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
 	 * was enabled.
 	 */
-	unsigned int s2mps14_suspend_state:30;
+	unsigned long long s2mps14_suspend_state:35;
+
 	/* Array of size rdev_num with GPIO-s for external sleep control */
 	int *ext_control_gpio;
 };
@@ -415,12 +420,24 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 	struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
 	unsigned int val;
 
-	if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
-		val = S2MPS14_ENABLE_SUSPEND;
-	else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
-		val = S2MPS14_ENABLE_EXT_CONTROL;
-	else
-		val = rdev->desc->enable_mask;
+	switch (s2mps11->dev_type) {
+	case S2MPS14X:
+		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+			val = S2MPS14_ENABLE_SUSPEND;
+		else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
+			val = S2MPS14_ENABLE_EXT_CONTROL;
+		else
+			val = rdev->desc->enable_mask;
+		break;
+	case S2MPU02:
+		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+			val = S2MPU02_ENABLE_SUSPEND;
+		else
+			val = rdev->desc->enable_mask;
+		break;
+	default:
+		return -EINVAL;
+	};
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 			rdev->desc->enable_mask, val);
@@ -429,12 +446,38 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 {
 	int ret;
-	unsigned int val;
+	unsigned int val, state;
 	struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+	int rdev_id = rdev_get_id(rdev);
 
-	/* LDO3 should be always on and does not support suspend mode */
-	if (rdev_get_id(rdev) == S2MPS14_LDO3)
-		return 0;
+	/* Below LDO should be always on or does not support suspend mode. */
+	switch (s2mps11->dev_type) {
+	case S2MPS14X:
+		switch (rdev_id) {
+		case S2MPS14_LDO3:
+			return 0;
+		default:
+			state = S2MPS14_ENABLE_SUSPEND;
+			break;
+		};
+		break;
+	case S2MPU02:
+		switch (rdev_id) {
+		case S2MPU02_LDO13:
+		case S2MPU02_LDO14:
+		case S2MPU02_LDO15:
+		case S2MPU02_LDO17:
+		case S2MPU02_BUCK7:
+			state = S2MPU02_DISABLE_SUSPEND;
+			break;
+		default:
+			state = S2MPU02_ENABLE_SUSPEND;
+			break;
+		};
+		break;
+	default:
+		return -EINVAL;
+	};
 
 	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 	if (ret < 0)
@@ -452,7 +495,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 		return 0;
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-			rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND);
+			rdev->desc->enable_mask, state);
 }
 
 static struct regulator_ops s2mps14_reg_ops = {
@@ -605,8 +648,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 }
 
 static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
-		struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
-		enum sec_device_type dev_type)
+		struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
 {
 	struct device_node *reg_np;
 
@@ -617,7 +659,7 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
 	}
 
 	of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
-	if (dev_type == S2MPS14X)
+	if (s2mps11->dev_type == S2MPS14X)
 		s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
 
 	of_node_put(reg_np);
@@ -625,6 +667,238 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
 	return 0;
 }
 
+static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+	unsigned int ramp_val, ramp_shift, ramp_reg;
+
+	switch (rdev_get_id(rdev)) {
+	case S2MPU02_BUCK1:
+		ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
+		break;
+	case S2MPU02_BUCK2:
+		ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
+		break;
+	case S2MPU02_BUCK3:
+		ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
+		break;
+	case S2MPU02_BUCK4:
+		ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+	ramp_reg = S2MPU02_REG_RAMP1;
+	ramp_val = get_ramp_delay(ramp_delay);
+
+	return regmap_update_bits(rdev->regmap, ramp_reg,
+				  S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
+				  ramp_val << ramp_shift);
+}
+
+static struct regulator_ops s2mpu02_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= s2mps14_regulator_enable,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_disable	= s2mps14_regulator_set_suspend_disable,
+};
+
+static struct regulator_ops s2mpu02_buck_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= s2mps14_regulator_enable,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_disable	= s2mps14_regulator_set_suspend_disable,
+	.set_ramp_delay		= s2mpu02_set_ramp_delay,
+};
+
+#define regulator_desc_s2mpu02_ldo1(num) {		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPU02_LDO##num,		\
+	.ops		= &s2mpu02_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPU02_LDO_MIN_900MV,	\
+	.uV_step	= S2MPU02_LDO_STEP_12_5MV,	\
+	.linear_min_sel	= S2MPU02_LDO_GROUP1_START_SEL,	\
+	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPU02_REG_L1CTRL,		\
+	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPU02_REG_L1CTRL,		\
+	.enable_mask	= S2MPU02_ENABLE_MASK		\
+}
+#define regulator_desc_s2mpu02_ldo2(num) {		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPU02_LDO##num,		\
+	.ops		= &s2mpu02_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPU02_LDO_MIN_1050MV,	\
+	.uV_step	= S2MPU02_LDO_STEP_25MV,	\
+	.linear_min_sel	= S2MPU02_LDO_GROUP2_START_SEL,	\
+	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPU02_REG_L2CTRL1,		\
+	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPU02_REG_L2CTRL1,		\
+	.enable_mask	= S2MPU02_ENABLE_MASK		\
+}
+#define regulator_desc_s2mpu02_ldo3(num) {		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPU02_LDO##num,		\
+	.ops		= &s2mpu02_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPU02_LDO_MIN_900MV,	\
+	.uV_step	= S2MPU02_LDO_STEP_12_5MV,	\
+	.linear_min_sel	= S2MPU02_LDO_GROUP1_START_SEL,	\
+	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.enable_mask	= S2MPU02_ENABLE_MASK		\
+}
+#define regulator_desc_s2mpu02_ldo4(num) {		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPU02_LDO##num,		\
+	.ops		= &s2mpu02_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPU02_LDO_MIN_1050MV,	\
+	.uV_step	= S2MPU02_LDO_STEP_25MV,	\
+	.linear_min_sel	= S2MPU02_LDO_GROUP2_START_SEL,	\
+	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.enable_mask	= S2MPU02_ENABLE_MASK		\
+}
+#define regulator_desc_s2mpu02_ldo5(num) {		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPU02_LDO##num,		\
+	.ops		= &s2mpu02_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPU02_LDO_MIN_1600MV,	\
+	.uV_step	= S2MPU02_LDO_STEP_50MV,	\
+	.linear_min_sel	= S2MPU02_LDO_GROUP3_START_SEL,	\
+	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
+	.enable_mask	= S2MPU02_ENABLE_MASK		\
+}
+
+#define regulator_desc_s2mpu02_buck1234(num) {			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPU02_BUCK##num,			\
+	.ops		= &s2mpu02_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPU02_BUCK1234_MIN_600MV,		\
+	.uV_step	= S2MPU02_BUCK1234_STEP_6_25MV,		\
+	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
+	.linear_min_sel = S2MPU02_BUCK1234_START_SEL,		\
+	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPU02_REG_B1CTRL2 + (num - 1) * 2,	\
+	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPU02_REG_B1CTRL1 + (num - 1) * 2,	\
+	.enable_mask	= S2MPU02_ENABLE_MASK			\
+}
+#define regulator_desc_s2mpu02_buck5(num) {			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPU02_BUCK##num,			\
+	.ops		= &s2mpu02_ldo_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPU02_BUCK5_MIN_1081_25MV,		\
+	.uV_step	= S2MPU02_BUCK5_STEP_6_25MV,		\
+	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
+	.linear_min_sel = S2MPU02_BUCK5_START_SEL,		\
+	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPU02_REG_B5CTRL2,			\
+	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPU02_REG_B5CTRL1,			\
+	.enable_mask	= S2MPU02_ENABLE_MASK			\
+}
+#define regulator_desc_s2mpu02_buck6(num) {			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPU02_BUCK##num,			\
+	.ops		= &s2mpu02_ldo_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPU02_BUCK6_MIN_1700MV,		\
+	.uV_step	= S2MPU02_BUCK6_STEP_2_50MV,		\
+	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
+	.linear_min_sel = S2MPU02_BUCK6_START_SEL,		\
+	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPU02_REG_B6CTRL2,			\
+	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPU02_REG_B6CTRL1,			\
+	.enable_mask	= S2MPU02_ENABLE_MASK			\
+}
+#define regulator_desc_s2mpu02_buck7(num) {			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPU02_BUCK##num,			\
+	.ops		= &s2mpu02_ldo_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPU02_BUCK7_MIN_900MV,		\
+	.uV_step	= S2MPU02_BUCK7_STEP_6_25MV,		\
+	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
+	.linear_min_sel = S2MPU02_BUCK7_START_SEL,		\
+	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPU02_REG_B7CTRL2,			\
+	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPU02_REG_B7CTRL1,			\
+	.enable_mask	= S2MPU02_ENABLE_MASK			\
+}
+
+static const struct regulator_desc s2mpu02_regulators[] = {
+	regulator_desc_s2mpu02_ldo1(1),
+	regulator_desc_s2mpu02_ldo2(2),
+	regulator_desc_s2mpu02_ldo4(3),
+	regulator_desc_s2mpu02_ldo5(4),
+	regulator_desc_s2mpu02_ldo4(5),
+	regulator_desc_s2mpu02_ldo3(6),
+	regulator_desc_s2mpu02_ldo3(7),
+	regulator_desc_s2mpu02_ldo4(8),
+	regulator_desc_s2mpu02_ldo5(9),
+	regulator_desc_s2mpu02_ldo3(10),
+	regulator_desc_s2mpu02_ldo4(11),
+	regulator_desc_s2mpu02_ldo5(12),
+	regulator_desc_s2mpu02_ldo5(13),
+	regulator_desc_s2mpu02_ldo5(14),
+	regulator_desc_s2mpu02_ldo5(15),
+	regulator_desc_s2mpu02_ldo5(16),
+	regulator_desc_s2mpu02_ldo4(17),
+	regulator_desc_s2mpu02_ldo5(18),
+	regulator_desc_s2mpu02_ldo3(19),
+	regulator_desc_s2mpu02_ldo4(20),
+	regulator_desc_s2mpu02_ldo5(21),
+	regulator_desc_s2mpu02_ldo5(22),
+	regulator_desc_s2mpu02_ldo5(23),
+	regulator_desc_s2mpu02_ldo4(24),
+	regulator_desc_s2mpu02_ldo5(25),
+	regulator_desc_s2mpu02_ldo4(26),
+	regulator_desc_s2mpu02_ldo5(27),
+	regulator_desc_s2mpu02_ldo5(28),
+	regulator_desc_s2mpu02_buck1234(1),
+	regulator_desc_s2mpu02_buck1234(2),
+	regulator_desc_s2mpu02_buck1234(3),
+	regulator_desc_s2mpu02_buck1234(4),
+	regulator_desc_s2mpu02_buck5(5),
+	regulator_desc_s2mpu02_buck6(6),
+	regulator_desc_s2mpu02_buck7(7),
+};
+
 static int s2mps11_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +908,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	struct s2mps11_info *s2mps11;
 	int i, ret = 0;
 	const struct regulator_desc *regulators;
-	enum sec_device_type dev_type;
 
 	s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
 				GFP_KERNEL);
 	if (!s2mps11)
 		return -ENOMEM;
 
-	dev_type = platform_get_device_id(pdev)->driver_data;
-	switch (dev_type) {
+	s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
+	switch (s2mps11->dev_type) {
 	case S2MPS11X:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
 		regulators = s2mps11_regulators;
@@ -651,8 +924,13 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
 		regulators = s2mps14_regulators;
 		break;
+	case S2MPU02:
+		s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
+		regulators = s2mpu02_regulators;
+		break;
 	default:
-		dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type);
+		dev_err(&pdev->dev, "Invalid device type: %u\n",
+				    s2mps11->dev_type);
 		return -EINVAL;
 	};
 
@@ -686,7 +964,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	for (i = 0; i < s2mps11->rdev_num; i++)
 		rdata[i].name = regulators[i].name;
 
-	ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, dev_type);
+	ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
 	if (ret)
 		goto out;
 
@@ -739,6 +1017,7 @@ out:
 static const struct platform_device_id s2mps11_pmic_id[] = {
 	{ "s2mps11-pmic", S2MPS11X},
 	{ "s2mps14-pmic", S2MPS14X},
+	{ "s2mpu02-pmic", S2MPU02},
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
diff --git a/include/linux/mfd/samsung/s2mpu02.h b/include/linux/mfd/samsung/s2mpu02.h
new file mode 100644
index 0000000..47ae9bc
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mpu02.h
@@ -0,0 +1,201 @@
+/*
+ * s2mpu02.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPU02_H
+#define __LINUX_MFD_S2MPU02_H
+
+/* S2MPU02 registers */
+enum S2MPU02_reg {
+	S2MPU02_REG_ID,
+	S2MPU02_REG_INT1,
+	S2MPU02_REG_INT2,
+	S2MPU02_REG_INT3,
+	S2MPU02_REG_INT1M,
+	S2MPU02_REG_INT2M,
+	S2MPU02_REG_INT3M,
+	S2MPU02_REG_ST1,
+	S2MPU02_REG_ST2,
+	S2MPU02_REG_PWRONSRC,
+	S2MPU02_REG_OFFSRC,
+	S2MPU02_REG_BU_CHG,
+	S2MPU02_REG_RTCCTRL,
+	S2MPU02_REG_PMCTRL1,
+	S2MPU02_REG_RSVD1,
+	S2MPU02_REG_RSVD2,
+	S2MPU02_REG_RSVD3,
+	S2MPU02_REG_RSVD4,
+	S2MPU02_REG_RSVD5,
+	S2MPU02_REG_RSVD6,
+	S2MPU02_REG_RSVD7,
+	S2MPU02_REG_WRSTEN,
+	S2MPU02_REG_RSVD8,
+	S2MPU02_REG_RSVD9,
+	S2MPU02_REG_RSVD10,
+	S2MPU02_REG_B1CTRL1,
+	S2MPU02_REG_B1CTRL2,
+	S2MPU02_REG_B2CTRL1,
+	S2MPU02_REG_B2CTRL2,
+	S2MPU02_REG_B3CTRL1,
+	S2MPU02_REG_B3CTRL2,
+	S2MPU02_REG_B4CTRL1,
+	S2MPU02_REG_B4CTRL2,
+	S2MPU02_REG_B5CTRL1,
+	S2MPU02_REG_B5CTRL2,
+	S2MPU02_REG_B5CTRL3,
+	S2MPU02_REG_B5CTRL4,
+	S2MPU02_REG_B5CTRL5,
+	S2MPU02_REG_B6CTRL1,
+	S2MPU02_REG_B6CTRL2,
+	S2MPU02_REG_B7CTRL1,
+	S2MPU02_REG_B7CTRL2,
+	S2MPU02_REG_RAMP1,
+	S2MPU02_REG_RAMP2,
+	S2MPU02_REG_L1CTRL,
+	S2MPU02_REG_L2CTRL1,
+	S2MPU02_REG_L2CTRL2,
+	S2MPU02_REG_L2CTRL3,
+	S2MPU02_REG_L2CTRL4,
+	S2MPU02_REG_L3CTRL,
+	S2MPU02_REG_L4CTRL,
+	S2MPU02_REG_L5CTRL,
+	S2MPU02_REG_L6CTRL,
+	S2MPU02_REG_L7CTRL,
+	S2MPU02_REG_L8CTRL,
+	S2MPU02_REG_L9CTRL,
+	S2MPU02_REG_L10CTRL,
+	S2MPU02_REG_L11CTRL,
+	S2MPU02_REG_L12CTRL,
+	S2MPU02_REG_L13CTRL,
+	S2MPU02_REG_L14CTRL,
+	S2MPU02_REG_L15CTRL,
+	S2MPU02_REG_L16CTRL,
+	S2MPU02_REG_L17CTRL,
+	S2MPU02_REG_L18CTRL,
+	S2MPU02_REG_L19CTRL,
+	S2MPU02_REG_L20CTRL,
+	S2MPU02_REG_L21CTRL,
+	S2MPU02_REG_L22CTRL,
+	S2MPU02_REG_L23CTRL,
+	S2MPU02_REG_L24CTRL,
+	S2MPU02_REG_L25CTRL,
+	S2MPU02_REG_L26CTRL,
+	S2MPU02_REG_L27CTRL,
+	S2MPU02_REG_L28CTRL,
+	S2MPU02_REG_LDODSCH1,
+	S2MPU02_REG_LDODSCH2,
+	S2MPU02_REG_LDODSCH3,
+	S2MPU02_REG_LDODSCH4,
+	S2MPU02_REG_SELMIF,
+	S2MPU02_REG_RSVD11,
+	S2MPU02_REG_RSVD12,
+	S2MPU02_REG_RSVD13,
+	S2MPU02_REG_DVSSEL,
+	S2MPU02_REG_DVSPTR,
+	S2MPU02_REG_DVSDATA,
+};
+
+/* S2MPU02 regulator ids */
+enum S2MPU02_regulators {
+	S2MPU02_LDO1,
+	S2MPU02_LDO2,
+	S2MPU02_LDO3,
+	S2MPU02_LDO4,
+	S2MPU02_LDO5,
+	S2MPU02_LDO6,
+	S2MPU02_LDO7,
+	S2MPU02_LDO8,
+	S2MPU02_LDO9,
+	S2MPU02_LDO10,
+	S2MPU02_LDO11,
+	S2MPU02_LDO12,
+	S2MPU02_LDO13,
+	S2MPU02_LDO14,
+	S2MPU02_LDO15,
+	S2MPU02_LDO16,
+	S2MPU02_LDO17,
+	S2MPU02_LDO18,
+	S2MPU02_LDO19,
+	S2MPU02_LDO20,
+	S2MPU02_LDO21,
+	S2MPU02_LDO22,
+	S2MPU02_LDO23,
+	S2MPU02_LDO24,
+	S2MPU02_LDO25,
+	S2MPU02_LDO26,
+	S2MPU02_LDO27,
+	S2MPU02_LDO28,
+	S2MPU02_BUCK1,
+	S2MPU02_BUCK2,
+	S2MPU02_BUCK3,
+	S2MPU02_BUCK4,
+	S2MPU02_BUCK5,
+	S2MPU02_BUCK6,
+	S2MPU02_BUCK7,
+
+	S2MPU02_REGULATOR_MAX,
+};
+
+/* Regulator constraints for BUCKx */
+#define S2MPU02_BUCK1234_MIN_600MV	600000
+#define S2MPU02_BUCK5_MIN_1081_25MV	1081250
+#define S2MPU02_BUCK6_MIN_1700MV	1700000
+#define S2MPU02_BUCK7_MIN_900MV		900000
+
+#define S2MPU02_BUCK1234_STEP_6_25MV	6250
+#define S2MPU02_BUCK5_STEP_6_25MV	6250
+#define S2MPU02_BUCK6_STEP_2_50MV	2500
+#define S2MPU02_BUCK7_STEP_6_25MV	6250
+
+#define S2MPU02_BUCK1234_START_SEL	0x00
+#define S2MPU02_BUCK5_START_SEL		0x4D
+#define S2MPU02_BUCK6_START_SEL		0x28
+#define S2MPU02_BUCK7_START_SEL		0x30
+
+#define S2MPU02_BUCK_RAMP_DELAY		12500
+
+/* Regulator constraints for different types of LDOx */
+#define S2MPU02_LDO_MIN_900MV		900000
+#define S2MPU02_LDO_MIN_1050MV		1050000
+#define S2MPU02_LDO_MIN_1600MV		1600000
+#define S2MPU02_LDO_STEP_12_5MV		12500
+#define S2MPU02_LDO_STEP_25MV		25000
+#define S2MPU02_LDO_STEP_50MV		50000
+
+#define S2MPU02_LDO_GROUP1_START_SEL	0x8
+#define S2MPU02_LDO_GROUP2_START_SEL	0xA
+#define S2MPU02_LDO_GROUP3_START_SEL	0x10
+
+#define S2MPU02_LDO_VSEL_MASK		0x3F
+#define S2MPU02_BUCK_VSEL_MASK		0xFF
+#define S2MPU02_ENABLE_MASK		(0x03 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_ENABLE_SHIFT		6
+
+/* On/Off controlled by PWREN */
+#define S2MPU02_ENABLE_SUSPEND		(0x01 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_DISABLE_SUSPEND		(0x11 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_LDO_N_VOLTAGES		(S2MPU02_LDO_VSEL_MASK + 1)
+#define S2MPU02_BUCK_N_VOLTAGES		(S2MPU02_BUCK_VSEL_MASK + 1)
+
+/* RAMP delay for BUCK1234*/
+#define S2MPU02_BUCK1_RAMP_SHIFT	6
+#define S2MPU02_BUCK2_RAMP_SHIFT	4
+#define S2MPU02_BUCK3_RAMP_SHIFT	2
+#define S2MPU02_BUCK4_RAMP_SHIFT	0
+#define S2MPU02_BUCK1234_RAMP_MASK	0x3
+
+#endif /*  __LINUX_MFD_S2MPU02_H */
-- 
1.8.0

Re: [PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device

[Lee Jones]

On Tue, 17 Jun 2014, Chanwoo Choi wrote:

> This patch add S2MPU02 regulator device to existing S2MPS11 device driver
> because of little difference between S2MPS1x and S2MPU02. The S2MPU02
> regulator device includes LDO[1-28] and BUCK[1-7].
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> [Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee]
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Acked-by: Mark Brown <broonie@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/mfd/sec-core.c              |  25 +++
>  drivers/regulator/s2mps11.c         | 321 +++++++++++++++++++++++++++++++++---
>  include/linux/mfd/samsung/s2mpu02.h | 201 ++++++++++++++++++++++
>  3 files changed, 526 insertions(+), 21 deletions(-)
>  create mode 100644 include/linux/mfd/samsung/s2mpu02.h

Applied, thanks.

> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 15ba847..2621328 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -28,6 +28,7 @@
>  #include <linux/mfd/samsung/s2mpa01.h>
>  #include <linux/mfd/samsung/s2mps11.h>
>  #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mpu02.h>
>  #include <linux/mfd/samsung/s5m8763.h>
>  #include <linux/mfd/samsung/s5m8767.h>
>  #include <linux/regmap.h>
> @@ -144,6 +145,18 @@ static bool s2mps11_volatile(struct device *dev, unsigned int reg)
>  	}
>  }
>  
> +static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case S2MPU02_REG_INT1M:
> +	case S2MPU02_REG_INT2M:
> +	case S2MPU02_REG_INT3M:
> +		return false;
> +	default:
> +		return true;
> +	}
> +}
> +
>  static bool s5m8763_volatile(struct device *dev, unsigned int reg)
>  {
>  	switch (reg) {
> @@ -189,6 +202,15 @@ static const struct regmap_config s2mps14_regmap_config = {
>  	.cache_type = REGCACHE_FLAT,
>  };
>  
> +static const struct regmap_config s2mpu02_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = S2MPU02_REG_DVSDATA,
> +	.volatile_reg = s2mpu02_volatile,
> +	.cache_type = REGCACHE_FLAT,
> +};
> +
>  static const struct regmap_config s5m8763_regmap_config = {
>  	.reg_bits = 8,
>  	.val_bits = 8,
> @@ -310,6 +332,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
>  	case S5M8767X:
>  		regmap = &s5m8767_regmap_config;
>  		break;
> +	case S2MPU02:
> +		regmap = &s2mpu02_regmap_config;
> +		break;
>  	default:
>  		regmap = &sec_regmap_config;
>  		break;
> diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
> index 02e2fb2..2daacc6 100644
> --- a/drivers/regulator/s2mps11.c
> +++ b/drivers/regulator/s2mps11.c
> @@ -31,6 +31,7 @@
>  #include <linux/mfd/samsung/core.h>
>  #include <linux/mfd/samsung/s2mps11.h>
>  #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mpu02.h>
>  
>  struct s2mps11_info {
>  	unsigned int rdev_num;
> @@ -40,11 +41,15 @@ struct s2mps11_info {
>  	int ramp_delay16;
>  	int ramp_delay7810;
>  	int ramp_delay9;
> +
> +	enum sec_device_type dev_type;
> +
>  	/*
> -	 * One bit for each S2MPS14 regulator whether the suspend mode
> +	 * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
>  	 * was enabled.
>  	 */
> -	unsigned int s2mps14_suspend_state:30;
> +	unsigned long long s2mps14_suspend_state:35;
> +
>  	/* Array of size rdev_num with GPIO-s for external sleep control */
>  	int *ext_control_gpio;
>  };
> @@ -415,12 +420,24 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
>  	struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
>  	unsigned int val;
>  
> -	if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
> -		val = S2MPS14_ENABLE_SUSPEND;
> -	else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
> -		val = S2MPS14_ENABLE_EXT_CONTROL;
> -	else
> -		val = rdev->desc->enable_mask;
> +	switch (s2mps11->dev_type) {
> +	case S2MPS14X:
> +		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
> +			val = S2MPS14_ENABLE_SUSPEND;
> +		else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
> +			val = S2MPS14_ENABLE_EXT_CONTROL;
> +		else
> +			val = rdev->desc->enable_mask;
> +		break;
> +	case S2MPU02:
> +		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
> +			val = S2MPU02_ENABLE_SUSPEND;
> +		else
> +			val = rdev->desc->enable_mask;
> +		break;
> +	default:
> +		return -EINVAL;
> +	};
>  
>  	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
>  			rdev->desc->enable_mask, val);
> @@ -429,12 +446,38 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
>  static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
>  {
>  	int ret;
> -	unsigned int val;
> +	unsigned int val, state;
>  	struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
> +	int rdev_id = rdev_get_id(rdev);
>  
> -	/* LDO3 should be always on and does not support suspend mode */
> -	if (rdev_get_id(rdev) == S2MPS14_LDO3)
> -		return 0;
> +	/* Below LDO should be always on or does not support suspend mode. */
> +	switch (s2mps11->dev_type) {
> +	case S2MPS14X:
> +		switch (rdev_id) {
> +		case S2MPS14_LDO3:
> +			return 0;
> +		default:
> +			state = S2MPS14_ENABLE_SUSPEND;
> +			break;
> +		};
> +		break;
> +	case S2MPU02:
> +		switch (rdev_id) {
> +		case S2MPU02_LDO13:
> +		case S2MPU02_LDO14:
> +		case S2MPU02_LDO15:
> +		case S2MPU02_LDO17:
> +		case S2MPU02_BUCK7:
> +			state = S2MPU02_DISABLE_SUSPEND;
> +			break;
> +		default:
> +			state = S2MPU02_ENABLE_SUSPEND;
> +			break;
> +		};
> +		break;
> +	default:
> +		return -EINVAL;
> +	};
>  
>  	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
>  	if (ret < 0)
> @@ -452,7 +495,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
>  		return 0;
>  
>  	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
> -			rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND);
> +			rdev->desc->enable_mask, state);
>  }
>  
>  static struct regulator_ops s2mps14_reg_ops = {
> @@ -605,8 +648,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
>  }
>  
>  static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
> -		struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
> -		enum sec_device_type dev_type)
> +		struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
>  {
>  	struct device_node *reg_np;
>  
> @@ -617,7 +659,7 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
>  	}
>  
>  	of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
> -	if (dev_type == S2MPS14X)
> +	if (s2mps11->dev_type == S2MPS14X)
>  		s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
>  
>  	of_node_put(reg_np);
> @@ -625,6 +667,238 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
>  	return 0;
>  }
>  
> +static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
> +{
> +	unsigned int ramp_val, ramp_shift, ramp_reg;
> +
> +	switch (rdev_get_id(rdev)) {
> +	case S2MPU02_BUCK1:
> +		ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
> +		break;
> +	case S2MPU02_BUCK2:
> +		ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
> +		break;
> +	case S2MPU02_BUCK3:
> +		ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
> +		break;
> +	case S2MPU02_BUCK4:
> +		ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
> +		break;
> +	default:
> +		return 0;
> +	}
> +	ramp_reg = S2MPU02_REG_RAMP1;
> +	ramp_val = get_ramp_delay(ramp_delay);
> +
> +	return regmap_update_bits(rdev->regmap, ramp_reg,
> +				  S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
> +				  ramp_val << ramp_shift);
> +}
> +
> +static struct regulator_ops s2mpu02_ldo_ops = {
> +	.list_voltage		= regulator_list_voltage_linear,
> +	.map_voltage		= regulator_map_voltage_linear,
> +	.is_enabled		= regulator_is_enabled_regmap,
> +	.enable			= s2mps14_regulator_enable,
> +	.disable		= regulator_disable_regmap,
> +	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
> +	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
> +	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
> +	.set_suspend_disable	= s2mps14_regulator_set_suspend_disable,
> +};
> +
> +static struct regulator_ops s2mpu02_buck_ops = {
> +	.list_voltage		= regulator_list_voltage_linear,
> +	.map_voltage		= regulator_map_voltage_linear,
> +	.is_enabled		= regulator_is_enabled_regmap,
> +	.enable			= s2mps14_regulator_enable,
> +	.disable		= regulator_disable_regmap,
> +	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
> +	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
> +	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
> +	.set_suspend_disable	= s2mps14_regulator_set_suspend_disable,
> +	.set_ramp_delay		= s2mpu02_set_ramp_delay,
> +};
> +
> +#define regulator_desc_s2mpu02_ldo1(num) {		\
> +	.name		= "LDO"#num,			\
> +	.id		= S2MPU02_LDO##num,		\
> +	.ops		= &s2mpu02_ldo_ops,		\
> +	.type		= REGULATOR_VOLTAGE,		\
> +	.owner		= THIS_MODULE,			\
> +	.min_uV		= S2MPU02_LDO_MIN_900MV,	\
> +	.uV_step	= S2MPU02_LDO_STEP_12_5MV,	\
> +	.linear_min_sel	= S2MPU02_LDO_GROUP1_START_SEL,	\
> +	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
> +	.vsel_reg	= S2MPU02_REG_L1CTRL,		\
> +	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
> +	.enable_reg	= S2MPU02_REG_L1CTRL,		\
> +	.enable_mask	= S2MPU02_ENABLE_MASK		\
> +}
> +#define regulator_desc_s2mpu02_ldo2(num) {		\
> +	.name		= "LDO"#num,			\
> +	.id		= S2MPU02_LDO##num,		\
> +	.ops		= &s2mpu02_ldo_ops,		\
> +	.type		= REGULATOR_VOLTAGE,		\
> +	.owner		= THIS_MODULE,			\
> +	.min_uV		= S2MPU02_LDO_MIN_1050MV,	\
> +	.uV_step	= S2MPU02_LDO_STEP_25MV,	\
> +	.linear_min_sel	= S2MPU02_LDO_GROUP2_START_SEL,	\
> +	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
> +	.vsel_reg	= S2MPU02_REG_L2CTRL1,		\
> +	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
> +	.enable_reg	= S2MPU02_REG_L2CTRL1,		\
> +	.enable_mask	= S2MPU02_ENABLE_MASK		\
> +}
> +#define regulator_desc_s2mpu02_ldo3(num) {		\
> +	.name		= "LDO"#num,			\
> +	.id		= S2MPU02_LDO##num,		\
> +	.ops		= &s2mpu02_ldo_ops,		\
> +	.type		= REGULATOR_VOLTAGE,		\
> +	.owner		= THIS_MODULE,			\
> +	.min_uV		= S2MPU02_LDO_MIN_900MV,	\
> +	.uV_step	= S2MPU02_LDO_STEP_12_5MV,	\
> +	.linear_min_sel	= S2MPU02_LDO_GROUP1_START_SEL,	\
> +	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
> +	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
> +	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.enable_mask	= S2MPU02_ENABLE_MASK		\
> +}
> +#define regulator_desc_s2mpu02_ldo4(num) {		\
> +	.name		= "LDO"#num,			\
> +	.id		= S2MPU02_LDO##num,		\
> +	.ops		= &s2mpu02_ldo_ops,		\
> +	.type		= REGULATOR_VOLTAGE,		\
> +	.owner		= THIS_MODULE,			\
> +	.min_uV		= S2MPU02_LDO_MIN_1050MV,	\
> +	.uV_step	= S2MPU02_LDO_STEP_25MV,	\
> +	.linear_min_sel	= S2MPU02_LDO_GROUP2_START_SEL,	\
> +	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
> +	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
> +	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.enable_mask	= S2MPU02_ENABLE_MASK		\
> +}
> +#define regulator_desc_s2mpu02_ldo5(num) {		\
> +	.name		= "LDO"#num,			\
> +	.id		= S2MPU02_LDO##num,		\
> +	.ops		= &s2mpu02_ldo_ops,		\
> +	.type		= REGULATOR_VOLTAGE,		\
> +	.owner		= THIS_MODULE,			\
> +	.min_uV		= S2MPU02_LDO_MIN_1600MV,	\
> +	.uV_step	= S2MPU02_LDO_STEP_50MV,	\
> +	.linear_min_sel	= S2MPU02_LDO_GROUP3_START_SEL,	\
> +	.n_voltages	= S2MPU02_LDO_N_VOLTAGES,	\
> +	.vsel_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.vsel_mask	= S2MPU02_LDO_VSEL_MASK,	\
> +	.enable_reg	= S2MPU02_REG_L3CTRL + num - 3,	\
> +	.enable_mask	= S2MPU02_ENABLE_MASK		\
> +}
> +
> +#define regulator_desc_s2mpu02_buck1234(num) {			\
> +	.name		= "BUCK"#num,				\
> +	.id		= S2MPU02_BUCK##num,			\
> +	.ops		= &s2mpu02_buck_ops,			\
> +	.type		= REGULATOR_VOLTAGE,			\
> +	.owner		= THIS_MODULE,				\
> +	.min_uV		= S2MPU02_BUCK1234_MIN_600MV,		\
> +	.uV_step	= S2MPU02_BUCK1234_STEP_6_25MV,		\
> +	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
> +	.linear_min_sel = S2MPU02_BUCK1234_START_SEL,		\
> +	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
> +	.vsel_reg	= S2MPU02_REG_B1CTRL2 + (num - 1) * 2,	\
> +	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
> +	.enable_reg	= S2MPU02_REG_B1CTRL1 + (num - 1) * 2,	\
> +	.enable_mask	= S2MPU02_ENABLE_MASK			\
> +}
> +#define regulator_desc_s2mpu02_buck5(num) {			\
> +	.name		= "BUCK"#num,				\
> +	.id		= S2MPU02_BUCK##num,			\
> +	.ops		= &s2mpu02_ldo_ops,			\
> +	.type		= REGULATOR_VOLTAGE,			\
> +	.owner		= THIS_MODULE,				\
> +	.min_uV		= S2MPU02_BUCK5_MIN_1081_25MV,		\
> +	.uV_step	= S2MPU02_BUCK5_STEP_6_25MV,		\
> +	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
> +	.linear_min_sel = S2MPU02_BUCK5_START_SEL,		\
> +	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
> +	.vsel_reg	= S2MPU02_REG_B5CTRL2,			\
> +	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
> +	.enable_reg	= S2MPU02_REG_B5CTRL1,			\
> +	.enable_mask	= S2MPU02_ENABLE_MASK			\
> +}
> +#define regulator_desc_s2mpu02_buck6(num) {			\
> +	.name		= "BUCK"#num,				\
> +	.id		= S2MPU02_BUCK##num,			\
> +	.ops		= &s2mpu02_ldo_ops,			\
> +	.type		= REGULATOR_VOLTAGE,			\
> +	.owner		= THIS_MODULE,				\
> +	.min_uV		= S2MPU02_BUCK6_MIN_1700MV,		\
> +	.uV_step	= S2MPU02_BUCK6_STEP_2_50MV,		\
> +	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
> +	.linear_min_sel = S2MPU02_BUCK6_START_SEL,		\
> +	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
> +	.vsel_reg	= S2MPU02_REG_B6CTRL2,			\
> +	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
> +	.enable_reg	= S2MPU02_REG_B6CTRL1,			\
> +	.enable_mask	= S2MPU02_ENABLE_MASK			\
> +}
> +#define regulator_desc_s2mpu02_buck7(num) {			\
> +	.name		= "BUCK"#num,				\
> +	.id		= S2MPU02_BUCK##num,			\
> +	.ops		= &s2mpu02_ldo_ops,			\
> +	.type		= REGULATOR_VOLTAGE,			\
> +	.owner		= THIS_MODULE,				\
> +	.min_uV		= S2MPU02_BUCK7_MIN_900MV,		\
> +	.uV_step	= S2MPU02_BUCK7_STEP_6_25MV,		\
> +	.n_voltages	= S2MPU02_BUCK_N_VOLTAGES,		\
> +	.linear_min_sel = S2MPU02_BUCK7_START_SEL,		\
> +	.ramp_delay	= S2MPU02_BUCK_RAMP_DELAY,		\
> +	.vsel_reg	= S2MPU02_REG_B7CTRL2,			\
> +	.vsel_mask	= S2MPU02_BUCK_VSEL_MASK,		\
> +	.enable_reg	= S2MPU02_REG_B7CTRL1,			\
> +	.enable_mask	= S2MPU02_ENABLE_MASK			\
> +}
> +
> +static const struct regulator_desc s2mpu02_regulators[] = {
> +	regulator_desc_s2mpu02_ldo1(1),
> +	regulator_desc_s2mpu02_ldo2(2),
> +	regulator_desc_s2mpu02_ldo4(3),
> +	regulator_desc_s2mpu02_ldo5(4),
> +	regulator_desc_s2mpu02_ldo4(5),
> +	regulator_desc_s2mpu02_ldo3(6),
> +	regulator_desc_s2mpu02_ldo3(7),
> +	regulator_desc_s2mpu02_ldo4(8),
> +	regulator_desc_s2mpu02_ldo5(9),
> +	regulator_desc_s2mpu02_ldo3(10),
> +	regulator_desc_s2mpu02_ldo4(11),
> +	regulator_desc_s2mpu02_ldo5(12),
> +	regulator_desc_s2mpu02_ldo5(13),
> +	regulator_desc_s2mpu02_ldo5(14),
> +	regulator_desc_s2mpu02_ldo5(15),
> +	regulator_desc_s2mpu02_ldo5(16),
> +	regulator_desc_s2mpu02_ldo4(17),
> +	regulator_desc_s2mpu02_ldo5(18),
> +	regulator_desc_s2mpu02_ldo3(19),
> +	regulator_desc_s2mpu02_ldo4(20),
> +	regulator_desc_s2mpu02_ldo5(21),
> +	regulator_desc_s2mpu02_ldo5(22),
> +	regulator_desc_s2mpu02_ldo5(23),
> +	regulator_desc_s2mpu02_ldo4(24),
> +	regulator_desc_s2mpu02_ldo5(25),
> +	regulator_desc_s2mpu02_ldo4(26),
> +	regulator_desc_s2mpu02_ldo5(27),
> +	regulator_desc_s2mpu02_ldo5(28),
> +	regulator_desc_s2mpu02_buck1234(1),
> +	regulator_desc_s2mpu02_buck1234(2),
> +	regulator_desc_s2mpu02_buck1234(3),
> +	regulator_desc_s2mpu02_buck1234(4),
> +	regulator_desc_s2mpu02_buck5(5),
> +	regulator_desc_s2mpu02_buck6(6),
> +	regulator_desc_s2mpu02_buck7(7),
> +};
> +
>  static int s2mps11_pmic_probe(struct platform_device *pdev)
>  {
>  	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> @@ -634,15 +908,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
>  	struct s2mps11_info *s2mps11;
>  	int i, ret = 0;
>  	const struct regulator_desc *regulators;
> -	enum sec_device_type dev_type;
>  
>  	s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
>  				GFP_KERNEL);
>  	if (!s2mps11)
>  		return -ENOMEM;
>  
> -	dev_type = platform_get_device_id(pdev)->driver_data;
> -	switch (dev_type) {
> +	s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
> +	switch (s2mps11->dev_type) {
>  	case S2MPS11X:
>  		s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
>  		regulators = s2mps11_regulators;
> @@ -651,8 +924,13 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
>  		s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
>  		regulators = s2mps14_regulators;
>  		break;
> +	case S2MPU02:
> +		s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
> +		regulators = s2mpu02_regulators;
> +		break;
>  	default:
> -		dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type);
> +		dev_err(&pdev->dev, "Invalid device type: %u\n",
> +				    s2mps11->dev_type);
>  		return -EINVAL;
>  	};
>  
> @@ -686,7 +964,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
>  	for (i = 0; i < s2mps11->rdev_num; i++)
>  		rdata[i].name = regulators[i].name;
>  
> -	ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, dev_type);
> +	ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
>  	if (ret)
>  		goto out;
>  
> @@ -739,6 +1017,7 @@ out:
>  static const struct platform_device_id s2mps11_pmic_id[] = {
>  	{ "s2mps11-pmic", S2MPS11X},
>  	{ "s2mps14-pmic", S2MPS14X},
> +	{ "s2mpu02-pmic", S2MPU02},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
> diff --git a/include/linux/mfd/samsung/s2mpu02.h b/include/linux/mfd/samsung/s2mpu02.h
> new file mode 100644
> index 0000000..47ae9bc
> --- /dev/null
> +++ b/include/linux/mfd/samsung/s2mpu02.h
> @@ -0,0 +1,201 @@
> +/*
> + * s2mpu02.h
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + *              http://www.samsung.com
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __LINUX_MFD_S2MPU02_H
> +#define __LINUX_MFD_S2MPU02_H
> +
> +/* S2MPU02 registers */
> +enum S2MPU02_reg {
> +	S2MPU02_REG_ID,
> +	S2MPU02_REG_INT1,
> +	S2MPU02_REG_INT2,
> +	S2MPU02_REG_INT3,
> +	S2MPU02_REG_INT1M,
> +	S2MPU02_REG_INT2M,
> +	S2MPU02_REG_INT3M,
> +	S2MPU02_REG_ST1,
> +	S2MPU02_REG_ST2,
> +	S2MPU02_REG_PWRONSRC,
> +	S2MPU02_REG_OFFSRC,
> +	S2MPU02_REG_BU_CHG,
> +	S2MPU02_REG_RTCCTRL,
> +	S2MPU02_REG_PMCTRL1,
> +	S2MPU02_REG_RSVD1,
> +	S2MPU02_REG_RSVD2,
> +	S2MPU02_REG_RSVD3,
> +	S2MPU02_REG_RSVD4,
> +	S2MPU02_REG_RSVD5,
> +	S2MPU02_REG_RSVD6,
> +	S2MPU02_REG_RSVD7,
> +	S2MPU02_REG_WRSTEN,
> +	S2MPU02_REG_RSVD8,
> +	S2MPU02_REG_RSVD9,
> +	S2MPU02_REG_RSVD10,
> +	S2MPU02_REG_B1CTRL1,
> +	S2MPU02_REG_B1CTRL2,
> +	S2MPU02_REG_B2CTRL1,
> +	S2MPU02_REG_B2CTRL2,
> +	S2MPU02_REG_B3CTRL1,
> +	S2MPU02_REG_B3CTRL2,
> +	S2MPU02_REG_B4CTRL1,
> +	S2MPU02_REG_B4CTRL2,
> +	S2MPU02_REG_B5CTRL1,
> +	S2MPU02_REG_B5CTRL2,
> +	S2MPU02_REG_B5CTRL3,
> +	S2MPU02_REG_B5CTRL4,
> +	S2MPU02_REG_B5CTRL5,
> +	S2MPU02_REG_B6CTRL1,
> +	S2MPU02_REG_B6CTRL2,
> +	S2MPU02_REG_B7CTRL1,
> +	S2MPU02_REG_B7CTRL2,
> +	S2MPU02_REG_RAMP1,
> +	S2MPU02_REG_RAMP2,
> +	S2MPU02_REG_L1CTRL,
> +	S2MPU02_REG_L2CTRL1,
> +	S2MPU02_REG_L2CTRL2,
> +	S2MPU02_REG_L2CTRL3,
> +	S2MPU02_REG_L2CTRL4,
> +	S2MPU02_REG_L3CTRL,
> +	S2MPU02_REG_L4CTRL,
> +	S2MPU02_REG_L5CTRL,
> +	S2MPU02_REG_L6CTRL,
> +	S2MPU02_REG_L7CTRL,
> +	S2MPU02_REG_L8CTRL,
> +	S2MPU02_REG_L9CTRL,
> +	S2MPU02_REG_L10CTRL,
> +	S2MPU02_REG_L11CTRL,
> +	S2MPU02_REG_L12CTRL,
> +	S2MPU02_REG_L13CTRL,
> +	S2MPU02_REG_L14CTRL,
> +	S2MPU02_REG_L15CTRL,
> +	S2MPU02_REG_L16CTRL,
> +	S2MPU02_REG_L17CTRL,
> +	S2MPU02_REG_L18CTRL,
> +	S2MPU02_REG_L19CTRL,
> +	S2MPU02_REG_L20CTRL,
> +	S2MPU02_REG_L21CTRL,
> +	S2MPU02_REG_L22CTRL,
> +	S2MPU02_REG_L23CTRL,
> +	S2MPU02_REG_L24CTRL,
> +	S2MPU02_REG_L25CTRL,
> +	S2MPU02_REG_L26CTRL,
> +	S2MPU02_REG_L27CTRL,
> +	S2MPU02_REG_L28CTRL,
> +	S2MPU02_REG_LDODSCH1,
> +	S2MPU02_REG_LDODSCH2,
> +	S2MPU02_REG_LDODSCH3,
> +	S2MPU02_REG_LDODSCH4,
> +	S2MPU02_REG_SELMIF,
> +	S2MPU02_REG_RSVD11,
> +	S2MPU02_REG_RSVD12,
> +	S2MPU02_REG_RSVD13,
> +	S2MPU02_REG_DVSSEL,
> +	S2MPU02_REG_DVSPTR,
> +	S2MPU02_REG_DVSDATA,
> +};
> +
> +/* S2MPU02 regulator ids */
> +enum S2MPU02_regulators {
> +	S2MPU02_LDO1,
> +	S2MPU02_LDO2,
> +	S2MPU02_LDO3,
> +	S2MPU02_LDO4,
> +	S2MPU02_LDO5,
> +	S2MPU02_LDO6,
> +	S2MPU02_LDO7,
> +	S2MPU02_LDO8,
> +	S2MPU02_LDO9,
> +	S2MPU02_LDO10,
> +	S2MPU02_LDO11,
> +	S2MPU02_LDO12,
> +	S2MPU02_LDO13,
> +	S2MPU02_LDO14,
> +	S2MPU02_LDO15,
> +	S2MPU02_LDO16,
> +	S2MPU02_LDO17,
> +	S2MPU02_LDO18,
> +	S2MPU02_LDO19,
> +	S2MPU02_LDO20,
> +	S2MPU02_LDO21,
> +	S2MPU02_LDO22,
> +	S2MPU02_LDO23,
> +	S2MPU02_LDO24,
> +	S2MPU02_LDO25,
> +	S2MPU02_LDO26,
> +	S2MPU02_LDO27,
> +	S2MPU02_LDO28,
> +	S2MPU02_BUCK1,
> +	S2MPU02_BUCK2,
> +	S2MPU02_BUCK3,
> +	S2MPU02_BUCK4,
> +	S2MPU02_BUCK5,
> +	S2MPU02_BUCK6,
> +	S2MPU02_BUCK7,
> +
> +	S2MPU02_REGULATOR_MAX,
> +};
> +
> +/* Regulator constraints for BUCKx */
> +#define S2MPU02_BUCK1234_MIN_600MV	600000
> +#define S2MPU02_BUCK5_MIN_1081_25MV	1081250
> +#define S2MPU02_BUCK6_MIN_1700MV	1700000
> +#define S2MPU02_BUCK7_MIN_900MV		900000
> +
> +#define S2MPU02_BUCK1234_STEP_6_25MV	6250
> +#define S2MPU02_BUCK5_STEP_6_25MV	6250
> +#define S2MPU02_BUCK6_STEP_2_50MV	2500
> +#define S2MPU02_BUCK7_STEP_6_25MV	6250
> +
> +#define S2MPU02_BUCK1234_START_SEL	0x00
> +#define S2MPU02_BUCK5_START_SEL		0x4D
> +#define S2MPU02_BUCK6_START_SEL		0x28
> +#define S2MPU02_BUCK7_START_SEL		0x30
> +
> +#define S2MPU02_BUCK_RAMP_DELAY		12500
> +
> +/* Regulator constraints for different types of LDOx */
> +#define S2MPU02_LDO_MIN_900MV		900000
> +#define S2MPU02_LDO_MIN_1050MV		1050000
> +#define S2MPU02_LDO_MIN_1600MV		1600000
> +#define S2MPU02_LDO_STEP_12_5MV		12500
> +#define S2MPU02_LDO_STEP_25MV		25000
> +#define S2MPU02_LDO_STEP_50MV		50000
> +
> +#define S2MPU02_LDO_GROUP1_START_SEL	0x8
> +#define S2MPU02_LDO_GROUP2_START_SEL	0xA
> +#define S2MPU02_LDO_GROUP3_START_SEL	0x10
> +
> +#define S2MPU02_LDO_VSEL_MASK		0x3F
> +#define S2MPU02_BUCK_VSEL_MASK		0xFF
> +#define S2MPU02_ENABLE_MASK		(0x03 << S2MPU02_ENABLE_SHIFT)
> +#define S2MPU02_ENABLE_SHIFT		6
> +
> +/* On/Off controlled by PWREN */
> +#define S2MPU02_ENABLE_SUSPEND		(0x01 << S2MPU02_ENABLE_SHIFT)
> +#define S2MPU02_DISABLE_SUSPEND		(0x11 << S2MPU02_ENABLE_SHIFT)
> +#define S2MPU02_LDO_N_VOLTAGES		(S2MPU02_LDO_VSEL_MASK + 1)
> +#define S2MPU02_BUCK_N_VOLTAGES		(S2MPU02_BUCK_VSEL_MASK + 1)
> +
> +/* RAMP delay for BUCK1234*/
> +#define S2MPU02_BUCK1_RAMP_SHIFT	6
> +#define S2MPU02_BUCK2_RAMP_SHIFT	4
> +#define S2MPU02_BUCK3_RAMP_SHIFT	2
> +#define S2MPU02_BUCK4_RAMP_SHIFT	0
> +#define S2MPU02_BUCK1234_RAMP_MASK	0x3
> +
> +#endif /*  __LINUX_MFD_S2MPU02_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCHv6 3/3] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC

[Chanwoo Choi]

This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index d81ba30..f7c9180 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
 
-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+              or "samsung,s2mpu02-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
 		  - valid values for n are:
 			- S2MPS11: 1 to 38
 			- S2MPS14: 1 to 25
+			- S2MPU02: 1 to 28
 		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are:
 			- S2MPS11: 1 to 10
 			- S2MPS14: 1 to 5
+			- S2MPU02: 1 to 7
 		  - Example: BUCK1, BUCK2, BUCK9
 
 Example:
-- 
1.8.0

Re: [PATCHv6 3/3] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC

[Lee Jones]

On Tue, 17 Jun 2014, Chanwoo Choi wrote:

> This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
> difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

Nothing controversial here me thinks.

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index d81ba30..f7c9180 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -1,5 +1,5 @@
>  
> -* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
> +* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
>  
>  The Samsung S2MPS11 is a multi-function device which includes voltage and
>  current regulators, RTC, charger controller and other sub-blocks. It is
> @@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
>  addressed by the host system using different I2C slave addresses.
>  
>  Required properties:
> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
> +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
> +              or "samsung,s2mpu02-pmic".
>  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
>  
>  Optional properties:
> @@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
>  		  - valid values for n are:
>  			- S2MPS11: 1 to 38
>  			- S2MPS14: 1 to 25
> +			- S2MPU02: 1 to 28
>  		  - Example: LDO1, LD02, LDO28
>  	- BUCKn
>  		  - valid values for n are:
>  			- S2MPS11: 1 to 10
>  			- S2MPS14: 1 to 5
> +			- S2MPU02: 1 to 7
>  		  - Example: BUCK1, BUCK2, BUCK9
>  
>  Example:

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[GIT PULL] Mark - Immutable branch between MFD and Regulator

[Lee Jones]

Mark,

The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:

  Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-regulator-v3.17

for you to fetch changes up to d1f79ff65b2c6a9e2785ac94c2eb6a5229859251:

  dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC (2014-06-18 10:18:45 +0100)

----------------------------------------------------------------
Immutable branch between MFD and Regulator for v3.17

----------------------------------------------------------------
Chanwoo Choi (3):
      mfd: sec-core: Add support for S2MPU02 device
      regulator: s2mps11: Add support S2MPU02 regulator device
      dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC

 Documentation/devicetree/bindings/mfd/s2mps11.txt |   7 +-
 drivers/mfd/sec-core.c                            |  71 ++++-
 drivers/mfd/sec-irq.c                             | 110 ++++++--
 drivers/regulator/s2mps11.c                       | 321 ++++++++++++++++++++--
 include/linux/mfd/samsung/core.h                  |   1 +
 include/linux/mfd/samsung/irq.h                   |  24 ++
 include/linux/mfd/samsung/s2mpu02.h               | 201 ++++++++++++++
 7 files changed, 682 insertions(+), 53 deletions(-)
 create mode 100644 include/linux/mfd/samsung/s2mpu02.h

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog