* Re: Notebook does not resume from hibernation
[not found] ` <556E041D.5060007@gmx.net>
@ 2015-06-02 23:57 ` Albino Biasutti Neto
2015-07-06 12:22 ` Pavel Machek
0 siblings, 1 reply; 7+ messages in thread
From: Albino Biasutti Neto @ 2015-06-02 23:57 UTC (permalink / raw)
To: Markus Weyermann, Linux Kernel
Forwarding email for linux-kernel.
2015-06-02 16:29 GMT-03:00 Markus Weyermann <markus.weyermann@gmx.net>:
> Dear Albino
>
> I dont know what you mean by "more Infos".
>
> dmesg:
>
> [ 0.367432] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
> [ 0.367512] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
> [ 0.367524] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
> [ 0.367531] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff
> 64bit pref]
> [ 0.367536] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
> [ 0.367634] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
> [ 0.367659] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
> [ 0.367735] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.367765] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.367808] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
> [ 0.367830] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit]
> [ 0.367901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.367977] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
> [ 0.368000] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff]
> [ 0.368096] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.368333] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.368380] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
> [ 0.368398] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
> [ 0.368479] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.368511] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.368552] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
> [ 0.368640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.368674] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.368714] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
> [ 0.368801] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.368835] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.368875] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
> [ 0.368962] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.368996] pci 0000:00:1c.2: System wakeup disabled by ACPI
> [ 0.369047] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
> [ 0.369069] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff]
> [ 0.369166] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.369317] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.369367] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
> [ 0.369542] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
> [ 0.369562] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
> [ 0.369571] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
> [ 0.369580] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
> [ 0.369588] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
> [ 0.369597] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
> [ 0.369605] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff]
> [ 0.369656] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.369720] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
> [ 0.369737] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit]
> [ 0.369759] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
> [ 0.369929] pci 0000:01:00.0: [1814:539b] type 00 class 0x028000
> [ 0.369954] pci 0000:01:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff]
> [ 0.377449] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.377456] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
> [ 0.377555] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
> [ 0.377579] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
> [ 0.377614] pci 0000:02:00.0: reg 0x18: [mem 0xc2404000-0xc2404fff
> 64bit pref]
> [ 0.377637] pci 0000:02:00.0: reg 0x20: [mem 0xc2400000-0xc2403fff
> 64bit pref]
> [ 0.377754] pci 0000:02:00.0: supports D1 D2
> [ 0.377756] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.377806] pci 0000:02:00.0: System wakeup disabled by ACPI
> [ 0.385419] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.385427] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
> [ 0.385452] pci 0000:00:1c.1: bridge window [mem
> 0xc2400000-0xc24fffff 64bit pref]
> [ 0.385630] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
> [ 0.385704] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff]
> [ 0.386236] pci 0000:03:00.0: supports D1 D2
> [ 0.386238] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
> [ 0.393487] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 0.393492] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
> [ 0.393496] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
> [ 0.393502] pci 0000:00:1c.2: bridge window [mem
> 0xc0000000-0xc0ffffff 64bit pref]
> [ 0.394024] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394075] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394123] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394171] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394218] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394267] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394313] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394361] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394460] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.394504] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data =
> 0x62
> [ 0.394600] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.394602] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.394605] vgaarb: loaded
> [ 0.394607] vgaarb: bridge control possible 0000:00:02.0
> [ 0.394837] SCSI subsystem initialized
> [ 0.394879] libata version 3.00 loaded.
> [ 0.394905] ACPI: bus type USB registered
> [ 0.394921] usbcore: registered new interface driver usbfs
> [ 0.394931] usbcore: registered new interface driver hub
> [ 0.394956] usbcore: registered new device driver usb
> [ 0.395144] PCI: Using ACPI for IRQ routing
> [ 0.402676] PCI: pci_cache_line_size set to 64 bytes
> [ 0.402793] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
> [ 0.402795] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
> [ 0.402796] e820: reserve RAM buffer [mem 0xaa0bf000-0xabffffff]
> [ 0.402798] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
> [ 0.402799] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
> [ 0.402912] NetLabel: Initializing
> [ 0.402913] NetLabel: domain hash size = 128
> [ 0.402914] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.402926] NetLabel: unlabeled traffic allowed by default
> [ 0.402993] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.402998] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.405040] Switched to clocksource hpet
> [ 0.410347] AppArmor: AppArmor Filesystem Enabled
> [ 0.410415] pnp: PnP ACPI init
> [ 0.410752] system 00:00: [io 0x0680-0x069f] has been reserved
> [ 0.410755] system 00:00: [io 0x1000-0x100f] has been reserved
> [ 0.410757] system 00:00: [io 0xffff] has been reserved
> [ 0.410759] system 00:00: [io 0xffff] has been reserved
> [ 0.410761] system 00:00: [io 0x0400-0x0453] could not be reserved
> [ 0.410763] system 00:00: [io 0x0458-0x047f] has been reserved
> [ 0.410764] system 00:00: [io 0x0500-0x057f] has been reserved
> [ 0.410766] system 00:00: [io 0x164e-0x164f] has been reserved
> [ 0.410768] system 00:00: [io 0x0454-0x0457] has been reserved
> [ 0.410770] system 00:00: [io 0x0380-0x0387] has been reserved
> [ 0.410773] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.410805] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.410836] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303
> (active)
> [ 0.410872] pnp 00:03: Plug and Play ACPI device, IDs SYN1e60 SYN1e00
> SYN0002 PNP0f13 (active)
> [ 0.411041] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.411044] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.411045] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.411047] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.411049] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.411051] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.411053] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
> [ 0.411055] system 00:04: [mem 0xff000000-0xffffffff] could not be
> reserved
> [ 0.411057] system 00:04: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 0.411059] system 00:04: [mem 0xafa00000-0xafa00fff] has been reserved
> [ 0.411062] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.411244] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
> [ 0.411246] system 00:05: [mem 0x40004000-0x40004fff] has been reserved
> [ 0.411249] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.411266] pnp: PnP ACPI: found 6 devices
> [ 0.417693] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.417699] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
> [ 0.417708] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.417712] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
> [ 0.417720] pci 0000:00:1c.1: bridge window [mem
> 0xc2400000-0xc24fffff 64bit pref]
> [ 0.417726] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 0.417730] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
> [ 0.417735] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
> [ 0.417740] pci 0000:00:1c.2: bridge window [mem
> 0xc0000000-0xc0ffffff 64bit pref]
> [ 0.417747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.417749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.417751] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> window]
> [ 0.417753] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff
> window]
> [ 0.417755] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff
> window]
> [ 0.417756] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff
> window]
> [ 0.417758] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff
> window]
> [ 0.417760] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff
> window]
> [ 0.417761] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff
> window]
> [ 0.417763] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff
> window]
> [ 0.417765] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff
> window]
> [ 0.417766] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff
> window]
> [ 0.417768] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff
> window]
> [ 0.417770] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff
> window]
> [ 0.417772] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff
> window]
> [ 0.417773] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff
> window]
> [ 0.417775] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfeafffff
> window]
> [ 0.417777] pci_bus 0000:01: resource 1 [mem 0xc2500000-0xc25fffff]
> [ 0.417779] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
> [ 0.417781] pci_bus 0000:02: resource 2 [mem 0xc2400000-0xc24fffff
> 64bit pref]
> [ 0.417782] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
> [ 0.417784] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
> [ 0.417786] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff
> 64bit pref]
> [ 0.417816] NET: Registered protocol family 2
> [ 0.417997] TCP established hash table entries: 65536 (order: 7,
> 524288 bytes)
> [ 0.418156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.418275] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.418290] TCP: reno registered
> [ 0.418302] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.418331] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.418389] NET: Registered protocol family 1
> [ 0.418402] pci 0000:00:02.0: Video device with shadowed ROM
> [ 0.449249] PCI: CLS 64 bytes, default 64
> [ 0.449298] Trying to unpack rootfs image as initramfs...
> [ 0.953777] Freeing initrd memory: 29340K (ffff8800346a2000 -
> ffff880036349000)
> [ 0.953787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.953790] software IO TLB [mem 0xa31b7000-0xa71b7000] (64MB) mapped
> at [ffff8800a31b7000-ffff8800a71b6fff]
> [ 0.953833] Simple Boot Flag at 0x44 set to 0x1
> [ 0.954119] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
> [ 0.954229] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954237] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954247] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954255] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954263] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954271] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954280] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954288] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954345] microcode: Microcode Update Driver: v2.00
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.954371] Scanning for low memory corruption every 60 seconds
> [ 0.954738] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 0.954761] Initialise system trusted keyring
> [ 0.954782] audit: initializing netlink subsys (disabled)
> [ 0.954797] audit: type=2000 audit(1433268991.904:1): initialized
> [ 0.955191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.956707] zpool: loaded
> [ 0.956709] zbud: loaded
> [ 0.956865] VFS: Disk quotas dquot_6.5.2
> [ 0.956900] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 0.957337] fuse init (API version 7.23)
> [ 0.957476] Key type big_key registered
> [ 0.957884] Key type asymmetric registered
> [ 0.957888] Asymmetric key parser 'x509' registered
> [ 0.957940] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 251)
> [ 0.957994] io scheduler noop registered
> [ 0.957998] io scheduler deadline registered (default)
> [ 0.958031] io scheduler cfq registered
> [ 0.958482] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.958497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.958530] efifb: probing for efifb
> [ 0.958548] efifb: framebuffer at 0xb0000000, mapped to
> 0xffffc90010f00000, using 4160k, total 4160k
> [ 0.958549] efifb: mode is 1366x768x32, linelength=5504, pages=1
> [ 0.958550] efifb: scrolling: redraw
> [ 0.958552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 0.960991] Console: switching to colour frame buffer device 170x48
> [ 0.963246] fb0: EFI VGA frame buffer device
> [ 0.963256] intel_idle: MWAIT substates: 0x21120
> [ 0.963257] intel_idle: v0.4 model 0x3A
> [ 0.963258] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.963940] ACPI: AC Adapter [ACAD] (on-line)
> [ 0.964030] input: Lid Switch as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [ 0.964619] ACPI: Lid Switch [LID0]
> [ 0.964661] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [ 0.964665] ACPI: Power Button [PWRB]
> [ 0.964707] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.964709] ACPI: Power Button [PWRF]
> [ 0.966168] [Firmware Bug]: Invalid critical threshold (0)
> [ 0.967956] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.967958] ACPI: Thermal Zone [TZ01] (58 C)
> [ 0.967989] GHES: HEST is not enabled!
> [ 0.968128] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.970503] Linux agpgart interface v0.103
> [ 0.972654] brd: module loaded
> [ 0.973752] loop: module loaded
> [ 0.973979] libphy: Fixed MDIO Bus: probed
> [ 0.973984] tun: Universal TUN/TAP device driver, 1.6
> [ 0.973985] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 0.974042] PPP generic driver version 2.4.2
> [ 0.974223] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.974230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 1
> [ 0.974322] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version
> 0x100 quirks 0x0000b930
> [ 0.974330] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [ 0.974415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.974417] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.974418] usb usb1: Product: xHCI Host Controller
> [ 0.974420] usb usb1: Manufacturer: Linux 4.0.4-040004-generic xhci-hcd
> [ 0.974421] usb usb1: SerialNumber: 0000:00:14.0
> [ 0.974533] hub 1-0:1.0: USB hub found
> [ 0.974544] hub 1-0:1.0: 4 ports detected
> [ 0.974888] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.974892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 2
> [ 0.974926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.974928] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.974929] usb usb2: Product: xHCI Host Controller
> [ 0.974931] usb usb2: Manufacturer: Linux 4.0.4-040004-generic xhci-hcd
> [ 0.974932] usb usb2: SerialNumber: 0000:00:14.0
> [ 0.975031] hub 2-0:1.0: USB hub found
> [ 0.975040] hub 2-0:1.0: 4 ports detected
> [ 0.975357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.975364] ehci-pci: EHCI PCI platform driver
> [ 0.975455] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 0.975459] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
> [ 0.975472] ehci-pci 0000:00:1a.0: debug port 2
> [ 0.979369] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 0.979381] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000
> [ 0.989664] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 0.989695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.989696] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.989698] usb usb3: Product: EHCI Host Controller
> [ 0.989700] usb usb3: Manufacturer: Linux 4.0.4-040004-generic ehci_hcd
> [ 0.989701] usb usb3: SerialNumber: 0000:00:1a.0
> [ 0.989838] hub 3-0:1.0: USB hub found
> [ 0.989844] hub 3-0:1.0: 2 ports detected
> [ 0.990019] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 0.990024] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
> bus number 4
> [ 0.990037] ehci-pci 0000:00:1d.0: debug port 2
> [ 0.993940] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 0.993952] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc2618000
> [ 1.005684] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 1.005714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.005715] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.005717] usb usb4: Product: EHCI Host Controller
> [ 1.005718] usb usb4: Manufacturer: Linux 4.0.4-040004-generic ehci_hcd
> [ 1.005720] usb usb4: SerialNumber: 0000:00:1d.0
> [ 1.005903] hub 4-0:1.0: USB hub found
> [ 1.005912] hub 4-0:1.0: 2 ports detected
> [ 1.006020] ehci-platform: EHCI generic platform driver
> [ 1.006032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.006042] ohci-pci: OHCI PCI platform driver
> [ 1.006054] ohci-platform: OHCI generic platform driver
> [ 1.006064] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.006117] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
> at 0x60,0x64 irq 1,12
> [ 1.013855] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.013860] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.014106] mousedev: PS/2 mouse device common for all mice
> [ 1.014501] rtc_cmos 00:01: RTC can wake from S4
> [ 1.014663] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 1.014694] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram,
> hpet irqs
> [ 1.014711] i2c /dev entries driver
> [ 1.014761] device-mapper: uevent: version 1.0.3
> [ 1.014830] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22)
> initialised: dm-devel@redhat.com
> [ 1.014846] Intel P-state driver initializing.
> [ 1.015081] ledtrig-cpu: registered to indicate activity on CPUs
> [ 1.015085] EFI Variables Facility v0.08 2004-May-17
> [ 1.027241] ACPI: Battery Slot [BAT0] (battery present)
> [ 1.032009] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> [ 1.302036] usb 3-1: new high-speed USB device number 2 using ehci-pci
> [ 1.318046] usb 4-1: new high-speed USB device number 2 using ehci-pci
> [ 1.450600] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.450603] usb 3-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.450888] hub 3-1:1.0: USB hub found
> [ 1.451095] hub 3-1:1.0: 6 ports detected
> [ 1.462608] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.462611] usb 4-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.462879] hub 4-1:1.0: USB hub found
> [ 1.462986] hub 4-1:1.0: 6 ports detected
> [ 1.496745] PCCT header not found.
> [ 1.496843] TCP: cubic registered
> [ 1.496926] NET: Registered protocol family 10
> [ 1.497238] NET: Registered protocol family 17
> [ 1.497249] Key type dns_resolver registered
> [ 1.497900] Loading compiled-in X.509 certificates
> [ 1.498587] Loaded X.509 cert 'Magrathea: Glacier signing key:
> a3b066b3f282dcaa6100a630f5e6827dfa1dd226'
> [ 1.498601] registered taskstats version 1
> [ 1.500328] Key type trusted registered
> [ 1.504389] Key type encrypted registered
> [ 1.504395] AppArmor: AppArmor sha1 policy hashing enabled
> [ 1.504399] ima: No TPM chip found, activating TPM-bypass!
> [ 1.504416] evm: HMAC attrs: 0x1
> [ 1.504911] Magic number: 3:777:290
> [ 1.504928] tty tty23: hash matches
> [ 1.505028] rtc_cmos 00:01: setting system clock to 2015-06-02
> 18:16:32 UTC (1433268992)
> [ 1.505085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.505085] EDD information not available.
> [ 1.505161] PM: Hibernation image not present or could not be loaded.
> [ 1.505518] Freeing unused kernel memory: 1420K (ffffffff81d1e000 -
> ffffffff81e81000)
> [ 1.505519] Write protecting the kernel read-only data: 12288k
> [ 1.505768] Freeing unused kernel memory: 28K (ffff8800027f9000 -
> ffff880002800000)
> [ 1.505844] Freeing unused kernel memory: 176K (ffff880002bd4000 -
> ffff880002c00000)
> [ 1.514468] systemd-udevd[156]: starting version 204
> [ 1.526896] wmi: Mapper loaded
> [ 1.528469] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en
> = 1, pci->irq = 25
> [ 1.530275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 1.530284] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have
> ASPM control
> [ 1.530539] ahci 0000:00:1f.2: version 3.0
> [ 1.530702] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90010ea8000,
> 38:ea:a7:ef:c4:7f, XID 00c00000 IRQ 26
> [ 1.532800] [drm] Initialized drm 1.1.0 20060810
> [ 1.546272] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
> 0x11 impl SATA mode
> [ 1.546277] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
> part ems apst
> [ 1.554694] scsi host0: ahci
> [ 1.554789] scsi host1: ahci
> [ 1.554866] scsi host2: ahci
> [ 1.554945] scsi host3: ahci
> [ 1.555025] scsi host4: ahci
> [ 1.555102] scsi host5: ahci
> [ 1.555140] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port
> 0xc2617100 irq 27
> [ 1.555141] ata2: DUMMY
> [ 1.555142] ata3: DUMMY
> [ 1.555143] ata4: DUMMY
> [ 1.555146] ata5: SATA max UDMA/133 abar m2048@0xc2617000 port
> 0xc2617300 irq 27
> [ 1.555146] ata6: DUMMY
> [ 1.555645] [drm] Memory usable by graphics device = 2048M
> [ 1.555648] checking generic (b0000000 410000) vs hw (b0000000 10000000)
> [ 1.555649] fb: switching to inteldrmfb from EFI VGA
> [ 1.555665] Console: switching to colour dummy device 80x25
> [ 1.555729] [drm] Replacing VGA console driver
> [ 1.578429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 1.578432] [drm] Driver supports precise vblank timestamp query.
> [ 1.578530] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 1.603080] ACPI: Video Device [GFX0] (multi-head: yes rom: no
> post: no)
> [ 1.603180] input: Video Bus as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
> [ 1.603304] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on
> minor 0
> [ 1.619877] fbcon: inteldrmfb (fb0) is primary device
> [ 1.734631] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
> [ 1.874696] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.874719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.878252] ata1.00: ATA-8: TOSHIBA MQ01ABD050, AX001C, max UDMA/100
> [ 1.878255] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.878901] ata5.00: ATAPI: hp DVD A DS8A9SH, EH61, max UDMA/100
> [ 1.883276] ata1.00: configured for UDMA/100
> [ 1.883515] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0
> 1C PQ: 0 ANSI: 5
> [ 1.883885] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
> GB/465 GiB)
> [ 1.883887] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 1.883935] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.883937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.883949] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.883953] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.885360] ata5.00: configured for UDMA/100
> [ 1.898498] usb 4-1.5: New USB device found, idVendor=04f2,
> idProduct=b34f
> [ 1.898501] usb 4-1.5: New USB device strings: Mfr=3, Product=1,
> SerialNumber=2
> [ 1.898504] usb 4-1.5: Product: HP Truevision HD
> [ 1.898506] usb 4-1.5: Manufacturer: Chicony Electronics Co.,Ltd.
> [ 1.898507] usb 4-1.5: SerialNumber: 0x0001
> [ 1.900204] scsi 4:0:0:0: CD-ROM hp DVD A DS8A9SH
> EH61 PQ: 0 ANSI: 5
> [ 1.928519] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram
> cd/rw xa/form2 cdda tray
> [ 1.928521] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.928750] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 1.928890] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 1.954748] tsc: Refined TSC clocksource calibration: 2195.017 MHz
> [ 2.027776] sda: sda1 sda2 sda3
> [ 2.028388] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.259514] psmouse serio1: synaptics: queried max coordinates: x
> [..5734], y [..4974]
> [ 2.276505] Console: switching to colour frame buffer device 170x48
> [ 2.278136] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 2.278137] i915 0000:00:02.0: registered panic notifier
> [ 2.290527] psmouse serio1: synaptics: queried min coordinates: x
> [1222..], y [910..]
> [ 2.351700] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5,
> id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260
> [ 2.390654] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input6
> [ 2.548403] random: lvm urandom read with 88 bits of entropy available
> [ 2.955910] Switched to clocksource tsc
> [ 3.198786] random: nonblocking pool is initialized
> [ 3.766861] EXT4-fs (dm-0): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 16.661427] Adding 8273916k swap on /dev/mapper/mint--vg-swap_1.
> Priority:-1 extents:1 across:8273916k FS
> [ 16.706670] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
> [ 16.735621] systemd-udevd[494]: starting version 204
> [ 16.830795] EXT4-fs (sda2): mounting ext2 file system using the ext4
> subsystem
> [ 16.866256] EXT4-fs (sda2): mounted filesystem without journal. Opts:
> (null)
> [ 17.268281] Initializing HPQ6001 module
> [ 17.268338] input: HP Wireless hotkeys as /devices/virtual/input/input8
> [ 17.274392] ACPI Warning: SystemIO range
> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
> 0x0000000000000400-0x000000000000047F (\PMIO) (20150204/utaddress-254)
> [ 17.274397] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274400] ACPI Warning: SystemIO range
> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274403] ACPI Warning: SystemIO range
> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274406] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274407] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274409] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274411] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274412] ACPI Warning: SystemIO range
> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274414] ACPI Warning: SystemIO range
> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274416] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274417] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 17.314154] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 17.345836] device-mapper: multipath: version 1.8.0 loaded
> [ 17.446329] hp_accel: laptop model unknown, using default axes
> configuration
> [ 17.455408] lis3lv02d: 8 bits 3DC sensor found
> [ 17.481401] input: HP WMI hotkeys as /devices/virtual/input/input9
> [ 17.498977] input: ST LIS3LV02DL Accelerometer as
> /devices/platform/lis3lv02d/input/input10
> [ 17.657604] lp: driver loaded but no devices found
> [ 17.677845] AVX version of gcm_enc/dec engaged.
> [ 17.677848] AES CTR mode by8 optimization enabled
> [ 17.745457] ppdev: user-space parallel port driver
> [ 17.865730] cfg80211: Calling CRDA to update world regulatory domain
> [ 18.003928] media: Linux media interface: v0.10
> [ 18.046828] cfg80211: World regulatory domain updated:
> [ 18.046831] cfg80211: DFS Master region: unset
> [ 18.046832] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 18.046834] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046836] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046838] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046839] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.294279] Linux video capture interface: v2.00
> [ 18.373666] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390,
> rev 1502 detected
> [ 18.377795] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390
> detected
> [ 18.407552] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 18.425361] intel_rapl: Found RAPL domain package
> [ 18.425365] intel_rapl: Found RAPL domain core
> [ 18.425366] intel_rapl: Found RAPL domain uncore
> [ 18.513909] sound hdaudioC0D0: autoconfig for 92HD87B2/4: line_outs=1
> (0xd/0x0/0x0/0x0/0x0) type:speaker
> [ 18.513913] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 18.513914] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> [ 18.513915] sound hdaudioC0D0: mono: mono_out=0x0
> [ 18.513917] sound hdaudioC0D0: inputs:
> [ 18.513918] sound hdaudioC0D0: Internal Mic=0x11
> [ 18.513920] sound hdaudioC0D0: Mic=0xc
> [ 18.546226] input: HDA Intel PCH Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 18.546287] input: HDA Intel PCH Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 18.546338] input: HDA Intel PCH HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 18.666979] init: failsafe main process (804) killed by TERM signal
> [ 18.782999] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
> [ 18.794320] input: HP Truevision HD as
> /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input14
> [ 18.794434] usbcore: registered new interface driver uvcvideo
> [ 18.794435] USB Video Class driver (1.1.1)
> [ 20.249433] init: cups main process (890) killed by HUP signal
> [ 20.249442] init: cups main process ended, respawning
> [ 20.360775] Bluetooth: Core ver 2.20
> [ 20.360790] NET: Registered protocol family 31
> [ 20.360791] Bluetooth: HCI device and connection manager initialized
> [ 20.360794] Bluetooth: HCI socket layer initialized
> [ 20.360796] Bluetooth: L2CAP socket layer initialized
> [ 20.360800] Bluetooth: SCO socket layer initialized
> [ 20.439989] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 20.439993] Bluetooth: BNEP filters: protocol multicast
> [ 20.439996] Bluetooth: BNEP socket layer initialized
> [ 20.615008] Bluetooth: RFCOMM TTY layer initialized
> [ 20.615015] Bluetooth: RFCOMM socket layer initialized
> [ 20.615021] Bluetooth: RFCOMM ver 1.11
> [ 21.750860] ieee80211 phy0: rt2x00lib_request_firmware: Info -
> Loading firmware file 'rt2860.bin'
> [ 22.012353] ieee80211 phy0: rt2x00lib_request_firmware: Info -
> Firmware detected - version: 0.34
> [ 22.140387] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 22.268946] init: samba-ad-dc main process (965) terminated with status 1
> [ 22.419098] r8169 0000:02:00.0 eth0: link down
> [ 22.419132] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 24.717319] init: plymouth-upstart-bridge main process ended, respawning
> [ 47.164869] wlan0: authenticate with 00:50:7f:cb:f6:e0
> [ 47.175079] wlan0: direct probe to 00:50:7f:cb:f6:e0 (try 1/3)
> [ 47.378217] wlan0: send auth to 00:50:7f:cb:f6:e0 (try 2/3)
> [ 47.379386] wlan0: authenticated
> [ 47.382224] wlan0: associate with 00:50:7f:cb:f6:e0 (try 1/3)
> [ 47.398705] wlan0: RX AssocResp from 00:50:7f:cb:f6:e0 (capab=0x411
> status=0 aid=2)
> [ 47.398799] wlan0: associated
> [ 47.398809] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 82.070656] init: plymouth-stop pre-start process (2423) terminated
> with status 1
>
>
> Kind regards
> Markus
>
>
> Am 02.06.2015 um 20:25 schrieb Albino Biasutti Neto:
>> 2015-06-02 12:18 GMT-03:00 Markus Weyermann <markus.weyermann@gmx.net>:
>>> Notebook "HP Pavilion g6", GPT, LVM, UEFI, Secure boot
>>
>> Command dmesg and more infos.
>>
>>
>> Albino
>>
--
Albino
^ permalink raw reply [flat|nested] 7+ messages in thread