From: Peter Chen <peter.chen@freescale.com>
To: Saurabh Sengar <saurabh.truth@gmail.com>
Cc: <gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb : replace dma_pool_alloc and memset with dma_pool_zalloc
Date: Wed, 28 Oct 2015 17:14:54 +0800 [thread overview]
Message-ID: <20151028091446.GB10432@shlinux2> (raw)
In-Reply-To: <1446016475-17100-1-git-send-email-saurabh.truth@gmail.com>
On Wed, Oct 28, 2015 at 12:44:35PM +0530, Saurabh Sengar wrote:
> replace dma_pool_alloc and memset with a single call to dma_pool_zalloc
>
> Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
> ---
> drivers/usb/chipidea/udc.c | 3 +--
> drivers/usb/gadget/udc/gr_udc.c | 3 +--
> drivers/usb/host/uhci-q.c | 3 +--
> drivers/usb/host/whci/qset.c | 3 +--
> drivers/usb/host/xhci-mem.c | 6 ++----
> 5 files changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 8223fe7..235b948f 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -349,14 +349,13 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
> if (node == NULL)
> return -ENOMEM;
>
> - node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
> + node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
> &node->dma);
> if (node->ptr == NULL) {
> kfree(node);
> return -ENOMEM;
> }
>
> - memset(node->ptr, 0, sizeof(struct ci_hw_td));
> node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
> node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
> node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
> diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
> index b9429bc..39b7136 100644
> --- a/drivers/usb/gadget/udc/gr_udc.c
> +++ b/drivers/usb/gadget/udc/gr_udc.c
> @@ -253,13 +253,12 @@ static struct gr_dma_desc *gr_alloc_dma_desc(struct gr_ep *ep, gfp_t gfp_flags)
> dma_addr_t paddr;
> struct gr_dma_desc *dma_desc;
>
> - dma_desc = dma_pool_alloc(ep->dev->desc_pool, gfp_flags, &paddr);
> + dma_desc = dma_pool_zalloc(ep->dev->desc_pool, gfp_flags, &paddr);
> if (!dma_desc) {
> dev_err(ep->dev->dev, "Could not allocate from DMA pool\n");
> return NULL;
> }
>
> - memset(dma_desc, 0, sizeof(*dma_desc));
> dma_desc->paddr = paddr;
>
> return dma_desc;
> diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
> index da6f56d..c17ea15 100644
> --- a/drivers/usb/host/uhci-q.c
> +++ b/drivers/usb/host/uhci-q.c
> @@ -248,11 +248,10 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
> dma_addr_t dma_handle;
> struct uhci_qh *qh;
>
> - qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
> + qh = dma_pool_zalloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
> if (!qh)
> return NULL;
>
> - memset(qh, 0, sizeof(*qh));
> qh->dma_handle = dma_handle;
>
> qh->element = UHCI_PTR_TERM(uhci);
> diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
> index dc31c42..3297473 100644
> --- a/drivers/usb/host/whci/qset.c
> +++ b/drivers/usb/host/whci/qset.c
> @@ -30,10 +30,9 @@ struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
> struct whc_qset *qset;
> dma_addr_t dma;
>
> - qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
> + qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma);
> if (qset == NULL)
> return NULL;
> - memset(qset, 0, sizeof(struct whc_qset));
>
> qset->qset_dma = dma;
> qset->whc = whc;
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> index 41f841f..060c20c 100644
> --- a/drivers/usb/host/xhci-mem.c
> +++ b/drivers/usb/host/xhci-mem.c
> @@ -47,13 +47,12 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
> if (!seg)
> return NULL;
>
> - seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
> + seg->trbs = dma_pool_zalloc(xhci->segment_pool, flags, &dma);
> if (!seg->trbs) {
> kfree(seg);
> return NULL;
> }
>
> - memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
> /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
> if (cycle_state == 0) {
> for (i = 0; i < TRBS_PER_SEGMENT; i++)
> @@ -517,12 +516,11 @@ static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci
> if (type == XHCI_CTX_TYPE_INPUT)
> ctx->size += CTX_SIZE(xhci->hcc_params);
>
> - ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
> + ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
> if (!ctx->bytes) {
> kfree(ctx);
> return NULL;
> }
> - memset(ctx->bytes, 0, ctx->size);
> return ctx;
> }
>
> --
For chipidea changes:
Acked-by: Peter Chen <peter.chen@freescale.com>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-10-28 9:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 7:14 [PATCH] usb : replace dma_pool_alloc and memset with dma_pool_zalloc Saurabh Sengar
2015-10-28 9:14 ` Peter Chen [this message]
2015-11-25 3:19 ` Saurabh Sengar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151028091446.GB10432@shlinux2 \
--to=peter.chen@freescale.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=saurabh.truth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox