* [PATCH] mfd: Allow i2c modular drivers to build with I2C=m
@ 2016-01-21 0:49 Axel Lin
2016-01-21 9:53 ` Opensource [Adam Thomson]
2016-01-25 12:50 ` Lee Jones
0 siblings, 2 replies; 3+ messages in thread
From: Axel Lin @ 2016-01-21 0:49 UTC (permalink / raw)
To: Lee Jones; +Cc: Geert Uytterhoeven, Adam Thomson, Chao Xie, linux-kernel
These drivers can be built as module, so make them depend on I2C rather
than I2C=y.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/mfd/Kconfig | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..6c4ebd9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -203,7 +203,7 @@ config MFD_DA9062
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y
+ depends on I2C
help
Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
This includes the I2C driver and core APIs.
@@ -215,7 +215,7 @@ config MFD_DA9063
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y
+ depends on I2C
help
Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
This includes the I2C driver and core APIs.
@@ -224,7 +224,7 @@ config MFD_DA9063
config MFD_DA9150
tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
- depends on I2C=y
+ depends on I2C
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -445,7 +445,7 @@ config MFD_KEMPLD
config MFD_88PM800
tristate "Marvell 88PM800"
- depends on I2C=y
+ depends on I2C
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
@@ -457,7 +457,7 @@ config MFD_88PM800
config MFD_88PM805
tristate "Marvell 88PM805"
- depends on I2C=y
+ depends on I2C
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
@@ -538,7 +538,7 @@ config MFD_MAX77843
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
- depends on I2C=y
+ depends on I2C
select REGMAP_I2C
select REGMAP_IRQ
help
@@ -743,7 +743,7 @@ config MFD_RTSX_PCI
config MFD_RT5033
tristate "Richtek RT5033 Power Management IC"
- depends on I2C=y
+ depends on I2C
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m
2016-01-21 0:49 [PATCH] mfd: Allow i2c modular drivers to build with I2C=m Axel Lin
@ 2016-01-21 9:53 ` Opensource [Adam Thomson]
2016-01-25 12:50 ` Lee Jones
1 sibling, 0 replies; 3+ messages in thread
From: Opensource [Adam Thomson] @ 2016-01-21 9:53 UTC (permalink / raw)
To: Axel Lin, Lee Jones
Cc: Geert Uytterhoeven, Opensource [Adam Thomson], Chao Xie,
linux-kernel@vger.kernel.org
On January 21, 2016 00:50, Axel Lin wrote:
> These drivers can be built as module, so make them depend on I2C rather
> than I2C=y.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
For Dialog devices:
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m
2016-01-21 0:49 [PATCH] mfd: Allow i2c modular drivers to build with I2C=m Axel Lin
2016-01-21 9:53 ` Opensource [Adam Thomson]
@ 2016-01-25 12:50 ` Lee Jones
1 sibling, 0 replies; 3+ messages in thread
From: Lee Jones @ 2016-01-25 12:50 UTC (permalink / raw)
To: Axel Lin; +Cc: Geert Uytterhoeven, Adam Thomson, Chao Xie, linux-kernel
On Thu, 21 Jan 2016, Axel Lin wrote:
> These drivers can be built as module, so make them depend on I2C rather
> than I2C=y.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> drivers/mfd/Kconfig | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..6c4ebd9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -203,7 +203,7 @@ config MFD_DA9062
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> - depends on I2C=y
> + depends on I2C
> help
> Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
> This includes the I2C driver and core APIs.
> @@ -215,7 +215,7 @@ config MFD_DA9063
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> - depends on I2C=y
> + depends on I2C
> help
> Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
> This includes the I2C driver and core APIs.
> @@ -224,7 +224,7 @@ config MFD_DA9063
>
> config MFD_DA9150
> tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
> - depends on I2C=y
> + depends on I2C
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> @@ -445,7 +445,7 @@ config MFD_KEMPLD
>
> config MFD_88PM800
> tristate "Marvell 88PM800"
> - depends on I2C=y
> + depends on I2C
> select REGMAP_I2C
> select REGMAP_IRQ
> select MFD_CORE
> @@ -457,7 +457,7 @@ config MFD_88PM800
>
> config MFD_88PM805
> tristate "Marvell 88PM805"
> - depends on I2C=y
> + depends on I2C
> select REGMAP_I2C
> select REGMAP_IRQ
> select MFD_CORE
> @@ -538,7 +538,7 @@ config MFD_MAX77843
> config MFD_MAX8907
> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> select MFD_CORE
> - depends on I2C=y
> + depends on I2C
> select REGMAP_I2C
> select REGMAP_IRQ
> help
> @@ -743,7 +743,7 @@ config MFD_RTSX_PCI
>
> config MFD_RT5033
> tristate "Richtek RT5033 Power Management IC"
> - depends on I2C=y
> + depends on I2C
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-01-25 12:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-21 0:49 [PATCH] mfd: Allow i2c modular drivers to build with I2C=m Axel Lin
2016-01-21 9:53 ` Opensource [Adam Thomson]
2016-01-25 12:50 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox