* [PATCH] dmaengine: zynqmp_dma: Fix static checker warning
@ 2016-07-13 10:42 Kedareswara rao Appana
2016-07-13 11:31 ` Dan Carpenter
0 siblings, 1 reply; 3+ messages in thread
From: Kedareswara rao Appana @ 2016-07-13 10:42 UTC (permalink / raw)
To: dan.j.williams, vinod.koul, michal.simek, soren.brinkmann,
appanad, arnd, dan.carpenter
Cc: dmaengine, linux-arm-kernel, linux-kernel
This patch fixes the below static checker warning
drivers/dma/xilinx/zynqmp_dma.c:973 zynqmp_dma_chan_probe()
warn: was && intended here instead of ||?
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
drivers/dma/xilinx/zynqmp_dma.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index f777a5b..2248704 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width);
- if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
- (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128))) {
+ if (err < 0) {
+ dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
+ return err;
+ }
+
+ if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
+ (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) {
dev_err(zdev->dev, "invalid bus-width value");
return err;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] dmaengine: zynqmp_dma: Fix static checker warning
2016-07-13 10:42 [PATCH] dmaengine: zynqmp_dma: Fix static checker warning Kedareswara rao Appana
@ 2016-07-13 11:31 ` Dan Carpenter
2016-07-13 12:00 ` Appana Durga Kedareswara Rao
0 siblings, 1 reply; 3+ messages in thread
From: Dan Carpenter @ 2016-07-13 11:31 UTC (permalink / raw)
To: Kedareswara rao Appana
Cc: dan.j.williams, vinod.koul, michal.simek, soren.brinkmann,
appanad, arnd, dmaengine, linux-arm-kernel, linux-kernel
On Wed, Jul 13, 2016 at 04:12:16PM +0530, Kedareswara rao Appana wrote:
> diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
> index f777a5b..2248704 100644
> --- a/drivers/dma/xilinx/zynqmp_dma.c
> +++ b/drivers/dma/xilinx/zynqmp_dma.c
> @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
> chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
> chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
> err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width);
> - if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
> - (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128))) {
> + if (err < 0) {
> + dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
> + return err;
> + }
> +
> + if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
This has to be an && because it can never be both widths. You didn't
test this patch. Also too many parenthesis (you're thinking of LISP).
> + (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) {
> dev_err(zdev->dev, "invalid bus-width value");
> return err;
This has to be a negative error code.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH] dmaengine: zynqmp_dma: Fix static checker warning
2016-07-13 11:31 ` Dan Carpenter
@ 2016-07-13 12:00 ` Appana Durga Kedareswara Rao
0 siblings, 0 replies; 3+ messages in thread
From: Appana Durga Kedareswara Rao @ 2016-07-13 12:00 UTC (permalink / raw)
To: Dan Carpenter
Cc: dan.j.williams@intel.com, vinod.koul@intel.com, Michal Simek,
Soren Brinkmann, arnd@arndb.de, dmaengine@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Hi Dan,
Thanks for the review...
> On Wed, Jul 13, 2016 at 04:12:16PM +0530, Kedareswara rao Appana wrote:
> > diff --git a/drivers/dma/xilinx/zynqmp_dma.c
> > b/drivers/dma/xilinx/zynqmp_dma.c index f777a5b..2248704 100644
> > --- a/drivers/dma/xilinx/zynqmp_dma.c
> > +++ b/drivers/dma/xilinx/zynqmp_dma.c
> > @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct
> zynqmp_dma_device *zdev,
> > chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
> > chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
> > err = of_property_read_u32(node, "xlnx,bus-width", &chan-
> >bus_width);
> > - if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
> > - (chan->bus_width !=
> ZYNQMP_DMA_BUS_WIDTH_128))) {
> > + if (err < 0) {
> > + dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
> > + return err;
> > + }
> > +
> > + if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
>
> This has to be an && because it can never be both widths. You didn't test this
> patch. Also too many parenthesis (you're thinking of LISP).
Will fix in the next version...
>
> > + (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) {
> > dev_err(zdev->dev, "invalid bus-width value");
> > return err;
>
> This has to be a negative error code.
Will fix in the next version...
Regards,
Kedar.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-07-13 12:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-13 10:42 [PATCH] dmaengine: zynqmp_dma: Fix static checker warning Kedareswara rao Appana
2016-07-13 11:31 ` Dan Carpenter
2016-07-13 12:00 ` Appana Durga Kedareswara Rao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox