* [PATCH] regulator: gpio-regulator: doc: correct default type
@ 2017-02-03 14:29 Hans Holmberg
0 siblings, 0 replies; only message in thread
From: Hans Holmberg @ 2017-02-03 14:29 UTC (permalink / raw)
To: Mark Brown; +Cc: Rob Herring, linux-kernel, Liam Girdwood
The driver defaults to voltage, not current, type so correct
this in the device tree binding documentation.
Signed-off-by: Hans Holmberg <hans@pixelmunchies.com>
---
See drivers/regulator/gpio-regulator.c:231
..and the example in the binding doc is voltage regulator
without regulator-type specified.
Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index e5cac1e..dd1ed78 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
- startup-delay-us : Startup time in microseconds.
- enable-active-high : Polarity of GPIO is active high (default is low).
- regulator-type : Specifies what is being regulated, must be either
- "voltage" or "current", defaults to current.
+ "voltage" or "current", defaults to voltage.
Any property defined as part of the core regulator binding defined in
regulator.txt can also be used.
--
1.9.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2017-02-03 14:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-03 14:29 [PATCH] regulator: gpio-regulator: doc: correct default type Hans Holmberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox