[RESEND PATCH v5 0/7] mfd: cros_ec: add subdevices and fixes

[RESEND PATCH v5 0/7] mfd: cros_ec: add subdevices and fixes

[Enric Balletbo i Serra]

Hi,

This is the five version of a patchset that collects some patches
already send but that needed some rework due the patchset to split the
cros_ec_devs modules in 2 parts. This patchset contains some improvements
and also some fixes. They can be applied independently and I think that
all can go through the MFD tree.

Note: In this RESEND I removed the patch

[PATCH v5 4/8] mfd: cros_ec_dev: Register cros-ec-rtc driver as a
               subdevice

This patch needs some minor changes but actually I don't have the
hardware to test it. The other patches has no dependency on this one,
I'll send the above patch once I have the hardware to test again.

Best regards,
 Enric

Changes in v5:
- [4/8] For mfd_cell struct use one line and no need for the comma.

Changes in v4:
- [2/8] Add Acked-by Lee Jones.
- [3/8] Add Acked-by Lee Jones.
- [4/8] Nit: check -> Check (Lee Jones)
- [4/8] Use ARRAY_SIZE() instead of hardcoded number (Lee Jones)
- [6/8] Add Acked-by Lee Jones.
- [7/8] Add Acked-by Lee Jones
- [7/8] Remove comma in terminator.
- [8/8] Add Acked-by Lee Jones.

Changes in v3:
- [2/8] Add Acked-by Vincent Palatin.
- [2/8] Add Reviewed-by Andy Shevchenko.
- [3/8] Add Reviewed-by Andy Shevchenko.
- [4/8] Add the Reviewed-by Andy Shevchenko.
- [6/8] Add the Reviewed-by Andy Shevchenko.
- [7/8] Add the Reviewed-by Andy Shevchenko.
- [7/8] Avoid commas in terminator entries.
- [8/8] Add static to cros_ec_i2c_pm_ops.
- [8/8] Add the Reviewed-by Andy Shevchenko.

Changes in v2:
- [2/8] Remove the free_irq in cros_ec_remove.
- [3/8] That patch is new in this series.
- [4/8] Add the Reviewed-by Gwendal.
- [6/8] This patch is new in this series.
- [7/8] Add the Reviewed-by Gwendal.
- [8/8] This patch is new in this series replacing [5/6] of v1.

Daniel Hung-yu Wu (1):
  mfd: cros_ec_dev: register shutdown function for debugfs

Douglas Anderson (1):
  mfd: cros_ec: Don't try to grab log when suspended

Enric Balletbo i Serra (1):
  mfd: cros_ec_dev: Register cros-ec-rtc driver as a subdevice.

Joseph Lo (1):
  mfd: cros_ec_i2c: moving the system sleep pm ops to late

Vincent Palatin (2):
  mfd: cros_ec: fail early if we cannot identify the EC
  mfd: cros_ec: free IRQ automatically

Wei-Ning Huang (1):
  mfd: cros_ec_i2c: add ACPI module device table

 drivers/mfd/cros_ec.c                     | 26 ++++++++-----------
 drivers/mfd/cros_ec_dev.c                 | 31 ++++++++++++++++++++++-
 drivers/mfd/cros_ec_i2c.c                 | 17 +++++++++++--
 drivers/platform/chrome/cros_ec_debugfs.c | 20 +++++++++++++++
 include/linux/mfd/cros_ec.h               |  2 ++
 5 files changed, 78 insertions(+), 18 deletions(-)

-- 
2.17.0

[RESEND PATCH v5 1/7] mfd: cros_ec: fail early if we cannot identify the EC

[Enric Balletbo i Serra]

From: Vincent Palatin <vpalatin@chromium.org>

If we cannot communicate with the EC chip to detect the protocol version
and its features, it's very likely useless to continue. Else we will
commit all kind of uninformed mistakes (using the wrong protocol, the
wrong buffer size, mixing the EC with other chips).

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/mfd/cros_ec.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index d61024141e2b..74780f2964a1 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -112,7 +112,11 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 
 	mutex_init(&ec_dev->lock);
 
-	cros_ec_query_all(ec_dev);
+	err = cros_ec_query_all(ec_dev);
+	if (err) {
+		dev_err(dev, "Cannot identify the EC: error %d\n", err);
+		return err;
+	}
 
 	if (ec_dev->irq) {
 		err = request_threaded_irq(ec_dev->irq, NULL, ec_irq_thread,
-- 
2.17.0

[RESEND PATCH v5 2/7] mfd: cros_ec: free IRQ automatically

[Enric Balletbo i Serra]

From: Vincent Palatin <vpalatin@chromium.org>

Free the IRQ we might have requested when removing the cros_ec device,
so we can unload and reload the driver properly.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4:
- [2/8] Add Acked-by Lee Jones.

Changes in v3:
- [2/8] Add Acked-by Vincent Palatin.
- [2/8] Add Reviewed-by Andy Shevchenko.

Changes in v2:
- [2/8] Remove the free_irq in cros_ec_remove.

 drivers/mfd/cros_ec.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 74780f2964a1..ea8aa704b61e 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -119,9 +119,9 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 	}
 
 	if (ec_dev->irq) {
-		err = request_threaded_irq(ec_dev->irq, NULL, ec_irq_thread,
-					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-					   "chromeos-ec", ec_dev);
+		err = devm_request_threaded_irq(dev, ec_dev->irq, NULL,
+				ec_irq_thread, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				"chromeos-ec", ec_dev);
 		if (err) {
 			dev_err(dev, "Failed to request IRQ %d: %d",
 				ec_dev->irq, err);
@@ -135,7 +135,7 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 		dev_err(dev,
 			"Failed to register Embedded Controller subdevice %d\n",
 			err);
-		goto fail_mfd;
+		return err;
 	}
 
 	if (ec_dev->max_passthru) {
@@ -153,7 +153,7 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 			dev_err(dev,
 				"Failed to register Power Delivery subdevice %d\n",
 				err);
-			goto fail_mfd;
+			return err;
 		}
 	}
 
@@ -162,7 +162,7 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 		if (err) {
 			mfd_remove_devices(dev);
 			dev_err(dev, "Failed to register sub-devices\n");
-			goto fail_mfd;
+			return err;
 		}
 	}
 
@@ -180,11 +180,6 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 	cros_ec_acpi_install_gpe_handler(dev);
 
 	return 0;
-
-fail_mfd:
-	if (ec_dev->irq)
-		free_irq(ec_dev->irq, ec_dev);
-	return err;
 }
 EXPORT_SYMBOL(cros_ec_register);
 
@@ -194,9 +189,6 @@ int cros_ec_remove(struct cros_ec_device *ec_dev)
 
 	cros_ec_acpi_remove_gpe_handler();
 
-	if (ec_dev->irq)
-		free_irq(ec_dev->irq, ec_dev);
-
 	return 0;
 }
 EXPORT_SYMBOL(cros_ec_remove);
-- 
2.17.0

[RESEND PATCH v5 3/7] mfd: cros_ec: Don't try to grab log when suspended

[Enric Balletbo i Serra]

From: Douglas Anderson <dianders@chromium.org>

We should stop our worker thread while we're suspended.  If we don't
then we'll get messages like:

  cros-ec-spi spi5.0: spi transfer failed: -108
  cros-ec-spi spi5.0: cs-deassert spi transfer failed: -108
  cros-ec-ctl cros-ec-ctl.0.auto: EC communication failed

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4:
- [3/8] Add Acked-by Lee Jones.

Changes in v3:
- [3/8] Add Reviewed-by Andy Shevchenko.

Changes in v2:
- [3/8] That patch is new in this series.

 drivers/mfd/cros_ec_dev.c                 |  4 ++++
 drivers/platform/chrome/cros_ec_debugfs.c | 20 ++++++++++++++++++++
 include/linux/mfd/cros_ec.h               |  2 ++
 3 files changed, 26 insertions(+)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index eafd06f62a3a..5a7d4e1dea70 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -466,6 +466,8 @@ static __maybe_unused int ec_device_suspend(struct device *dev)
 {
 	struct cros_ec_dev *ec = dev_get_drvdata(dev);
 
+	cros_ec_debugfs_suspend(ec);
+
 	lb_suspend(ec);
 
 	return 0;
@@ -475,6 +477,8 @@ static __maybe_unused int ec_device_resume(struct device *dev)
 {
 	struct cros_ec_dev *ec = dev_get_drvdata(dev);
 
+	cros_ec_debugfs_resume(ec);
+
 	lb_resume(ec);
 
 	return 0;
diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
index cc265ed8deb7..c62ee8e610a0 100644
--- a/drivers/platform/chrome/cros_ec_debugfs.c
+++ b/drivers/platform/chrome/cros_ec_debugfs.c
@@ -470,3 +470,23 @@ void cros_ec_debugfs_remove(struct cros_ec_dev *ec)
 	cros_ec_cleanup_console_log(ec->debug_info);
 }
 EXPORT_SYMBOL(cros_ec_debugfs_remove);
+
+void cros_ec_debugfs_suspend(struct cros_ec_dev *ec)
+{
+	/*
+	 * cros_ec_debugfs_init() failures are non-fatal; it's also possible
+	 * that we initted things but decided that console log wasn't supported.
+	 * We'll use the same set of checks that cros_ec_debugfs_remove() +
+	 * cros_ec_cleanup_console_log() end up using to handle those cases.
+	 */
+	if (ec->debug_info && ec->debug_info->log_buffer.buf)
+		cancel_delayed_work_sync(&ec->debug_info->log_poll_work);
+}
+EXPORT_SYMBOL(cros_ec_debugfs_suspend);
+
+void cros_ec_debugfs_resume(struct cros_ec_dev *ec)
+{
+	if (ec->debug_info && ec->debug_info->log_buffer.buf)
+		schedule_delayed_work(&ec->debug_info->log_poll_work, 0);
+}
+EXPORT_SYMBOL(cros_ec_debugfs_resume);
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 2d4e23c9ea0a..f36125ee9245 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -327,6 +327,8 @@ extern struct attribute_group cros_ec_vbc_attr_group;
 /* debugfs stuff */
 int cros_ec_debugfs_init(struct cros_ec_dev *ec);
 void cros_ec_debugfs_remove(struct cros_ec_dev *ec);
+void cros_ec_debugfs_suspend(struct cros_ec_dev *ec);
+void cros_ec_debugfs_resume(struct cros_ec_dev *ec);
 
 /* ACPI GPE handler */
 #ifdef CONFIG_ACPI
-- 
2.17.0

[RESEND PATCH v5 4/7] mfd: cros_ec_dev: Register cros-ec-rtc driver as a subdevice.

[Enric Balletbo i Serra]

Check whether this EC instance has RTC host command support and instatiate
the RTC driver as a subdevice in such case.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

Changes in v5:
- [4/8] For mfd_cell struct use one line and no need for the comma.

Changes in v4:
- [4/8] Nit: check -> Check (Lee Jones)
- [4/8] Use ARRAY_SIZE() instead of hardcoded number (Lee Jones)

Changes in v3:
- [4/8] Add the Reviewed-by Andy Shevchenko.

Changes in v2:
- [4/8] Add the Reviewed-by Gwendal.

 drivers/mfd/cros_ec_dev.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 5a7d4e1dea70..a393b3c11aa0 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -383,6 +383,10 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 	kfree(msg);
 }
 
+static const struct mfd_cell cros_ec_rtc_cells[] = {
+	{ .name = "cros-ec-rtc" }
+};
+
 static int ec_device_probe(struct platform_device *pdev)
 {
 	int retval = -ENOMEM;
@@ -422,6 +426,18 @@ static int ec_device_probe(struct platform_device *pdev)
 	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
 		cros_ec_sensors_register(ec);
 
+	/* Check whether this EC instance has RTC host command support */
+	if (cros_ec_check_features(ec, EC_FEATURE_RTC)) {
+		retval = mfd_add_devices(ec->dev, PLATFORM_DEVID_AUTO,
+					 cros_ec_rtc_cells,
+					 ARRAY_SIZE(cros_ec_rtc_cells),
+					 NULL, 0, NULL);
+		if (retval)
+			dev_err(ec->dev,
+				"failed to add cros-ec-rtc device: %d\n",
+				retval);
+	}
+
 	/* Take control of the lightbar from the EC. */
 	lb_manual_suspend_ctrl(ec, 1);
 
-- 
2.17.0

[RESEND PATCH v5 5/7] mfd: cros_ec_dev: register shutdown function for debugfs

[Enric Balletbo i Serra]

From: Daniel Hung-yu Wu <hywu@google.com>

Reboot or shutdown during delayed works could corrupt communication with
EC and certain I2C controller may not be able to recover from the error
state.

This patch registers a shutdown callback used to cancel the debugfs log
worker thread.

Signed-off-by: Daniel Hung-yu Wu <hywu@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4:
- [6/8] Add Acked-by Lee Jones.

Changes in v3:
- [6/8] Add the Reviewed-by Andy Shevchenko.

Changes in v2:
- [6/8] This patch is new in this series.

 drivers/mfd/cros_ec_dev.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index a393b3c11aa0..1f889523885d 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -472,6 +472,14 @@ static int ec_device_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void ec_device_shutdown(struct platform_device *pdev)
+{
+	struct cros_ec_dev *ec = dev_get_drvdata(&pdev->dev);
+
+	/* Be sure to clear up debugfs delayed works */
+	cros_ec_debugfs_remove(ec);
+}
+
 static const struct platform_device_id cros_ec_id[] = {
 	{ DRV_NAME, 0 },
 	{ /* sentinel */ },
@@ -514,6 +522,7 @@ static struct platform_driver cros_ec_dev_driver = {
 	},
 	.probe = ec_device_probe,
 	.remove = ec_device_remove,
+	.shutdown = ec_device_shutdown,
 };
 
 static int __init cros_ec_dev_init(void)
-- 
2.17.0

[RESEND PATCH v5 6/7] mfd: cros_ec_i2c: add ACPI module device table

[Enric Balletbo i Serra]

From: Wei-Ning Huang <wnhuang@google.com>

Add ACPI module device table for matching cros-ec devices to load the
cros_ec_i2c driver automatically.

Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4:
- [7/8] Add Acked-by Lee Jones
- [7/8] Remove comma in terminator.

Changes in v3:
- [7/8] Add the Reviewed-by Andy Shevchenko.
- [7/8] Avoid commas in terminator entries.

Changes in v2:
- [7/8] Add the Reviewed-by Gwendal.

 drivers/mfd/cros_ec_dev.c |  2 +-
 drivers/mfd/cros_ec_i2c.c | 12 ++++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 1f889523885d..1d6dc5c7a19d 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -482,7 +482,7 @@ static void ec_device_shutdown(struct platform_device *pdev)
 
 static const struct platform_device_id cros_ec_id[] = {
 	{ DRV_NAME, 0 },
-	{ /* sentinel */ },
+	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(platform, cros_ec_id);
 
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 9f70de1e4c70..02a7bacdc056 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -13,6 +13,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -344,11 +345,13 @@ static int cros_ec_i2c_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
 			  cros_ec_i2c_resume);
 
+#ifdef CONFIG_OF
 static const struct of_device_id cros_ec_i2c_of_match[] = {
 	{ .compatible = "google,cros-ec-i2c", },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
+#endif
 
 static const struct i2c_device_id cros_ec_i2c_id[] = {
 	{ "cros-ec-i2c", 0 },
@@ -356,9 +359,18 @@ static const struct i2c_device_id cros_ec_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cros_ec_i2c_acpi_id[] = {
+	{ "GOOG0008", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, cros_ec_i2c_acpi_id);
+#endif
+
 static struct i2c_driver cros_ec_driver = {
 	.driver	= {
 		.name	= "cros-ec-i2c",
+		.acpi_match_table = ACPI_PTR(cros_ec_i2c_acpi_id),
 		.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
 		.pm	= &cros_ec_i2c_pm_ops,
 	},
-- 
2.17.0

[RESEND PATCH v5 7/7] mfd: cros_ec_i2c: moving the system sleep pm ops to late

[Enric Balletbo i Serra]

From: Joseph Lo <josephl@nvidia.com>

The cros_ec_i2c driver is still active after it had suspended or before it
resumes. Besides that, it also tried to transfer data even after the I2C
host had been suspended. This will lead the system to crash.

During the test, we also observe that the EC needs to be resumed earlier
due to some status polling from the EC FW (e.g. battery status). So we
move the PM ops to late stage to make it work normally.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes in v5: None
Changes in v4:
- [8/8] Add Acked-by Lee Jones.

Changes in v3:
- [8/8] Add static to cros_ec_i2c_pm_ops.
- [8/8] Add the Reviewed-by Andy Shevchenko.

Changes in v2:
- [8/8] This patch is new in this series replacing [5/6] of v1.

 drivers/mfd/cros_ec_i2c.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 02a7bacdc056..ef9b4763356f 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -342,8 +342,9 @@ static int cros_ec_i2c_resume(struct device *dev)
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
-			  cros_ec_i2c_resume);
+static const struct dev_pm_ops cros_ec_i2c_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(cros_ec_i2c_suspend, cros_ec_i2c_resume)
+};
 
 #ifdef CONFIG_OF
 static const struct of_device_id cros_ec_i2c_of_match[] = {
-- 
2.17.0

Re: [RESEND PATCH v5 0/7] mfd: cros_ec: add subdevices and fixes

[Lee Jones]

On Wed, 18 Apr 2018, Enric Balletbo i Serra wrote:

> Hi,
> 
> This is the five version of a patchset that collects some patches
> already send but that needed some rework due the patchset to split the
> cros_ec_devs modules in 2 parts. This patchset contains some improvements
> and also some fixes. They can be applied independently and I think that
> all can go through the MFD tree.
> 
> Note: In this RESEND I removed the patch
> 
> [PATCH v5 4/8] mfd: cros_ec_dev: Register cros-ec-rtc driver as a
>                subdevice
> 
> This patch needs some minor changes but actually I don't have the
> hardware to test it. The other patches has no dependency on this one,
> I'll send the above patch once I have the hardware to test again.
> 
> Best regards,
>  Enric

All applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog