* Re: Linux 4.9.148
2018-12-29 13:08 Linux 4.9.148 Greg KH
@ 2018-12-29 13:08 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2018-12-29 13:08 UTC (permalink / raw)
To: linux-kernel, Andrew Morton, torvalds, stable; +Cc: lwn, Jiri Slaby
diff --git a/Makefile b/Makefile
index 3cccc51a57ce..1b71b11ea63e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 9
-SUBLEVEL = 147
+SUBLEVEL = 148
EXTRAVERSION =
NAME = Roaring Lionus
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 6d9b45549109..d5b2a08e2b66 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -172,6 +172,8 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
struct mtrr_gentry gentry;
void __user *arg = (void __user *) __arg;
+ memset(&gentry, 0, sizeof(gentry));
+
switch (cmd) {
case MTRRIOC_ADD_ENTRY:
case MTRRIOC_SET_ENTRY:
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index ae52ef05d098..769831d9fd11 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -342,10 +342,10 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
sanitize_restored_xstate(tsk, &env, xfeatures, fx_only);
}
+ local_bh_disable();
fpu->fpstate_active = 1;
- preempt_disable();
fpu__restore(fpu);
- preempt_enable();
+ local_bh_enable();
return err;
} else {
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 46fe9248410d..af1d26f79878 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -63,10 +63,18 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
unsigned int req_sects;
sector_t end_sect, tmp;
- /* Make sure bi_size doesn't overflow */
- req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
+ /*
+ * Issue in chunks of the user defined max discard setting,
+ * ensuring that bi_size doesn't overflow
+ */
+ req_sects = min_t(sector_t, nr_sects,
+ q->limits.max_discard_sectors);
+ if (!req_sects)
+ goto fail;
+ if (req_sects > UINT_MAX >> 9)
+ req_sects = UINT_MAX >> 9;
- /**
+ /*
* If splitting a request, and the next starting sector would be
* misaligned, stop the discard at the previous aligned sector.
*/
@@ -100,6 +108,14 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
*biop = bio;
return 0;
+
+fail:
+ if (bio) {
+ submit_bio_wait(bio);
+ bio_put(bio);
+ }
+ *biop = NULL;
+ return -EOPNOTSUPP;
}
EXPORT_SYMBOL(__blkdev_issue_discard);
diff --git a/drivers/gpio/gpio-max7301.c b/drivers/gpio/gpio-max7301.c
index 05813fbf3daf..647dfbbc4e1c 100644
--- a/drivers/gpio/gpio-max7301.c
+++ b/drivers/gpio/gpio-max7301.c
@@ -25,7 +25,7 @@ static int max7301_spi_write(struct device *dev, unsigned int reg,
struct spi_device *spi = to_spi_device(dev);
u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
- return spi_write(spi, (const u8 *)&word, sizeof(word));
+ return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
}
/* A read from the MAX7301 means two transfers; here, one message each */
@@ -37,14 +37,8 @@ static int max7301_spi_read(struct device *dev, unsigned int reg)
struct spi_device *spi = to_spi_device(dev);
word = 0x8000 | (reg << 8);
- ret = spi_write(spi, (const u8 *)&word, sizeof(word));
- if (ret)
- return ret;
- /*
- * This relies on the fact, that a transfer with NULL tx_buf shifts out
- * zero bytes (=NOOP for MAX7301)
- */
- ret = spi_read(spi, (u8 *)&word, sizeof(word));
+ ret = spi_write_then_read(spi, &word, sizeof(word), &word,
+ sizeof(word));
if (ret)
return ret;
return word & 0xff;
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 71c3473476c7..04b26ca06180 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -36,6 +36,7 @@
#include <linux/pci.h>
#include <linux/export.h>
+#include <linux/nospec.h>
/**
* DOC: getunique and setversion story
@@ -668,13 +669,17 @@ long drm_ioctl(struct file *filp,
if (is_driver_ioctl) {
/* driver ioctl */
- if (nr - DRM_COMMAND_BASE >= dev->driver->num_ioctls)
+ unsigned int index = nr - DRM_COMMAND_BASE;
+
+ if (index >= dev->driver->num_ioctls)
goto err_i1;
- ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
+ index = array_index_nospec(index, dev->driver->num_ioctls);
+ ioctl = &dev->driver->ioctls[index];
} else {
/* core ioctl */
if (nr >= DRM_CORE_IOCTL_COUNT)
goto err_i1;
+ nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
ioctl = &drm_ioctls[nr];
}
@@ -770,6 +775,7 @@ bool drm_ioctl_flags(unsigned int nr, unsigned int *flags)
if (nr >= DRM_CORE_IOCTL_COUNT)
return false;
+ nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
*flags = drm_ioctls[nr].flags;
return true;
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 0276d2ef06ee..9a0d0d0ad6d0 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -317,6 +317,8 @@ static ssize_t out_intr_mask_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_interrupt_mask);
}
@@ -330,6 +332,8 @@ static ssize_t out_read_index_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_read_index);
}
@@ -344,6 +348,8 @@ static ssize_t out_write_index_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_write_index);
}
@@ -358,6 +364,8 @@ static ssize_t out_read_bytes_avail_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.bytes_avail_toread);
}
@@ -372,6 +380,8 @@ static ssize_t out_write_bytes_avail_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.bytes_avail_towrite);
}
@@ -385,6 +395,8 @@ static ssize_t in_intr_mask_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_interrupt_mask);
}
@@ -398,6 +410,8 @@ static ssize_t in_read_index_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_read_index);
}
@@ -411,6 +425,8 @@ static ssize_t in_write_index_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_write_index);
}
@@ -425,6 +441,8 @@ static ssize_t in_read_bytes_avail_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.bytes_avail_toread);
}
@@ -439,6 +457,8 @@ static ssize_t in_write_bytes_avail_show(struct device *dev,
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.bytes_avail_towrite);
}
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index fe7c6ec67d98..2a44a2c3e859 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1763,8 +1763,8 @@ static void __srpt_close_all_ch(struct srpt_device *sdev)
list_for_each_entry(ch, &sdev->rch_list, list) {
if (srpt_disconnect_ch(ch) >= 0)
- pr_info("Closing channel %s-%d because target %s has been disabled\n",
- ch->sess_name, ch->qp->qp_num,
+ pr_info("Closing channel %s because target %s has been disabled\n",
+ ch->sess_name,
sdev->device->name);
srpt_close_ch(ch);
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 0c6de9f12ee8..97e51309d7af 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -27,6 +27,7 @@
#include "sd_ops.h"
#define DEFAULT_CMD6_TIMEOUT_MS 500
+#define MIN_CACHE_EN_TIMEOUT_MS 1600
static const unsigned int tran_exp[] = {
10000, 100000, 1000000, 10000000,
@@ -522,8 +523,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->cid.year += 16;
/* check whether the eMMC card supports BKOPS */
- if (!mmc_card_broken_hpi(card) &&
- ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
+ if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
card->ext_csd.bkops = 1;
card->ext_csd.man_bkops_en =
(ext_csd[EXT_CSD_BKOPS_EN] &
@@ -1719,20 +1719,26 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err) {
pr_warn("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
+ card->ext_csd.hpi_en = 0;
err = 0;
- } else
+ } else {
card->ext_csd.hpi_en = 1;
+ }
}
/*
- * If cache size is higher than 0, this indicates
- * the existence of cache and it can be turned on.
+ * If cache size is higher than 0, this indicates the existence of cache
+ * and it can be turned on. Note that some eMMCs from Micron has been
+ * reported to need ~800 ms timeout, while enabling the cache after
+ * sudden power failure tests. Let's extend the timeout to a minimum of
+ * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards.
*/
- if (!mmc_card_broken_hpi(card) &&
- card->ext_csd.cache_size > 0) {
+ if (card->ext_csd.cache_size > 0) {
+ unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS;
+
+ timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_CACHE_CTRL, 1,
- card->ext_csd.generic_cmd6_time);
+ EXT_CSD_CACHE_CTRL, 1, timeout_ms);
if (err && err != -EBADMSG)
goto free_card;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f7d1c8c4e5ad..009242bcc7be 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2105,7 +2105,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
- mmc->max_seg_size = mmc->max_req_size;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
@@ -2135,6 +2134,17 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
goto err_irq;
}
+ /*
+ * Limit the maximum segment size to the lower of the request size
+ * and the DMA engine device segment size limits. In reality, with
+ * 32-bit transfers, the DMA engine can do longer segments than this
+ * but there is no way to represent that in the DMA model - if we
+ * increase this figure here, we get warnings from the DMA API debug.
+ */
+ mmc->max_seg_size = min3(mmc->max_req_size,
+ dma_get_max_seg_size(host->rx_chan->device->dev),
+ dma_get_max_seg_size(host->tx_chan->device->dev));
+
/* Request IRQ for MMC operations */
ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
mmc_hostname(mmc), host);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index e7b516342678..66ae647b712e 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2808,6 +2808,12 @@ static int hso_get_config_data(struct usb_interface *interface)
return -EIO;
}
+ /* check if we have a valid interface */
+ if (if_num > 16) {
+ kfree(config_data);
+ return -EINVAL;
+ }
+
switch (config_data[if_num]) {
case 0x0:
result = 0;
@@ -2878,10 +2884,18 @@ static int hso_probe(struct usb_interface *interface,
/* Get the interface/port specification from either driver_info or from
* the device itself */
- if (id->driver_info)
+ if (id->driver_info) {
+ /* if_num is controlled by the device, driver_info is a 0 terminated
+ * array. Make sure, the access is in bounds! */
+ for (i = 0; i <= if_num; ++i)
+ if (((u32 *)(id->driver_info))[i] == 0)
+ goto exit;
port_spec = ((u32 *)(id->driver_info))[if_num];
- else
+ } else {
port_spec = hso_get_config_data(interface);
+ if (port_spec < 0)
+ goto exit;
+ }
/* Check if we need to switch to alt interfaces prior to port
* configuration */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 00d10660ff14..39e2d3271035 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1353,7 +1353,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
portsc_buf[port_index] = 0;
/* Bail out if a USB3 port has a new device in link training */
- if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+ if ((hcd->speed >= HCD_USB3) &&
+ (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
bus_state->bus_suspended = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2b81939fecd7..1e3445dd84b2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1163,6 +1163,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
@@ -1327,6 +1331,7 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) }, /* GosunCn ZTE WeLink ME3630 (MBIM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
@@ -1530,6 +1535,7 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(2) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */
.driver_info = RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1757,6 +1763,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
.driver_info = RSVD(5) | RSVD(6) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
@@ -1941,7 +1948,14 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) }, /* HP lt4132 (Huawei ME906s-158) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+ { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */
+ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 46cd2e1b055b..1999e85840d5 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -466,7 +466,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
inode = new_inode(sb);
if (!inode)
- goto out;
+ return ERR_PTR(-ENOMEM);
inode->i_ino = get_next_ino();
@@ -476,8 +476,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
if (unlikely(head->unregistering)) {
spin_unlock(&sysctl_lock);
iput(inode);
- inode = NULL;
- goto out;
+ return ERR_PTR(-ENOENT);
}
ei->sysctl = head;
ei->sysctl_entry = table;
@@ -502,7 +501,6 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
if (root->set_ownership)
root->set_ownership(head, table, &inode->i_uid, &inode->i_gid);
-out:
return inode;
}
@@ -551,10 +549,11 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
goto out;
}
- err = ERR_PTR(-ENOMEM);
inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
- if (!inode)
+ if (IS_ERR(inode)) {
+ err = ERR_CAST(inode);
goto out;
+ }
err = NULL;
d_set_d_op(dentry, &proc_sys_dentry_operations);
@@ -687,7 +686,7 @@ static bool proc_sys_fill_cache(struct file *file,
return false;
if (d_in_lookup(child)) {
inode = proc_sys_make_inode(dir->d_sb, head, table);
- if (!inode) {
+ if (IS_ERR(inode)) {
d_lookup_done(child);
dput(child);
return false;
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index fb0f44cd1e28..de7799a0a9d1 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -209,6 +209,38 @@ static int trun_remove_range(struct ubifs_info *c, struct replay_entry *r)
return ubifs_tnc_remove_range(c, &min_key, &max_key);
}
+/**
+ * inode_still_linked - check whether inode in question will be re-linked.
+ * @c: UBIFS file-system description object
+ * @rino: replay entry to test
+ *
+ * O_TMPFILE files can be re-linked, this means link count goes from 0 to 1.
+ * This case needs special care, otherwise all references to the inode will
+ * be removed upon the first replay entry of an inode with link count 0
+ * is found.
+ */
+static bool inode_still_linked(struct ubifs_info *c, struct replay_entry *rino)
+{
+ struct replay_entry *r;
+
+ ubifs_assert(rino->deletion);
+ ubifs_assert(key_type(c, &rino->key) == UBIFS_INO_KEY);
+
+ /*
+ * Find the most recent entry for the inode behind @rino and check
+ * whether it is a deletion.
+ */
+ list_for_each_entry_reverse(r, &c->replay_list, list) {
+ ubifs_assert(r->sqnum >= rino->sqnum);
+ if (key_inum(c, &r->key) == key_inum(c, &rino->key))
+ return r->deletion == 0;
+
+ }
+
+ ubifs_assert(0);
+ return false;
+}
+
/**
* apply_replay_entry - apply a replay entry to the TNC.
* @c: UBIFS file-system description object
@@ -239,6 +271,11 @@ static int apply_replay_entry(struct ubifs_info *c, struct replay_entry *r)
{
ino_t inum = key_inum(c, &r->key);
+ if (inode_still_linked(c, r)) {
+ err = 0;
+ break;
+ }
+
err = ubifs_tnc_remove_ino(c, inum);
break;
}
diff --git a/kernel/panic.c b/kernel/panic.c
index dbec387099b1..eb7bc6d60927 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -13,6 +13,7 @@
#include <linux/kmsg_dump.h>
#include <linux/kallsyms.h>
#include <linux/notifier.h>
+#include <linux/vt_kern.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/ftrace.h>
@@ -228,7 +229,10 @@ void panic(const char *fmt, ...)
if (_crash_kexec_post_notifiers)
__crash_kexec(NULL);
- bust_spinlocks(0);
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ console_unblank();
/*
* We may have ended up stopping the CPU holding the lock (in
^ permalink raw reply related [flat|nested] 2+ messages in thread