[PATCH v2 1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*

[PATCH v2 1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*

[Shunyong Yang]

In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
to check the ACK status. As hidma reuses the descriptor in a free list
when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
if the descriptor has been used before. This will cause a BUG_ON in
async_tx_quiesce().

  kernel BUG at crypto/async_tx/async_tx.c:282!
  Internal error: Oops - BUG: 0 1 SMP
  ...
  task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
  PC is at async_tx_quiesce+0x54/0x78 [async_tx]
  LR is at async_trigger_callback+0x98/0x110 [async_tx]

This patch initializes flags in dma_async_tx_descriptor by the flags
passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
---

v2: add Reviewed-by: Sinan Kaya <okaya@kernel.org>

---
 drivers/dma/qcom/hidma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 43d4b00b8138..9d639ed1955a 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -415,6 +415,7 @@ static int hidma_alloc_chan_resources(struct dma_chan *dmach)
 	if (!mdesc)
 		return NULL;
 
+	mdesc->desc.flags = flags;
 	hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
 				     src, dest, len, flags,
 				     HIDMA_TRE_MEMCPY);
@@ -447,6 +448,7 @@ static int hidma_alloc_chan_resources(struct dma_chan *dmach)
 	if (!mdesc)
 		return NULL;
 
+	mdesc->desc.flags = flags;
 	hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
 				     value, dest, len, flags,
 				     HIDMA_TRE_MEMSET);
-- 
1.8.3.1

[PATCH v2 2/2] dmaengine: qcom_hidma: assign channel cookie correctly

[Shunyong Yang]

When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().

 Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
 transaction
 ...
 Call trace:
 [<ffff000008089994>] dump_backtrace+0x0/0x1f4
 [<ffff000008089bac>] show_stack+0x24/0x2c
 [<ffff00000891e198>] dump_stack+0x84/0xa8
 [<ffff0000080da544>] panic+0x12c/0x29c
 [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
 [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
 [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
 [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
 [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
 [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
 [<ffff000008736538>] md_thread+0x108/0x168
 [<ffff0000080fb1cc>] kthread+0x10c/0x138
 [<ffff000008084d34>] ret_from_fork+0x10/0x18

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
---
v2:
  fix missing brace according to Vinod's feedback.
  add Reviewed-by: Sinan Kaya <okaya@kernel.org>.
---
 drivers/dma/qcom/hidma.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 9d639ed1955a..411f91fde734 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -138,24 +138,25 @@ static void hidma_process_completed(struct hidma_chan *mchan)
 		desc = &mdesc->desc;
 		last_cookie = desc->cookie;
 
+		llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+
 		spin_lock_irqsave(&mchan->lock, irqflags);
+		if (llstat == DMA_COMPLETE) {
+			mchan->last_success = last_cookie;
+			result.result = DMA_TRANS_NOERROR;
+		} else {
+			result.result = DMA_TRANS_ABORTED;
+		}
+
 		dma_cookie_complete(desc);
 		spin_unlock_irqrestore(&mchan->lock, irqflags);
 
-		llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
 		dmaengine_desc_get_callback(desc, &cb);
 
 		dma_run_dependencies(desc);
 
 		spin_lock_irqsave(&mchan->lock, irqflags);
 		list_move(&mdesc->node, &mchan->free);
-
-		if (llstat == DMA_COMPLETE) {
-			mchan->last_success = last_cookie;
-			result.result = DMA_TRANS_NOERROR;
-		} else
-			result.result = DMA_TRANS_ABORTED;
-
 		spin_unlock_irqrestore(&mchan->lock, irqflags);
 
 		dmaengine_desc_callback_invoke(&cb, &result);
-- 
1.8.3.1

Re: [PATCH v2 1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*

[Vinod Koul]

On 07-01-19, 09:32, Shunyong Yang wrote:
> In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
> to check the ACK status. As hidma reuses the descriptor in a free list
> when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
> if the descriptor has been used before. This will cause a BUG_ON in
> async_tx_quiesce().
> 
>   kernel BUG at crypto/async_tx/async_tx.c:282!
>   Internal error: Oops - BUG: 0 1 SMP
>   ...
>   task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
>   PC is at async_tx_quiesce+0x54/0x78 [async_tx]
>   LR is at async_trigger_callback+0x98/0x110 [async_tx]
> 
> This patch initializes flags in dma_async_tx_descriptor by the flags
> passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.

Applied both, thanks

-- 
~Vinod