From: Stefan Mavrodiev <stefan@olimex.com>
To: Heiko Stuebner <heiko@sntech.de>,
Lee Jones <lee.jones@linaro.org>,
linux-kernel@vger.kernel.org
Cc: Stefan Mavrodiev <stefan@olimex.com>
Subject: [PATCH v3 1/2] mfd: rk808: Check pm_power_off pointer
Date: Fri, 7 Jun 2019 15:42:25 +0300 [thread overview]
Message-ID: <20190607124226.17694-2-stefan@olimex.com> (raw)
In-Reply-To: <20190607124226.17694-1-stefan@olimex.com>
The function pointer pm_power_off may point to function from other
module (PSCI for example). If rk808 is removed, pm_power_off is
overwritten to NULL and the system cannot be powered off.
This patch checks if pm_power_off points to a module function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
Changes is v3:
- Add explanation comments
Changes in v2:
- Initial release actually
drivers/mfd/rk808.c | 17 +++++++++++------
include/linux/mfd/rk808.h | 1 +
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 94377782d208..46d26e141cc4 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -438,7 +438,6 @@ static int rk808_probe(struct i2c_client *client,
struct rk808 *rk808;
const struct rk808_reg_data *pre_init_reg;
const struct mfd_cell *cells;
- void (*pm_pwroff_fn)(void);
int nr_pre_init_regs;
int nr_cells;
int pm_off = 0, msb, lsb;
@@ -475,7 +474,7 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
- pm_pwroff_fn = rk805_device_shutdown;
+ rk808->pm_pwroff_fn = rk805_device_shutdown;
break;
case RK808_ID:
rk808->regmap_cfg = &rk808_regmap_config;
@@ -484,7 +483,7 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
cells = rk808s;
nr_cells = ARRAY_SIZE(rk808s);
- pm_pwroff_fn = rk808_device_shutdown;
+ rk808->pm_pwroff_fn = rk808_device_shutdown;
break;
case RK818_ID:
rk808->regmap_cfg = &rk818_regmap_config;
@@ -493,7 +492,7 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
cells = rk818s;
nr_cells = ARRAY_SIZE(rk818s);
- pm_pwroff_fn = rk818_device_shutdown;
+ rk808->pm_pwroff_fn = rk818_device_shutdown;
break;
default:
dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
@@ -548,7 +547,7 @@ static int rk808_probe(struct i2c_client *client,
"rockchip,system-power-controller");
if (pm_off && !pm_power_off) {
rk808_i2c_client = client;
- pm_power_off = pm_pwroff_fn;
+ pm_power_off = rk808->pm_pwroff_fn;
}
return 0;
@@ -563,7 +562,13 @@ static int rk808_remove(struct i2c_client *client)
struct rk808 *rk808 = i2c_get_clientdata(client);
regmap_del_irq_chip(client->irq, rk808->irq_data);
- pm_power_off = NULL;
+
+ /**
+ * pm_power_off may points to a function from another module.
+ * Check if the pointer is set by us and only then overwrite it.
+ */
+ if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn)
+ pm_power_off = NULL;
return 0;
}
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index d3156594674c..8b5d68a7bb9c 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -453,5 +453,6 @@ struct rk808 {
long variant;
const struct regmap_config *regmap_cfg;
const struct regmap_irq_chip *regmap_irq_chip;
+ void (*pm_pwroff_fn)(void);
};
#endif /* __LINUX_REGULATOR_RK808_H */
--
2.17.1
next prev parent reply other threads:[~2019-06-07 12:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-07 12:42 [PATCH v3 0/2] mfd: rk808: Fix pointers and poweroff Stefan Mavrodiev
2019-06-07 12:42 ` Stefan Mavrodiev [this message]
2019-06-12 9:41 ` [PATCH v3 1/2] mfd: rk808: Check pm_power_off pointer Lee Jones
2019-06-07 12:42 ` [PATCH v3 2/2] mfd: rk808: Prepare rk805 for poweroff Stefan Mavrodiev
2019-06-12 9:41 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190607124226.17694-2-stefan@olimex.com \
--to=stefan@olimex.com \
--cc=heiko@sntech.de \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox