[PATCH AUTOSEL 4.14 01/31] Staging: vc04_services: Fix a couple error codes

[PATCH AUTOSEL 4.14 01/31] Staging: vc04_services: Fix a couple error codes

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ca4e4efbefbbdde0a7bb3023ea08d491f4daf9b9 ]

These are accidentally returning positive EINVAL instead of negative
-EINVAL.  Some of the callers treat positive values as success.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/controls.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index 77a5d6f4e1eb..8a242f609d3b 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -579,7 +579,7 @@ static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev,
 				dev->colourfx.enable ? "true" : "false",
 				dev->colourfx.u, dev->colourfx.v,
 				ret, (ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
@@ -603,7 +603,7 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
 		 "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
 			__func__, mmal_ctrl, ctrl->id, ctrl->val, ret,
 			(ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
-- 
2.20.1

[PATCH AUTOSEL 4.14 02/31] perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit 23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/ds.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 25386be0d757..3310f9f6c3e1 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -681,7 +681,7 @@ struct event_constraint intel_core2_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	EVENT_CONSTRAINT_END
 };
 
@@ -690,7 +690,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -698,7 +698,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 
 struct event_constraint intel_slm_pebs_event_constraints[] = {
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x1),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -729,7 +729,7 @@ struct event_constraint intel_nehalem_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -746,7 +746,7 @@ struct event_constraint intel_westmere_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -755,7 +755,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
         INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -770,9 +770,9 @@ struct event_constraint intel_ivb_pebs_event_constraints[] = {
         INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -786,9 +786,9 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -809,9 +809,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -832,9 +832,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 struct event_constraint intel_skl_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	INTEL_PLD_CONSTRAINT(0x1cd, 0xf),		      /* MEM_TRANS_RETIRED.* */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
-- 
2.20.1

[PATCH AUTOSEL 4.14 03/31] netfilter: nf_queue: fix reinject verdict handling

[Sasha Levin]

From: Jagdish Motwani <jagdish.motwani@sophos.com>

[ Upstream commit 946c0d8e6ed43dae6527e878d0077c1e11015db0 ]

This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.

Fixes: 960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_queue.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index f7e21953b1de..8260b1e73bbd 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -193,6 +193,7 @@ static unsigned int nf_iterate(struct sk_buff *skb,
 repeat:
 		verdict = nf_hook_entry_hookfn(hook, skb, state);
 		if (verdict != NF_ACCEPT) {
+			*index = i;
 			if (verdict != NF_REPEAT)
 				return verdict;
 			goto repeat;
-- 
2.20.1

[PATCH AUTOSEL 4.14 04/31] ipvs: Fix use-after-free in ip_vs_in

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 719c7d563c17b150877cee03a4b812a424989dfa ]

BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603

CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6a/0x270
 kasan_report+0x179/0x2c0
 ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
 ip_vs_in+0xd8/0x170 [ip_vs]
 nf_hook_slow+0x5f/0xe0
 __ip_local_out+0x1d5/0x250
 ip_local_out+0x19/0x60
 __tcp_transmit_skb+0xba1/0x14f0
 tcp_write_xmit+0x41f/0x1ed0
 ? _copy_from_iter_full+0xca/0x340
 __tcp_push_pending_frames+0x52/0x140
 tcp_sendmsg_locked+0x787/0x1600
 ? tcp_sendpage+0x60/0x60
 ? inet_sk_set_state+0xb0/0xb0
 tcp_sendmsg+0x27/0x40
 sock_sendmsg+0x6d/0x80
 sock_write_iter+0x121/0x1c0
 ? sock_sendmsg+0x80/0x80
 __vfs_write+0x23e/0x370
 vfs_write+0xe7/0x230
 ksys_write+0xa1/0x120
 ? __ia32_sys_read+0x50/0x50
 ? __audit_syscall_exit+0x3ce/0x450
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60
RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003
RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74
R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0

Allocated by task 6052:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x10a/0x220
 ops_init+0x97/0x190
 register_pernet_operations+0x1ac/0x360
 register_pernet_subsys+0x24/0x40
 0xffffffffc0ea016d
 do_one_initcall+0x8b/0x253
 do_init_module+0xe3/0x335
 load_module+0x2fc0/0x3890
 __do_sys_finit_module+0x192/0x1c0
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6067:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1a0
 ops_free_list.part.7+0xa6/0xc0
 unregister_pernet_operations+0x18b/0x1f0
 unregister_pernet_subsys+0x1d/0x30
 ip_vs_cleanup+0x1d/0xd2f [ip_vs]
 __x64_sys_delete_module+0x20c/0x300
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600)
The buggy address belongs to the page:
page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.

Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.

This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(),  where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index d1c0378144f3..ee97ce176b9a 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2268,7 +2268,6 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ip_vs_service_net_cleanup(ipvs);	/* ip_vs_flush() with locks */
 	ip_vs_conn_net_cleanup(ipvs);
 	ip_vs_app_net_cleanup(ipvs);
@@ -2283,6 +2282,7 @@ static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 	EnterFunction(2);
+	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ipvs->enable = 0;	/* Disable packet reception */
 	smp_wmb();
 	ip_vs_sync_net_cleanup(ipvs);
-- 
2.20.1

[PATCH AUTOSEL 4.14 05/31] selftests: netfilter: missing error check when setting up veth interface

[Sasha Levin]

From: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

[ Upstream commit 82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 8ec76681605c..f25f72a75cf3 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -23,7 +23,11 @@ ip netns add ns0
 ip netns add ns1
 ip netns add ns2
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
 ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
 
 ip -net ns0 link set lo up
-- 
2.20.1

[PATCH AUTOSEL 4.14 06/31] clk: ti: clkctrl: Fix clkdm_clk handling

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 1cc54078d104f5b4d7e9f8d55362efa5a8daffdb ]

We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.

Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 53e71d0503ec..82e4d5cccf84 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -124,9 +124,6 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 	int ret;
 	union omap4_timeout timeout = { 0 };
 
-	if (!clk->enable_bit)
-		return 0;
-
 	if (clk->clkdm) {
 		ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
 		if (ret) {
@@ -138,6 +135,9 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 		}
 	}
 
+	if (!clk->enable_bit)
+		return 0;
+
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
 	val &= ~OMAP4_MODULEMODE_MASK;
@@ -166,7 +166,7 @@ static void _omap4_clkctrl_clk_disable(struct clk_hw *hw)
 	union omap4_timeout timeout = { 0 };
 
 	if (!clk->enable_bit)
-		return;
+		goto exit;
 
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 07/31] powerpc/powernv: Return for invalid IMC domain

[Sasha Levin]

From: Anju T Sudhakar <anju@linux.vnet.ibm.com>

[ Upstream commit b59bd3527fe3c1939340df558d7f9d568fc9f882 ]

Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.

For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:

  IMC Unknown Device type
  IMC PMU (null) Register failed

To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 6914b289c86b..7b93191dc2e3 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -87,6 +87,10 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 	struct imc_pmu *pmu_ptr;
 	u32 offset;
 
+	/* Return for unknown domain */
+	if (domain < 0)
+		return -EINVAL;
+
 	/* memory for pmu */
 	pmu_ptr = kzalloc(sizeof(struct imc_pmu), GFP_KERNEL);
 	if (!pmu_ptr)
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/31] mISDN: make sure device name is NUL terminated

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 65cb4aac8dce..477e07036add 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -394,7 +394,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -678,7 +678,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -692,6 +692,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
-- 
2.20.1

[PATCH AUTOSEL 4.14 09/31] x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

[Sasha Levin]

From: Frank van der Linden <fllinden@amazon.com>

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.

Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index ecf82859f1c0..bbebcd7a781e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -792,8 +792,11 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
 
-	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
-	if (!cpu_has(c, X86_FEATURE_CPB))
+	/*
+	 * Fix erratum 1076: CPB feature bit not being set in CPUID.
+	 * Always set it, except when running under a hypervisor.
+	 */
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 10/31] perf/ring_buffer: Fix exposing a temporarily decreased data_head

[Sasha Levin]

From: Yabin Cui <yabinc@google.com>

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 489dc6b60053..fde853270c09 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -52,11 +52,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	head = local_read(&rb->head);
 
 	/*
-	 * IRQ/NMI can happen here, which means we can miss a head update.
+	 * IRQ/NMI can happen here and advance @rb->head, causing our
+	 * load above to be stale.
 	 */
 
-	if (!local_dec_and_test(&rb->nest))
+	/*
+	 * If this isn't the outermost nesting, we don't have to update
+	 * @rb->user_page->data_head.
+	 */
+	if (local_read(&rb->nest) > 1) {
+		local_dec(&rb->nest);
 		goto out;
+	}
 
 	/*
 	 * Since the mmap() consumer (userspace) can run on a different CPU:
@@ -88,9 +95,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update -- rely on previous implied
-	 * compiler barriers to force a re-read.
+	 * We must publish the head before decrementing the nest count,
+	 * otherwise an IRQ/NMI can publish a more recent head value and our
+	 * write will (temporarily) publish a stale value.
+	 */
+	barrier();
+	local_set(&rb->nest, 0);
+
+	/*
+	 * Ensure we decrement @rb->nest before we validate the @rb->head.
+	 * Otherwise we cannot be sure we caught the 'last' nested update.
 	 */
+	barrier();
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
 		goto again;
-- 
2.20.1

[PATCH AUTOSEL 4.14 11/31] perf/ring_buffer: Add ordering to rb->nest increment

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index fde853270c09..aef2af80a927 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -49,6 +49,15 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	unsigned long head;
 
 again:
+	/*
+	 * In order to avoid publishing a head value that goes backwards,
+	 * we must ensure the load of @rb->head happens after we've
+	 * incremented @rb->nest.
+	 *
+	 * Otherwise we can observe a @rb->head value before one published
+	 * by an IRQ/NMI happening between the load and the increment.
+	 */
+	barrier();
 	head = local_read(&rb->head);
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 4.14 12/31] perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 4d839dd9e4356bbacf3eb0ab13a549b83b008c21 ]

We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: 7b732a750477 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index aef2af80a927..f3a69a4f0d57 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -101,7 +101,7 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	 * See perf_output_begin().
 	 */
 	smp_wmb(); /* B, matches C */
-	rb->user_page->data_head = head;
+	WRITE_ONCE(rb->user_page->data_head, head);
 
 	/*
 	 * We must publish the head before decrementing the nest count,
@@ -489,7 +489,7 @@ void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size)
 		                     handle->aux_flags);
 	}
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb))
 		wakeup = true;
 
@@ -520,7 +520,7 @@ int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size)
 
 	rb->aux_head += size;
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb)) {
 		perf_output_wakeup(handle);
 		handle->wakeup = rb->aux_wakeup + rb->aux_watermark;
-- 
2.20.1

[PATCH AUTOSEL 4.14 13/31] gpio: fix gpio-adp5588 build errors

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3f80f167ed56..2357d2f73c1a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -712,6 +712,7 @@ config GPIO_ADP5588
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
 	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
-- 
2.20.1

[PATCH AUTOSEL 4.14 14/31] net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 0affee9c8aa2..0b1e7a96ff49 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -2108,7 +2108,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
-- 
2.20.1

[PATCH AUTOSEL 4.14 15/31] PCI: PM: Avoid possible suspend-to-idle issue

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit d491f2b75237ef37d8867830ab7fad8d9659e853 ]

If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle.  However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.

To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0.  Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.

Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-driver.c | 17 ++++++++++++++++-
 include/linux/pci.h      |  1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index ea69b4dbab66..f5d66335fe53 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -726,6 +726,8 @@ static int pci_pm_suspend(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
+	pci_dev->skip_bus_pm = false;
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_SUSPEND);
 
@@ -799,7 +801,20 @@ static int pci_pm_suspend_noirq(struct device *dev)
 		}
 	}
 
-	if (!pci_dev->state_saved) {
+	if (pci_dev->skip_bus_pm) {
+		/*
+		 * The function is running for the second time in a row without
+		 * going through full resume, which is possible only during
+		 * suspend-to-idle in a spurious wakeup case.  Moreover, the
+		 * device was originally left in D0, so its power state should
+		 * not be changed here and the device register values saved
+		 * originally should be restored on resume again.
+		 */
+		pci_dev->state_saved = true;
+	} else if (pci_dev->state_saved) {
+		if (pci_dev->current_state == PCI_D0)
+			pci_dev->skip_bus_pm = true;
+	} else {
 		pci_save_state(pci_dev);
 		if (pci_power_manageable(pci_dev))
 			pci_prepare_to_sleep(pci_dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 59f4d10568c6..430f3c335446 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -346,6 +346,7 @@ struct pci_dev {
 						   D3cold, not set for devices
 						   powered on/off by the
 						   corresponding bridge */
+	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
 	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
 	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
 						      controlled exclusively by
-- 
2.20.1

Re: [PATCH AUTOSEL 4.14 15/31] PCI: PM: Avoid possible suspend-to-idle issue

[Rafael J. Wysocki]

On 6/8/2019 1:46 PM, Sasha Levin wrote:
> From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
>
> [ Upstream commit d491f2b75237ef37d8867830ab7fad8d9659e853 ]
>
> If a PCI driver leaves the device handled by it in D0 and calls
> pci_save_state() on the device in its ->suspend() or ->suspend_late()
> callback, it can expect the device to stay in D0 over the whole
> s2idle cycle.  However, that may not be the case if there is a
> spurious wakeup while the system is suspended, because in that case
> pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
> which calls pci_restore_state(), via pci_pm_default_resume_early(),
> so state_saved is cleared and the second iteration of
> pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
> may change the power state of the device.
>
> To avoid that, add a new internal flag, skip_bus_pm, that will be set
> by pci_pm_suspend_noirq() when it runs for the first time during the
> given system suspend-resume cycle if the state of the device has
> been saved already and the device is still in D0.  Setting that flag
> will cause the next iterations of pci_pm_suspend_noirq() to set
> state_saved for pci_pm_resume_noirq(), so that it always restores the
> device state from the originally saved data, and avoid calling
> pci_prepare_to_sleep() for the device.
>
> Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Reviewed-by: Keith Busch <keith.busch@intel.com>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/pci/pci-driver.c | 17 ++++++++++++++++-
>   include/linux/pci.h      |  1 +
>   2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index ea69b4dbab66..f5d66335fe53 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -726,6 +726,8 @@ static int pci_pm_suspend(struct device *dev)
>   	struct pci_dev *pci_dev = to_pci_dev(dev);
>   	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>   
> +	pci_dev->skip_bus_pm = false;
> +
>   	if (pci_has_legacy_pm_support(pci_dev))
>   		return pci_legacy_suspend(dev, PMSG_SUSPEND);
>   
> @@ -799,7 +801,20 @@ static int pci_pm_suspend_noirq(struct device *dev)
>   		}
>   	}
>   
> -	if (!pci_dev->state_saved) {
> +	if (pci_dev->skip_bus_pm) {
> +		/*
> +		 * The function is running for the second time in a row without
> +		 * going through full resume, which is possible only during
> +		 * suspend-to-idle in a spurious wakeup case.  Moreover, the
> +		 * device was originally left in D0, so its power state should
> +		 * not be changed here and the device register values saved
> +		 * originally should be restored on resume again.
> +		 */
> +		pci_dev->state_saved = true;
> +	} else if (pci_dev->state_saved) {
> +		if (pci_dev->current_state == PCI_D0)
> +			pci_dev->skip_bus_pm = true;
> +	} else {
>   		pci_save_state(pci_dev);
>   		if (pci_power_manageable(pci_dev))
>   			pci_prepare_to_sleep(pci_dev);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 59f4d10568c6..430f3c335446 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -346,6 +346,7 @@ struct pci_dev {
>   						   D3cold, not set for devices
>   						   powered on/off by the
>   						   corresponding bridge */
> +	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
>   	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
>   	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
>   						      controlled exclusively by

This has been reported to be problematic, I wouldn't recommend taking it 
for -stable at this point.

Re: [PATCH AUTOSEL 4.14 15/31] PCI: PM: Avoid possible suspend-to-idle issue

[Sasha Levin]

On Tue, Jun 11, 2019 at 05:25:48PM +0200, Rafael J. Wysocki wrote:
>On 6/8/2019 1:46 PM, Sasha Levin wrote:
>>From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
>>
>>[ Upstream commit d491f2b75237ef37d8867830ab7fad8d9659e853 ]
>>
>>If a PCI driver leaves the device handled by it in D0 and calls
>>pci_save_state() on the device in its ->suspend() or ->suspend_late()
>>callback, it can expect the device to stay in D0 over the whole
>>s2idle cycle.  However, that may not be the case if there is a
>>spurious wakeup while the system is suspended, because in that case
>>pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
>>which calls pci_restore_state(), via pci_pm_default_resume_early(),
>>so state_saved is cleared and the second iteration of
>>pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
>>may change the power state of the device.
>>
>>To avoid that, add a new internal flag, skip_bus_pm, that will be set
>>by pci_pm_suspend_noirq() when it runs for the first time during the
>>given system suspend-resume cycle if the state of the device has
>>been saved already and the device is still in D0.  Setting that flag
>>will cause the next iterations of pci_pm_suspend_noirq() to set
>>state_saved for pci_pm_resume_noirq(), so that it always restores the
>>device state from the originally saved data, and avoid calling
>>pci_prepare_to_sleep() for the device.
>>
>>Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
>>Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>Reviewed-by: Keith Busch <keith.busch@intel.com>
>>Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>---
>>  drivers/pci/pci-driver.c | 17 ++++++++++++++++-
>>  include/linux/pci.h      |  1 +
>>  2 files changed, 17 insertions(+), 1 deletion(-)
>>
>>diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
>>index ea69b4dbab66..f5d66335fe53 100644
>>--- a/drivers/pci/pci-driver.c
>>+++ b/drivers/pci/pci-driver.c
>>@@ -726,6 +726,8 @@ static int pci_pm_suspend(struct device *dev)
>>  	struct pci_dev *pci_dev = to_pci_dev(dev);
>>  	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>>+	pci_dev->skip_bus_pm = false;
>>+
>>  	if (pci_has_legacy_pm_support(pci_dev))
>>  		return pci_legacy_suspend(dev, PMSG_SUSPEND);
>>@@ -799,7 +801,20 @@ static int pci_pm_suspend_noirq(struct device *dev)
>>  		}
>>  	}
>>-	if (!pci_dev->state_saved) {
>>+	if (pci_dev->skip_bus_pm) {
>>+		/*
>>+		 * The function is running for the second time in a row without
>>+		 * going through full resume, which is possible only during
>>+		 * suspend-to-idle in a spurious wakeup case.  Moreover, the
>>+		 * device was originally left in D0, so its power state should
>>+		 * not be changed here and the device register values saved
>>+		 * originally should be restored on resume again.
>>+		 */
>>+		pci_dev->state_saved = true;
>>+	} else if (pci_dev->state_saved) {
>>+		if (pci_dev->current_state == PCI_D0)
>>+			pci_dev->skip_bus_pm = true;
>>+	} else {
>>  		pci_save_state(pci_dev);
>>  		if (pci_power_manageable(pci_dev))
>>  			pci_prepare_to_sleep(pci_dev);
>>diff --git a/include/linux/pci.h b/include/linux/pci.h
>>index 59f4d10568c6..430f3c335446 100644
>>--- a/include/linux/pci.h
>>+++ b/include/linux/pci.h
>>@@ -346,6 +346,7 @@ struct pci_dev {
>>  						   D3cold, not set for devices
>>  						   powered on/off by the
>>  						   corresponding bridge */
>>+	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
>>  	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
>>  	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
>>  						      controlled exclusively by
>
>This has been reported to be problematic, I wouldn't recommend taking 
>it for -stable at this point.

I've dropped it, thank you.

--
Thanks,
Sasha

[PATCH AUTOSEL 4.14 16/31] net: aquantia: fix LRO with FCS error

[Sasha Levin]

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit eaeb3b7494ba9159323814a8ce8af06a9277d99b ]

Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.

Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.

Solution is fill next pointer and eop flag even for packets with FCS error.

Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../aquantia/atlantic/hw_atl/hw_atl_b0.c      | 61 ++++++++++---------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index f4b3554b0b67..236325f48ec9 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -683,38 +683,41 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 		if (is_err || rxd_wb->type & 0x1000U) {
 			/* status error or DMA error */
 			buff->is_error = 1U;
-		} else {
-			if (self->aq_nic_cfg->is_rss) {
-				/* last 4 byte */
-				u16 rss_type = rxd_wb->type & 0xFU;
-
-				if (rss_type && rss_type < 0x8U) {
-					buff->is_hash_l4 = (rss_type == 0x4 ||
-					rss_type == 0x5);
-					buff->rss_hash = rxd_wb->rss_hash;
-				}
+		}
+		if (self->aq_nic_cfg->is_rss) {
+			/* last 4 byte */
+			u16 rss_type = rxd_wb->type & 0xFU;
+
+			if (rss_type && rss_type < 0x8U) {
+				buff->is_hash_l4 = (rss_type == 0x4 ||
+				rss_type == 0x5);
+				buff->rss_hash = rxd_wb->rss_hash;
 			}
+		}
 
-			if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
-				buff->len = rxd_wb->pkt_len %
-					AQ_CFG_RX_FRAME_MAX;
-				buff->len = buff->len ?
-					buff->len : AQ_CFG_RX_FRAME_MAX;
-				buff->next = 0U;
-				buff->is_eop = 1U;
+		if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
+			buff->len = rxd_wb->pkt_len %
+				AQ_CFG_RX_FRAME_MAX;
+			buff->len = buff->len ?
+				buff->len : AQ_CFG_RX_FRAME_MAX;
+			buff->next = 0U;
+			buff->is_eop = 1U;
+		} else {
+			buff->len =
+				rxd_wb->pkt_len > AQ_CFG_RX_FRAME_MAX ?
+				AQ_CFG_RX_FRAME_MAX : rxd_wb->pkt_len;
+
+			if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
+				rxd_wb->status) {
+				/* LRO */
+				buff->next = rxd_wb->next_desc_ptr;
+				++ring->stats.rx.lro_packets;
 			} else {
-				if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
-					rxd_wb->status) {
-					/* LRO */
-					buff->next = rxd_wb->next_desc_ptr;
-					++ring->stats.rx.lro_packets;
-				} else {
-					/* jumbo */
-					buff->next =
-						aq_ring_next_dx(ring,
-								ring->hw_head);
-					++ring->stats.rx.jumbo_packets;
-				}
+				/* jumbo */
+				buff->next =
+					aq_ring_next_dx(ring,
+							ring->hw_head);
+				++ring->stats.rx.jumbo_packets;
 			}
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 17/31] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

[Sasha Levin]

From: Yingjoe Chen <yingjoe.chen@mediatek.com>

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 00e8e675cbeb..eaa312bc3a3c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -297,6 +297,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
 			    rdwr_pa[i].buf[0] < 1 ||
 			    rdwr_pa[i].len < rdwr_pa[i].buf[0] +
 					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
 				res = -EINVAL;
 				break;
 			}
-- 
2.20.1

[PATCH AUTOSEL 4.14 18/31] ALSA: hda - Force polling mode on CNL for fixing codec communication

[Sasha Levin]

From: Bard Liao <yung-chuan.liao@linux.intel.com>

[ Upstream commit fa763f1b2858752e6150ffff46886a1b7faffc82 ]

We observed the same issue as reported by commit a8d7bde23e7130686b7662
("ALSA: hda - Force polling mode on CFL for fixing codec communication")
We don't have a better solution. So apply the same workaround to CNL.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index afa591cf840a..376de6b0ecc7 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -376,6 +376,7 @@ enum {
 
 #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
 #define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
+#define IS_CNL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9dc8)
 
 static char *driver_short_names[] = {
 	[AZX_DRIVER_ICH] = "HDA Intel",
@@ -1751,8 +1752,8 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	else
 		chip->bdl_pos_adj = bdl_pos_adj[dev];
 
-	/* Workaround for a communication error on CFL (bko#199007) */
-	if (IS_CFL(pci))
+	/* Workaround for a communication error on CFL (bko#199007) and CNL */
+	if (IS_CFL(pci) || IS_CNL(pci))
 		chip->polling_mode = 1;
 
 	err = azx_bus_init(chip, model[dev], &pci_hda_io_ops);
-- 
2.20.1

[PATCH AUTOSEL 4.14 19/31] configfs: Fix use-after-free when accessing sd->s_dentry

[Sasha Levin]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d2a1a79fa324..4930a3a211f3 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -58,15 +58,13 @@ static void configfs_d_iput(struct dentry * dentry,
 	if (sd) {
 		/* Coordinate with configfs_readdir */
 		spin_lock(&configfs_dirent_lock);
-		/* Coordinate with configfs_attach_attr where will increase
-		 * sd->s_count and update sd->s_dentry to new allocated one.
-		 * Only set sd->dentry to null when this dentry is the only
-		 * sd owner.
-		 * If not do so, configfs_d_iput may run just after
-		 * configfs_attach_attr and set sd->s_dentry to null
-		 * even it's still in use.
+		/*
+		 * Set sd->s_dentry to null only when this dentry is the one
+		 * that is going to be killed.  Otherwise configfs_d_iput may
+		 * run just after configfs_attach_attr and set sd->s_dentry to
+		 * NULL even it's still in use.
 		 */
-		if (atomic_read(&sd->s_count) <= 2)
+		if (sd->s_dentry == dentry)
 			sd->s_dentry = NULL;
 
 		spin_unlock(&configfs_dirent_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.14 20/31] perf data: Fix 'strncat may truncate' build failure with recent gcc

[Sasha Levin]

From: Shawn Landden <shawn@git.icu>

[ Upstream commit 97acec7df172cd1e450f81f5e293c0aa145a2797 ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/data-convert-bt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c
index 2346cecb8ea2..5131304ea3a8 100644
--- a/tools/perf/util/data-convert-bt.c
+++ b/tools/perf/util/data-convert-bt.c
@@ -271,7 +271,7 @@ static int string_set_value(struct bt_ctf_field *field, const char *string)
 				if (i > 0)
 					strncpy(buffer, string, i);
 			}
-			strncat(buffer + p, numstr, 4);
+			memcpy(buffer + p, numstr, 4);
 			p += 3;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 21/31] perf record: Fix s390 missing module symbol and warning for non-root users

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/s390/util/machine.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c
index 0b2054007314..a19690a17291 100644
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -5,16 +5,19 @@
 #include "util.h"
 #include "machine.h"
 #include "api/fs/fs.h"
+#include "debug.h"
 
 int arch__fix_module_text_start(u64 *start, const char *name)
 {
+	u64 m_start = *start;
 	char path[PATH_MAX];
 
 	snprintf(path, PATH_MAX, "module/%.*s/sections/.text",
 				(int)strlen(name) - 2, name + 1);
-
-	if (sysfs__read_ull(path, (unsigned long long *)start) < 0)
-		return -1;
+	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
+		pr_debug2("Using module %s start:%#lx\n", path, m_start);
+		*start = m_start;
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 22/31] ia64: fix build errors by exporting paddr_to_nid()

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by
exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/numa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index aa19b7ac8222..476c7b4be378 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -49,6 +49,7 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+EXPORT_SYMBOL(paddr_to_nid);
 
 #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.14 23/31] KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list.  Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s.c           |  1 +
 arch/powerpc/kvm/book3s_rtas.c      | 14 ++++++--------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index e3ba58f64c3d..5070b34b12fd 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -296,6 +296,7 @@ struct kvm_arch {
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
 	struct list_head rtas_tokens;
+	struct mutex rtas_token_lock;
 	DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
 #endif
 #ifdef CONFIG_KVM_MPIC
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 72d977e30952..d38280b01ef0 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -836,6 +836,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 #ifdef CONFIG_PPC64
 	INIT_LIST_HEAD_RCU(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
+	mutex_init(&kvm->arch.rtas_token_lock);
 #endif
 
 	return kvm->arch.kvm_ops->init_vm(kvm);
diff --git a/arch/powerpc/kvm/book3s_rtas.c b/arch/powerpc/kvm/book3s_rtas.c
index 2d3b2b1cc272..8f2355138f80 100644
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -146,7 +146,7 @@ static int rtas_token_undefine(struct kvm *kvm, char *name)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		if (rtas_name_matches(d->handler->name, name)) {
@@ -167,7 +167,7 @@ static int rtas_token_define(struct kvm *kvm, char *name, u64 token)
 	bool found;
 	int i;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry(d, &kvm->arch.rtas_tokens, list) {
 		if (d->token == token)
@@ -206,14 +206,14 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp)
 	if (copy_from_user(&args, argp, sizeof(args)))
 		return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.rtas_token_lock);
 
 	if (args.token)
 		rc = rtas_token_define(kvm, args.name, args.token);
 	else
 		rc = rtas_token_undefine(kvm, args.name);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.rtas_token_lock);
 
 	return rc;
 }
@@ -245,7 +245,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	orig_rets = args.rets;
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
 
 	rc = -ENOENT;
 	list_for_each_entry(d, &vcpu->kvm->arch.rtas_tokens, list) {
@@ -256,7 +256,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.rtas_token_lock);
 
 	if (rc == 0) {
 		args.rets = orig_rets;
@@ -282,8 +282,6 @@ void kvmppc_rtas_tokens_free(struct kvm *kvm)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
-
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		list_del(&d->list);
 		kfree(d);
-- 
2.20.1

[PATCH AUTOSEL 4.14 24/31] KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 5a3f49364c3ffa1107bd88f8292406e98c5d206c ]

Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally).  However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt.  Hence there
is a possibility of deadlock.

To fix this, we simply don't take the kvm->lock mutex around these
calls.  This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 58746328b9bd..3b7488fce3db 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -392,12 +392,7 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 
 static struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 {
-	struct kvm_vcpu *ret;
-
-	mutex_lock(&kvm->lock);
-	ret = kvm_get_vcpu_by_id(kvm, id);
-	mutex_unlock(&kvm->lock);
-	return ret;
+	return kvm_get_vcpu_by_id(kvm, id);
 }
 
 static void init_vpa(struct kvm_vcpu *vcpu, struct lppaca *vpa)
@@ -1258,7 +1253,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
 	u64 mask;
 
-	mutex_lock(&kvm->lock);
 	spin_lock(&vc->lock);
 	/*
 	 * If ILE (interrupt little-endian) has changed, update the
@@ -1298,7 +1292,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 		mask &= 0xFFFFFFFF;
 	vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
 	spin_unlock(&vc->lock);
-	mutex_unlock(&kvm->lock);
 }
 
 static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
-- 
2.20.1

[PATCH AUTOSEL 4.14 25/31] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index abfb9faadbc4..9b1906a65e11 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1458,6 +1458,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	sh_eth_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 26/31] net: phy: dp83867: Set up RGMII TX delay

[Sasha Levin]

From: Max Uvarov <muvarov@gmail.com>

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index c1ab976cc800..12b09e6e03ba 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -249,10 +249,8 @@ static int dp83867_config_init(struct phy_device *phydev)
 		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
 		if (ret)
 			return ret;
-	}
 
-	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+		/* Set up RGMII delays */
 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
 
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-- 
2.20.1

[PATCH AUTOSEL 4.14 27/31] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/libcxgbi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 512c8f1ea5b0..902f5e03ec94 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -640,6 +640,10 @@ cxgbi_check_route(struct sockaddr *dst_addr, int ifindex)
 
 	if (ndev->flags & IFF_LOOPBACK) {
 		ndev = ip_dev_find(&init_net, daddr->sin_addr.s_addr);
+		if (!ndev) {
+			err = -ENETUNREACH;
+			goto rel_neigh;
+		}
 		mtu = ndev->mtu;
 		pr_info("rt dev %s, loopback -> %s, mtu %u.\n",
 			n->dev->name, ndev->name, mtu);
-- 
2.20.1

[PATCH AUTOSEL 4.14 28/31] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[Sasha Levin]

From: Lianbo Jiang <lijiang@redhat.com>

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 5ec2898d21cd..d34351c6b9af 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6392,7 +6392,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
 	else
 		mask = DMA_BIT_MASK(32);
 
-	rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
+	rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
 	if (rc) {
 		dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
 		goto disable_device;
-- 
2.20.1

[PATCH AUTOSEL 4.14 29/31] scsi: scsi_dh_alua: Fix possible null-ptr-deref

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 0962fd544401..09c6a16fab93 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1151,10 +1151,8 @@ static int __init alua_init(void)
 	int r;
 
 	kaluad_wq = alloc_workqueue("kaluad", WQ_MEM_RECLAIM, 0);
-	if (!kaluad_wq) {
-		/* Temporary failure, bypass */
-		return SCSI_DH_DEV_TEMP_BUSY;
-	}
+	if (!kaluad_wq)
+		return -ENOMEM;
 
 	r = scsi_register_device_handler(&alua_dh);
 	if (r != 0) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 30/31] scsi: libsas: delete sas port if expander discover failed

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index ffea620a147d..259ee0d3c3e6 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -989,6 +989,8 @@ static struct domain_device *sas_ex_discover_expander(
 		list_del(&child->dev_list_node);
 		spin_unlock_irq(&parent->port->dev_list_lock);
 		sas_put_device(child);
+		sas_port_delete(phy->port);
+		phy->port = NULL;
 		return NULL;
 	}
 	list_add_tail(&child->siblings, &parent->ex_dev.children);
-- 
2.20.1

[PATCH AUTOSEL 4.14 31/31] mlxsw: spectrum: Prevent force of 56G

[Sasha Levin]

From: Amit Cohen <amitc@mellanox.com>

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ab09f9e43c79..5c74787f903b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2505,6 +2505,10 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
 	mlxsw_reg_ptys_eth_unpack(ptys_pl, &eth_proto_cap, NULL, NULL);
 
 	autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
+	if (!autoneg && cmd->base.speed == SPEED_56000) {
+		netdev_err(dev, "56G not supported with autoneg off\n");
+		return -EINVAL;
+	}
 	eth_proto_new = autoneg ?
 		mlxsw_sp_to_ptys_advert_link(cmd) :
 		mlxsw_sp_to_ptys_speed(cmd->base.speed);
-- 
2.20.1