* [PATCH] staging: rtl8723bs: use DIV_ROUND_UP helper macro
@ 2019-10-13 18:00 Wambui Karuga
2019-10-13 18:06 ` [Outreachy kernel] " Julia Lawall
0 siblings, 1 reply; 3+ messages in thread
From: Wambui Karuga @ 2019-10-13 18:00 UTC (permalink / raw)
To: outreachy-kernel; +Cc: gregkh, devel, linux-kernel
Use the DIV_ROUND_UP macro to replace open-coded divisor calculation
to improve readability.
Issue found using coccinelle:
@@
expression n,d;
@@
(
- ((n + d - 1) / d)
+ DIV_ROUND_UP(n,d)
|
- ((n + (d - 1)) / d)
+ DIV_ROUND_UP(n,d)
)
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
---
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 87535a4c2e14..74312e8bb32e 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -4158,7 +4158,8 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
/* The value of ((usNavUpper + HAL_NAV_UPPER_UNIT_8723B - 1) / HAL_NAV_UPPER_UNIT_8723B) */
/* is getting the upper integer. */
- usNavUpper = (usNavUpper + HAL_NAV_UPPER_UNIT_8723B - 1) / HAL_NAV_UPPER_UNIT_8723B;
+ usNavUpper = DIV_ROUND_UP(usNavUpper,
+ HAL_NAV_UPPER_UNIT_8723B);
rtw_write8(padapter, REG_NAV_UPPER, (u8)usNavUpper);
}
break;
--
2.23.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Outreachy kernel] [PATCH] staging: rtl8723bs: use DIV_ROUND_UP helper macro
2019-10-13 18:00 [PATCH] staging: rtl8723bs: use DIV_ROUND_UP helper macro Wambui Karuga
@ 2019-10-13 18:06 ` Julia Lawall
2019-10-13 18:54 ` Wambui Karuga
0 siblings, 1 reply; 3+ messages in thread
From: Julia Lawall @ 2019-10-13 18:06 UTC (permalink / raw)
To: Wambui Karuga; +Cc: outreachy-kernel, gregkh, devel, linux-kernel
On Sun, 13 Oct 2019, Wambui Karuga wrote:
> Use the DIV_ROUND_UP macro to replace open-coded divisor calculation
> to improve readability.
> Issue found using coccinelle:
> @@
> expression n,d;
> @@
> (
> - ((n + d - 1) / d)
> + DIV_ROUND_UP(n,d)
> |
> - ((n + (d - 1)) / d)
> + DIV_ROUND_UP(n,d)
> )
>
> Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
> ---
> drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> index 87535a4c2e14..74312e8bb32e 100644
> --- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> +++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> @@ -4158,7 +4158,8 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
>
> /* The value of ((usNavUpper + HAL_NAV_UPPER_UNIT_8723B - 1) / HAL_NAV_UPPER_UNIT_8723B) */
> /* is getting the upper integer. */
It's a nice change. Maybe the above comment could also be dropped, since
the code is more understandable now.
julia
> - usNavUpper = (usNavUpper + HAL_NAV_UPPER_UNIT_8723B - 1) / HAL_NAV_UPPER_UNIT_8723B;
> + usNavUpper = DIV_ROUND_UP(usNavUpper,
> + HAL_NAV_UPPER_UNIT_8723B);
> rtw_write8(padapter, REG_NAV_UPPER, (u8)usNavUpper);
> }
> break;
> --
> 2.23.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20191013180033.31882-1-wambui.karugax%40gmail.com.
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Outreachy kernel] [PATCH] staging: rtl8723bs: use DIV_ROUND_UP helper macro
2019-10-13 18:06 ` [Outreachy kernel] " Julia Lawall
@ 2019-10-13 18:54 ` Wambui Karuga
0 siblings, 0 replies; 3+ messages in thread
From: Wambui Karuga @ 2019-10-13 18:54 UTC (permalink / raw)
To: Julia Lawall; +Cc: outreachy-kernel, gregkh, devel, linux-kernel
On Sun, Oct 13, 2019 at 08:06:14PM +0200, Julia Lawall wrote:
>
>
> On Sun, 13 Oct 2019, Wambui Karuga wrote:
>
> > Use the DIV_ROUND_UP macro to replace open-coded divisor calculation
> > to improve readability.
> > Issue found using coccinelle:
> > @@
> > expression n,d;
> > @@
> > (
> > - ((n + d - 1) / d)
> > + DIV_ROUND_UP(n,d)
> > |
> > - ((n + (d - 1)) / d)
> > + DIV_ROUND_UP(n,d)
> > )
> >
> > Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
> > ---
> > drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > index 87535a4c2e14..74312e8bb32e 100644
> > --- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > +++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> > @@ -4158,7 +4158,8 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
> >
> > /* The value of ((usNavUpper + HAL_NAV_UPPER_UNIT_8723B - 1) / HAL_NAV_UPPER_UNIT_8723B) */
> > /* is getting the upper integer. */
>
> It's a nice change. Maybe the above comment could also be dropped, since
> the code is more understandable now.
>
> julia
>
Ok, I agree. Will update this.
wambui karuga
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-13 18:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-13 18:00 [PATCH] staging: rtl8723bs: use DIV_ROUND_UP helper macro Wambui Karuga
2019-10-13 18:06 ` [Outreachy kernel] " Julia Lawall
2019-10-13 18:54 ` Wambui Karuga
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox