From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Auger Eric <eric.auger@redhat.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>,
iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe@linaro.com>,
Yi Liu <yi.l.liu@intel.com>, "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Christoph Hellwig <hch@infradead.org>,
Jonathan Cameron <jic23@kernel.org>,
jacob.jun.pan@linux.intel.com
Subject: Re: [PATCH V10 07/11] iommu/vt-d: Support flushing more translation cache types
Date: Mon, 30 Mar 2020 16:28:34 -0700 [thread overview]
Message-ID: <20200330162834.5ef42700@jacob-builder> (raw)
In-Reply-To: <c90fafad-253a-b2f5-2a6c-87bc319edd02@redhat.com>
On Fri, 27 Mar 2020 15:46:23 +0100
Auger Eric <eric.auger@redhat.com> wrote:
> Hi Jacob,
>
> On 3/21/20 12:27 AM, Jacob Pan wrote:
> > When Shared Virtual Memory is exposed to a guest via vIOMMU,
> > scalable IOTLB invalidation may be passed down from outside IOMMU
> > subsystems. This patch adds invalidation functions that can be used
> > for additional translation cache types.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> >
> > ---
> > v9 -> v10:
> > Fix off by 1 in pasid device iotlb flush
> >
> > Address v7 missed review from Eric
> >
> > ---
> > ---
> > drivers/iommu/dmar.c | 36
> > ++++++++++++++++++++++++++++++++++++ drivers/iommu/intel-pasid.c |
> > 3 ++- include/linux/intel-iommu.h | 20 ++++++++++++++++----
> > 3 files changed, 54 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> > index f77dae7ba7d4..4d6b7b5b37ee 100644
> > --- a/drivers/iommu/dmar.c
> > +++ b/drivers/iommu/dmar.c
> > @@ -1421,6 +1421,42 @@ void qi_flush_piotlb(struct intel_iommu
> > *iommu, u16 did, u32 pasid, u64 addr, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based device IOTLB Invalidate */
> > +void qi_flush_dev_iotlb_pasid(struct intel_iommu *iommu, u16 sid,
> > u16 pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned
> > size_order, u64 granu) +{
> > + unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size_order -
> > 1);
> > + struct qi_desc desc = {.qw2 = 0, .qw3 = 0};
> > +
> > + desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) |
> > QI_DEV_EIOTLB_SID(sid) |
> > + QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE |
> > + QI_DEV_IOTLB_PFSID(pfsid);
> > + desc.qw1 = QI_DEV_EIOTLB_GLOB(granu);
> > +
> > + /*
> > + * If S bit is 0, we only flush a single page. If S bit is
> > set,
> > + * The least significant zero bit indicates the
> > invalidation address
> > + * range. VT-d spec 6.5.2.6.
> > + * e.g. address bit 12[0] indicates 8KB, 13[0] indicates
> > 16KB.
> > + * size order = 0 is PAGE_SIZE 4KB
> > + * Max Invs Pending (MIP) is set to 0 for now until we
> > have DIT in
> > + * ECAP.
> > + */
> > + desc.qw1 |= addr & ~mask;
> > + if (size_order)
> > + desc.qw1 |= QI_DEV_EIOTLB_SIZE;
> > +
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > +void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64
> > granu, int pasid) +{
> > + struct qi_desc desc = {.qw1 = 0, .qw2 = 0, .qw3 = 0};
> > +
> > + desc.qw0 = QI_PC_PASID(pasid) | QI_PC_DID(did) |
> > QI_PC_GRAN(granu) | QI_PC_TYPE;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > /*
> > * Disable Queued Invalidation interface.
> > */
> > diff --git a/drivers/iommu/intel-pasid.c
> > b/drivers/iommu/intel-pasid.c index 10c7856afc6b..9f6d07410722
> > 100644 --- a/drivers/iommu/intel-pasid.c
> > +++ b/drivers/iommu/intel-pasid.c
> > @@ -435,7 +435,8 @@ pasid_cache_invalidation_with_pasid(struct
> > intel_iommu *iommu, {
> > struct qi_desc desc;
> >
> > - desc.qw0 = QI_PC_DID(did) | QI_PC_PASID_SEL |
> > QI_PC_PASID(pasid);
> > + desc.qw0 = QI_PC_DID(did) | QI_PC_GRAN(QI_PC_PASID_SEL) |
> > + QI_PC_PASID(pasid) | QI_PC_TYPE;
> Just a nit, this fix is not documented in the commit message.
>
Thanks, I just sent out this fix separately. Will remove this from the
set.
https://lkml.org/lkml/2020/3/30/1065
> Besides
> Reviewed-by: Eric Auger <eric.auger@redhat.com>
>
> Thanks
>
> Eric
>
> > desc.qw1 = 0;
> > desc.qw2 = 0;
> > desc.qw3 = 0;
> > diff --git a/include/linux/intel-iommu.h
> > b/include/linux/intel-iommu.h index 85b05120940e..43539713b3b3
> > 100644 --- a/include/linux/intel-iommu.h
> > +++ b/include/linux/intel-iommu.h
> > @@ -334,7 +334,7 @@ enum {
> > #define QI_IOTLB_GRAN(gran) (((u64)gran) >>
> > (DMA_TLB_FLUSH_GRANU_OFFSET-4)) #define QI_IOTLB_ADDR(addr)
> > (((u64)addr) & VTD_PAGE_MASK) #define
> > QI_IOTLB_IH(ih) (((u64)ih) << 6) -#define
> > QI_IOTLB_AM(am) (((u8)am)) +#define
> > QI_IOTLB_AM(am) (((u8)am) & 0x3f)
> > #define QI_CC_FM(fm) (((u64)fm) << 48)
> > #define QI_CC_SID(sid) (((u64)sid) << 32)
> > @@ -353,16 +353,21 @@ enum {
> > #define QI_PC_DID(did) (((u64)did) << 16)
> > #define QI_PC_GRAN(gran) (((u64)gran) << 4)
> >
> > -#define QI_PC_ALL_PASIDS (QI_PC_TYPE | QI_PC_GRAN(0))
> > -#define QI_PC_PASID_SEL (QI_PC_TYPE | QI_PC_GRAN(1))
> > +/* PASID cache invalidation granu */
> > +#define QI_PC_ALL_PASIDS 0
> > +#define QI_PC_PASID_SEL 1
> >
> > #define QI_EIOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
> > #define QI_EIOTLB_IH(ih) (((u64)ih) << 6)
> > -#define QI_EIOTLB_AM(am) (((u64)am))
> > +#define QI_EIOTLB_AM(am) (((u64)am) & 0x3f)
> > #define QI_EIOTLB_PASID(pasid) (((u64)pasid) << 32)
> > #define QI_EIOTLB_DID(did) (((u64)did) << 16)
> > #define QI_EIOTLB_GRAN(gran) (((u64)gran) << 4)
> >
> > +/* QI Dev-IOTLB inv granu */
> > +#define QI_DEV_IOTLB_GRAN_ALL 1
> > +#define QI_DEV_IOTLB_GRAN_PASID_SEL 0> +
> > #define QI_DEV_EIOTLB_ADDR(a) ((u64)(a) & VTD_PAGE_MASK)
> > #define QI_DEV_EIOTLB_SIZE (((u64)1) << 11)
> > #define QI_DEV_EIOTLB_GLOB(g) ((u64)g)
> > @@ -662,8 +667,15 @@ extern void qi_flush_iotlb(struct intel_iommu
> > *iommu, u16 did, u64 addr, unsigned int size_order, u64 type);
> > extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid,
> > u16 pfsid, u16 qdep, u64 addr, unsigned mask);
> > +
> > void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u32
> > pasid, u64 addr, unsigned long npages, bool ih);
> > +
> > +extern void qi_flush_dev_iotlb_pasid(struct intel_iommu *iommu,
> > u16 sid, u16 pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned
> > size_order, u64 granu); +
> > +extern void qi_flush_pasid_cache(struct intel_iommu *iommu, u16
> > did, u64 granu, int pasid); +
> > extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu
> > *iommu);
> > extern int dmar_ir_support(void);
> >
>
[Jacob Pan]
next prev parent reply other threads:[~2020-03-30 23:22 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 23:27 [PATCH V10 00/11] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2020-03-20 23:27 ` [PATCH V10 01/11] iommu/vt-d: Move domain helper to header Jacob Pan
2020-03-27 11:48 ` Tian, Kevin
2020-03-20 23:27 ` [PATCH V10 02/11] iommu/uapi: Define a mask for bind data Jacob Pan
2020-03-22 1:29 ` Lu Baolu
2020-03-23 19:37 ` Jacob Pan
2020-03-24 1:50 ` Lu Baolu
2020-03-27 11:50 ` Tian, Kevin
2020-03-27 14:13 ` Auger Eric
2020-03-20 23:27 ` [PATCH V10 03/11] iommu/vt-d: Add a helper function to skip agaw Jacob Pan
2020-03-27 11:53 ` Tian, Kevin
2020-03-29 7:20 ` Lu Baolu
2020-03-30 17:50 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 04/11] iommu/vt-d: Use helper function to skip agaw for SL Jacob Pan
2020-03-27 11:55 ` Tian, Kevin
2020-03-27 16:05 ` Auger Eric
2020-03-29 7:35 ` Lu Baolu
2020-03-20 23:27 ` [PATCH V10 05/11] iommu/vt-d: Add nested translation helper function Jacob Pan
2020-03-27 12:21 ` Tian, Kevin
2020-03-29 8:03 ` Lu Baolu
2020-03-30 18:21 ` Jacob Pan
2020-03-31 3:36 ` Tian, Kevin
2020-03-29 11:35 ` Auger Eric
2020-04-01 20:06 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 06/11] iommu/vt-d: Add bind guest PASID support Jacob Pan
2020-03-28 8:02 ` Tian, Kevin
2020-03-30 20:51 ` Jacob Pan
2020-03-31 3:43 ` Tian, Kevin
2020-04-01 17:13 ` Jacob Pan
2020-03-29 13:40 ` Auger Eric
2020-03-30 22:53 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 07/11] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2020-03-27 14:46 ` Auger Eric
2020-03-30 23:28 ` Jacob Pan [this message]
2020-03-31 16:13 ` Jacob Pan
2020-03-31 16:15 ` Auger Eric
2020-03-20 23:27 ` [PATCH V10 08/11] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2020-03-28 10:01 ` Tian, Kevin
2020-03-29 15:34 ` Auger Eric
2020-03-31 2:49 ` Tian, Kevin
2020-03-31 20:58 ` Jacob Pan
2020-04-01 6:29 ` Tian, Kevin
2020-04-01 7:13 ` Liu, Yi L
2020-04-01 7:32 ` Auger Eric
2020-04-01 16:05 ` Jacob Pan
2020-04-02 15:54 ` Jacob Pan
2020-03-29 16:05 ` Auger Eric
2020-03-31 3:34 ` Tian, Kevin
2020-03-31 21:07 ` Jacob Pan
2020-04-01 6:32 ` Tian, Kevin
2020-03-31 18:13 ` Jacob Pan
2020-04-01 6:24 ` Tian, Kevin
2020-04-01 6:57 ` Liu, Yi L
2020-04-01 16:03 ` Jacob Pan
2020-03-29 16:05 ` Auger Eric
2020-03-31 22:28 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 09/11] iommu/vt-d: Cache virtual command capability register Jacob Pan
2020-03-28 10:04 ` Tian, Kevin
2020-03-31 22:33 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 10/11] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2020-03-28 10:08 ` Tian, Kevin
2020-03-31 22:37 ` Jacob Pan
2020-03-20 23:27 ` [PATCH V10 11/11] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2020-03-28 10:22 ` Tian, Kevin
2020-04-01 15:47 ` Jacob Pan
2020-04-02 2:18 ` Tian, Kevin
2020-04-02 20:28 ` Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200330162834.5ef42700@jacob-builder \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe@linaro.com \
--cc=jic23@kernel.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox