[PATCH AUTOSEL 4.19 01/13] ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage

[PATCH AUTOSEL 4.19 01/13] ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage

[Sasha Levin]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit a40550952c000667b20082d58077bc647da6c890 ]

Lowering the voltage solves the quick image degradation over time
(minutes), that was probably caused by overheating.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 49547a43cc90a..54cbdaf7ffdcc 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -318,8 +318,8 @@
 };
 
 &reg_dldo3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vdd-csi";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/13] bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads

[Sasha Levin]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]

When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.

The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)

% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]

Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/sunxi-rsb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1b76d95859027..2ca2cc56bcef6 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -345,7 +345,7 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
 	if (ret)
 		goto unlock;
 
-	*buf = readl(rsb->regs + RSB_DATA);
+	*buf = readl(rsb->regs + RSB_DATA) & GENMASK(len * 8 - 1, 0);
 
 unlock:
 	mutex_unlock(&rsb->lock);
-- 
2.20.1

[PATCH AUTOSEL 4.19 03/13] rxrpc: Abstract out the calculation of whether there's Tx space

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 158fe6665389964a1de212818b4a5c52b7f7aff4 ]

Abstract out the calculation of there being sufficient Tx buffer space.
This is reproduced several times in the rxrpc sendmsg code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/sendmsg.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index 3e54ead1e921a..68993439e1d91 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -21,6 +21,21 @@
 #include <net/af_rxrpc.h>
 #include "ar-internal.h"
 
+/*
+ * Return true if there's sufficient Tx queue space.
+ */
+static bool rxrpc_check_tx_space(struct rxrpc_call *call, rxrpc_seq_t *_tx_win)
+{
+	unsigned int win_size =
+		min_t(unsigned int, call->tx_winsize,
+		      call->cong_cwnd + call->cong_extra);
+	rxrpc_seq_t tx_win = READ_ONCE(call->tx_hard_ack);
+
+	if (_tx_win)
+		*_tx_win = tx_win;
+	return call->tx_top - tx_win < win_size;
+}
+
 /*
  * Wait for space to appear in the Tx queue or a signal to occur.
  */
@@ -30,9 +45,7 @@ static int rxrpc_wait_for_tx_window_intr(struct rxrpc_sock *rx,
 {
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (call->tx_top - call->tx_hard_ack <
-		    min_t(unsigned int, call->tx_winsize,
-			  call->cong_cwnd + call->cong_extra))
+		if (rxrpc_check_tx_space(call, NULL))
 			return 0;
 
 		if (call->state >= RXRPC_CALL_COMPLETE)
@@ -72,9 +85,7 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx,
 		set_current_state(TASK_UNINTERRUPTIBLE);
 
 		tx_win = READ_ONCE(call->tx_hard_ack);
-		if (call->tx_top - tx_win <
-		    min_t(unsigned int, call->tx_winsize,
-			  call->cong_cwnd + call->cong_extra))
+		if (rxrpc_check_tx_space(call, &tx_win))
 			return 0;
 
 		if (call->state >= RXRPC_CALL_COMPLETE)
@@ -305,9 +316,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,
 
 			_debug("alloc");
 
-			if (call->tx_top - call->tx_hard_ack >=
-			    min_t(unsigned int, call->tx_winsize,
-				  call->cong_cwnd + call->cong_extra)) {
+			if (!rxrpc_check_tx_space(call, NULL)) {
 				ret = -EAGAIN;
 				if (msg->msg_flags & MSG_DONTWAIT)
 					goto maybe_error;
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/13] rxrpc: Fix sendmsg(MSG_WAITALL) handling

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 498b577660f08cef5d9e78e0ed6dcd4c0939e98c ]

Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the
timeout for when a signal occurs up to at least two jiffies as a 1 jiffy
timeout may end up being effectively 0 if jiffies wraps at the wrong time.

Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/sendmsg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index 68993439e1d91..7ee72053037a3 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -75,8 +75,8 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx,
 
 	rtt = READ_ONCE(call->peer->rtt);
 	rtt2 = nsecs_to_jiffies64(rtt) * 2;
-	if (rtt2 < 1)
-		rtt2 = 1;
+	if (rtt2 < 2)
+		rtt2 = 2;
 
 	timeout = rtt2;
 	tx_start = READ_ONCE(call->tx_hard_ack);
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/13] net: vxge: fix wrong __VA_ARGS__ usage

[Sasha Levin]

From: Zheng Wei <wei.zheng@vivo.com>

[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]

printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).

Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/neterion/vxge/vxge-config.h |  2 +-
 drivers/net/ethernet/neterion/vxge/vxge-main.h   | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h
index d743a37a3cee8..e5dda2c27f187 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h
@@ -2065,7 +2065,7 @@ vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask);
 	if ((level >= VXGE_ERR && VXGE_COMPONENT_LL & VXGE_DEBUG_ERR_MASK) ||  \
 	    (level >= VXGE_TRACE && VXGE_COMPONENT_LL & VXGE_DEBUG_TRACE_MASK))\
 		if ((mask & VXGE_DEBUG_MASK) == mask)			       \
-			printk(fmt "\n", __VA_ARGS__);			       \
+			printk(fmt "\n", ##__VA_ARGS__);		       \
 } while (0)
 #else
 #define vxge_debug_ll(level, mask, fmt, ...)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h
index 59a57ff5e96af..9c86f4f9cd424 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.h
@@ -452,49 +452,49 @@ int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override);
 
 #if (VXGE_DEBUG_LL_CONFIG & VXGE_DEBUG_MASK)
 #define vxge_debug_ll_config(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_ll_config(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INIT & VXGE_DEBUG_MASK)
 #define vxge_debug_init(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_init(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_TX & VXGE_DEBUG_MASK)
 #define vxge_debug_tx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_tx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_RX & VXGE_DEBUG_MASK)
 #define vxge_debug_rx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_rx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_MEM & VXGE_DEBUG_MASK)
 #define vxge_debug_mem(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_mem(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)
 #define vxge_debug_entryexit(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_entryexit(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INTR & VXGE_DEBUG_MASK)
 #define vxge_debug_intr(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_intr(level, fmt, ...)
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/13] hinic: fix a bug of waitting for IO stopped

[Sasha Levin]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 96758117dc528e6d84bd23d205e8cf7f31eda029 ]

it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  | 51 +------------------
 1 file changed, 2 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index 9deec13d98e93..4c91c8ceac5f9 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -370,50 +370,6 @@ static int wait_for_db_state(struct hinic_hwdev *hwdev)
 	return -EFAULT;
 }
 
-static int wait_for_io_stopped(struct hinic_hwdev *hwdev)
-{
-	struct hinic_cmd_io_status cmd_io_status;
-	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
-	struct hinic_pfhwdev *pfhwdev;
-	unsigned long end;
-	u16 out_size;
-	int err;
-
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
-	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
-
-	cmd_io_status.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
-
-	end = jiffies + msecs_to_jiffies(IO_STATUS_TIMEOUT);
-	do {
-		err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
-					HINIC_COMM_CMD_IO_STATUS_GET,
-					&cmd_io_status, sizeof(cmd_io_status),
-					&cmd_io_status, &out_size,
-					HINIC_MGMT_MSG_SYNC);
-		if ((err) || (out_size != sizeof(cmd_io_status))) {
-			dev_err(&pdev->dev, "Failed to get IO status, ret = %d\n",
-				err);
-			return err;
-		}
-
-		if (cmd_io_status.status == IO_STOPPED) {
-			dev_info(&pdev->dev, "IO stopped\n");
-			return 0;
-		}
-
-		msleep(20);
-	} while (time_before(jiffies, end));
-
-	dev_err(&pdev->dev, "Wait for IO stopped - Timeout\n");
-	return -ETIMEDOUT;
-}
-
 /**
  * clear_io_resource - set the IO resources as not active in the NIC
  * @hwdev: the NIC HW device
@@ -433,11 +389,8 @@ static int clear_io_resources(struct hinic_hwdev *hwdev)
 		return -EINVAL;
 	}
 
-	err = wait_for_io_stopped(hwdev);
-	if (err) {
-		dev_err(&pdev->dev, "IO has not stopped yet\n");
-		return err;
-	}
+	/* sleep 100ms to wait for firmware stopping I/O */
+	msleep(100);
 
 	cmd_clear_io_res.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 07/13] hinic: fix wrong para of wait_for_completion_timeout

[Sasha Levin]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 0da7c322f116210ebfdda59c7da663a6fc5e9cc8 ]

the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 3 ++-
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
index 4d09ea786b35f..ee715bf785adf 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
@@ -398,7 +398,8 @@ static int cmdq_sync_cmd_direct_resp(struct hinic_cmdq *cmdq,
 
 	spin_unlock_bh(&cmdq->cmdq_lock);
 
-	if (!wait_for_completion_timeout(&done, CMDQ_TIMEOUT)) {
+	if (!wait_for_completion_timeout(&done,
+					 msecs_to_jiffies(CMDQ_TIMEOUT))) {
 		spin_lock_bh(&cmdq->cmdq_lock);
 
 		if (cmdq->errcode[curr_prod_idx] == &errcode)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
index 278dc13f3dae8..9fcf2e5e00039 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
@@ -52,7 +52,7 @@
 
 #define MSG_NOT_RESP                    0xFFFF
 
-#define MGMT_MSG_TIMEOUT                1000
+#define MGMT_MSG_TIMEOUT                5000
 
 #define mgmt_to_pfhwdev(pf_mgmt)        \
 		container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt)
@@ -276,7 +276,8 @@ static int msg_to_mgmt_sync(struct hinic_pf_to_mgmt *pf_to_mgmt,
 		goto unlock_sync_msg;
 	}
 
-	if (!wait_for_completion_timeout(recv_done, MGMT_MSG_TIMEOUT)) {
+	if (!wait_for_completion_timeout(recv_done,
+					 msecs_to_jiffies(MGMT_MSG_TIMEOUT))) {
 		dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id);
 		err = -ETIMEDOUT;
 		goto unlock_sync_msg;
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/13] netfilter: nf_tables: Allow set back-ends to report partial overlaps on insertion

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 8c2d45b2b65ca1f215244be1c600236e83f9815f ]

Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it
might indicate that a given element (including intervals) already exists as
such, or that the new element would clash with existing ones.

If identical elements already exist, the front-end is ignoring this without
returning error, in case NLM_F_EXCL is not set. However, if the new element
can't be inserted due an overlap, we should report this to the user.

To this purpose, allow set back-ends to return -ENOTEMPTY on collision with
existing elements, translate that to -EEXIST, and return that to userspace,
no matter if NLM_F_EXCL was set.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 5881f66688171..71d6170e60b4f 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4527,6 +4527,11 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 				err = -EBUSY;
 			else if (!(nlmsg_flags & NLM_F_EXCL))
 				err = 0;
+		} else if (err == -ENOTEMPTY) {
+			/* ENOTEMPTY reports overlapping between this element
+			 * and an existing one.
+			 */
+			err = -EEXIST;
 		}
 		goto err5;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/13] netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()

[Sasha Levin]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 6f7c9caf017be8ab0fe3b99509580d0793bf0833 ]

Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().

This gets especially useful in the next patch.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 0221510328d4f..84d317418d184 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -36,6 +36,11 @@ static bool nft_rbtree_interval_end(const struct nft_rbtree_elem *rbe)
 	       (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END);
 }
 
+static bool nft_rbtree_interval_start(const struct nft_rbtree_elem *rbe)
+{
+	return !nft_rbtree_interval_end(rbe);
+}
+
 static bool nft_rbtree_equal(const struct nft_set *set, const void *this,
 			     const struct nft_rbtree_elem *interval)
 {
@@ -67,7 +72,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 			if (interval &&
 			    nft_rbtree_equal(set, this, interval) &&
 			    nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(interval))
+			    nft_rbtree_interval_start(interval))
 				continue;
 			interval = rbe;
 		} else if (d > 0)
@@ -92,7 +97,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 
 	if (set->flags & NFT_SET_INTERVAL && interval != NULL &&
 	    nft_set_elem_active(&interval->ext, genmask) &&
-	    !nft_rbtree_interval_end(interval)) {
+	    nft_rbtree_interval_start(interval)) {
 		*ext = &interval->ext;
 		return true;
 	}
@@ -221,9 +226,9 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 			p = &parent->rb_right;
 		else {
 			if (nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(new)) {
+			    nft_rbtree_interval_start(new)) {
 				p = &parent->rb_left;
-			} else if (!nft_rbtree_interval_end(rbe) &&
+			} else if (nft_rbtree_interval_start(rbe) &&
 				   nft_rbtree_interval_end(new)) {
 				p = &parent->rb_right;
 			} else if (nft_set_elem_active(&rbe->ext, genmask)) {
@@ -314,10 +319,10 @@ static void *nft_rbtree_deactivate(const struct net *net,
 			parent = parent->rb_right;
 		else {
 			if (nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(this)) {
+			    nft_rbtree_interval_start(this)) {
 				parent = parent->rb_left;
 				continue;
-			} else if (!nft_rbtree_interval_end(rbe) &&
+			} else if (nft_rbtree_interval_start(rbe) &&
 				   nft_rbtree_interval_end(this)) {
 				parent = parent->rb_right;
 				continue;
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/13] netfilter: nft_set_rbtree: Detect partial overlaps on insertion

[Sasha Levin]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 7c84d41416d836ef7e533bd4d64ccbdf40c5ac70 ]

...and return -ENOTEMPTY to the front-end in this case, instead of
proceeding. Currently, nft takes care of checking for these cases
and not sending them to the kernel, but if we drop the set_overlap()
call in nft we can end up in situations like:

 # nft add table t
 # nft add set t s '{ type inet_service ; flags interval ; }'
 # nft add element t s '{ 1 - 5 }'
 # nft add element t s '{ 6 - 10 }'
 # nft add element t s '{ 4 - 7 }'
 # nft list set t s
 table ip t {
 	set s {
 		type inet_service
 		flags interval
 		elements = { 1-3, 4-5, 6-7 }
 	}
 }

This change has the primary purpose of making the behaviour
consistent with nft_set_pipapo, but is also functional to avoid
inconsistent behaviour if userspace sends overlapping elements for
any reason.

v2: When we meet the same key data in the tree, as start element while
    inserting an end element, or as end element while inserting a start
    element, actually check that the existing element is active, before
    resetting the overlap flag (Pablo Neira Ayuso)

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 70 ++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 84d317418d184..1769e8c473e11 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -210,8 +210,43 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 	u8 genmask = nft_genmask_next(net);
 	struct nft_rbtree_elem *rbe;
 	struct rb_node *parent, **p;
+	bool overlap = false;
 	int d;
 
+	/* Detect overlaps as we descend the tree. Set the flag in these cases:
+	 *
+	 * a1. |__ _ _?  >|__ _ _  (insert start after existing start)
+	 * a2. _ _ __>|  ?_ _ __|  (insert end before existing end)
+	 * a3. _ _ ___|  ?_ _ _>|  (insert end after existing end)
+	 * a4. >|__ _ _   _ _ __|  (insert start before existing end)
+	 *
+	 * and clear it later on, as we eventually reach the points indicated by
+	 * '?' above, in the cases described below. We'll always meet these
+	 * later, locally, due to tree ordering, and overlaps for the intervals
+	 * that are the closest together are always evaluated last.
+	 *
+	 * b1. |__ _ _!  >|__ _ _  (insert start after existing end)
+	 * b2. _ _ __>|  !_ _ __|  (insert end before existing start)
+	 * b3. !_____>|            (insert end after existing start)
+	 *
+	 * Case a4. resolves to b1.:
+	 * - if the inserted start element is the leftmost, because the '0'
+	 *   element in the tree serves as end element
+	 * - otherwise, if an existing end is found. Note that end elements are
+	 *   always inserted after corresponding start elements.
+	 *
+	 * For a new, rightmost pair of elements, we'll hit cases b1. and b3.,
+	 * in that order.
+	 *
+	 * The flag is also cleared in two special cases:
+	 *
+	 * b4. |__ _ _!|<_ _ _   (insert start right before existing end)
+	 * b5. |__ _ >|!__ _ _   (insert end right after existing start)
+	 *
+	 * which always happen as last step and imply that no further
+	 * overlapping is possible.
+	 */
+
 	parent = NULL;
 	p = &priv->root.rb_node;
 	while (*p != NULL) {
@@ -220,17 +255,42 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 		d = memcmp(nft_set_ext_key(&rbe->ext),
 			   nft_set_ext_key(&new->ext),
 			   set->klen);
-		if (d < 0)
+		if (d < 0) {
 			p = &parent->rb_left;
-		else if (d > 0)
+
+			if (nft_rbtree_interval_start(new)) {
+				overlap = nft_rbtree_interval_start(rbe) &&
+					  nft_set_elem_active(&rbe->ext,
+							      genmask);
+			} else {
+				overlap = nft_rbtree_interval_end(rbe) &&
+					  nft_set_elem_active(&rbe->ext,
+							      genmask);
+			}
+		} else if (d > 0) {
 			p = &parent->rb_right;
-		else {
+
+			if (nft_rbtree_interval_end(new)) {
+				overlap = nft_rbtree_interval_end(rbe) &&
+					  nft_set_elem_active(&rbe->ext,
+							      genmask);
+			} else if (nft_rbtree_interval_end(rbe) &&
+				   nft_set_elem_active(&rbe->ext, genmask)) {
+				overlap = true;
+			}
+		} else {
 			if (nft_rbtree_interval_end(rbe) &&
 			    nft_rbtree_interval_start(new)) {
 				p = &parent->rb_left;
+
+				if (nft_set_elem_active(&rbe->ext, genmask))
+					overlap = false;
 			} else if (nft_rbtree_interval_start(rbe) &&
 				   nft_rbtree_interval_end(new)) {
 				p = &parent->rb_right;
+
+				if (nft_set_elem_active(&rbe->ext, genmask))
+					overlap = false;
 			} else if (nft_set_elem_active(&rbe->ext, genmask)) {
 				*ext = &rbe->ext;
 				return -EEXIST;
@@ -239,6 +299,10 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 			}
 		}
 	}
+
+	if (overlap)
+		return -ENOTEMPTY;
+
 	rb_link_node_rcu(&new->node, parent, p);
 	rb_insert_color(&new->node, &priv->root);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/13] cxgb4/ptp: pass the sign of offset delta in FW CMD

[Sasha Levin]

From: Raju Rangoju <rajur@chelsio.com>

[ Upstream commit 50e0d28d3808146cc19b0d5564ef4ba9e5bf3846 ]

cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta
in FW_PTP_CMD. Fix it by passing correct sign.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
index 9f9d6cae39d55..758f2b8363282 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
@@ -246,6 +246,9 @@ static int  cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta)
 			     FW_PTP_CMD_PORTID_V(0));
 	c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
 	c.u.ts.sc = FW_PTP_SC_ADJ_FTIME;
+	c.u.ts.sign = (delta < 0) ? 1 : 0;
+	if (delta < 0)
+		delta = -delta;
 	c.u.ts.tm = cpu_to_be64(delta);
 
 	err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/13] qlcnic: Fix bad kzalloc null test

[Sasha Levin]

From: Xu Wang <vulab@iscas.ac.cn>

[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]

In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 07f9067affc65..cda5b0a9e9489 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1720,7 +1720,7 @@ static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_d
 
 	ahw->reset.seq_error = 0;
 	ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL);
-	if (p_dev->ahw->reset.buff == NULL)
+	if (ahw->reset.buff == NULL)
 		return -ENOMEM;
 
 	p_buff = p_dev->ahw->reset.buff;
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/13] i2c: st: fix missing struct parameter description

[Sasha Levin]

From: Alain Volmat <avolmat@me.com>

[ Upstream commit f491c6687332920e296d0209e366fe2ca7eab1c6 ]

Fix a missing struct parameter description to allow
warning free W=1 compilation.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-st.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 9e62f893958aa..81158ae8bfe36 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -437,6 +437,7 @@ static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev)
 /**
  * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode
  * @i2c_dev: Controller's private data
+ * @max: Maximum amount of data to fill into the Tx FIFO
  *
  * This functions fills the Tx FIFO with fixed pattern when
  * in read mode to trigger clock.
-- 
2.20.1