[PATCH tip/core/rcu 0/3] RCU documentation updates for v5.10

[PATCH tip/core/rcu 0/3] RCU documentation updates for v5.10

[Paul E. McKenney]

Hello!

This series provides documentation updates.

1.	Fix typo in synchronize_rcu() function name.

2.	Drop doubled words from RCU Data-Structures.rst.

3.	Drop doubled words from RCU requirements documentation.

							Thanx, Paul

------------------------------------------------------------------------

 Design/Data-Structures/Data-Structures.rst |    2 +-
 Design/Requirements/Requirements.rst       |    4 ++--
 whatisRCU.rst                              |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

[PATCH tip/core/rcu 1/3] docs: Fix typo in synchronize_rcu() function name

[paulmck]

From: Tobias Klauser <tklauser@distanz.ch>

s/sychronize_rcu/synchronize_rcu/

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 Documentation/RCU/whatisRCU.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst
index c7f147b..fb3ff76 100644
--- a/Documentation/RCU/whatisRCU.rst
+++ b/Documentation/RCU/whatisRCU.rst
@@ -360,7 +360,7 @@ order to amortize their overhead over many uses of the corresponding APIs.
 
 There are at least three flavors of RCU usage in the Linux kernel. The diagram
 above shows the most common one. On the updater side, the rcu_assign_pointer(),
-sychronize_rcu() and call_rcu() primitives used are the same for all three
+synchronize_rcu() and call_rcu() primitives used are the same for all three
 flavors. However for protection (on the reader side), the primitives used vary
 depending on the flavor:
 
-- 
2.9.5

[PATCH tip/core/rcu 2/3] doc: Drop doubled words from RCU Data-Structures.rst

[paulmck]

From: Randy Dunlap <rdunlap@infradead.org>

Drop the doubled word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 Documentation/RCU/Design/Data-Structures/Data-Structures.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
index 4a48e20..f4efd68 100644
--- a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
+++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
@@ -963,7 +963,7 @@ exit and perhaps also vice versa. Therefore, whenever the
 ``->dynticks_nesting`` field is incremented up from zero, the
 ``->dynticks_nmi_nesting`` field is set to a large positive number, and
 whenever the ``->dynticks_nesting`` field is decremented down to zero,
-the the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that
+the ``->dynticks_nmi_nesting`` field is set to zero. Assuming that
 the number of misnested interrupts is not sufficient to overflow the
 counter, this approach corrects the ``->dynticks_nmi_nesting`` field
 every time the corresponding CPU enters the idle loop from process
-- 
2.9.5

[PATCH tip/core/rcu 3/3] doc: Drop doubled words from RCU requirements documentation

[paulmck]

From: Randy Dunlap <rdunlap@infradead.org>

Drop the doubled words "to" and "for".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 Documentation/RCU/Design/Requirements/Requirements.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
index 8f41ad0..1ae79a1 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -2162,7 +2162,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
    this sort of thing.
 #. If a CPU is in a portion of the kernel that is absolutely positively
    no-joking guaranteed to never execute any RCU read-side critical
-   sections, and RCU believes this CPU to to be idle, no problem. This
+   sections, and RCU believes this CPU to be idle, no problem. This
    sort of thing is used by some architectures for light-weight
    exception handlers, which can then avoid the overhead of
    ``rcu_irq_enter()`` and ``rcu_irq_exit()`` at exception entry and
@@ -2431,7 +2431,7 @@ However, there are legitimate preemptible-RCU implementations that do
 not have this property, given that any point in the code outside of an
 RCU read-side critical section can be a quiescent state. Therefore,
 *RCU-sched* was created, which follows “classic” RCU in that an
-RCU-sched grace period waits for for pre-existing interrupt and NMI
+RCU-sched grace period waits for pre-existing interrupt and NMI
 handlers. In kernels built with ``CONFIG_PREEMPT=n``, the RCU and
 RCU-sched APIs have identical implementations, while kernels built with
 ``CONFIG_PREEMPT=y`` provide a separate implementation for each.
-- 
2.9.5