[PATCH] regulator: enable compile testing for Maxim and Samsung PMIC drivers

[PATCH] regulator: enable compile testing for Maxim and Samsung PMIC drivers

[Krzysztof Kozlowski]

Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
tested to increase build coverage.  This allows to build them on
configurations without I2C (as I2C is required by dependency - parent
MFD driver).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/regulator/Kconfig | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4efa27b0f9f5..278ae0b06aee 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -510,7 +510,7 @@ config REGULATOR_MAX1586
 
 config REGULATOR_MAX77620
 	tristate "Maxim 77620/MAX20024 voltage regulator"
-	depends on MFD_MAX77620
+	depends on MFD_MAX77620 || COMPILE_TEST
 	help
 	  This driver controls Maxim MAX77620 voltage output regulator
 	  via I2C bus. The provided regulator is suitable for Tegra
@@ -519,7 +519,7 @@ config REGULATOR_MAX77620
 
 config REGULATOR_MAX77650
 	tristate "Maxim MAX77650/77651 regulator support"
-	depends on MFD_MAX77650
+	depends on MFD_MAX77650 || COMPILE_TEST
 	help
 	  Regulator driver for MAX77650/77651 PMIC from Maxim
 	  Semiconductor. This device has a SIMO with three independent
@@ -542,7 +542,7 @@ config REGULATOR_MAX8660
 
 config REGULATOR_MAX8907
 	tristate "Maxim 8907 voltage regulator"
-	depends on MFD_MAX8907
+	depends on MFD_MAX8907 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 8907 voltage output regulator
 	  via I2C bus. The provided regulator is suitable for Tegra
@@ -592,7 +592,7 @@ config REGULATOR_MAX8998
 
 config REGULATOR_MAX77686
 	tristate "Maxim 77686 regulator"
-	depends on MFD_MAX77686
+	depends on MFD_MAX77686 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77686 regulator
 	  via I2C bus. The provided regulator is suitable for
@@ -600,7 +600,7 @@ config REGULATOR_MAX77686
 
 config REGULATOR_MAX77693
 	tristate "Maxim 77693/77843 regulator"
-	depends on (MFD_MAX77693 || MFD_MAX77843)
+	depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
 	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
@@ -609,7 +609,7 @@ config REGULATOR_MAX77693
 
 config REGULATOR_MAX77802
 	tristate "Maxim 77802 regulator"
-	depends on MFD_MAX77686
+	depends on MFD_MAX77686 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77802 regulator
 	  via I2C bus. The provided regulator is suitable for
@@ -941,14 +941,14 @@ config REGULATOR_RT5033
 
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver controls Samsung S2MPA01 voltage output regulator
 	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
 	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 	 output regulator via I2C bus. The chip is comprised of high efficient
@@ -957,7 +957,7 @@ config REGULATOR_S2MPS11
 
 config REGULATOR_S5M8767
 	tristate "Samsung S5M8767A voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver supports a Samsung S5M8767A voltage output regulator
 	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
-- 
2.17.1

Re: [PATCH] regulator: enable compile testing for Maxim and Samsung PMIC drivers

[Mark Brown]

On Sun, 20 Sep 2020 23:41:07 +0200, Krzysztof Kozlowski wrote:
> Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
> tested to increase build coverage.  This allows to build them on
> configurations without I2C (as I2C is required by dependency - parent
> MFD driver).

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: enable compile testing for Maxim and Samsung PMIC drivers
      commit: 0c7d1b4d0c1e7c4309e01532b811392b11b81693

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark