* [PATCH] cpupower: add Makefile dependencies for install targets @ 2021-01-04 23:57 Ivan Babrou 2021-01-07 10:07 ` Thomas Renninger 0 siblings, 1 reply; 7+ messages in thread From: Ivan Babrou @ 2021-01-04 23:57 UTC (permalink / raw) To: linux-pm Cc: linux-kernel, kernel-team, Ivan Babrou, Thomas Renninger, Shuah Khan This allows building cpupower in parallel rather than serially. Signed-off-by: Ivan Babrou <ivan@cloudflare.com> --- tools/power/cpupower/Makefile | 8 ++++---- tools/power/cpupower/bench/Makefile | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index c7bcddbd486d..3b1594447f29 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -270,14 +270,14 @@ clean: $(MAKE) -C bench O=$(OUTPUT) clean -install-lib: +install-lib: libcpupower $(INSTALL) -d $(DESTDIR)${libdir} $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ $(INSTALL) -d $(DESTDIR)${includedir} $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h -install-tools: +install-tools: $(OUTPUT)cpupower $(INSTALL) -d $(DESTDIR)${bindir} $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} $(INSTALL) -d $(DESTDIR)${bash_completion_dir} @@ -293,14 +293,14 @@ install-man: $(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1 $(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 -install-gmo: +install-gmo: create-gmo $(INSTALL) -d $(DESTDIR)${localedir} for HLANG in $(LANGUAGES); do \ echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ $(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ done; -install-bench: +install-bench: compile-bench @#DESTDIR must be set from outside to survive @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile index f68b4bc55273..d9d9923af85c 100644 --- a/tools/power/cpupower/bench/Makefile +++ b/tools/power/cpupower/bench/Makefile @@ -27,7 +27,7 @@ $(OUTPUT)cpufreq-bench: $(OBJS) all: $(OUTPUT)cpufreq-bench -install: +install: $(OUTPUT)cpufreq-bench mkdir -p $(DESTDIR)/$(sbindir) mkdir -p $(DESTDIR)/$(bindir) mkdir -p $(DESTDIR)/$(docdir) -- 2.29.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-04 23:57 [PATCH] cpupower: add Makefile dependencies for install targets Ivan Babrou @ 2021-01-07 10:07 ` Thomas Renninger 2021-01-07 17:42 ` Ivan Babrou 0 siblings, 1 reply; 7+ messages in thread From: Thomas Renninger @ 2021-01-07 10:07 UTC (permalink / raw) To: linux-pm, Ivan Babrou; +Cc: linux-kernel, kernel-team, Ivan Babrou, Shuah Khan Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: > This allows building cpupower in parallel rather than serially. cpupower is built serially: [ make clean ] time make real 0m3,742s user 0m3,330s sys 0m1,105s [ make clean ] time make -j10 real 0m1,045s user 0m3,153s sys 0m1,037s Only advantage I see is that you can call make install-xy targets without calling the corresponding build target make xy similar to the general install target: install: all install-lib ... Not sure anyone needs this and whether all targets successfully work this way. If you'd show a useful usecase example... Thomas > > Signed-off-by: Ivan Babrou <ivan@cloudflare.com> > --- > tools/power/cpupower/Makefile | 8 ++++---- > tools/power/cpupower/bench/Makefile | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile > index c7bcddbd486d..3b1594447f29 100644 > --- a/tools/power/cpupower/Makefile > +++ b/tools/power/cpupower/Makefile > @@ -270,14 +270,14 @@ clean: > $(MAKE) -C bench O=$(OUTPUT) clean > > > -install-lib: > +install-lib: libcpupower > $(INSTALL) -d $(DESTDIR)${libdir} > $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ > $(INSTALL) -d $(DESTDIR)${includedir} > $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h > $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h > > -install-tools: > +install-tools: $(OUTPUT)cpupower > $(INSTALL) -d $(DESTDIR)${bindir} > $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} > $(INSTALL) -d $(DESTDIR)${bash_completion_dir} > @@ -293,14 +293,14 @@ install-man: > $(INSTALL_DATA) -D man/cpupower-info.1 > $(DESTDIR)${mandir}/man1/cpupower-info.1 $(INSTALL_DATA) -D > man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 > > -install-gmo: > +install-gmo: create-gmo > $(INSTALL) -d $(DESTDIR)${localedir} > for HLANG in $(LANGUAGES); do \ > echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo > $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ $(INSTALL_DATA) > -D $(OUTPUT)po/$$HLANG.gmo > $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ done; > > -install-bench: > +install-bench: compile-bench > @#DESTDIR must be set from outside to survive > @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$ (confdir) > $(MAKE) -C bench O=$(OUTPUT) install > > diff --git a/tools/power/cpupower/bench/Makefile > b/tools/power/cpupower/bench/Makefile index f68b4bc55273..d9d9923af85c > 100644 > --- a/tools/power/cpupower/bench/Makefile > +++ b/tools/power/cpupower/bench/Makefile > @@ -27,7 +27,7 @@ $(OUTPUT)cpufreq-bench: $(OBJS) > > all: $(OUTPUT)cpufreq-bench > > -install: > +install: $(OUTPUT)cpufreq-bench > mkdir -p $(DESTDIR)/$(sbindir) > mkdir -p $(DESTDIR)/$(bindir) > mkdir -p $(DESTDIR)/$(docdir) ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-07 10:07 ` Thomas Renninger @ 2021-01-07 17:42 ` Ivan Babrou 2021-01-07 20:59 ` Thomas Renninger 0 siblings, 1 reply; 7+ messages in thread From: Ivan Babrou @ 2021-01-07 17:42 UTC (permalink / raw) To: Thomas Renninger; +Cc: linux-pm, linux-kernel, kernel-team, Shuah Khan On Thu, Jan 7, 2021 at 2:07 AM Thomas Renninger <trenn@suse.com> wrote: > > Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: > > This allows building cpupower in parallel rather than serially. > > cpupower is built serially: > > [ make clean ] > > time make > real 0m3,742s > user 0m3,330s > sys 0m1,105s > > [ make clean ] > > time make -j10 > real 0m1,045s > user 0m3,153s > sys 0m1,037s > > Only advantage I see is that you can call > make install-xy > targets without calling the corresponding build target > make xy > similar to the general install target: > install: all install-lib ... > > Not sure anyone needs this and whether all targets > successfully work this way. > If you'd show a useful usecase example... We build a bunch of kernel related tools (perf, cpupower, bpftool, etc.) from our own top level Makefile, propagating parallelism downwards like one should. Without this patch we have to remove parallelism for cpupower, which doesn't seem like a very clean thing to do, especially if you consider that it's 3x faster with parallelism enabled in wall clock terms. > Thomas > > > > > Signed-off-by: Ivan Babrou <ivan@cloudflare.com> > > --- > > tools/power/cpupower/Makefile | 8 ++++---- > > tools/power/cpupower/bench/Makefile | 2 +- > > 2 files changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile > > index c7bcddbd486d..3b1594447f29 100644 > > --- a/tools/power/cpupower/Makefile > > +++ b/tools/power/cpupower/Makefile > > @@ -270,14 +270,14 @@ clean: > > $(MAKE) -C bench O=$(OUTPUT) clean > > > > > > -install-lib: > > +install-lib: libcpupower > > $(INSTALL) -d $(DESTDIR)${libdir} > > $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ > > $(INSTALL) -d $(DESTDIR)${includedir} > > $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h > > $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h > > > > -install-tools: > > +install-tools: $(OUTPUT)cpupower > > $(INSTALL) -d $(DESTDIR)${bindir} > > $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} > > $(INSTALL) -d $(DESTDIR)${bash_completion_dir} > > @@ -293,14 +293,14 @@ install-man: > > $(INSTALL_DATA) -D man/cpupower-info.1 > > $(DESTDIR)${mandir}/man1/cpupower-info.1 $(INSTALL_DATA) -D > > man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 > > > > -install-gmo: > > +install-gmo: create-gmo > > $(INSTALL) -d $(DESTDIR)${localedir} > > for HLANG in $(LANGUAGES); do \ > > echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo > > $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ $(INSTALL_DATA) > > -D $(OUTPUT)po/$$HLANG.gmo > > $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ done; > > > > -install-bench: > > +install-bench: compile-bench > > @#DESTDIR must be set from outside to survive > > @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$ > (confdir) > > $(MAKE) -C bench O=$(OUTPUT) install > > > > diff --git a/tools/power/cpupower/bench/Makefile > > b/tools/power/cpupower/bench/Makefile index f68b4bc55273..d9d9923af85c > > 100644 > > --- a/tools/power/cpupower/bench/Makefile > > +++ b/tools/power/cpupower/bench/Makefile > > @@ -27,7 +27,7 @@ $(OUTPUT)cpufreq-bench: $(OBJS) > > > > all: $(OUTPUT)cpufreq-bench > > > > -install: > > +install: $(OUTPUT)cpufreq-bench > > mkdir -p $(DESTDIR)/$(sbindir) > > mkdir -p $(DESTDIR)/$(bindir) > > mkdir -p $(DESTDIR)/$(docdir) > > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-07 17:42 ` Ivan Babrou @ 2021-01-07 20:59 ` Thomas Renninger 2021-01-07 21:15 ` Ivan Babrou 0 siblings, 1 reply; 7+ messages in thread From: Thomas Renninger @ 2021-01-07 20:59 UTC (permalink / raw) To: Ivan Babrou; +Cc: linux-pm, linux-kernel, kernel-team, Shuah Khan Am Donnerstag, 7. Januar 2021, 18:42:25 CET schrieb Ivan Babrou: > On Thu, Jan 7, 2021 at 2:07 AM Thomas Renninger <trenn@suse.com> wrote: > > Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: > > > This allows building cpupower in parallel rather than serially. > > > > cpupower is built serially: > > > > [ make clean ] > > > > time make > > real 0m3,742s > > user 0m3,330s > > sys 0m1,105s > > > > [ make clean ] > > > > time make -j10 > > real 0m1,045s > > user 0m3,153s > > sys 0m1,037s > > > > Only advantage I see is that you can call > > make install-xy > > targets without calling the corresponding build target > > make xy > > similar to the general install target: > > install: all install-lib ... > > > > Not sure anyone needs this and whether all targets > > successfully work this way. > > If you'd show a useful usecase example... > > We build a bunch of kernel related tools (perf, cpupower, bpftool, > etc.) from our own top level Makefile, propagating parallelism > downwards like one should. I still do not understand why you do not simply build: Also if I call this from /tools directory I get a quick build: make -j20 cpupower Can you please show the make calls, ideally with a timing to better understand and also to reproduce the advantages this patch introduces. From what I can see, it only helps if one calls "sub-install" targets directly? And I still do not understand why things should be more parallel now. > Without this patch we have to remove parallelism for cpupower, Why? > which doesn't seem like a very clean thing > to do, especially if you consider that it's 3x faster with parallelism > enabled in wall clock terms. Sure, you want to build in parallel. I still do not understand how this patch helps in this regard. BTW, I recently had a bunch of userspace tools Makefile patches. I'd like to add you to CC for a review if they are not submitted already. Thomas ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-07 20:59 ` Thomas Renninger @ 2021-01-07 21:15 ` Ivan Babrou 2021-01-07 21:29 ` Thomas Renninger 0 siblings, 1 reply; 7+ messages in thread From: Ivan Babrou @ 2021-01-07 21:15 UTC (permalink / raw) To: Thomas Renninger; +Cc: linux-pm, linux-kernel, kernel-team, Shuah Khan On Thu, Jan 7, 2021 at 12:59 PM Thomas Renninger <trenn@suse.com> wrote: > > Am Donnerstag, 7. Januar 2021, 18:42:25 CET schrieb Ivan Babrou: > > On Thu, Jan 7, 2021 at 2:07 AM Thomas Renninger <trenn@suse.com> wrote: > > > Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: > > > > This allows building cpupower in parallel rather than serially. > > > > > > cpupower is built serially: > > > > > > [ make clean ] > > > > > > time make > > > real 0m3,742s > > > user 0m3,330s > > > sys 0m1,105s > > > > > > [ make clean ] > > > > > > time make -j10 > > > real 0m1,045s > > > user 0m3,153s > > > sys 0m1,037s > > > > > > Only advantage I see is that you can call > > > make install-xy > > > targets without calling the corresponding build target > > > make xy > > > similar to the general install target: > > > install: all install-lib ... > > > > > > Not sure anyone needs this and whether all targets > > > successfully work this way. > > > If you'd show a useful usecase example... > > > > We build a bunch of kernel related tools (perf, cpupower, bpftool, > > etc.) from our own top level Makefile, propagating parallelism > > downwards like one should. > I still do not understand why you do not simply build: > Also if I call this from /tools directory I get a quick build: > make -j20 cpupower > > Can you please show the make calls, ideally with a timing to better understand > and also to reproduce the advantages this patch introduces. > From what I can see, it only helps if one calls "sub-install" targets > directly? That's exactly what we do: make install directly: /linux-5.10.5$ make -C ./tools/power/cpupower DESTDIR=/tmp/cpupower install -j $(nproc) make: Entering directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower' CC cpupower MSGFMT po/de.gmo MSGFMT po/fr.gmo MSGFMT po/it.gmo MSGFMT po/cs.gmo /usr/bin/install -c -d /tmp/cpupower/usr/lib64 MSGFMT po/pt.gmo /usr/bin/install -c -d /tmp/cpupower/usr/bin /usr/bin/install -c -m 644 -D man/cpupower.1 /tmp/cpupower/usr/man/man1/cpupower.1 /usr/bin/install -c -d /tmp/cpupower/usr/share/locale cp -fpR ./libcpupower.so* /tmp/cpupower/usr/lib64/ /usr/bin/install -c ./cpupower /tmp/cpupower/usr/bin /usr/bin/install -c -m 644 -D man/cpupower-frequency-set.1 /tmp/cpupower/usr/man/man1/cpupower-frequency-set.1 make[1]: Entering directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower/bench' for HLANG in de fr it cs pt; do \ echo '/usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo'; \ /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo; \ done; CC main.o /usr/bin/install -c -d /tmp/cpupower/usr/share/bash-completion/completions /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo CC parse.o /usr/bin/install -c -m 644 -D man/cpupower-frequency-info.1 /tmp/cpupower/usr/man/man1/cpupower-frequency-info.1 CC system.o /usr/bin/install: cannot stat './po/de.gmo'/usr/bin/install -c -d /tmp/cpupower/usr/include : No such file or directory make[1]: Entering directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower/bench' mkdir -p /tmp/cpupower//usr/sbin /usr/bin/install -c -m 644 cpupower-completion.sh '/tmp/cpupower/usr/share/bash-completion/completions/cpupower' /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo CC benchmark.o /usr/bin/install -c -m 644 -D man/cpupower-idle-set.1 /tmp/cpupower/usr/man/man1/cpupower-idle-set.1 /usr/bin/install: cannot stat './po/fr.gmo': No such file or directory /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo mkdir -p /tmp/cpupower//usr/bin /usr/bin/install -c -m 644 lib/cpufreq.h /tmp/cpupower/usr/include/cpufreq.h /usr/bin/install -c -m 644 -D man/cpupower-idle-info.1 /tmp/cpupower/usr/man/man1/cpupower-idle-info.1 mkdir -p /tmp/cpupower//usr/share/doc/packages/cpupower /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo /usr/bin/install -c -m 644 lib/cpuidle.h /tmp/cpupower/usr/include/cpuidle.h mkdir -p /tmp/cpupower//etc/ /usr/bin/install -c -m 644 -D man/cpupower-set.1 /tmp/cpupower/usr/man/man1/cpupower-set.1 /usr/bin/install -c -m 644 -D ./po/$HLANG.gmo /tmp/cpupower/usr/share/locale/$HLANG/LC_MESSAGES/cpupower.mo install -m 755 .//cpufreq-bench /tmp/cpupower//usr/sbin/cpufreq-bench /usr/bin/install -c -m 644 -D man/cpupower-info.1 /tmp/cpupower/usr/man/man1/cpupower-info.1 /usr/bin/install -c -m 644 -D man/cpupower-monitor.1 /tmp/cpupower/usr/man/man1/cpupower-monitor.1 install: cannot stat './/cpufreq-bench': No such file or directory Makefile:31: recipe for target 'install' failed make[1]: *** [install] Error 1 make[1]: Leaving directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower/bench' Makefile:304: recipe for target 'install-bench' failed make: *** [install-bench] Error 2 make: *** Waiting for unfinished jobs.... CC cpufreq-bench make[1]: Leaving directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower/bench' make: Leaving directory '/state/home/ivan/linux-5.10.5/tools/power/cpupower' It works with -j 1. My patch makes it work with arbitrary parallelism, same as any other tool we build internally (perf, bpftool, turbostat, etc.). > And I still do not understand why things should be more parallel now. > > > Without this patch we have to remove parallelism for cpupower, > Why? > > > which doesn't seem like a very clean thing > > to do, especially if you consider that it's 3x faster with parallelism > > enabled in wall clock terms. > Sure, you want to build in parallel. I still do not understand how this > patch helps in this regard. > > BTW, I recently had a bunch of userspace tools Makefile patches. > I'd like to add you to CC for a review if they are not submitted already. Don't know how useful I can be, but feel free to. > Thomas > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-07 21:15 ` Ivan Babrou @ 2021-01-07 21:29 ` Thomas Renninger 2021-01-22 18:02 ` Shuah Khan 0 siblings, 1 reply; 7+ messages in thread From: Thomas Renninger @ 2021-01-07 21:29 UTC (permalink / raw) To: Ivan Babrou; +Cc: linux-pm, linux-kernel, kernel-team, Shuah Khan, rafael Am Donnerstag, 7. Januar 2021, 22:15:16 CET schrieb Ivan Babrou: > On Thu, Jan 7, 2021 at 12:59 PM Thomas Renninger <trenn@suse.com> wrote: > > Am Donnerstag, 7. Januar 2021, 18:42:25 CET schrieb Ivan Babrou: > > > On Thu, Jan 7, 2021 at 2:07 AM Thomas Renninger <trenn@suse.com> wrote: > > > > Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: > > > > > This allows building cpupower in parallel rather than serially. ... > > Can you please show the make calls, ideally with a timing to better > > understand and also to reproduce the advantages this patch introduces. > > From what I can see, it only helps if one calls "sub-install" targets > > directly? > > That's exactly what we do: make install directly: > > /linux-5.10.5$ make -C ./tools/power/cpupower DESTDIR=/tmp/cpupower > install -j $(nproc) This makes sense then. @Shuah @Rafael: Can this patch be queued up, please. Thanks for the patch and the details, Thomas ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] cpupower: add Makefile dependencies for install targets 2021-01-07 21:29 ` Thomas Renninger @ 2021-01-22 18:02 ` Shuah Khan 0 siblings, 0 replies; 7+ messages in thread From: Shuah Khan @ 2021-01-22 18:02 UTC (permalink / raw) To: Thomas Renninger, Ivan Babrou Cc: linux-pm, linux-kernel, kernel-team, Shuah Khan, rafael, Shuah Khan On 1/7/21 2:29 PM, Thomas Renninger wrote: > Am Donnerstag, 7. Januar 2021, 22:15:16 CET schrieb Ivan Babrou: >> On Thu, Jan 7, 2021 at 12:59 PM Thomas Renninger <trenn@suse.com> wrote: >>> Am Donnerstag, 7. Januar 2021, 18:42:25 CET schrieb Ivan Babrou: >>>> On Thu, Jan 7, 2021 at 2:07 AM Thomas Renninger <trenn@suse.com> wrote: >>>>> Am Dienstag, 5. Januar 2021, 00:57:18 CET schrieb Ivan Babrou: >>>>>> This allows building cpupower in parallel rather than serially. > ... >>> Can you please show the make calls, ideally with a timing to better >>> understand and also to reproduce the advantages this patch introduces. >>> From what I can see, it only helps if one calls "sub-install" targets >>> directly? >> >> That's exactly what we do: make install directly: >> >> /linux-5.10.5$ make -C ./tools/power/cpupower DESTDIR=/tmp/cpupower >> install -j $(nproc) > > This makes sense then. > @Shuah @Rafael: Can this patch be queued up, please. > > Thanks for the patch and the details, > Thank you both. I applied it https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux.git/commit/?h=cpupower Will send this in my next pull request to Rafael. thanks, -- Shuah ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-22 18:07 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-01-04 23:57 [PATCH] cpupower: add Makefile dependencies for install targets Ivan Babrou 2021-01-07 10:07 ` Thomas Renninger 2021-01-07 17:42 ` Ivan Babrou 2021-01-07 20:59 ` Thomas Renninger 2021-01-07 21:15 ` Ivan Babrou 2021-01-07 21:29 ` Thomas Renninger 2021-01-22 18:02 ` Shuah Khan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox