From: Michael Walle <michael@walle.cc>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Michael Walle <michael@walle.cc>
Subject: [PATCH net-next v3 6/9] net: phy: icplus: don't set APS_EN bit on IP101G
Date: Wed, 10 Feb 2021 22:08:06 +0100 [thread overview]
Message-ID: <20210210210809.30125-7-michael@walle.cc> (raw)
In-Reply-To: <20210210210809.30125-1-michael@walle.cc>
This bit is reserved as 'always-write-1'. While this is not a particular
error, because we are only setting it, guard it by checking the model to
prevent errors in the future.
Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v2:
- none
Changes since v1:
- dropped the model check. Instead use two different functions.
Andrew, I've dropped your Reviewed-by because of this.
drivers/net/phy/icplus.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index dee4f4d988a2..bc2b58061507 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -208,10 +208,10 @@ static int ip101a_g_probe(struct phy_device *phydev)
return 0;
}
-static int ip101a_g_config_init(struct phy_device *phydev)
+static int ip101a_g_config_intr_pin(struct phy_device *phydev)
{
struct ip101a_g_phy_priv *priv = phydev->priv;
- int err, c;
+ int err;
/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
switch (priv->sel_intr32) {
@@ -241,11 +241,24 @@ static int ip101a_g_config_init(struct phy_device *phydev)
break;
}
+ return 0;
+}
+
+static int ip101a_config_init(struct phy_device *phydev)
+{
+ int ret;
+
/* Enable Auto Power Saving mode */
- c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
- c |= IP101A_G_APS_ON;
+ ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON);
+ if (ret)
+ return ret;
- return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+ return ip101a_g_config_intr_pin(phydev);
+}
+
+static int ip101g_config_init(struct phy_device *phydev)
+{
+ return ip101a_g_config_intr_pin(phydev);
}
static int ip101a_g_ack_interrupt(struct phy_device *phydev)
@@ -379,7 +392,7 @@ static struct phy_driver icplus_driver[] = {
.probe = ip101a_g_probe,
.config_intr = ip101a_g_config_intr,
.handle_interrupt = ip101a_g_handle_interrupt,
- .config_init = ip101a_g_config_init,
+ .config_init = ip101a_config_init,
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -389,7 +402,7 @@ static struct phy_driver icplus_driver[] = {
.probe = ip101a_g_probe,
.config_intr = ip101a_g_config_intr,
.handle_interrupt = ip101a_g_handle_interrupt,
- .config_init = ip101a_g_config_init,
+ .config_init = ip101g_config_init,
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.20.1
next prev parent reply other threads:[~2021-02-10 21:12 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 21:08 [PATCH net-next v2 0/9] net: phy: icplus: cleanups and new features Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 1/9] net: phy: icplus: use PHY_ID_MATCH_MODEL() macro Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 2/9] net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/G Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 3/9] net: phy: icplus: drop address operator for functions Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 4/9] net: phy: icplus: use the .soft_reset() of the phy-core Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 5/9] net: phy: icplus: split IP101A/G driver Michael Walle
2021-02-10 21:08 ` Michael Walle [this message]
2021-02-10 23:49 ` [PATCH net-next v3 6/9] net: phy: icplus: don't set APS_EN bit on IP101G Andrew Lunn
2021-02-10 21:08 ` [PATCH net-next v3 7/9] net: phy: icplus: fix paged register access Michael Walle
2021-02-10 23:21 ` kernel test robot
2021-02-10 23:55 ` Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 8/9] net: phy: icplus: add PHY counter for IP101G Michael Walle
2021-02-10 21:08 ` [PATCH net-next v3 9/9] net: phy: icplus: add MDI/MDIX support for IP101A/G Michael Walle
2021-02-11 0:13 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210210809.30125-7-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox