[PATCH v2 0/2] device property: Adding fwnode_irq_get_byname()

[Puranjay Mohan <puranjay12@gmail.com>]

The first patch in this series adds the fwnode_irq_get_byname() which is
the generic version of the of_irq_get_byname(). It is used to get the
IRQ number from name of the interrupt.

The second patch in this series uses the fwnode_irq_get_byname()
function in the IIO driver of the ADXL355 accelerometer. The driver has
been tested after applying this patch on a Raspberry PI. The ADXL355 was
connected to the Raspberry Pi using I2C and fwnode_irq_get_byname() was
used to get the IRQ number for the "DRDY" interrupt. Earlier this driver
was using of_irq_get_byname() to get this IRQ number.

Puranjay Mohan (2):
  device property: Add fwnode_irq_get_byname()
  iio: accel: adxl355: use fwnode_irq_get_byname()

 drivers/base/property.c          | 23 +++++++++++++++++++++++
 drivers/iio/accel/adxl355_core.c |  7 ++-----
 include/linux/property.h         |  2 ++
 3 files changed, 27 insertions(+), 5 deletions(-)

-- 
2.30.1