From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 09/13] arm64: dts: qcom: sm8450: add interconnect nodes
Date: Thu, 9 Dec 2021 16:05:01 +0530 [thread overview]
Message-ID: <20211209103505.197453-10-vkoul@kernel.org> (raw)
In-Reply-To: <20211209103505.197453-1-vkoul@kernel.org>
And the various interconnect nodes found in SM8450 SoC and use it for
UFS controller.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 80 ++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9556d2fc46e0..f75de777f6ea 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -573,6 +574,61 @@ uart7: serial@99c000 {
};
};
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm8450-config-noc";
+ reg = <0 0x01500000 0 0x1c000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@1580000 {
+ compatible = "qcom,sm8450-mc-virt";
+ reg = <0 0x01580000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,sm8450-system-noc";
+ reg = <0 0x01680000 0 0x1e200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ pcie_noc: interconnect@16c0000 {
+ compatible = "qcom,sm8450-pcie-anoc";
+ reg = <0 0x016c0000 0 0xe280>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sm8450-aggre1-noc";
+ reg = <0 0x016e0000 0 0x1c080>;
+ #interconnect-cells = <1>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sm8450-aggre2-noc";
+ reg = <0 0x01700000 0 0x31080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&rpmhcc RPMH_IPA_CLK>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,sm8450-mmss-noc";
+ reg = <0 0x01740000 0 0x1f080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -816,6 +872,13 @@ rpmhcc: clock-controller {
};
};
+ gem_noc: interconnect@19100000 {
+ compatible = "qcom,sm8450-gem-noc";
+ reg = <0 0x19100000 0 0xbb800>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -832,6 +895,9 @@ ufs_mem_hc: ufshc@1d84000 {
iommus = <&apps_smmu 0xe0 0x0>;
+ interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
clock-names =
"core_clk",
"bus_aggr_clk",
@@ -887,6 +953,20 @@ ufs_mem_phy_lanes: lanes@1d87400 {
#clock-cells = <0>;
};
};
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,sm8450-nsp-noc";
+ reg = <0 0x320c0000 0 0x10000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,sm8450-lpass-ag-noc";
+ reg = <0 0x3c40000 0 0x17200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
};
timer {
--
2.31.1
next prev parent reply other threads:[~2021-12-09 10:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-09 10:34 [PATCH v2 00/13] arm64: dts: qcom: Add support for SM8450 SoC and QRD board Vinod Koul
2021-12-09 10:34 ` [PATCH v2 01/13] arm64: dts: qcom: Add base SM8450 DTSI Vinod Koul
2021-12-09 10:34 ` [PATCH v2 02/13] arm64: dts: qcom: sm8450: Add tlmm nodes Vinod Koul
2021-12-09 10:34 ` [PATCH v2 03/13] arm64: dts: qcom: sm8450: Add reserved memory nodes Vinod Koul
2021-12-09 10:34 ` [PATCH v2 04/13] arm64: dts: qcom: sm8450: add smmu nodes Vinod Koul
2021-12-09 10:34 ` [PATCH v2 05/13] arm64: dts: qcom: Add base SM8450 QRD DTS Vinod Koul
2021-12-09 23:06 ` kernel test robot
2021-12-10 3:13 ` kernel test robot
2021-12-09 10:34 ` [PATCH v2 06/13] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes Vinod Koul
2021-12-09 10:34 ` [PATCH v2 07/13] arm64: dts: qcom: sm8450: add ufs nodes Vinod Koul
2021-12-09 10:35 ` [PATCH v2 08/13] arm64: dts: qcom: sm8450-qrd: enable " Vinod Koul
2021-12-09 10:35 ` Vinod Koul [this message]
2021-12-09 15:46 ` [PATCH v2 09/13] arm64: dts: qcom: sm8450: add interconnect nodes Konrad Dybcio
2021-12-10 9:37 ` Georgi Djakov
2021-12-09 10:35 ` [PATCH v2 10/13] arm64: dts: qcom: sm8450: add spmi node Vinod Koul
2022-10-24 14:56 ` Krzysztof Kozlowski
2022-10-24 15:06 ` konrad.dybcio
2022-10-24 16:16 ` Krzysztof Kozlowski
2022-10-24 16:45 ` Dmitry Baryshkov
2022-10-24 16:46 ` Krzysztof Kozlowski
2022-10-24 16:48 ` Dmitry Baryshkov
2022-10-24 18:56 ` Krzysztof Kozlowski
2022-10-24 18:58 ` Dmitry Baryshkov
2022-10-26 5:33 ` Vinod Koul
2022-11-17 14:57 ` Konrad Dybcio
2022-11-18 9:16 ` Konrad Dybcio
2021-12-09 10:35 ` [PATCH v2 11/13] arm64: dts: qcom: sm8450: Add rpmhpd node Vinod Koul
2021-12-09 10:35 ` [PATCH v2 12/13] arm64: dts: qcom: sm8450: add cpufreq support Vinod Koul
2021-12-09 10:35 ` [PATCH v2 13/13] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes Vinod Koul
2021-12-09 15:47 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211209103505.197453-10-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox