[PATCH v2 1/3] spi: dln2: Propagate firmware node

[PATCH v2 1/3] spi: dln2: Propagate firmware node

[Andy Shevchenko]

Propagate firmware node by using a specific API call, i.e. device_set_node().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: included property.h to avoid compilation error (Mark)
 drivers/spi/spi-dln2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dln2.c b/drivers/spi/spi-dln2.c
index 3ff63ab82f4f..0a1fb2bc9e54 100644
--- a/drivers/spi/spi-dln2.c
+++ b/drivers/spi/spi-dln2.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/mfd/dln2.h>
 #include <linux/spi/spi.h>
 #include <linux/pm_runtime.h>
@@ -688,6 +689,8 @@ static int dln2_spi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
+	device_set_node(&master->dev, dev_fwnode(dev));
+
 	platform_set_drvdata(pdev, master);
 
 	dln2 = spi_master_get_devdata(master);
@@ -699,7 +702,6 @@ static int dln2_spi_probe(struct platform_device *pdev)
 	}
 
 	dln2->master = master;
-	dln2->master->dev.of_node = dev->of_node;
 	dln2->pdev = pdev;
 	dln2->port = pdata->port;
 	/* cs/mode can never be 0xff, so the first transfer will set them */
-- 
2.34.1

[PATCH v2 2/3] spi: dw: Propagate firmware node

[Andy Shevchenko]

Propagate firmware node by using a specific API call, i.e. device_set_node().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: no changes
 drivers/spi/spi-dw-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 934cc7a922e8..ecea471ff42c 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -895,6 +895,8 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	if (!master)
 		return -ENOMEM;
 
+	device_set_node(&master->dev, dev_fwnode(dev));
+
 	dws->master = master;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
 
@@ -931,8 +933,6 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	if (dws->mem_ops.exec_op)
 		master->mem_ops = &dws->mem_ops;
 	master->max_speed_hz = dws->max_freq;
-	master->dev.of_node = dev->of_node;
-	master->dev.fwnode = dev->fwnode;
 	master->flags = SPI_MASTER_GPIO_SS;
 	master->auto_runtime_pm = true;
 
-- 
2.34.1

Re: [PATCH v2 2/3] spi: dw: Propagate firmware node

[Serge Semin]

On Wed, Dec 22, 2021 at 05:57:38PM +0200, Andy Shevchenko wrote:
> Propagate firmware node by using a specific API call, i.e. device_set_node().

Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>

-Sergey

> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> v2: no changes
>  drivers/spi/spi-dw-core.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index 934cc7a922e8..ecea471ff42c 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -895,6 +895,8 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
>  	if (!master)
>  		return -ENOMEM;
>  
> +	device_set_node(&master->dev, dev_fwnode(dev));
> +
>  	dws->master = master;
>  	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
>  
> @@ -931,8 +933,6 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
>  	if (dws->mem_ops.exec_op)
>  		master->mem_ops = &dws->mem_ops;
>  	master->max_speed_hz = dws->max_freq;
> -	master->dev.of_node = dev->of_node;
> -	master->dev.fwnode = dev->fwnode;
>  	master->flags = SPI_MASTER_GPIO_SS;
>  	master->auto_runtime_pm = true;
>  
> -- 
> 2.34.1
> 

[PATCH v2 3/3] spi: pxa2xx: Propagate firmware node

[Andy Shevchenko]

Propagate firmware node by using a specific API call, i.e. device_set_node().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: no changes
 drivers/spi/spi-pxa2xx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b3186bd0c2a8..e88f86274eeb 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1664,8 +1664,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	drv_data->controller_info = platform_info;
 	drv_data->ssp = ssp;
 
-	controller->dev.of_node = dev->of_node;
-	controller->dev.fwnode = dev->fwnode;
+	device_set_node(&controller->dev, dev_fwnode(dev));
 
 	/* The spi->mode bits understood by this driver: */
 	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
-- 
2.34.1

Re: [PATCH v2 1/3] spi: dln2: Propagate firmware node

[Mark Brown]

On Wed, 22 Dec 2021 17:57:37 +0200, Andy Shevchenko wrote:
> Propagate firmware node by using a specific API call, i.e. device_set_node().
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/3] spi: dln2: Propagate firmware node
      commit: e6609c26b3ab71aa3ef2f7f9524a066a863a7f18
[2/3] spi: dw: Propagate firmware node
      commit: 27b6965ccb72e658eb2235f564a04d2775c956cf
[3/3] spi: pxa2xx: Propagate firmware node
      commit: 12baee68b2df6847f9a26ee82f30aa5f52c6d0d2

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark