[PATCH v2 1/3] drm/vkms: refactor overlay plane creation

[PATCH v2 1/3] drm/vkms: refactor overlay plane creation

[José Expósito]

Move the logic to create an overlay plane to its own function.
Refactor, no functional changes.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
---
 drivers/gpu/drm/vkms/vkms_output.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index 04406bd3ff02..2e805b2d36ae 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -32,6 +32,21 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
 	.get_modes    = vkms_conn_get_modes,
 };
 
+static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
+				  struct drm_crtc *crtc)
+{
+	struct vkms_plane *overlay;
+
+	overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
+	if (IS_ERR(overlay))
+		return PTR_ERR(overlay);
+
+	if (!overlay->base.possible_crtcs)
+		overlay->base.possible_crtcs = drm_crtc_mask(crtc);
+
+	return 0;
+}
+
 int vkms_output_init(struct vkms_device *vkmsdev, int index)
 {
 	struct vkms_output *output = &vkmsdev->output;
@@ -39,7 +54,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
 	struct drm_connector *connector = &output->connector;
 	struct drm_encoder *encoder = &output->encoder;
 	struct drm_crtc *crtc = &output->crtc;
-	struct vkms_plane *primary, *cursor = NULL, *overlay = NULL;
+	struct vkms_plane *primary, *cursor = NULL;
 	int ret;
 	int writeback;
 
@@ -48,12 +63,9 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
 		return PTR_ERR(primary);
 
 	if (vkmsdev->config->overlay) {
-		overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
-		if (IS_ERR(overlay))
-			return PTR_ERR(overlay);
-
-		if (!overlay->base.possible_crtcs)
-			overlay->base.possible_crtcs = drm_crtc_mask(crtc);
+		ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
+		if (ret)
+			return ret;
 	}
 
 	if (vkmsdev->config->cursor) {
-- 
2.25.1

[PATCH v2 2/3] drm/vkms: add support for multiple overlay planes

[José Expósito]

Create 8 overlay planes instead of 1 when the "enable_overlay" module
parameter is set.

The following igt-gpu-tools tests were executed without finding
regressions. Notice than the numbers are identical:

                    |     master branch     |      this  patch      |
                    | SUCCESS | SKIP | FAIL | SUCCESS | SKIP | FAIL |
 kms_atomic         |      10 |   02 |   00 |      10 |   02 |   00 |
 kms_plane_cursor   |      09 |   45 |   00 |      09 |   45 |   00 |
 kms_plane_multiple |      01 |   23 |   00 |      01 |   23 |   00 |
 kms_writeback      |      04 |   00 |   00 |      04 |   00 |   00 |

Signed-off-by: José Expósito <jose.exposito89@gmail.com>

---

v2:

 - Set the number of overlay planes as a constant instead of as a
   module parameter (Melissa Wen)

 - Add a test results in the commit message (Melissa Wen)
---
 drivers/gpu/drm/vkms/vkms_drv.h    | 2 ++
 drivers/gpu/drm/vkms/vkms_output.c | 9 ++++++---
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
index d48c23d40ce5..9496fdc900b8 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.h
+++ b/drivers/gpu/drm/vkms/vkms_drv.h
@@ -20,6 +20,8 @@
 #define XRES_MAX  8192
 #define YRES_MAX  8192
 
+#define NUM_OVERLAY_PLANES 8
+
 struct vkms_writeback_job {
 	struct dma_buf_map map[DRM_FORMAT_MAX_PLANES];
 	struct dma_buf_map data[DRM_FORMAT_MAX_PLANES];
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index 2e805b2d36ae..ba0e82ae549a 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -57,15 +57,18 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
 	struct vkms_plane *primary, *cursor = NULL;
 	int ret;
 	int writeback;
+	unsigned int n;
 
 	primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
 	if (IS_ERR(primary))
 		return PTR_ERR(primary);
 
 	if (vkmsdev->config->overlay) {
-		ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
-		if (ret)
-			return ret;
+		for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
+			ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
+			if (ret)
+				return ret;
+		}
 	}
 
 	if (vkmsdev->config->cursor) {
-- 
2.25.1

[PATCH v2 3/3] drm/vkms: drop "Multiple overlay planes" TODO

[José Expósito]

Remove the task from the TODO list.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
---
 Documentation/gpu/vkms.rst | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
index 941f0e7e5eef..9c873c3912cc 100644
--- a/Documentation/gpu/vkms.rst
+++ b/Documentation/gpu/vkms.rst
@@ -124,8 +124,6 @@ Add Plane Features
 
 There's lots of plane features we could add support for:
 
-- Multiple overlay planes. [Good to get started]
-
 - Clearing primary plane: clear primary plane before plane composition (at the
   start) for correctness of pixel blend ops. It also guarantees alpha channel
   is cleared in the target buffer for stable crc. [Good to get started]
-- 
2.25.1